Possible issues changing name of vlan interface
Hi
I will be making some changes to the way our ASA 5505 is configured over the next few weeks. It is used mainly for our phone VPN clients to connect to our internal CME. The issue is that I shall be changing the inside network to another vlan and another IP address, although the name will be staying the same. I know that this will remove all the config which uses that interface name, such as NAT translations etc but my main concern is that when I put them back in again with the same name it may confuse the ASA in some way and just not work.
Has anyone had any experience with this as I would really like to know possible issues before I get to them.
Thanks very much in advance
Jake Bowe
Hi Barbara, Glad you are around the Forums.
Will it confuse any Backups or Clones OP has made on say a FWHD?
Similar Messages
-
Is it possible to change name on bill?
I am wondering if it is possible to change the last name on the bill? When I signed up I used my maiden name as my middle name and it was entered as my last name? Is is possible to change it to my married name?
I would like to change the name on the account to my daughter. <Personal information removed for privacy per the Verizon Wireless Terms of Service.>
<Contact customer service at *611 on your Verizon Wireless phone or 1-800-922-0204 from other phone.>
Message was edited by: Verizon Moderator -
I teach at a school that is using netbooks next
year - the screen size is 1024 x 576 for one model and 1024 x 600 for another model and color quality is 32 bit. To
our dismay, when we loaded Lego Mindstorms software to test it, we
discovered that the user interface is fixed at 1024 x 800, which means
the control panel at the bottom of the screen is inaccessible on the
netbooks. Is there a way to change the interface size so that we can
use the software on netbooks? This is a serious issue for us! Thanks
for any help.
I posted this question in the LabView for Lego Enthusiasts forum, but noticed that nothing new has been posted by the moderator since 2007. That's why I posted it in an active forum. Thanks.
Message Edited by mwert on 03-27-2009 11:33 AM
Melissa J. Wert
Technology Integration Specialist
Harpeth Hall School
Solved!
Go to Solution.Hi All,
To echo Dennis Knight and as a FYI for others I refer everyone to KnowledgeBase 44DF7BQ0 How Does National Instruments Support The LEGO® MINDSTORMS® NXT Software And ...
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources -
How do I change the names of artists or gendre in the itunes list after importing an album? Is it posssible to change that information?
Yes. Select one or more tracks (use ctrl or shift clicks to add/remove or extend a selection) then right-click or press CTRL-I to Get Info. Use the different tabs of the dialog to make changes.
For general advice on getting things neat & tidy see my article on Grouping tracks into albums.
tt2 -
I have a problem, we have a vendor named vendorA. In one day, vendorA changed their name to vendorB. Then my colleague change the name on vendor master. I would like to know it is better create a new vendor code or modify the exist one? Since we still issue PO after changed the vendor name, that means all PO related to this vendor, including new name and old name. If i create a new vendor code for new name, is it possible to transfer the to new vendor code, credit old vendor code, debit new vendor code. Thanks!
Hii,
Do not change Name of the exesting vendor into new name , it is better to create a new vendor code unless it will be difficult for you to scrutiny of vendor data.
Create a new vendor code & then find out the data which needs to be booked in new vendor code.
For this , you have to pass two seprate entires by using intermidiary account
For Eg.
if old vendor having credit balance
Old Vendor a/c Dr.
to Intermidiary a/c
& then
Intermidairy a/c Dr
to New Vendor a/c
Note : In both the entried you have to use one common profit center
Regards,
Umesh -
HSRP Issues on VLAN interfaces
We are experiencing an issue with HSRP and VLANS. We have the VLANS tracked to physical interfaces, with the default decrement value of 10.
When we physically fail the fiber circuit (pull fiber transmit) the physical port reports down condition. The VLAN reports that it is still up. BOTH routers report that they are the active router and connectivity is lost.
When the physical port is shut down, the failover takes place and the routers report their state as predicted.
Any help would be greatly appreciated.
These routers are 4506's running 12.1(19)EW code
on WS-X4515 module.If there are still active ports, then I would expect the VLAN interface to stay UP on both routers. However, I would not normally expect both routers to be ACTIVE. Could it be that when you take down these physical links, that the routers lose sight of each other as far as the Hellos are concerned?
About the "If there are still active ports" bit ... don't gorget that a trunk can also constitute an active port in this sense. So if you have go any access switches uplinked to these 4506s, the trunks will be enough to keep the VLAN interface alive.
Remember also that HSRP has a hold time of only 9 seconds by default, whereas 802.1d Spanning Tree has a convergence time up to 50 seconds by default. So it is possible that if the link you are disconnecting is the active root port of a switch, that the two HSRP routers will lose sight of each other. In that case,they can both become active for a few seconds. Effectively, during the STP convergence the VLAN can be partitioned. It all depends on your topology.
You are pulling only the transmit fiber. I wonder if enabling UDLD would help here.
As Georg says, it would be useful to know a bit more about the topology and the configuration.
Kevin Dorrell
Luxembourg -
Possible to change the xml output of the Inbound Interface?
Hi All,
I hav a scenarion where a third party system receives the XML from XI. the output of the xml from XI looks as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
- <ns1:WMSItalyItemReplication xmlns:ns1="http://cpe.com/cpe_ftp_wms/ItemReplication">
- <item_dl dt_tm_created="2006-06-29 09:02:23">
- <item action="" owner_id="CIB" itm_num="3143832ZZ99">
<itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a />
<itm_udef_b />
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d />
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
</ns1:WMSItalyItemReplication>
</ns0:Message1>
</ns0:Messages>
And the output that the third party expects is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE item_dl SYSTEM "http://localhost/dtd/item_dl.dtd">
<item_dl><item><itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a></itm_udef_a>
<itm_udef_b></itm_udef_b>
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d></itm_udef_d>
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
Observe the first two lines of the second output.
I tried to generate the second xml using a java mapping. and it is working fine when i test it in the Interface mapping's test tab. but it is not working when i test the scenario end to end. It is giving some runtime error.
is it possible to change the namespace, etc in the output of the XML coming out of XI? if v change those namespace stuff, does XI recongnise the message and send it to the appropriate reciever?
Please suggest me any solution.
any help wud b greatly appreciated.The first XML is a Split msg XML..Where there are multiple messages within a single XML document..Thats why u have a <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Tags..
Recheck what ur target system needs are & change ur mapping in XI. -
Is it possible to change file name policy in the JRE cache folder?
We are getting calls from our clients complaining of slowdowns in loading our Java applet. The reason is a virusscanner. If a virusscanner is in the middle, it can drastically slow down the download process, and therefore cause some high delay before the user can work on the our product as expected.
On this csutomer's side, it may take up to 10 min (the first time it is ran) instead of 1 min. JRE 1.6 is in use.
They dont want to exclude from antivirus scan all files from Sun\Java\Deployment\cache folder.
Question:
Is it possible to change file name policy in the JRE cache to make it less unique?
Thanks,
-Dimadgomel wrote:
We are getting calls from our clients complaining of slowdowns in loading our Java applet. The reason is a virusscanner. If a virusscanner is in the middle, it can drastically slow down the download process, and therefore cause some high delay before the user can work on the our product as expected.
On this csutomer's side, it may take up to 10 min (the first time it is ran) instead of 1 min. JRE 1.6 is in use.
They dont want to exclude from antivirus scan all files from Sun\Java\Deployment\cache folder.
Question:
Is it possible to change file name policy in the JRE cache to make it less unique?
I suggest you solve the real problem - big files.
There are two scenarios
1. Initial download
2. Updates.
The first takes as long as it takes. No way around it.
The second means that you can't use one jar. Otherwise every single update requires downloading the entire application every time. Multiple jars means only the one that changed is downloaded. -
Is it possible to change schema or name of locally built provider in portal
Is it possible to change schema or name of locally built provider in portal 9.0.4?
We have built an application as a pagegroup and locally built provider in Oracle portal. We can deploy the application to different portals using transport sets. However, it is not possible to install the same provider twice to a shared portal because a provider's name and schema cannot be changed. Does anyone know of a way to rename and change the schema of locally built providers? I was once told that substition strings at import would be available in an upcoming release to do that, but I haven't seen anything like that.
Thanks,
TrentonMaybe use a MHT archive.
*Mozilla Archive Format: https://addons.mozilla.org/firefox/addon/mozilla-archive-format/
*UnMHT: https://addons.mozilla.org/firefox/addon/unmht/ -
Is It POSSIBLE to change the Technical Name of Z-version Query
Hi Friends ,
I was changed all quereis and cube from standard version to Z version.
For queries, by using rszc , i was changed to Zversion,Now again is it
possible to change the Technical Name of Zversion Query ?
If possible , can you please tell me the process ?Hi Hameed,
This may be the reason you are getting an error.
The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
It's better to approach the Bex Query designer.
Hope you understood..
Check the link below for more information:
Re: How to copy query elements without Bex
http://www.bi-expertonline.com/article.cfm?session=&id=2055
Re: copy queries + variants + workbooks -- RSZC ?
Regards,
Ravi Kanth
Edited by: Ravi kanth on Jun 10, 2009 10:03 AM -
Is it possible to change the genre name...
Can I change the name of the genre for an artist without changing the genre on every single song? Is it possible to change the genre name for all songs by an artist by just typing in the new genre for that artist just once?
Ted,
Yes and no.
You can select all the tracks you wish to change the Genre of and change them all at once. Then choose File>Get Info or type command-i.
You'll be warned that are about to edit information for multiple items.
Click OK. Then make you Genre change.
Just remember any field you change will be changed in all the selected items.
Matt -
Is it possible to change domain name
OS: SuSE Linux Enterprise Server 8
Oracle Version: 10.1.0.2.0
I have Oracle Database installed on SLES 8.
Is it possible to change domain name after database is running?
(Not in live production yet)
If yes where I need to make changes?
Regards,
Dfor the database, the dns domain is of no interrest. the parameter db_domain could be change dynamically, but it does not have to match the dns domain. In your sqlnet.ora, you can also define NAMES.DEFAULT_DOMAIN and the domain name in tnsnames.ora. But it does not have to match the dns domain.
HTH
Laurent -
Possible to change the name of shared folders?
I deleted the original shared public folder that looks like "User's Public Folder". When I went to add the Public Folder back it ends up being shared with the name "Public". Is it possible to change this name to something more descriptive? I have several Public folders being shared (several accounts on the computer) and having them all shared as Public makes it a bit hard to determine which account's Public folder you are looking at. Does anyone know how to change the name?
Okay, after some searching around, I figured it out. Primarily I got most of it from here: http://discussions.apple.com/message.jspa?messageID=6266526 , but I added something else to make it work better. The linked post mentioned that they got it to work so you can see "username's Public Folder" when someone file shared from another Mac, but in the Sharing Preference, it would still read as "Public". Well I managed to figure out how to fix that too. Bare with me.
1) Make sure the Public folder in question is set up to be shared in the Sharing Preferences
2) Go to System Preferences > Accounts
3) Control Click the username in question and click Advance Options.
4) Copy the data (the bunch of numbers & letters) from the UUID field. (you'll need it for later, save it to a txt file temporarily, you'll be overwriting your clipboard later)
5) Close System Preferences
6) From the Finder Menu click "Go" > "Go to Folder..." and enter this /var/db/dslocal/nodes
7) Then do a "Get Info" on the "Default" folder and allow EVERYONE read+write access
8) Do the same for the the following two folders, CONFIG and SHAREPOINTS
9) "Get Info" on the "Public.plist" file and allow EVERYONE read+write access (BACKUP THIS FILE)
10) Rename the "Public.plist" to "Username's Public Folder.plist"
11) Open the file in a text editor and change every instance of "Public" with "username's Public Folder" (except for <string>/Users/USERNAME/Public</string>. Thats the actual folder location you don't want to change that.
12) Now what you need to enter this
<key>sharepointaccountuuid</key>
<array>
<string>NUMBER</string>
</array>
It goes between <key>name</key> & <key>sharepointgroupid</key> sections. It should look like the following:
</array>
<key>name</key>
<array>
<string>Username's Public Folder</string>
</array>
<key>sharepointaccountuuid</key>
<array>
<string>NUMBER</string>
</array>
<key>sharepointgroupid</key>
13) Now Paste the UUID number you got before where I have NUMBER written above. Make sure the line spaces and indents match the other entries on the file.
14) Save the file and change the permissions to your new "Username's Public Folder.plist" and the other folders you changed back to EVERYONE "no access".
15) Now the link said to restart File Sharing. I decided to reboot for good measure.
Once done you should see "Username's Public Folder" in the Sharing Preferences and when other Macs try to file share.
Works perfectly for me, and I hope that works for you too! -
Is it possible to change the name of a report thanks to the report painter
Hello,
Is it possible to change the name of a report thanks to the report painter GRR2?
Thanks!
SBHi,
First of all, it's possible to change a report description(title), if that what's you mean. If you want to change a code(name), then indeed you have to copy your report under a new name. To delete the report, first delete it from the report group (via GR52) and then you will be able to delete it.
Regards,
Eli -
Is It Possible To Change The Name Of My Ipod
Under the Summary tab when iTunes opens, it shows the name of my Ipod. Is it possible to change this name as it shows my name before I got married recently?
Connect your iPod to your computer, when it appears in the iTunes source list click on it's name once to highlight it.
Click on it's its name again.
The text box will open for editing.
Type a new name.
Have a look here for more: How To Rename your iPod
Maybe you are looking for
-
I was able to export addresses to webmail @ sonic.net (csv format via previous gmail user) and read them fine using my normal browser, Safari. However, when trying to use the imported addresses via Firefox, the addresses had a symbol inbetween each l
-
Error while deploying BAM Definition
Hi, I am getting below error while deploying BAM Definition: Initially BAM was not configured properly on my machine. But now it looks like configured properly. In the Application LOG I am getting below error: Microsoft.BizTalk.Bam.Management.BamMana
-
ACR Plugins not working and Bridge won't view cr2 files
Hey there.. I've been using Photoshop/Bridge/ ACR for 7 years now but from memory I have had this issue before when installing. My laptop just got a new hard drive and fan and I've had to reinstall everything. I downloaded 3 different ACR plugins and
-
How to start page number in footer lower down
I'm creating an inventory catalog and I need to have all the pages numbered. I know how to insert the page numbers using the master pages, but they always start right at page 1. The first 8 pages are going to be a table of contents and need their own
-
I Need Your Help With My IPod Touch 4 I Would Like To Have Music To Listen To&I Would Like To Know How To Get Internet For My Apple IPod Touch 4 So I Can Have Music To Listen To.Thank You,Donna Spinner