Possible internal modem problem with older iBook (Mac OS X 10.3.8)

I have an older iBook - from year 2000 or 2001. So its airport card is so old it's stopped reliably working & I don't know where I could find a replacement. In the meantime I want to get internet connection on it so I've tried plugging a phone cord from the wall outlet (that I always use succesfully for my desktop PC) into the laptop and typing in the phone #, account name and password of my desktop's internet account under "internal modem." BUT I keep getting a busy signal over & over when I dial up. I called my ISP & they thought it's a problem with my laptop's modem. I called Apple & they thought it's an issue with the ISP. Help?

Hi,
So its airport card is so old it's stopped reliably working & I don't know where I could find a replacement.
If you have been using an internal wireless network, the router (base station) should (normally) allow you to connect via an Ethernet cable from the corresponding port in the iBook as well.
BUT I keep getting a busy signal over & over when I dial up
Without knowing any details, this seems to indicate that the modem does work. Wrong number/own number? Have you checked that everything has been entered correctly according to the instructions from the ISP?
Could KB article # 106748 possibly be of any help here?
Jan

Similar Messages

Internal modem problems with airport extreme

I have an airport extreme with an internal modem. I am unable to connect to the internet via the modem. also i can't print (hp 2200d) with my ubs port and airport. any suggestions will be helpful.

Open the AirPort Admin Utility.
Click on the Internet tab.
From the "Connect using:" menu select one of the modem options.
Then finish the configuration with the information from your dial-up ISP.
This information is in the "Designing AirPort Networks" document which can be found on the AirPort Support page.

I'm having problems with my Ibook G4

I'm having problems with my Ibook G4, I leave it in the car on a sunny day and he ended up overheating after I called and he started off alone. Soon after he turned over, and when I press the power button, it makes a strange noise, the fan rotates at high speed, but nothing appears on the screen, it would be any problem on the memory card? Can anyone help me? Thanks

Try reset of PMU and PRAM first and/or see if it can boot from a installation cd or dvd. Maybe try safe mode boot.
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/HT1431
http://www.mac-forums.com/forums/apple-notebooks/13136-notebook-instant-fixes-th read.html
Safe mode
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

Strange problem with my ibook, help!

Hi!
This is my firts post here, due to a problem with my iBook and I hope somebody can help me!
I power up my ibook and everything is as usual: i hear the fan, the sound chime, then I see the apple logo and the spinning gear but suddenly my ibook turn off! I don't know why, I can't access the login. Does anybody here can help me? How can I try to make it work? Is an hard drive problem or is the logicboard near to dead?
Thank you!
Luca

luca1985:
I fear the HD is near to dead.
I suggested you you might check that in an earlier post. You can also go to Apple Menu > About this Mac > More Info > Hardware > ATA. Look for S.M.A.R.T Status in lower section in right panel. If it reads Verified your disk is ok for now.
Can i repair it by myself someway?
If the hardware has failed the only solution is replacement. If the formatted volume has difficulties, it can be repaired with Disk Utility, or utilities like Disk Warrior or Tech Tool Pro
Good luck.
cornelius

Problem with facetime for mac

hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what...

Problem with Twitter for Mac notifications

Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.

Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS!

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Bex analyzer - internal error problem with table c_t_variable

HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AM

Hi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok

I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?

I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?

As usual those "news" reports mangled the facts and got most of the story completely wrong. This particular attack did not arise through a Java update, it was distributed through a fraudulent Flash download popup window, or malicious websites that Safari is designed to block.
If you run Java on your Mac you may be vulnerable to this malware. If you do not run Java there is no risk. If you routinely keep your Mac up to date with Software Update the risk is greatly reduced.
Shut off the mass market junk that masquerades as "news" and read this to learn some real facts:
https://discussions.apple.com/docs/DOC-3271

Is Anyone else having problems with their I MAC 24" Foggy display?

Is anyone else having problems with their I MAC 24" having a foggy display in lower right hand corner after the computer has been on for 30 or 45 min? This is now the 2nd computer that has this same problem. Just wondering if anyone else is having this issue with the IMAC 24"? Does anyone know what might be the cause? I have only had the computer for a month. Thanks very much.

Thank you for the nice welcome.
Sorry about posting in the wrong area I found the correct discussion board. http://discussions.apple.com/thread.jspa?messageID=7998535#7998535
Its seems that I am not alone in my problem but I do have good news to report that apple support has acknowledged the issue is happening and a fix is in the works. The support and assistance I received today helped greatly to restore my faith in apple product satisfaction.
Lets hope you don't have this experience in the future, hopefully a solution can be reached that is in everyone best interest. I may have to drive a greater distance to another apple store but for myself and others like me feel its worth the extra effort to get better customer service in the long run.

I have problems with sync ibooks from iTunes to my iPad since i update to ios7

i have problems with sync ibooks from iTunes to my iPad since i update to ios7

first you plug your device into your computer, then you select the name of your device on the left side of itunes. then you select 'apps' from the top center of the itunes window, and you check the apps that you want to go from the computer to the device
once you've done that, you press the 'apply' button in the lower right corner
this will be the same for anything you want to go from the computer to the device
you'll select the appropriate tab at the top, then only check information you want to go from the computer the device and then hit 'apply'

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Unresponsive keyboard/trackpad and intermittent Bluetooth on MacBook...possible internal USB problem?

I have a mid-2010 polycarbonate/white MacBook (model A1342) running OS X 10.6.8. My machine has been having issues with the internal Bluetooth and keyboard/trackpad randomly ceasing to function.
Bluetooth issue
As of recently (the past month or two), the Bluetooth adapter will completely disappear and eventually reappear on a random basis. It won't appear at all in System Profiler, and the BT menu says "not available". Also, I have had a few kernel panics recently, all of which were apparently thrown by a Bluetooth process/daemon/driver (unfortunately I forgot which one, and also lost the logs from the panics.)
My system has a Broadcom Bluetooth chip that's part of the AirPort card, but is basically just an internal USB device. The adapter has some sort of integrated USB hub ("BRCM2070 Hub"), which the "Bluetooth Module" device itself is connected to.
Nonetheless, this seems to be some sort of problem on the USB bus. Whenever there is a failure, I will almost always see output in Console showing USB errors (ie errors about "enumerating a USB device", "clearing port power", "setting port power", "getting port status", etc). It will either be on any of the ports of the hub at 0x6600000 (the "BRCM2070 Hub" that "Bluetooth Module" is connected to), or port 6 of the hub at 0x6000000 (BRCM2070's port on the internal bus, which the keyboard/trackpad is also connected to on port 3).
I can post more/longer ones, but here's a somewhat short example of the error messages I might receive:
11/18/12 3:18:36 PM kernel USBF: 7351.492 [0xcf9b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of Hub at 0x6000000)
11/18/12 3:18:38 PM kernel USBF: 7353.987 AppleUSBHubPort[0xcf9b300]::FatalError - Port 6 of Hub at 0x6000000 reported error 0xe00002c7 while doing clearing port power feature
11/18/12 3:18:38 PM kernel USBF: 7353.987 [0xcf9b300] The IOUSBFamily was not able to enumerate a device.
11/18/12 3:20:20 PM blued[448] Apple Bluetooth daemon started
11/18/12 3:20:20 PM kernel USBF: 7456.186 [0x11fb1300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0x6600000)
11/18/12 3:20:20 PM kernel USBF: 7456.188 [0x11fb1300] The IOUSBFamily was not able to enumerate a device.
Keyboard/trackpad issue
There's also an issue where the internal keyboard/trackpad will randomly cease functioning (until I restart), often a couple of times a day as of recently. I've had this issue on rare occasion for a while now, but it's gotten more frequent. And more recently, the caps lock light on the keyboard occasionally turns itself on when I'm away.
Both the internal keyboard/trackpad as well as the Bluetooth "hub"/device are connected to the same USB bus/hub. When the keyboard/trackpad die, I've noticed that there will be very similar messages in Console to those above and usually a Bluetooth failure at the same time. (In some cases, it seems to notice that the keyboard/trackpad isn't responding, then attempts to reset/reinitialize it...ie log below.) What could the root cause be...could it be the USB "root" hub/bus causing one or both of these to fail, or possibly a problematic device causing the other to lose connection? I haven't had issues with USB devices on other buses failing, though (ie no problems with external devices.)
Maybe more out of curiosity than anything else, but I've been poking around for info on what might be going on with the USB (aside from the 0x66 hub repeatedly dropping/reconnecting and etc), but can't find much. There seems to be no documentation about the error codes (ie 0xe00002c7) that the hardware/OS are relaying. I even poked through the source for some of the relevant kexts and some reading on OS X driver/kernel programming too...might as well learn more about the inner workings of OS X
Here's an example of some of the messages that I get about the Keyboard/Trackpad:
11/21/12 2:57:22 AM kernel USBF: 1439.228 IOUSBHIDDriver(AppleUSBMultitouchDriver)[0xd1ff000]: Detected an kIONotResponding error but still connected. Resetting port
11/21/12 2:57:22 AM kernel USBF: 1439.234 AppleUSBHubPort[0xd040600]::Resetting device Apple Internal Keyboard / Trackpad: port 3 of Hub at 0x6000000
11/21/12 2:57:22 AM kernel USBF: 1439.319 [0x14452600] USB HID Interface #0 of device CompositeDevice @ 5 (0x6610000)
11/21/12 2:57:22 AM kernel AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
11/21/12 2:57:23 AM blued[248] Apple Bluetooth daemon started
11/21/12 2:57:23 AM kernel AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
Attempted fixes
Unfortunately, my Macbook isn't under warranty so I'm mostly on my own. First I zapped PRAM, reset SMC, ensured OS updates are installed (still on 10.6.8), and threw out a few drivers/software that were possible troublemakers. Next, I tried running another OS/install to rule out software issues. Accordingly, I found that the BT adapter sometimes disappears on Windows 7 as well (just did a clean install). And finally, I bought a new AirPort/BT card and installed it the other day. That seemed better at first, but I still have the problem of intermittent Bluetooth and keyboard/trackpad.
Problems/solutions?
What might the issue be, or is there anything that may be worth trying? As I mentioned, I've reset PRAM and SMC, made sure it's not an OS/driver issue (it happens on Win7 too), and replaced the Airport card. The machine does have aftermarket RAM (from OWC, ~2 years old) and SSD (Crucial M4, installed September)...but it seems unlikely that either of these would cause the problem. There haven't been any accidents that would have caused physical or (to my knowledge) electrical damage to it.
I also searched for any occurrences of similar problems, but could not find any that were applicable to the Macbook revision in question. There was a similar keyboard/trackpad issue on older Macbook Pros that was caused by stress on a ribbon cable...but that seems unlikely given the concurrent issues with Bluetooth as well as the different design.
The only thing I can think of next is to possibly replace the cable connecting the Airport card to the logic board, and possibly look at replacing the keyboard/trackpad (topcase). Anyway, I'm worried that it might be a hardware issue with the internal USB controller/hub, which would probably mean that it's unfixable unless I replace the logic board.
Any advice as to which of these might be a potential solution or cause of the problem? Or might I just as well sell it off in its current condition and replace it?
Thanks all!

Has anyone find a fix for this? I've been using my Dragon Dictate headset on my MacBook Pro for about a year, and then today, when I plugged it in, I got this:
4/16/14 10:01:04.000 AM kernel[0]: USBF:    47.766    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0x4000000)
4/16/14 10:01:07.000 AM kernel[0]: USBF:    50.269    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x4000000 reported error 0xe00002c7 while doing clearing port power feature
4/16/14 10:01:07.000 AM kernel[0]: USBF:    50.269    The IOUSBFamily was not able to enumerate a device.
Here is what I have tried so far:
Reset the PRAM
Reset SMC
Verify disk (there were no problems)
Repair permissions
Boot with an external USB hard drive (which works fine on the "problem" computer) that contained an old SuperDuper clone of my hard drive from several months ago. I received the same "The IOUSBFamily was not able to enumerate a device" error when I plug in the headset.
Tried to headset on another computer, and it worked fine.
Plug in an external USB keyboard into the problem computer, and it works fine.
All of this would lead me to conclude that it is a hardware problem. But it seems that if it were a hardware problem, the external USB keyboard and external USB hard drive would not work (which they do). If the problem were with the headset, it wouldn't work on another computer, but it does. So I'm wondering if it's some sort of firmware issue…??????? URG!!!!!!

Possible internal modem problem with older iBook (Mac OS X 10.3.8)

Similar Messages

Maybe you are looking for