Possible error with gyroscope

Hi, I'm sorry my English please.
In March 20, my phone will have 1 year.
These days I've been testing an app and gyroscope use to fail sometimes in Y axis and sometimes in Z axis. I spoke with developers' app and they are working in but I would like to know if my iPhone's gyroscope is really failed, could guaranty cover the fail for repair or replace it? I'm using the last version of iOS
Thanks!

Take it to Apple prior to Mar 20 and ask them to check it out for you.

Similar Messages

Possible error with viewing same site on desktop and iPad

Site is viewing correctly on desktop but on iPad everything not pinned is being pushed to left with white space to the right of page.
There are no hidden or active elements off the page anywhere..

Here is an observation.
With Acrobat Reader 11.0.02 installed on OS X 10.8.2 and Windows 7 (with latest updates), the reported default page display resolution in Reader's preferences is 81 for OS X, and 96 for Windows. What this means in English is that PDF that are viewed on OS X appear noticeably smaller than when viewed at 96 ppi. Like looking backwards through binoculars.
What happens if you adjust the Reader custom display resolution to 96 ppi. Does this improve the visuals with Windows counterparts?
On IOS, and in particular, later models of iPad and iPhone, you are looking at PDF at default display resolutions upwards to 326 ppi. I would hope that the PDF look sharper on IOS 5/6 than they do on OS X. Try setting the custom display resolution in Adobe Reader on OS X to 326 ppi. Notice any sharper (albeit) huge resolution difference?
Are you requesting the “Best” setting for Pages PDF export, or “Better.” There is a 150 ppi resolution difference for text in those settings.

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?? Thanks, Jörg

Hi Jorg ,
Are you trying to reduce the file size with the "Reduced size PDF" in the save as other option.
Give it a try if you haven't done it prior.
Open that PDF>File>Save as Other>Reduced size PDF.
If possible ,please share the snapshot of the error message with us so that we can have a look in order to assist you further.
Regards
Sukrit Dhingra

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":

Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix.

Error With Export/Print from Crystal Report Viewer

Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
   <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
   AutoDataBind="true" EnableDatabaseLogonPrompt="False"
   BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
    public partial class Reports : System.Web.UI.Page
        protected override void OnInit(EventArgs e)
            base.OnInit(e);
            if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                SessionMgr sessionMgr = new SessionMgr();
                EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                if (reportService != null)
                    string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                       + "Where SI_PROGID='CrystalEnterprise.Report' "
                       + "And SI_ID = {0} "
                       + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                    InfoObjects infoObjects = infoStore.Query(queryString);
                    ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                    if (infoObjects != null && infoObjects.Count > 0)
                        ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                        Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                        CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                        CrystalReportViewer1.DataBind();
            //Viewer options
            // Don't enable prompting for Live and Custom
            CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
            CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
            CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
        protected void Page_Load(object sender, EventArgs e)
            if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                CrystalReportViewer1.DataBind();
        private bool AssignReportParameters(ISCDReportClientDocument reportSource)
            bool success = true;
            if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                if (Request.QueryString["t"] == "2")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
            else if (Request.QueryString["t"] == "3")
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
            else
                //Unknown report type alert
                success = false;
            return success;

Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice,

JSPM Error with SAP-JEE component SP16

Hi
I am depolying a queue in JSPM SP16.1 for an ECC6 700 SR3 installed ABAP/Java system and it errors with the component SAP-JEE SP16 (installed level is SP14 as delivered in the SR3 kit)
The log has the messages:
Oct 8, 2008 1:49:57 PM Warning: Caught CVersProxyAccessException while saving repository: CVersAccessException: Cannot access CVers due to missing or incorrect configuration.
Additional error message is:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Creation of DataSource for database "WFQ" failed. (com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..)
regards
Michael

Hi Philipp
My version is 700 and the database is DB2/400 for IBM System i.
The sapcrypto is treated differently on this platform, so I havent done anything with it as yet.
I logged a message with SAP which has gone to the BC-JAS-SEC queue and the reply I received is below. Please let me know if this has helped you as I have not had the chance to get back to the system to try these steps :
regards
Michael.
To do the further investigation, may I check info below with you:
- are you able to read the content of the
/sapbwtest/global/security/lib/tools/iaik_jce.jar file with jar
- do you have the full strength JCE files installed for this JDK?
See note: 739043
- What user is used to connect to the Database from the java side in
the secure store? check if the password is correct or the user
is unlocked.
Make sure the connection details in Secure Store are the correct ones
you can check it in the config tool:
the jdbc/pool/<SID>/Password and jdbc/pool/<SID>/User
Edited by: Michael Power on Oct 15, 2008 8:52 PM

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Thanks Tim,
I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
At the moment the most recurrent problem is this:
http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
which has been longly speculated here:
http://forum.thinkpads.com/viewtopic.php?t=47755
My other angst is the boot-time chkdsk hang-up problem:
http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
This is my T61p configuration:
Intel Core 2 Duo T7700 2.4GHz
BIOS version 1.26-1.06
4GB RAM 2 SO-DIMMs
nVidia Quadro FX 570m with 512MB VRAM
WUXGA LCD
Seagate 7200.2 160 GB
4GB RAM 2 SO-DIMMs
Windows Vista Ultimate 32bit (waiting to move to 64bit)
thanks,
andrea
Message Edited by abarbieri on 12-05-2007 03:48 PM
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

Valuation with material cost estimate: error with product "117122"

Hi people,
We have the error:
=====================
Valuation with material cost estimate: error with product "117122"
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
We have the follow configuration in trans.: KE40:
. Determine material cost estimate
   . Transf. Standard Cost Estimate
. Costing Variant
. Control Data for Standard Cost Estimate
   . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
. Addiitonal data CO-PC
    . Transfer cost estimate in controlling area currency "activated"
We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
Do you know what happend?
If we need to configure some transation, or sonly process the cost estimate?
Thanks,
Rosana.

Hello Guido
Thank you very much for your return.
It is happenning in a Client that some people are doing the configuration.
Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
And now, the people activate that in this new Client and I don't know the impact about that.
I think we have to make the configuration in OKYW.
The other transation you told me, we don't have any information.
Could you tell me some other idea what happend?
Message error is just "Message no. KE350"
Abou claculate the cost:
It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
Could you tell us is there is some thing more to do?
Thanks,
Rosana.

Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

Logon not possible (error in license key)

dear sir
I had a temporary license which got expired yesterday. but i received the permanent license today
and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
an error at the bottom that " logon not possible (error in license key ) "
pl given a solution
thanks
john

Logon using SAP* in client 000.
Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

Error with SMS_DISTRIBUTION_MANAGER

Hi,
Error with SMS_DISTRIBUTION_MANAGER shows up while, distribute a package:
SMS_DISTRIBUTION_MANAGER
CONFIGMGRDTS
Possible cause: Distribution manager does not have access to either the package source directory or the distribution point
Company server is down, Need help asap
Thanks in advance.

Are you seeing this in component status? Has something been changed (specifically the ConfigMgr servers computer account permissions on the source share)? Check the distmgr.log file for additional information.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error with AE CC on Windows 8. "Crash in progress. Last logged message was 5172 GPU Manager 2 ." Graphics card is Inter HD4600

Hello, I just downloaded and Installed Adobe CC through the creative cloud. But cannot manage to open it.
I have Photoshop CS6 Installed (had it on the computer previously) and I signed in and have no problem.
Thank you
Filipe

I'm having the same problem except I get the error and crash right when the interface loads.
I've had CS4 since it was released and have never had a problem.
Specs:
Vista Ultimate 64 SP1
Dual monitors
NVIDIA Geforce9800 GTX
Intel Core2 Duo E4600 2.4GHz
8GB RAM
Latest Updates for CS4
Something interesting: Lastnight I updated my NVIDIA drivers to the latest 191.07 and everything worked great. But then this morning when I launched AE again, same error.
Things I've tried:
Shift+Ctrl+Alt + double click on AE icon
Uninstalled Quicktime
Reinstalled Quicktime
Reinstalled NVIDIA 191.07 drivers
Uninstalled Magic Bullet Mojo trial for Premiere
Removed the AE_OpenGL.AEX file from C:\Program Files (x86)\Adobe\Adobe After Effects CS4\Support Files\Plug-ins\Extensions
Deleted Workspace files from C:\Users\[USER]\AppData\Roaming\Adobe\After Effects\9.0
Created new Windows user
Cried for a little bit
Unpluged all USB devices: Wacom Tablet, USB mic, etc.
Killed as many running processes as possible
Played with settings in the NVIDIA control panel taliored to AE
So the only thing else I can think of right now is to install SP2. I can't do that right now but if anyone can verify that it'll for sure work, I'll try it.
Is the 9800 GTX on the list of GPUs for AE? Doesn't it fall under the 9 Series?
I'm open to all suggestions. Thanks!
Alex

SQL query alias names errors with dynamic lists

Hullo,
Problem:
- Made a query form book database. Have authors in separate table with unique ID's referring to them on book table.
- Query fetches author name in "Surname, Firstname initial.Secondfirstname initial" format, --> like "Bukowski, H.C" and giving that combo alias name in SQL like "AS 'author'"...
- Dynamic list works fine at start, but when ordered from detail table back to the mainlisting, it does make an error with SQL stating "unknown column 'author' in where clause"
That must be because the script looks for "author" column from the original table yeah, but how can I solve this? Any ideas? Does this mean that Alias names for columns are not possible or is there something i've missed?
Any ideas, suggestions?
Thanks,
KimmoK

Hi Kimmo,
ADDT´s dynamic lists can handle alias columns fine to my experience, but I reckon that you most probably applied the "CONCAT(...) AS author" query modification after having generated the list, and the list´s internal WHERE clause seems to have no clue of this alias column.
You can get an idea about using alias columns in Dynamic Lists in my tutorial "Dynamic Lists: exploring the Filter Conditions": http://www.guenter-schenk.com/tutorials/tutorial.php?id=6
Can you please post the list´s code on your server as text file (e.g. code.txt) and provide a link to this file ?
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Possible error with gyroscope

Similar Messages

Maybe you are looking for