Possible issue with Web service connections in SP3

Hello,
I installed Xcelsius 2008 SP3 over SP2 and some of my input values for my web service connection were not being built into the XML request. I then rolled back to 2008 SP2 and all was fine. Not a thing i tried could fix it, and it was not all the input values just some of them and the same ones each time. Perhaps i installed different Xcesius suites: the SP2 one i have is trial version and has a black BO splash, the SP3 one has a yellow SAP splash. SP3 has some funky enhancements so i would certainly like to go that way. Any ideas? Or ideas as to how i could get this into BO support for troubleshooting?
Regards,
Gilbert

By mistake I posted to this thread. Removing my message.
Edited by: Anil Kumar on Dec 24, 2009 4:55 AM

Similar Messages

  • Error with web services connection to B1 DI API

    We are attempting to utilize the web services connection to SAP Business One and are running into difficulty.  Below are the particulars:
    -   We are attempting to make a web services connection to B1 using PHP on Linux.
    -   We are able to establish a session, but not able to make a successful web services request.
    -   The attempted action is to add a Business Partner
    -   Error we are receiving:
    SoapFault exception: Not Found in /var/www/test.php:83 Stack trace: #0 : SoapClient->__doRequest('__call('Add', Array) #2 /var/www/test.php(83): SoapClient->Add(Array) #3
    -         We are also able make a successful web services request to the same B1 server using ASP from Windows.
    -         Once we establish a session through PHP / Linux, the DI Server will not respond to either PHP or ASP on Windows
    Any advice or suggestions would be appreciated.

    Russell,
    Since you are getting a "SoapFault Exception", you must be trying to use SOAP messaging.  The DI API does not understand SOAP messages.  You would need to use the DI Server (SDK Help has information on DI Server) for SOAP based messaging and in turn you may also want to look at the Business One Web Services (B1WS) tool that s located in the Tools section of the SAP Business One main page here on SDN.
    HTH,
    Eddy

  • Issue with web part connections : won't display data when the lookup field is a calculated field

    Hello,
    I have a list A with a calculated field named A.A. I have a list B that has a lookup field to list A, to field A.A, named B.A. I add the two lists in a wiki page and I try to connect them - I.E., select a row from A and the rows from B would be automatically
    filtered.
    The B\Connections\get filtered values from A and select Provider:A.A, Consumer B.A doesn't bring any results. If I do the exact opposite: A\Connections\get filtered values from B and select Provider:B.A, Consumer A.A  works fine. But, this is not what
    I want.
    If the A.A isn't calculated field, everything works fine. So, it looks like there's an issue with calculated fields acting as consumers.
    Is this a known issue and are there any know workarounds? A workaround is to abandon calculated field and  use sharepoint designer workflow.
    Thank you
    Christos

    Hi,
    According to your post, my understanding is that you had issues about connecting web parts.
    I try to reproduce the issue, however, everything works well.
    Create a custom list named List A, add a caculated column named A.A(Formula: =Title).
    Create a custom list named List B, add a lookup column named B.A(List A: A.A).
    Create a page and then insert the two list view web parts.
    Edit page, select List B->Connections->Get Filtered Values From List A.
    Then I can filter the List B.
    I recommend to create another caculated column and get filter value form it to check whether it works.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Security issue with Web Services on Oracle SOA suite? (Serious?)

    Hi,
    I have recently installed and set up the SOA 10.1.3 on my local machine.
    I created a simple test web service and deployed - worked ok.
    I then added simple plain text security to the service, and again opened it up for testing using the test service function.
    Initially, it returns with the expected message 'missing soap header security'.
    However if you refresh the page / or test the service again, it is then invoked - seemingly bypassing the security !!!
    Oddly the 3rd attempt then shows the security message again, and it seems to alternate between allowing access to the service and imposing the security?!?!
    Has anyone else experience this ?
    Is it a bug ? (if so, its a pretty nasty one that could quite possibly catch alot of people out !)

    I have now created an independant client in Java to call the WS.
    The security is still bypassed on ever other call?!?!
    I have this over HTTPS also, and was hoping this would provide an adequate means of securing my web services.
    How is everyone else securing web services that are exposed to general consumers? Maybe i should find a new approach !

  • Issue with Web Service Security

    Dear Forum Members and Readers,
    I am a beginner to Web Services, and facing an issue with WS-Security.
    My issue seemingly is quite specific to my projects though, It will be great if you can provide me your views.
    Context Description:
    I am developing a Java Web Service application that is deployed on JBoss Application Server.
    This application will communicate with two other applications those are not deployed in same JBoss Application Server.
    These 2 applications are third party applications, one is C++ based web services and other is Java based web services.
    My application gives a call to Third Party Application1 and receives the response back form it. It then passes this received response to Third Party Application 2.
    Issue Description:
    I now need to enable https paradigm among these 3 applications. (I need to implement web service security model here)
    I started with looking in to JBoss specific WS-Security but found it not suitable in my case, as it requires to configure both the client and server. I have the control over my application but not on other 2 third party applications.
    To this extent, I am unable to identify a solution that can address my issue.
    Can anybody please provide me with initial thoughts or any reference material that might help me to give this a start.
    Any clue will be highly appreciated!
    Thanks in advance
    Mukul

    mukul.object wrote:
    Actually, my SOAP messages contains some critical information that needs to be encrypted.You think that its critical information however your third party doesn't. If they would have had same thought they would have enabled the security. As I said earlier, you will have to discuss this with them.
    Another solution (however I don't know the viability in your case) could be to deploy one component before each third party service. Your web service will call this new component (Which is installed in their environment i.e. local to third party web service) and new component will forward the request to third party service. Now you can apply security/encryption/decryption between your web service and your component.
    I have had a look in to XMLEncrytion using that I can encrypt my SOAP messages but I wonder how would other tools decrypt that.My above comments answers this.
    Is there anyway I can encrypt my SOAP messages (without having to customize third party tools) in this scenario ??My above comments answers this.

  • What's possible issue with original Airport?

    Hi,
    I recently just purchased a used Powerbook G4 867 512M and installed an original airport card. The signal strength indicator seems to flicker in and out from no strength to highest but mainly resting at the "second" bar strength. This laptop is sitting next to a G4 tower which is getting full strength. Is there a possible issue with my laptops connectivity? Should I re-seat the airport card? What could be the issue?
    Thanx in advance.

    Hi,
    Duane. Althoughity, I didn't verify whether the card had any physical connectivity issues, I don't think that is the problem. I made the simple move in location and that seem to have change the "bar" strength. I guess where I was was not a good area for network connectivity. Thanks for possible solutions and causes.

  • Is it possible to call web services in adobe connect application?

    I have facing one security issue  in adobe connect
    Error Description is "Security error accessing url
    Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://xxxxxx/WebService.asmx?wsdl)"
    Is it possible to call web services in adobe connect application?
    Thanks and regards
    Selvan

    OK, so it's a plain Flex security issue, not related to the Connect application, probably due to crossdomain misconfiguration.
    Please read http://www.adobe.com/devnet/articles/crossdomain_policy_file_spec.html and http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security.html
    You may want to ask for help in the proper Flex forum. Also, download Tour de Flex and look at the example under "Flex Data Access3 -> "WebService".
    Try also to look at this thread http://forums.adobe.com/thread/223999

  • Issues with our SSL connection to the Web dispatcher

    HI Alle,
    I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
    Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
    [Thr 368] =================================================
    [Thr 368] = SSL Initialization  on  PC with Windows NT
    [Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 368] =   found SECUDIR environment variable
    [Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 368] * ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 4129 (0x00001021) = "The PSE does not exist"*
    [Thr 368] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] << -
    End of Secude-SSL Errorstack -
    [Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
    [Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 368] =================================================
    [Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
    [Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    [Thr 2128] IcmCreateWorkerThreads: created worker thread 0
    Regards

    Hi Olivier,
    Thanks for replay,
    The PSE does exist  in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"  .
    I did tried Again I get  this error. I think I missing som parameter
    = SSL Initialization  on  PC with Windows NT
    [Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 2292] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 2292] =   found SECUDIR environment variable
    [Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
    [Thr 2292] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    -*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    [Thr 2292] << -
    End of Secude-SSL Errorstack -
    [Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
    [Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 2292] =================================================
    [Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
    [Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    Her is my profile parameter for https.
    h6*#Https parameters for Web dispatcher  E:\usr\sap\WDP\W00\sec
    #icm/server_port_0 = PROT=HTTPS,PORT=443$$
    DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
    ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssf/name = SAPSECULIB
    wdisp/ssl_encrypt = 0
    icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
    ###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
    ########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
    icm/HTTPS/verify_client=0
    wdisp/add_client_protocol_header = true
    wdisp/auto_refresh = 120
    wdisp/max_servers = 100
    wdisp/ssl_auth= 0
    ms/https_port = 8400
    wdisp/HTTP/use_pool_for_new_conn=1
    wdisp/HTTPS/dest_logon_group = HTTPS
    #wdisp/server_info_protocol = https
    #wdisp/group_info_protocol = https
    #wdisp/url_map_protocol = https
    wdisp/ssl_ignore_host_mismatch = fals
    icm/HTTPS/forward_ccert_as_header = true
    icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
    icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
    Regards

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • Problem with web service proxy and connections.xml

    JDev 11.1.14
    Hello
    I'm trying to create a web service proxy that takes advantage of the connections.xml so that the endpoints can be changed without recompiling the code (as described here http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/web_services.htm#ADFFD548 - 13.2.2 How to Create a New Web Service Connection)
    I created the web service proxy using the Jdev wizard and a test client. The access to the web service works as expected.
    The client test code is :
    package model;
    import ch.mit.trac.ws.proxy.*;
    import ch.mit.trac.ws.root.Currency;
    import javax.naming.NamingException;
    public class wsTest {
      public wsTest() {
        super();
      public void testIt() throws NamingException {
        CurrencyConvertor currencyConvertor = new CurrencyConvertor();
        CurrencyConvertorSoap currencyConvertorSoap = currencyConvertor.getCurrencyConvertorSoap();
        Double res = currencyConvertorSoap.conversionRate(Currency.CHF, Currency.USD);
        System.out.println("Hello");
        System.out.println(res);
      public static void main(String [] args) throws NamingException {
        wsTest tt = new wsTest();
        tt.testIt();
    }I then create a connection as described in the docs.
    I now have a connections.xml as follows:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <References xmlns="http://xmlns.oracle.com/adf/jndi">
       <Reference name="CurrencyConvertor" className="oracle.adf.model.connection.webservice.impl.WebServiceConnectionImpl" xmlns="">
          <Factory className="oracle.adf.model.connection.webservice.api.WebServiceConnectionFactory"/>
          <RefAddresses>
             <XmlRefAddr addrType="WebServiceConnection">
                <Contents>
                   <wsconnection description="file:/C:/JDeveloper/mywork/WebServiceTest/Model/src/ch/mit/trac/ws/proxy/CurrencyConvertor.wsdl" service="{http://www.webserviceX.NET/}CurrencyConvertor">
                      <model name="{http://www.webserviceX.NET/}CurrencyConvertor" xmlns="http://oracle.com/ws/model">
                         <service name="{http://www.webserviceX.NET/}CurrencyConvertor">
                            <port name="CurrencyConvertorHttpPost" binding="{http://www.webserviceX.NET/}CurrencyConvertorHttpPost">
                               <operation name="ConversionRate">
                                  <output name=""/>
                                  <input name=""/>
                               </operation>
                            </port>
                            <port name="CurrencyConvertorHttpGet" binding="{http://www.webserviceX.NET/}CurrencyConvertorHttpGet">
                               <operation name="ConversionRate">
                                  <output name=""/>
                                  <input name=""/>
                               </operation>
                            </port>
                            <port name="CurrencyConvertorSoap12" binding="{http://www.webserviceX.NET/}CurrencyConvertorSoap12">
                               <soap addressUrl="http://www.webservicex.com/CurrencyConvertor.asmx" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                               <operation name="ConversionRate">
                                  <soap soapAction="http://www.webserviceX.NET/ConversionRate" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                                  <output name=""/>
                                  <input name=""/>
                               </operation>
                            </port>
                            <port name="CurrencyConvertorSoap" binding="{http://www.webserviceX.NET/}CurrencyConvertorSoap">
                               <soap addressUrl="http://www.webservicex.com/CurrencyConvertor.asmx" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                               <operation name="ConversionRate">
                                  <soap soapAction="http://www.webserviceX.NET/ConversionRate" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                                  <output name=""/>
                                  <input name=""/>
                               </operation>
                            </port>
                         </service>
                      </model>
                   </wsconnection>
                </Contents>
             </XmlRefAddr>
          </RefAddresses>So far so good.
    I then created a new jspx page with a button that calls a method in a request scoped bean.
    The method is supposed to use the connections.xml to get the web service proxy in order to call the web service.
    The bean code is as follows :
    package ch.mit.test;
    import javax.faces.event.ActionEvent;
    import ch.mit.trac.ws.proxy.*;
    import ch.mit.trac.ws.root.Currency;
    import javax.naming.Context;
    import javax.naming.NamingException;
    import oracle.adf.model.connection.webservice.api.WebServiceConnection;
    import oracle.adf.share.ADFContext;
    public class test {
      public test() {
      public void testIt() throws NamingException {
        Context ctx;
        ctx = ADFContext.getCurrent().getConnectionsContext();
        WebServiceConnection wsc;
        wsc = (WebServiceConnection) ctx.lookup("CurrencyConvertor");
        CurrencyConvertor currencyConvertor = wsc.getJaxWSPort(CurrencyConvertor.class);   -- NPE here
        CurrencyConvertorSoap currencyConvertorSoap = currencyConvertor.getCurrencyConvertorSoap();
        Double res = currencyConvertorSoap.conversionRate(Currency.CHF, Currency.USD);
        System.out.println("Hello");
        System.out.println(res);
      public void testws(ActionEvent actionEvent) {
        try {
          testIt();
        } catch (NamingException e) {
    }When running the application and clicking on the button I keep getting the following error at the line marked NPE Here above:
    <LifecycleImpl> <_handleException> ADF_FACES-60098:Le cycle de vie Faces reçoit des exceptions non traitées en phase INVOKE_APPLICATION 5
    javax.faces.el.EvaluationException: java.lang.NullPointerException
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: java.lang.NullPointerException
         at java.lang.Class.isAssignableFrom(Native Method)
         at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:97)
         at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:118)
         at oracle.j2ee.ws.common.jaxws.runtime.OperationMappingModeler.processParameters(OperationMappingModeler.java:268)
         at oracle.j2ee.ws.common.jaxws.runtime.OperationMappingModeler.processMethod(OperationMappingModeler.java:155)
         at oracle.j2ee.ws.common.jaxws.runtime.ServiceEndpointRuntimeModeler.buildRuntimeModel(ServiceEndpointRuntimeModeler.java:114)
         at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.getRuntimeMetadata(WsClientProxyFactory.java:69)
         at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.createProxy(WsClientProxyFactory.java:126)
         at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.createProxy(WsClientProxyFactory.java:106)
         at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.getPort(ServiceDelegateImpl.java:219)
         at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.getPort(ServiceDelegateImpl.java:249)
         at oracle.adf.model.connection.webservice.impl.WebServiceConnectionImpl.getJaxWSPort(WebServiceConnectionImpl.java:399)
         at ch.mit.test.test.testIt(test.java:27)
         at ch.mit.test.test.testws(test.java:41)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(Unknown Source)
         at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
         ... 44 moreCan anybody help as to what the problem is...
    (the WSDL is at http://www.webservicex.com/CurrencyConvertor.asmx?WSDL)
    Regards
    Paul

    Hi Frank
    The page is ADF bound, I've added the page source and the adfc-config source below :
    Page
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:f="http://java.sun.com/jsf/core"
              xmlns:h="http://java.sun.com/jsf/html"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <jsp:directive.page contentType="text/html;charset=UTF-8"/>
      <f:view>
        <af:document id="d1">
          <af:form id="f1">
            <af:commandButton text="commandButton 1" id="cb1"
                              actionListener="#{test.testws}"/>
          </af:form>
        </af:document>
      </f:view>
    </jsp:root>adfc-config
    <?xml version="1.0" encoding="windows-1252" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
      <view id="view1">
        <page>/view1.jspx</page>
      </view>
      <managed-bean id="__4">
        <managed-bean-name id="__3">test</managed-bean-name>
        <managed-bean-class id="__2">ch.mit.test.test</managed-bean-class>
        <managed-bean-scope id="__1">request</managed-bean-scope>
      </managed-bean>
    </adfc-config>It seems to be the same sort of problem as in Re: Error in ADF Web Service Connection
    Regards
    Paul

  • Calculations in Xcelsius using data generated by a Web Service Connection

    Hi,
    I have set up a web service connection to pull in 4 columns of data: 1. CATEGORY  2. SUBCATEGORY 3. PRODUCT TYPE   4.#OFCALLS.  There will be anywhere from 1 to 500 rows of data depending on day of week and time of day.  The web service sorts the list by #OFCALLS descending. The OUTPUT VALUES of the web service connection are mapped to cells A19:D518.
    Formulas in the spreadsheet take the Top 10 from the list and populate it to cells  A4:D13.  A formula in cell D15 sums the #OFCALLS for the entire web service connection output (A19:D518).
    The data in A4:D15 is mapped to a spreadsheet table on my canvas.   When the report generates, the data from the TOP 10 of the web service connection populates properly, but the cell that should reflect the TOTAL#OFCALLS (D15) shows zero.
    Is it not possible to do additional calculations in the spreadsheet based on data generated by the web service connection?  A major difference between using an XML Map and a Web Service Connection is the XML Map actually populates the spreadsheet with the new data when it is refreshed.  The Web Service connection data never actually appears in the spreadsheet itself, even though it updates to the appropriate vessel on the canvas.   This makes me think that no additional calculations can be done in the spreadsheet based on the web service connection data.
    Can anyone tell me if that is correct?  If so, then the web service connection would also have to pull in the TOTAL#OFCALLS along with the other data.   This would also seem to greatly limit what you could do with data generated by a web service connection, so I am hoping I am wrong and just don't understand how to do this.
    Can anyone clarify this for me?  If I failed to give any pertinent info let me know what it is, and I will update my post.
    Thanks!

    I have seen similar behavior as well.  I have live data coming into Xcelsius from a data connection. 
    A supported Excel formula
    =IF(ISBLANK(J2),I2,VALUE(TODAY()-J2))
    is then applied to one of the columns to create an additional derived column.
    Taking a snapshot of the data shows that the derived column is being populated, however the controls I've tried hooking up to the derived column (charts and labels) are always empty.
    Information on whether this is supported would be appreciated.
    Thank you,
    David

  • How to do a InsertOrUpdate with web services 2.0

    I understand that InsertOrUpdate method is just valid for Web Services 1.0.
    a) Is there a way to do it with web services 2.0 ? I imagine using a query and then Update or Insert.
    b) if we decide to use web services 1.0 would there be any cons ? (besides a possible performance issue as in the documentation)
    c) InsertOrUpdate uses the record "user key" for identification. If need to identify using another field, I suppose that the only way is thru query, etc. Any other ideas ?
    Txs. for any help.
    Antonio

    Hello Antonio,
    I understand that InsertOrUpdate method is just valid for Web Services 1.0.Correct, the InsertOrUpdate method is not available in WS v2.0.
    a) Is there a way to do it with web services 2.0 ? I imagine using a query and then Update or Insert.That is one possibility, however it means that every insert or update would consist of two operations. I would suggest reviewing your requirements and expected use cases for a way to determine whether a record is being inserted or updated within CRMOD. The specific approach would depend on whether how the records to be entered into CRMOD are compiled (i.e. user interaction vs. batch sync component)
    b) if we decide to use web services 1.0 would there be any cons ? (besides a possible performance issue as in the documentation)There are some objects that are not supported for WS v1.0 as well as the fact that field coverage is not as complete as the WS v2.0 interface.
    c) InsertOrUpdate uses the record "user key" for identification. If need to identify using another field, I suppose that the only way is thru query, etc. Any other ideas ?Only certain fields or sets of fields can be used as a user key. These are described in the WS user guide. You can query on other fields to find a record in CRMOD but a unique value must be provided to identify a record for an update operation.
    Thanks,
    Sean

  • Slow response when using Xcelsius web service connection witn input values

    We've been very successful in using the Xcelsius Web Service Connection. We've recently moved forward toward using input values when calling a web service and having issues with response time. Without input values, it takes 3 - 6 seconds to retrieve and display the results in Xcelsius, but, when using the input values to the web service, it takes about 27 seconds for Xcelsius to retrieve and display the results.  Does anyone have experience with fixing slow response associated with using input values for a web service connection?

    Hi Sharone,
    What's the version of your Xcelsius and BOBJ server?
    I'm asking because using the last version of BOBJ server (BOXI 3.1 SP 3) you have new services on CMC just to help Xcelsius to work better with WebServices.
    Regards,
    Rodrigo.

  • Web Service Connection in Xcelsius 2008

    I have recently upgraded from 4.5 to Xcelsius 2008 and am having trouble getting the Web Service Connections set up correctly for my QaaWS.
    I have 7 LiveOffice connections in a model that seem to all refresh on load fine and i have already set up a Web Service Connection that picks up the drill through path of what the user has clicked on and used them as input parameters to a QaaWS query.
    I now need to add another Web Service Connection for another QaaWS and i get the following error message;
    "Unable to Load URL"
    I have checked the available QaaWS services using dswsbobje/qaawsservices and the 2 queries appear as i would expect.
    I have checked the dsws.properties file and the user name and password are correct (which i would expect as teh 1st connections works in the Xcelsius model.
    I have restarted the Tomcat server and CMS and this does not cure the problem.
    I have even tried re-installing QaaWS.
    I have installed SP1 fix 1 for 2008. I am currently using XIR2 SP2.
    Can anyone help as sometimes this functionality works and sometimes it does not. The 2 queries i want to use point aty teh ssame database and BO Universe.
    Edited by: Anthony Jones on Jan 8, 2009 12:18 PM

    Hi Anthony,
    You might check that type of the licence type of the user QaaWSPrincipal. I had a problem where the QaaWSPrincipal user was Concurrent Access License while my server was Named User only. Switching to Named User resolved the problem.
    However, I am not sure that this is your issue as the you have one QaaWAS url working. YOu might want to check your URL is available
    try
    http://<name of server>:<Tomcat port number>/dswsbobje/qaawsservices
    This contains a list of all URLs. Finally, you might look at importing the wsdl into other applications to see if the issue is Xcelsius or QaaWS related. You can copy to MS Office InfoPath with steps described below.
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_query_as_a_web_service_en.pdf
    Hope this helps
    Alan

  • Web Service connection timeout

    How to configure the web service connection timeout properties (eg. weblogic.wsee.transport.connection.timeout) in configuration files rather setting them at client's stub code?
    Help is appreciated.

    This might be due to following reasons.
    Please check whether firewall exist between Pi and external system. If so check with  network team weather port or connectivity is established between PI server and external system. This should be the main reason.  Also check the target URL and see whether you can able to consume the webservice directly from Soapui without PI.  If your workstation is within PI's landscape and you see the same timed out error, then the network connectivity is the issue.  Ask them to enable the port.

Maybe you are looking for