Possible Fix Failed Burn Error Codes 4000-4850
Under preferences change the burn speed, you might have to try each speed to get one compatible with your computer. I own a Sony Vaio and a Gateway notebook and it seems 20x works for both.
This kinda worked on my computer. I've got a Gateway Tablet PC and I had to knock the speed down to 12x before I could get the burner to work. 16x might work too, but I didn't try it. I'd already wasted tons of disks....
Gateway Tablet PC Windows XP Model CX2619
Similar Messages
-
HT203164 how do you fix burn itunes burn error code 4000?
How do you fix the error code 4000 when burning?
I ran the diagnostic, but I cant figure out how to paste it from clipboard. HELP
-
Hello,
I am having trouble burning my songs that I downloaded from ITunes. Have burned them once before and all went well but when I try to burn now all seems to go well and I can play the songs on my PC but at the end of the song I get a lot of odd noises and static. Very loud. I ran the diagnostics and this was the result:
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), UBHelper
UpperFilters: GEARAspiWDM (2.0.6.1), Cdralw2k (8.0.0.212), NTIDrvr (1.0.0.6),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
SiS 661FX
Connected Device Information:
Disk drive, HDS722512VLAT20, Bus Type ATA, Bus Address [0,0]
Disk drive, Kodak CF/SD/MMC/SM USB Device, Bus Type USB
Disk drive, Kodak CF/SD/MMC/SM USB Device, Bus Type USB
Disk drive, Kodak CF/SD/MMC/SM USB Device, Bus Type USB
CD-ROM Drive, AOPEN DUW1616/ARR, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: AOPEN DUW1616/ARR, Rev 1030
Audio CD in drive.
Found 1 songs on CD, playing time 02:23 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 48.
The drive CDRW speeds are: 48.
The drive DVDR speeds are: 48.
The drive DVDRW speeds are: 48.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: AOPEN DUW1616/ARR on CDR media at speed 8X.
If anyone can help solve this problem it would be greatly appreciated. I have removed all item from running while I burn and it seems to make no difference. I am using Memorex media (CD-R) which is the same media I used with success the last time I burned with ITunes.
I am running ITunes on a PC with Windows 2000 Pro. Service pack 4.
Thanks in advance for any help you can offer.Please tell us what burner you have. Look in System
Profiler > Hardware > Disc Burning.
You're using the Finder to burn?
A Google search on this error code turns up a lot of
topics. Some point to the media as the culprit,
others point to Tiger, some to the drive itself.
Fuji isn't a bad brand of media, but it's not
amongst the best, either.
Generally, an older burner can use 16X media, but
would obviously only be able to burn at the maximum
speed of the drive. It's possible that your drive
doesn't recognize the media code on the disc and
refuses to burn. Sometimes a firmware update to the
drive can solve this problem.
Here's the info under System Profiler>Hardware>Disc Burning:
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 8192 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I'm trying to burn data onto a DVD disc as backup. How do I burn using Finder?
Also, Power Mac G5 Uniprocessor Firmware update 5.1.5f2 does show when I click on Apple>software updates. However, it does not have a check mark. Would this apply to my computer even though it does not have a check mark? -
How can i fix a 4280 error code when trying to burn cd's on itunes
How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C
Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx. -
SSPI handshake failed with error code 0x8009030c and Login failed for user''
I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
i cant finish burning a cd. it gets almost to the end, then it cancels the burn and error 4000 pops up. here are my diagnostics. i have no idea what it means, but hopefully it'll help.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 8100
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
Connected Device Information:
DiskDrive, IOMEGA ZIP 250, Bus Type ATA, Bus Address [1,0]
DiskDrive, WDC WD200BB-75CLB0, Bus Type ATA, Bus Address [0,0]
CDROM, SAMSUNG DVD-ROM SD-616, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DRU-830A USB Device, Bus Type USB
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
E: SAMSUNG DVD-ROM SD-616, Rev bp06
Drive is empty.
F: SONY DVD RW DRU-830A, Rev SS25
Audio CD in drive.
Found 11 songs on CD, playing time 39:42 on Audio CD.
Track 1, start time 00:06:71
Track 2, start time 03:56:14
Track 3, start time 07:03:48
Track 4, start time 11:12:09
Track 5, start time 14:45:32
Track 6, start time 18:42:20
Track 7, start time 22:06:48
Track 8, start time 25:06:44
Track 9, start time 28:14:42
Track 10, start time 31:16:12
Track 11, start time 34:56:08
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: SONY DVD RW DRU-830A on CDR media at speed 40X.
dell dimension 8100 Windows XP
dell dimension 8100 Windows XPNo you misunderstood. In the iTunes burning preferences you can pick several choices such as an Audio CD, an MP3 CD, or a data disk. Which one are you burning?
As I said, if you are burning to an Audio CD (a plain old audio CD that can be played on any audio CD player), lower the burn speed to x8 or lower and try again.
Patrick -
What causes error code: U44M1P7? I have rebooted my machine multiple times and continue to get the same results.
Photoshop: Basic Troubleshooting steps to fix most issues
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html -
Hello, I need some help. I am getting the following error just when updating my Photoshop CS6 app. U44M1P7
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#TroubleshootUpda…
Re-install on top of CS6 had to do that myself when I had perpetual CS6 installed and tried to update to Subscription version. Perpetual CS 6 13.0.1.3 Windows 13.0.6 Mac are different then 13.1.2 subscription version
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html -
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue... the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
I notice some live tiles are active I prefer mine off so I shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
I wonder how many others have had this same issue and don't even know its happening....
1.
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
2.
taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
3.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
4.
Driver detected an internal error in its data structures for
5.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: e14
Start Time: 01cf3eb70280ca6e
Termination Time: 4294967295
Application Path: C:\WINDOWS\syswow64\wwahost.exe
Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
Faulting package-relative application ID: App
6.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 15bc
Start Time: 01cf3eb66f89a193
Termination Time: 15
Application Path: C:\WINDOWS\system32\wwahost.exe
Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.WindowsLive.MailI have the something similar happening as reported in event viewer in the warning section:
System
- Provider
[ Name] Microsoft-Windows-Security-SPP
[ Guid] {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
[ EventSourceName] Software Protection Platform Service
- EventID 1058
[ Qualifiers] 32768
Version 0
Level 3
Task 0
Opcode 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-08-13T04:35:49.000000000Z
EventRecordID 80761
Correlation
- Execution
[ ProcessID] 0
[ ThreadID] 0
Channel Application
Computer Monzworks
Security
- EventData
0xC004F059
installation of the proof of purchase from the acpi table failed 0xc004f059
My System Properties page says "Windows is activated" and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.
Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
Before this I had used apps.diagcab and it said my IE 11's temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
location: . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
engine could not be completed. I had to use a system restore. I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
- System
- Provider
[ Name] Microsoft-Windows-Security-Auditing
[ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
EventID 5061
Version 0
Level 0
Task 12290
Opcode 0
Keywords 0x8010000000000000
- TimeCreated
[ SystemTime] 2014-08-13T03:48:26.671362500Z
EventRecordID 290021
Correlation
- Execution
[ ProcessID] 676
[ ThreadID] 728
Channel Security
Computer Monzworks
Security
- EventData
SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
SubjectUserName Monz Prez
SubjectDomainName MONZWORKS
SubjectLogonId 0x239d9
ProviderName Microsoft Software Key Storage Provider
AlgorithmName UNKNOWN
KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
KeyType %%2500
Operation %%2480
ReturnCode 0x80090016
I am tired so talk among yourselves.
Sincerely Tired -
Mobile Application Development Installation failed. Error Code: U44M1P7
After install of DW CS5.5, I tried to update DW CS5.5 and received the following error message, does anyone know how to fix this?
Mobile Application Development
Installation failed. Error Code: U44M1P7Hi Stillcrazy,
Welcome to Adobe forums.
See the solutions in this article http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html and let us know if you still need help.
Thanks,
Preran -
CC app manager update failed with error code 50 after reaching about 35%
Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?
Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time. -
Itunes unknown error code 4000
Please help! I burned a CD just fine last week, and now when I try to burn, I am getting an unknown error code 4000. I googled the problem, and I have tried just about everything. The "include CD box is NOT checked," and I went into add/remove programs and performed the repair option. I also checked to make sure my drive is operating. Nothing seems to work. Any suggestions? thanks!!
how do we clear this please
-
Calendaring agent failed with error code 0x8000ffff Event id 8206 and 8207
Hi to all
We have an Exchange 2007 SP3 with Update Rollup 11 and all the user use Outlook 2003 with SP3.
Suddenly in our Exchange Server we have start to receive a lot of 8206 and 8207 EXCDO errors in the Application.
Event Type: Error
Event Source: EXCDO
Event Category: General
Event ID: 8206
Date: 5/2/2015
Time: 11:17:41 πμ
User: N/A
Computer: EXCHANGESRV1
Description:
Calendaring agent failed with error code 0x8000ffff while saving appointment.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 48 72 53 61 76 69 6e 67 HrSaving
0008: 41 70 70 74 3a 3a 48 72 Appt::Hr
0010: 43 68 65 63 6b 50 61 74 CheckPat
0018: 74 65 72 6e 20 66 61 69 tern fai
0020: 6c 65 64 2e 20 4d 61 69 led. Mai
0028: 6c 62 6f 78 3a 56 61 73 lbox:x
0030: 73 69 6c 69 73 2e 4b 6f xxxx.xxx
0038: 6e 74 6f 67 69 61 6e 6e xxxxxxx
0040: 69 73 40 45 55 52 4f 43 xx@xxxx
0048: 48 41 52 54 49 4b 49 2e xxxxxxx.
0050: 47 52 GR
Event Type: Error
Event Source: EXCDO
Event Category: General
Event ID: 8207
Date: 5/2/2015
Time: 11:19:41 πμ
User: N/A
Computer: EXCHANGESRV1
Description:
Calendaring agent failed with error code 0x8000ffff while deleting appointment.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 48 72 44 65 6c 65 74 69 HrDeleti
0008: 6e 67 41 70 70 74 3a 3a ngAppt::
0010: 5f 48 72 47 65 74 42 75 _HrGetBu
0018: 73 79 49 6e 66 6f 20 66 syInfo f
0020: 61 69 6c 65 64 2e 20 4d ailed. M
0028: 61 69 6c 62 6f 78 3a 56 ailbox:x
0030: 61 73 73 69 6c 69 73 2e xxxx.xxx
0038: 4b 6f 6e 74 6f 67 69 61 xxxxxxxxx
0040: 6e 6e 69 73 40 45 55 52 xxx@xxx
0048: 4f 43 48 41 52 54 49 4b xxxxxxxx
0050: 49 2e 47 52 I.GR
All the errors come ONLY FROM 1 USER.
How can i fix this errors?
If you require any further information do not
hesitate to let me know
Thanks and regards.You must ask in Exchange forum
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver -
Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010 => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server => successfully
6. Delete Routing Group Connectors to Exchange Server 2003 => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
"initials,displayName,physicalDeliveryOfficeName," & _
"telephoneNumber,mail,wWWHomePage,profilePath," & _
"scriptPath,homeDirectory,homeDrive,title,department," & _
"company,manager,homePhone,pager,mobile," & _
"facsimileTelephoneNumber,ipphone,info," & _
"streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB = NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
AlexI kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex -
Sccm 2012 agent not installing with error CcmSetup failed with error code 0x80041013
We have sccm 2012 r2 enviroment , when we deploy client agent to one DC , client agent is not getting install with below error .. I can able to install agent to all the machines except one DC.
CcmGetOSVersion failed with 0x80041013
CcmSetup failed with error code 0x80041013
Any idea ?The error code 0x80041013 translates to:
Provider load failure
Source: Windows Management (WMI)
Like Briij suggested, you should try to fix the WMI repository.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja
Maybe you are looking for
-
R3.0 Release and PUSH Capabilities
It has been several months since I jumped on this discussion grp... so this may have already been addressed? If memory serves me, the new (free) R3.0 release was to provide 3G (2nd gen) users a form of "PUSH" technology which was to accommodate some
-
Hi, I would like to know if I'm able to use my current VMWare windows installation through Boot Camp, I don't want to use fusion anymore but I'm hoping there's a way to set up boot camp and not have to re-install windows again, if anyone could let me
-
My lap top crashed and i lost everything on it , including all my photos and i tunes. I have put my music back on to the computer but is there a way of transferring my photos stored on my i pod back on to my laptop ? I apologise in advance for my poo
-
Splitting a family plan into two separate plans.
My ex-boyfriend and I have been sharing a family plan and would like to switch to two separate plans. I am the primary line on the account. Can we split our plans at any time or should we wait until both phones are up for the New Every 2? Also, my
-
i was texting and locked my phone and now it wont turn back on and i tried charching it and everything.. any other ideas?