Possible explanation for L920 issues

Hello,
I will be sending an official Email to Nokia about my experience with the L920 and my observation but would like to share with you what my device is struggling with. I will have to confirm that my device, including the battery is fault free.
** GPS
Somtimes the GPS will not lock. It will work for minutes, hours but out of the blue just refuses to respond anymore.
I can confirm this issue after several tests. It's obviously software related.
Tried it with many GPS softwares; sometimes GPSinfo can't use the GPS, instead it displays using A-GPS ( Assisted GPS ) from GSM data. Accuracy is somehow 100-200 meters that's why you will see your position jumping all around the map.
The only solution is to reset the device. Once done, if you open GPSinfo for example, it will connect to the sattelite and lock in seconds. If you retry after half an hour, it still locks. If you use the device for hours moderately and try again, it fails. Hence I have to reboot it.
If it's a hardware issue, GPS will lock sporadically regardless of reboots which is not the case.
** Speakers
Another thing I noticed... When you play a notification, if you put your ears next to the speakers in the button when it's over, there will be a light buzzing sound barely noticeable ( if you are in a quiet room ) for 2-3 seconds and then will go away. It basically means that the speakers were on and went into standby. Another explanation to why sometimes when I get a notification I hear a crackling distored sound then it continues normally. Should be because the audio device is waking up.
I have repeated the scenario for 15 minutes playing notifications on and off and stimulating the speakers; I observed a fast battery drain along with overheat ( Battery Sense displayed -41% / hour with brightness medium ) and my battery went from 72% to 58% which is odd. I've always had mediocre battery performance with moderate usage and excellent standby time so my battery is not defective nor my device is.
Also if you play an MP3 whatsoever and you keep pressing Vol Up or Vol Down, the sound will distort until you stop pressing.
It could be a reason why sometimes battery drains way faster than it should as I sometimes receive 90-100 notifications per hour ( Mail exchange + whatsapp + facebook chat etc.. )
**Brightness
You don't want to count on your AutoBrightness settings in WP8 do you ? Usually in a sunny day, if you go outside, your phone should increase the brightness and reduce it back when you go indoor.
With WP8 it's not the case. It's only working one way. When you are already indoor and go out while using your phone, it will indeed increase the brightness. However, If you are in using your phone with full brightness and move to a dark place, it will not reduce the brightness unless you lock the screen and unlock it.
Now what happens here is a disaster to the battery in my opinion. If you are moving around at night and your proximity sensor gets exposed directly to a light from a random source ( lamp above you whatsoever ) it will increase the brightness while you're using your phone but wont decrease it back once you move.
You will probably not notice that the screen brightness has increased if the background is black but it will drain your battery much faster.
Remember, although it might look like Autobrightness is ON but in reality the system will consider what has been set in the manual settings to adjust the brightness accordingly. That being said, those values probably will be the threshold. If set to medium, in a sunny day outside, WP8 will increase the brightness to medium as a maximum or so.
** Battery
Now this one is quite strange but it looks like WP8 battery meter isn't accurate at all. I did many recharging-discharing cycles from 2% to 100% leaving it for hours on power but it looks like WP8 doesn't give you accurate numbers. After unplugging the device from full charge, I left the screen on for 10 minutes to lock : the percentage remaining was still at 100%.then started decreasing slowing to 96% after 30 minutes. I left my phone idle on standby for another 30 minutes and found the battery still at 95%. Played with the device for around 10 minutes and it dropped to 87% ( browsing app store no intensive tasks involved )
Now the suprising thing is that when I hit 17% after hours, I had to reboot the device to find that the battery remaining jumped back to 39%. This is quite odd.
One possible explanation in my opinion is that WP8 uses an algorithm to estimate the percentage of battery remaining based on your usage history ( could be last 30 minutes or hour ) and displays the remaining percentage which doesn't look accurate if anything. A potential reason to why some people excluding those with overheat issue, are reporting mixed battery life observation. One day the battery seem to drain faster than the other one.
Note that this is my own observation based on several experiments and tests of two Lumia 920 devices.
Specifications
Phone:           Nokia Lumia RM-821
OS Version:   8.0.9903.10
Firmware:      1232.2109.1242.1003
Radio:            1.0.202041.3
Background Apps:
Battery Sense
extra+info
Facebook
LinkedIn
Metrotube
Nokia Drive+ Beta ( Blocked)
Whatsapp
Battery Performance with Wifi and 3G enabled
Maximum standby time                               3 days 9 hours
Heavy Usage with high brightness              7 hours 18 minutes
Moderate usage with medium brightness   19 hours 14 minutes
Source : Battery sense.
I will keep playing with the device and update you with my findings. My aim is to bring myself and all Lumia x20 users the best experience out of an outstading piece of hardware.

Here's how this forum works:
Original poster reports a battery/stability/heating/GPS issue
Someone suggests to do a soft reset
Original poster reports having done that, it helped for a while, and now the issues are back
Now someone suggests the OP to take backups of their data on the phone and do a hard reset.
OP does this and spends a long time setting the phone back up to their liking only to find that the issues are still there
OP is told to contact Nokia Care and hope for best
Has anyone had their issues permanently fixed by doing a soft or a hard reset?
I'm doing a hard reset on my Lumia 920 as we speak so I can take it to Nokia Care and so far it has had the turning cogs going for 13 hours. I'm afraid of interrupting the process, but surely it's not supposed to take this long.

Similar Messages

Possible cure for battery issues

hi
first of all i dont own the device yet
i am user of 5530,5800,n8,c7,701
i was looking farword to bring in my hands the first nokia wp7 but due to features missing and (in my opinion) little overpriced at the moment(as sim free) i will wait for the next nokia wp7
but being for a while in nokia forums i deside to write this atricle with my opinion about the battery issue (IF IT IS) with the 800
after reading many users facing problem with battery in different revious and forums about my N9 last longer or my N8 etc i deside to do a test with my current in use 701(1300milliamber battery and the brightness screen that nokia offers right now)
i left all day the phone connected to 3g and gprs data with about 5 min calls couple of textsand little browsing fmobi,little use the default browser,little use apps which connects to internet ...all these for about 1,5 - 2 hrs
it did last about 12 hrs same as some users with the lumia
Now if you dont belive me TRY THE SAME TEST BY YOUR SELFS
what i have understand (as i dont own the device) is that perhaps by default or out of the box (and especially the branded phones from the providers) is that featurs like wifi or data, nokia account, market place bing etc must be ON
if was the same issue with my 701 it will not go too far of course
what nokia possible can do is to do a frimware update which in start up or rebooting the phone....dark them,wifi,data,bluetooth,internet connection should be off by default like in symbian
i am sure the upcoming new customers will not have future complains
but i belive this is important as some poeple dont have the knowlege to do all these to turn off manual, especially in a new UI that they are using first time (wp7) and of course having a new phone most of them especially the non experts can think the battery drains so easy if all are ON
******* or at least nokia should make it like symbian to turn off automatic after closing apps,face,twitter,email etc
thanks for your time reading
for me after my Xmas bonus(if any lol) i will go for a windows phone(sim unlocked)either if nokia or other brand
of course i can wait for the next nokia model not because of the battery issue but i prefer in windows phone 7 bigger screen
thanks again

I must agree with your thinking...
When I first got my C7, battery wasn't lasting a day...
And the reasons was the ones you said...
e-mail was keeping data on, WiFi was always looking for a connexion
I won't say that the Lumia 800 can't have any battery issues, but first of all, it's our use that kill off the bettery...
Setting e-mil to work only once per hour, setting WiFi off when not used...
Only those 2 option give a bette life to the battery...

Possible methods for Goods issue in a production orderfrom shopfloor stock

Dear experts,
pls tell me about the possble ways to goods issue against a prodcution order ,from shopfloor stock ,except backflushing ,alongwith TCODES & Mvt types used in this process..
Thanks

In MIGO select Goods issue, Order and enter the Production order no, system will display the all the components material in Production order with 261 movement type and post the document
or
In MIGO select Reservation, enter reservation NO(You can see in production order assignment tab) system will display the all the components material in Production order with 261 movement type and post the document
or
In MB1A,after entering Movement type 261, plant storage location Click to order enter the production order No, system will display the all the components material in Production order ( this will come under planned consumption i.e, rervation qty will be reduced).
For unplanned
In MB1A, enter the Movement type 261, plant storage loc and enter, In the second screen enter the production order NO, here you need to enter component manually with qty and save, this will comes under unplanned consumption

When i paste some copied color text or formatted cells from excel to my mail draft while composing a mail, it is being pasted as plain text. No back groud or text colors are copied to it. Please suggest a possible solution for this issue.

Colors & Formatted Cells from Excel application can not be copied to my mail composer as it is. Only Plain text is copied.

Wish I could be king. But you described the problem perfectly and I am still but a pawn. All I can say is that I trashed the mail preferences (com.apple.mail.plist) on my Mac Mini, and now my MacBook seems to work right.
Sorry. :>) But that is the truth... The MacBook now has actually sometimes displayed pasted text in its actual, different, font and style as I paste it into a partially composed new mail message.
In other (more rational) words, the problem seems to be tied to pasting only certain types of text. I have not been able yet to pinpoint what. Yes, frustrating indeed. The only work-around has been to re-train my fingers to command-option-shift V, for "paste and match style" (like you, I do not want to always use only plain text). Maybe someone else will eventually weigh in with a real solution. The solution I want is just to be able to consistently see any font variations within my message before I send the email.
The info about the different ppi scales between Windows and Mac is interesting, although not relevant to this particular problem. It does explain the apparent overall size differences I have seen before.

Need explanation for apparent heap size reduction

Hello,
From the GC logs, it appears that the heap size is being reduced across young and old generations after sometime. Is there any explanation to this?
Below are three entries from the logs.
{Heap before gc invocations=5:
PSYoungGen      total 44800K, used 44180K [0x18220000, 0x1b420000, 0x24a20000)
eden space 38400K, 100% used [0x18220000,0x1a7a0000,0x1a7a0000)
from space 6400K, 90% used [0x1ade0000,0x1b3853c8,0x1b420000)
to   space 6400K, 0% used [0x1a7a0000,0x1a7a0000,0x1ade0000)
PSOldGen        total 51200K, used 16K [0x0ba20000, 0x0ec20000, 0x18220000)
object space 51200K, 0% used [0x0ba20000,0x0ba24128,0x0ec20000)
PSPermGen       total 32768K, used 12417K [0x03a20000, 0x05a20000, 0x0ba20000)
object space 32768K, 37% used [0x03a20000,0x046406c0,0x05a20000)
1047.599: [GC [PSYoungGen: 44180K->5990K(44032K)] 44197K->6006K(95232K), 0.0046671 secs]
Heap after gc invocations=5:
PSYoungGen      total 44032K, used 5990K [0x18220000, 0x1b5a0000, 0x24a20000)
eden space 37632K, 0% used [0x18220000,0x18220000,0x1a6e0000)
from space 6400K, 93% used [0x1a7a0000,0x1ad79990,0x1ade0000)
to   space 7552K, 0% used [0x1ae40000,0x1ae40000,0x1b5a0000)
PSOldGen        total 51200K, used 16K [0x0ba20000, 0x0ec20000, 0x18220000)
object space 51200K, 0% used [0x0ba20000,0x0ba24128,0x0ec20000)
PSPermGen       total 32768K, used 12417K [0x03a20000, 0x05a20000, 0x0ba20000)
object space 32768K, 37% used [0x03a20000,0x046406c0,0x05a20000)
{Heap before gc invocations=174:
PSYoungGen      total 9728K, used 9666K [0x18220000, 0x18d30000, 0x24a20000)
eden space 8640K, 99% used [0x18220000,0x18a8fa58,0x18a90000)
from space 1088K, 94% used [0x18a90000,0x18b910f0,0x18ba0000)
to   space 1344K, 0% used [0x18be0000,0x18be0000,0x18d30000)
PSOldGen        total 51200K, used 21113K [0x0ba20000, 0x0ec20000, 0x18220000)
object space 51200K, 41% used [0x0ba20000,0x0cebe540,0x0ec20000)
PSPermGen       total 32768K, used 12611K [0x03a20000, 0x05a20000, 0x0ba20000)
object space 32768K, 38% used [0x03a20000,0x04670fa0,0x05a20000)
26968.748: [GC [PSYoungGen: 9666K->1271K(9920K)] 30780K->22465K(61120K), 0.0025274 secs]
Heap after gc invocations=174:
PSYoungGen      total 9920K, used 1271K [0x18220000, 0x18d50000, 0x24a20000)
eden space 8576K, 0% used [0x18220000,0x18220000,0x18a80000)
from space 1344K, 94% used [0x18be0000,0x18d1dd00,0x18d30000)
to   space 1408K, 0% used [0x18a80000,0x18a80000,0x18be0000)
PSOldGen        total 51200K, used 21194K [0x0ba20000, 0x0ec20000, 0x18220000)
object space 51200K, 41% used [0x0ba20000,0x0ced29e0,0x0ec20000)
PSPermGen       total 32768K, used 12611K [0x03a20000, 0x05a20000, 0x0ba20000)
object space 32768K, 38% used [0x03a20000,0x04670fa0,0x05a20000)
{Heap before gc invocations=23195:
PSYoungGen      total 1536K, used 1372K [0x18220000, 0x18440000, 0x24a20000)
eden space 896K, 100% used [0x18220000,0x18300000,0x18300000)
from space 640K, 74% used [0x183a0000,0x184173e8,0x18440000)
to   space 640K, 0% used [0x18300000,0x18300000,0x183a0000)
PSOldGen        total 6272K, used 4627K [0x0ba20000, 0x0c040000, 0x18220000)
object space 6272K, 73% used [0x0ba20000,0x0bea4d70,0x0c040000)
PSPermGen       total 32768K, used 12930K [0x03a20000, 0x05a20000, 0x0ba20000)
object space 32768K, 39% used [0x03a20000,0x046c0aa0,0x05a20000)
71908.146: [GC [PSYoungGen: 1372K->533K(1536K)] 6000K->5423K(7808K), 0.0107964 secs]
Heap after gc invocations=23195:
PSYoungGen      total 1536K, used 533K [0x18220000, 0x18460000, 0x24a20000)
eden space 896K, 0% used [0x18220000,0x18220000,0x18300000)
from space 640K, 83% used [0x18300000,0x18385438,0x183a0000)
to   space 704K, 0% used [0x183b0000,0x183b0000,0x18460000)
PSOldGen        total 6272K, used 4890K [0x0ba20000, 0x0c040000, 0x18220000)
object space 6272K, 77% used [0x0ba20000,0x0bee6868,0x0c040000)
PSPermGen       total 32768K, used 12930K [0x03a20000, 0x05a20000, 0x0ba20000)
object space 32768K, 39% used [0x03a20000,0x046c0aa0,0x05a20000)
The (relevant) JVM parameters used are as follows :
-server
-Xms600m
-Xss256k
-XX:+UseParallelGC
-XX:+PrintHeapAtGC
-XX:+HeapDumpOnOutOfMemoryError
-Xloggc:verbose_gc.log
-Djavax.net.debug=none
-XX:+PrintGCDetails
-XX:+PrintTenuringDistribution
-XX:+PrintClassHistogram
-Xmx800m
-XX:NewRatio=1
-XX:CompileThreshold=1500
-XX:PermSize=32m
-XX:MaxPermSize=128m
Any help would be welcome.
-R

From what has been looked into further - it appears to be an issue with the threads.
The issue is reproducible if threads are simply created and allowed to run for some time and then complete.
The issue is reproducible on JDK 1.5.14 but not with JDK 1.6.37.
The use of thread pools likely masked the issue leading to the above mentioned gc sample.
Update #1:
A plausible solution for 1.5 as determined is to include '-XX:NewSize' in the parameters (the eden does not reduce below that) however it is not known if this will resolve the issue (memory reclaimed but not accounted for) or if there will be out of memory issues (memory not reclaimed)
Additional links:
https://bugs.openjdk.java.net/browse/JDK-7118202 (Relates to JDK-7 : for possible explanations so as to what can cause it)
https://www.java.net//node/662483

Different GOGS GL account for goods issue

Hello SAP export,
The F&A department requests to generate different COGS GL account based on Customer Account Assignment Group when goods issue (or billing). Customer Account Assignment Group field name is KNVV-KTGRD. The solution is NOT possible at T-CODE OBYC (with GBB transaction (MM FI configuration for goods issue) because we are using the same materials. (All materials are with same valuation class in MATERIAL master).
I had posted this question in SD forums but the export suggests me to post in FI forum.
If you know any workable solution, please help.
Great thanks in the advance!

Hi,
Check the link for how to have default a G/L account on a Purchase Order account assignment for an inventory item & how to post to a separate G/L account for inventory item by having GR posting
http://www.bluemarlinsys.com/ns/0603-03.asp
OR
you can have a thought of having different valuation grouping codes where you can have different G/L posting with respect to plant for same materiel
valuation grouping code........valuation area
0001......................................P001(plant-1)
0002----
P002(plant-2)
Regards,
Biju K

NO Document for Goods Issue -Kindly help me in solving the issue

Hi,
I am getting the below error while doing post goods issue.and not generated acccounting document.kindly advice me.
Material document 4900001022 does not include an accounting document
Message no. M7082
Diagnosis
The system cannot find an accounting document for the material document 4900001022.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B.
Thanks
Sunitha

Dear Sunita,
Please check
T. Code: OMS2
Select your material type (from right hand side), and click: Quantity/ Value updating (frpm left hand side).
Check whether the Box: value updated is checked or not. If this is not checked the material is not valuated.
Also, check whether a relevant accounting document( In general, WL) is assigned the material document or not.
Best Regards,
Amit.
Note: The best way is to cosult your MM-Consultant.

Line item does not exists for Good issue

Dear All,
User have created a outbound delivery and perform Post good issue.No billing document has been created yet. Somehow lineitem does not exists in the delivery document however Material Document for Good issue exists with reference to Delivery Document. I tried to reverse the delivery document with reference . No error was occured but still no reversal was updated on Delivery document. I know it is not possible to delete line item without reversal of PGI but system is showing me the status as described
Prompt response in this regard is highly appreciable
Thank you,
Nomi

Solution has been identified, If goods has been issued then Returns Process wrt Sales Order solved the problem for my rare process. Goods have been transfered to unristricted stock.
Thank you all for your support
Best Regards,
NoMi

I received a text from a friend that she didn't send. Is there an explanation for this?

So I was texting my friend, we both have iPhones and are both using iMessage to text each other. We got into a rather personal conversation (not that important). But in the middle of the conversation I received a text message (SMS) instead of an iMessage which we'd both been using, but then immediately back to iMessage, so I thought nothing of it. Then later it happened again, I got another text message in the middle of our iMessage conversation, and then back to iMessage. Although this time it was a strange question to which I inquired about and my friend was confused as to what I was talking about. I screenshotted the text message I received in the middle of OUR iMessage conversation and sent it to her. She said "I never sent that" and was adamant about it. I believe her, although I am not by any means ruling out that she lied to me. All the text messages came from the same number that I've always texted from previous phones and iMessage'd since we've had out iPhones. What makes me both scared (and suspicious of my friend in a way) is that in the text messages I got, they referenced the very personal conversation that her and I were having through iMessage. She swears by god that she neither told anybody about our conversation, nor let anybody see her phone. Is there a legitimate explanation for what has occurred? It has made me very paranoid as to the fact that either she lied to me, or perhaps to the even more frightening fact that our conversation is being watched and apparently intervened into by an unknown stranger, by which an explanation may help. However unlikely that is, I will not rule it out. Technology has come far and can do many things. Any insight/feedback as to a possible explanation or anything to ease my stress and paranoia would be greatly appreciated. Keep in mind, the messages I got that are in question are from her phone number, not her iMessage/apple ID address/email address. She swears she did not send then, which I trust, but they came from her phone number.
<Email Edited by Host>

Gave me a URL on Apple.ie...
What was that URL? Don't post the whole thing; just the part between the double // and the first single / or ? character. For example, if it was
http://something.apple.ie.something/blahblah
or
http://something.apple.ie.something?blah=blahblah
then just post
something.apple.ie.something

Possibility of reversing Goods issue and delivery of one line item

Hi experts,
Is there a possibility of reversing Goods issue for only one line item and also the delviery for that line item so that i can make changes in the sales order for that line item only.
Appreciate your response.
Regards,
krishna

Hi Laxmipathi & Rithvika,
Basically the issue is in the sales order there are around 90 line items out of which most of them has been processed the delivery and GI and even invoices has been made for some.
While doing so, there are about 5-6 delivery docs has been created for the 90 line items.
Now, we need to change some data for few line items , for this we dont want to do reversal for all the line items and again do a delivery and PGI as these line items are in various delivery docs.
Let me know , if there is anyother way of doing it or we should follow the normal process of doing it all again.
Regards,
krishna

Setup of approval for Miscellaneous issue transaction in Inventory

Dear Experts,
We have a requirement from client to setup approval for Miscellaneous issue/
receipt transaction in Inventory.
Is it possible to fulfill the above requirement using Approval Management Engine (AME)?.
If it is possible, Kindly explain me in detail about the setup steps needed for the
configuration of Miscellaneous issue/receipt transaction in Inventory.
Kindly respond at the earliest as the requirement is needed urgently for our client.
Thanks in advance !
Best Regards,
Naveen.

D
Dear Lavanya,
The material should be first reeived to Inventort then transferred to projects
Ex 100 Quantity is Received @ 10 Each - Inventory Material value will be 1000 Unit Price 10
Now 10 Quantity is Issued(Samples) @ 0 each - Inventory material Value will be 1000 Unit Price 11.11
Now Transfer the remaining quantity to Projects i,e 90 quantity, & inventory material value will be 1000, unit price will be 11.11 (Use Project related Misc Transaction for Project Issues)
Even though material is issued with 0 unit price A/c entries will be generated
Dr. Given A/c
Cr. Inventory material value A/c
Here first the material is directly received into Inventory (Not related to projects organization) Miscellaneous Issue (For samples) is done with 0 unit cost after that The material is transferred to projects (Project Issues)
For Miscellaneous Issue (Samples Issue) a Personalization is need to done such that the Unit price will be freeze to 0.
Regards
Shaan

ESS- Leave : You are not one of the possible agent for the task ws9021212?

Hi ,
I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
i have cleared the buffer also!
BUT STILL I AM GETTING THE ERROR ?
Please help me !
Richard A

hi Richard
Try to do this way. IN the workflow builder there is a button with hat. that is basic data. click on that and it will go to another screen and u can find a apple button that is agent assignment for a task click that.
It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
If helpful kindly reward points
Regards
vijay

Possible fix for OS X 10.5.7, losing connection after sleep, restart

Possible fix for OS X 10.5.7, Airport, losing connection after sleep, restart, or cold reboot.
Issue: (For OS X 10.5.7 on iMac5,1, Intel Core 2 Duo)
=============================================
- After sleep, restart, cold reboot, even though cannot connect to Internet, but the AirPort bars are still full, as if connected.
- Losing Internet connection after sleep, restart, cold reboot.
Possible Fix:
1.Open Network Preference, click on the Location drop down list > Edit Location... > click on the wheel button > Duplicate Location.
a)Select this newly setup location; Use Diagnostic button to connect to the internet. Select Network or enter WEP password if necessary.
b)Test to make sure you can connect to a web page.
c)Go to sleep & wake up.
d)This time, the Airport bar will start to show correctly. Before, it will always be full even when not connected. Now there will be no bars or grey out when not connected.
2.On the left hand side of the Network Preference Window, there is a list of services, such as Airport, build-in ethernet, built-in FireWire, bluetooth, etc.
a)Click on the wheel button on the bottom of the service list; select Set Service Order...; move Airport to the top of the list.
b)Delete any services which you are sure that you are not going to use, such as Bluetooth, etc.
3.Pick one of the locations mentioned in #1, and make it sure it is connected. If not, use Diagnostic button. If you have to select Network or enter WEP password to connect, make it so.
a)Check to make sure you can connect to a web page.
4.Go to sleep & wake up. The Airport bar should be filled up quickly. Try to connect to a web page.
5.Restart computer. Test a web page.
6.Shut down & Start computer. Test a web page.
7.When everything is working fine, you can delete the extra location that you created in step #1.
8.Click the lock on the left lower corner of the Network Preference window to safeguard the setting.

If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
(Removed link because of the way Flash drives the Canon site).
It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
Chris
I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
Message was edited by: 2point5

Does apple have any explanations for why iCloud will not support iWeb & is there any viable solutions. iWeb is critical to my small business & we have all been trained via joint ventue on iWeb. Now it just goes away. Why?

Does apple have any explanations for why iCloud will not support iWeb & is there any viable solutions. iWeb is critical to my small business & we have all been trained via joint ventue on iWeb. Now it just goes away. Why?

turbodave2 wrote:
I appreciate your repsonse, but the irony is that Apple is still scheduling "One-to-One" & Joint Venture training on iWeb knowing that it all will end next June. ..
Just to add this : iWeb -- the app itself -- is still supported,updated only months ago and as part of the ilife '11 DVDs still widely spread even though it is not sold on the AppStore it is official part of iLife. It runs in Lion and there is zero issues with the app. So a training makes sense, doesn't it ?.
They would only to exclude the "publish to me.com" part to be up to date for courses and trainings :-≠

Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite ph

Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
& IMEI is : *****
Br-----------------------
Fazlur
<Personal Information Edited By Host>

It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

Possible explanation for L920 issues

Similar Messages

Maybe you are looking for