Possible error with viewing same site on desktop and iPad
Site is viewing correctly on desktop but on iPad everything not pinned is being pushed to left with white space to the right of page.
There are no hidden or active elements off the page anywhere..
Here is an observation.
With Acrobat Reader 11.0.02 installed on OS X 10.8.2 and Windows 7 (with latest updates), the reported default page display resolution in Reader's preferences is 81 for OS X, and 96 for Windows. What this means in English is that PDF that are viewed on OS X appear noticeably smaller than when viewed at 96 ppi. Like looking backwards through binoculars.
What happens if you adjust the Reader custom display resolution to 96 ppi. Does this improve the visuals with Windows counterparts?
On IOS, and in particular, later models of iPad and iPhone, you are looking at PDF at default display resolutions upwards to 326 ppi. I would hope that the PDF look sharper on IOS 5/6 than they do on OS X. Try setting the custom display resolution in Adobe Reader on OS X to 326 ppi. Notice any sharper (albeit) huge resolution difference?
Are you requesting the “Best” setting for Pages PDF export, or “Better.” There is a 150 ppi resolution difference for text in those settings.
Similar Messages
-
I downloaded mountain lion on my laptop. Do I need to do the same on my Desktop and iPad or is the one download good for all 3, and how do I do that if it is?
If your desktop computer is one that supports Mountain Lion, you can either download it there or make a bootable jump drive with the installer on it -- assuming you haven't yet used the installer you downloaded to your laptop.
As for the iPad, it doesn't use the same OS as the Macs do; it uses iOS versions, so Mountain Lion won't work there. -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
-
I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?
Thank you.You may need to replace the Pram battery.
-
I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?
Suggest you try the password for the Macbook, not the previous one.
-
Updated document about QuickTime errors with After Effects (re: H.264 and hyperthreading)
I just updated "troubleshooting QuickTime errors with After Effects CS5, CS5.5, and CS6" with information about hyperthreading and Apple's H.264 encoder.
The gist is that Apple's H.264 exporter component for QuickTime fails when the computer has a large number of CPUs.No, this applies to any QuickTime H.264 export. You can export H.264 in a QuickTime .mov wrapper out of AME, too, and it will have this problem.
The various H.264 encoding presets (for YouTube, Blu-ray, Vimeo, iPad, etc.) don't use the H.264 QuickTime component, so this isn't relevant to them.
This problem is just relevant to choosing Apple's H.264 as the video codec when choosing QuickTime as a format. This applies to all software that uses QuickTime, by the way, not just Adobe software. -
i had a pop up on my screen saying i hadnt backed up in 4 weeks i hit ok and the pop up wont go away and now another with the same message has appeared and that wont go either, i cant unlock the ipad because of these and i dont think it's backing up properly either
HELP!!Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I own CS4 . It is registered with Adobe covering both my desktop and laptop. I have a brand new laptop . How do I put it on my new and remove it from my old ?
On the old laptop, under Help, choose deactivate.
Install on the new machine, and enter the serial number to activate. -
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?
Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time -
How do i delete music with grayed titles in my iphone and ipad. iTunes Match is on
how do i delete music with grayed titles in my iPhone and iPad. the grayed titles happened when i installed iTunes Match.
I've done the reset iTunes Match routine turning it on or off in my devices. Everytime its On, it goes thru d scan, match and upload process. When it gets to tge upload stage, it takes sooooo long for just one song to upload, as if d remaining song (2k+) will take years. Anyway, the grayed titles still don't go away. These titles are not exactly missing. I can play those titles because they also appear in my devices as regular content - meaning, the grayed titles are duplicates but don't go away.
By the way, these grayed titles are viewable only in iTunes Match not on my devices (iPhone 4 and ipad2) -
I have a hotmail account sync. With my Mail on the Macbook and iPad, everytime I open my mac all emails are transfered from the iPad to the Macbook. Is there a way to keep a copy of the emails on the iPad? Or access them after transfered?
AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad
-
Error with viewing out of Firewire (hard to explain in 1 line)
I am editing on an iMac with FCP 5.1. For capturing I have my DV camera running into one of the firewire ports and my external drive running into the other firewire port which I am capturing to. This works great
However while I am editing I view the screen on a TV plugged into the output of the camera so the video streams from FCP into the camera and out into the tv. However this is having issues with not displaying the video properly and just getting black bars in footage when trying to stream footage. It looks fine on the computer but its not streaming out to the camera properly. Now I realise that the iMac has only one firewire bus but I thought that if it captures fine streaming both signals at once then the reverse should also work. Any ideas?
G5 iMac 20inch, Macbook Mac OS X (10.4.7) FCS 5.1, 500GB External#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane -
Published site aligning differently on desktop and iPad
Hello,
Hoping someone can help, have spent the last 4 hours trying everything and cannot find the solution.
Have exported as HTML and uploaded to FTP. The design views perfectly and centrally in browser on my Desktop (top), but on my iPad and Android tablet the pinned header appears central but the rest of the site is aligned to the left. Site and individual page properties show padding to top and bottom but all are aligned as 'centre horizontally'.
I have tried unpinning the header, adding padding to the left, rebuilding the layers..
Any help would be amazing..Hey again Zak...
So I'm pretty sure that there is nothing hidden and nothing unlocked off screen that would be causing this issue..
If you have the time or inclination to further help, I've uploaded part of the site http://czav.co.uk/BritishTapas/MuseExport/ - if possible you would be able to see the difference on a portable device and desktop/laptop..
I think it has something to do with the header at the top, being pinned perhaps as when I pin elements on the page the force central.. It doesn't make sense at all as it appears completely fine on my desktop and not on my iPad..
If you are able to help anymore, thank you, I appreciate if you are busy..
Have attached a screen of the master page showing all elements
Best regards
Christian -
Using same project for Desktop and Web (?)
Is it possible to manage a same codebase/project for compiling both for AIR and web release (?) Also, on a distant thinking, can ANT able to help on this way?
To elaborate further, in Flash Builder create:
Core Library : Actionscript Library Project - This project contains 90% of your code as CWBenccw mentioned.
AIR Core Library : ActionScript Library Project (Linking AIR libraries) - This project contains AIR-specific implementations of core functionality.
Web App: ActionScript Project (Web) - This project links with Core Library and contains a basic entry point for web (a Main Sprite)
Desktop App: ActionScript Project (Desktop) - This project works like the above, but with a Desktop entry point and Application descriptor, and links with AIR Core Library
Mobile App: ActionScript Mobile Project - Same as above, but for mobile
The way you use your AIR Core Library is to provide overrides for things that are different in AIR. For instance you might want to be able to save files differently, but transparaently to the Core Library. In this case you create an interface for saving in Core Library, e.g.
interface Saver
function save(filename:String, data:String) : void;
You also create an implementation for your non-AIR core:
class FlashSaver implements Saver
function save(filename:String, data:String) : void
var so : SharedObject = SharedObject.getLocal("something");
so.data[filename] = data;
so.flush();
And then an AIR implementation that might use AIR features like direct File IO.
Your various entry points are responsible for providing the correct implementation of Saver to your Core Libraries via some form of dependency injection.
Maybe you are looking for
-
I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try i
-
Files with a size over 100mb keeps failing on the download
When I want to download a file which size is over say 100mb i get the message after the download percentage hit 100 that "<filename> could not be saved, because the source file could not be read" it was ok previously, could be the upgrade or a plugin
-
Windows support software could not be saved to the selected folder?
Hi all I am trying to install windows 7 using bootcamp on my I5 Mac mini but every time bootcamp moves on to downloading the windows support files i get the error "Windows support software could not be saved to the selcted folder" my usb drive is an
-
Territory management in CRM 7.0
Hi, I created a territory and assigned rules and employees for it. And in Display relationships views I can find the business partners account which I need. But when I try to created I opportunity and entered the prospect, The territory Id showes "BT
-
Can anyone clarify me about the api Object[] toArray(Object[])
There are two apis in Collections framework to convert the Collection elements into an array 1. Object[] toArray() 2. Object[] toArray(Object[]) Can some one explain me what does the second api - Object[] toArray(Object[]) does ?