"Possible precedence issue with control flow operator"

Hi guys
I have following Problem:
Yesterday I made a distribution update from debian wheezy to debian jessie.
Since then I got a problem with a plugin which I'm using for Icinga a monitoring system.
When I run it, I got the error that there is an "Undefined subroutine".
I read on google that I can fix it, with reinstalling the vsphere SDK, but the installation stuck at "CPAN is downloading and installing pre-requisite Perl module "SOAP::Lite"".
I can skip this step with Ctrl+C and at the end it says "This installer has successfully installed...".
But when I run the Plugin I get the error message "Possible precedence issue with control flow operator at /usr/share/perl/5.20/VMware/VICommon.pm line 2147." and the whole plugin stucks.
I tried the following step which I found in this forum and the error message doesn't appear, but the plugin still stucks...
Re: VMware-vSphere-Perl-SDK-5.5.0-1384587 broken with perl 5.20
I have also Perl 5.20.2...
Can you guys help me?
Vinzenz

Ok I could fix it...
I changed the line 2147 to
return (defined $user_agent->cookie_jar and
$user_agent->cookie_jar->as_string ne '');
And this time I waited for a long time and I get a error message that there is a problem with SOAP.
The solution was to downgrade Net-HTTP and libwww-perl with following commands:
perl -MCPAN -e shell
o conf urllist push http://backpan.perl.org
install GAAS/Net-HTTP-6.03.tar.gz
install GAAS/libwww-perl-6.03-tar.gz
The second Command loads older releases to the urllist.
Thx for your help and I hope I could help others with the same problem.
Vinzenz

Similar Messages

[stow] perl problem: Possible precedence issue

Hi there,
It came with the last perl update that I am no longer able to run stow.
I already reinstalled the package but it still fails with the following error:
Possible precedence issue with control flow operator at /usr/lib/perl5/vendor_perl/Stow.pm line 1736.
Does someone know how to fix this issue?
Thank you!

It looks like it's just a warning that doesn't actually affect how it runs. Anyway, I know almost nothing about Perl, but this patch silences the warning:
diff -x config.log -x config.status -ru lib/Stow.pm.in lib/Stow.pm.in
--- lib/Stow.pm.in 2012-02-18 20:33:34.000000000 +0000
+++ lib/Stow.pm.in 2014-06-08 22:46:03.420893651 +0100
@@ -1732,7 +1732,7 @@
elsif (-l $path) {
debug(4, " read_a_link($path): real link");
- return readlink $path
+ (return readlink $path)
or error("Could not read link: $path");
internal_error("read_a_link() passed a non link path: $path\n");
Last edited by jakobcreutzfeldt (2014-06-09 09:27:20)

Possible GPU Issues With Camera Raw 6.6

Over the past day on my Windows 7 x64 workstation I've done some updates. Specifically:
The Adobe updater brought in Camera Raw 6.6, replacing 6.5.
I updated the to the ATI Catalyst 11.12 display driver version from previous version 11.11.
I allowed Windows Update to apply the dozen or so changes that were pending.
I was just doing some OpenGL testing with Photoshop CS5 12.0.4 x64 and I noticed that under some conditions I saw Photoshop drop out of OpenGL acceleration. Specifically, when I opened a Canon 5D Mark II image through Camera Raw I saw subsequent operations stop using OpenGL acceleration even though the checkmark remained in the [ ] Enable OpenGL Drawing box in Edit - Preferences - Performance.
What I did to determine whether OpenGL acceleration was enabled was this: Select the Zoom Tool, then click and hold the left mouse button on the image. When OpenGL is enabled, I see a smooth increase in zoom. When it goes disabled, I see only a jump in zoom level after letting up the mouse button. Also, the [ ] Scrubby Zoom box gets grayed out. As I mentioned, even in this condition, a check of Edit - Preferences - Performance still shows OpenGL enabled.
Just as a control, I saved the converted file as a PSD, and every time I opened THAT file (with a fresh copy of PS CS5 running) and did the same operations I could not reproduce the failure. The difference being I did not run Camera Raw.
Since I wasn't specifically looking for issues with Camera Raw, I am not sure that the problem occurred every time I did run Camera Raw. I do know that when I open images from my own camera (40D; I do not own a 5D Mark II) that the problem doesn't seem to occur. Notably I always open my image from Camera Raw to the largest possible pixel size - 6144 x 4096, as I did with the 5D Mark II image, so it's not an obvious size difference that's leading to the issue. Given other comments of late, I'm wondering if it could be a specific issue with conversions of files from 5D Mark II.
Nor am I sure whether any of the above updates caused it - it might done this before; I don't regularly convert 5D Mark II images. I DO think I would have noticed Photoshop reverting to GDI operation before, since I just noticed it pretty easily, but I'm not completely sure of that either. I do use OpenGL-specific features (such as right-click brush sizing) pretty often.
I'm trying now to find a set of steps with which to reliably reproduce the problem now, and will advise.
-Noel

Figures. Now I can't reproduce the problem at all, even after an hour of testing. It probably had nothing to do with Camera Raw.
I wonder if there are latent GPU status indicators and config values stored by Photoshop based on its specific environment that might not be right for the first run (or first few runs) after a display driver update. Hm....
-Noel

Having issues with Flash in Opera

I have been having issues getting videos to work in my browser. I use Opera and it will not load anything Flash related. It gives me an error telling me to install the latest version of flash despite the fact that i have the latest version. If i load IE it loads videos with no issues. I have tried searching to find an answer to this issue with no succes. Seems like it may be a problem with Opera but i cant find anything related. I run AVG antivirus and the scan is clean. I also ran Malwarebytes which came up clean as well so i dont believe it to be a virus or anything of the sort. Any help would be appreciated.

Download flash plugin for Opera:
http://www.adobe.com/go/full_flashplayer_win

Possible DNS issue with AirPort Express basestation?

Hi all -
Up until recently my Airport Express has been working great. This past weekend I started noticing that website browsing became slow, and some websites would not come up at all (e.g. popular sites like wordpress.org).
Otherwise my internet connection works fine (email works, browsing for the most part is normal for all computers on the network, pc and mac).
I read that this could be a possible DNS issue. I unplugged the AE basestation and plugged my Powerbook directly into my cable modem and was able to get to all websites that I couldn't get to while using the AE. That, and browsing was a heck of a lot faster (it seemed).
Can anyone help me out and point me to a specific setting on the AE that I can toggle, correct, whatever, to solve this (possible) DNS issue?
Thanks!
Jeff

Dear Henry, Thanks for your reply, and we are sorry for having intruded upon the wrong thread with our troubles. Perhaps you could point us to the most pertinent thread. Further pushing credulity Might you assist us further?... We have checked every floor in the building and no new equip has been added, though I can't speculate on the 'hood at large. We added a Time Capsule to the mix hoping that might bring back some stability and speed, but results aren't very promising so far. perhaps you might point us to a resource for professional help, or web sites that may help us define and implement something beyond the ad hoc system we have currently. We have read through the Apple docs regarding Designing Networks, and though informative they don't necessarily explain the nuances / consequences of different configurations, for instance, that WDS will adversely affect net speed. Thanks in advance for your input (should you wish to assist). If you are so inclined I can provide the snap shot of our list of hardware. And again apologies if we are in the wrong place.

Possibly why issues with Apple TV & iTunes...

Over the past 24 hours I have had terrible trouble with my Apple TV & iTunes setup - I've never had any issues until now so you can imagine I hit these forums looking for an answer pretty much right away.
I've got an Apple TV 2.0 (160gb) & Mac Mini (Intel Core Duo) running 10.5.2 connected over wifi using an Airport Extreme Base Station.
I've got iTunes 7.6.2 and didn't have a problem when running 7.6.0...
The AEBS is NOT setup for 802.11n as my Mac Mini only supports 802.11g. I have therefore got it setup for g-only (so no issues with wide channels etc on 802.11n).
I started using playlists last week to sync tv shows and movies (my kids always watch the same movies and tv shows over and over so it is the best way to keep these shows on the apple TV and add new content as and when I like).
Everything was working just fine until I added a couple of tv shows yesterday - then the apple TV decided to not play well with iTunes....or rather iTunes kept dropping the Apple TV and would not see it again until restarting iTunes.
Through a tortuous process of elimination I think I may have found the solution to my problem...
Here is what I have done so far :
1 - Reset my Apple TV back to factory defaults (v1.1) - iTunes still drops the connection to the Apple TV when syncing
Note: At this point I should have realised it's an iTunes problem and not the Apple TV, however I ploughed on...
2 - Upgraded Apple TV to 2.0 - still no joy with syncing the tv/movies playlists
3 - Sync'd just photos and music to the Apple TV overnight - no problem
4 - Sync'd one movie (no playlist) this morning - no problem
5 - Sync'd one set of kids TV shows (no playlist) - no problem
I checked the console at steps 1 & 2 above and found iTunes complaining about "can't read data length" when it drops the Apple TV.
So to cut this long story short - the problems I am seeing are likely a corrupt file or a corrupt playlist.
YMMV of course!
Kind regards,
Alex.

Hello SamiD77,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple TV: Syncing time and streaming performance dependent on the speed of wireless network
http://support.apple.com/kb/TA24640
Best of luck,
Mario

IDVD (possibly iLife) issues with Snow Leopard

So I've been trying to create a wedding dvd from a video that I recorded for them. I've done this before (on Leopard) and everything worked fine. Since upgrading to Snow Leopard (including a fresh install) this doesn't seem to work.
Basically iDVD wouldn't launch completely. It would let me select 'create a new project' and then load the themes but the project screen wouldn't open. When I'd go to the file menu and open/close etc the main screen would pop up asking me to cancel, save or don't save the current project. Regardless of which option I chose, the program would freeze and I would have to force quit.
This was on top of issues with iMovie in which I couldn't select the transitions options without iMovie crashing.
Now having searched the internet high and low for solutions, it seems quite a lot of people are having issues with this and I think I know why. Those people having issues seem to be the ones who have iLife on their Tiger setup cd's that came with their macbook/desktop.
Now just so you know I have done all the selected solutions such as removing the preference file from library, repairing disk permissions, reinstalling iLife, reinstalling iDVD without the rest of the bundled software. I even went to the extremes of formatting my hard drive and installing Snow Leopard from scratch and this didn't work. So I thought I'd try upgrading to Snow Leopard from Leopard, again the same issue arose.
It got to the stage where I actually ended up going back to Tiger (10.4) and finishing the dvd and burning it. Now with iDVD and iMovie working fine I decided to upgrade back to Snow Leopard, and low and behold, iDVD isn't working.
I really hope Apple are aware of the issue because it seems to be an problem with people installing the bundled software which came with their macbook/desktop on a version of Leopard/Snow Leopard and it not working.
I'm going to take my macbook into the store soon/and or call Apple Care and request a new install disk of iLife to try and eliminate the issues because when I'm creating a movie, I don't expect to have to roll back to 2 previous OSX version's before my software works.
If anyone has any suggestions, please fire them my way.

While 7.0.4 may work fine with your version of 10.6.2, it doesn't work for others. You'll notice quite a few posts in this section of users with the same error.
The only issue I can assume, as mentioned in the original post, is users who are installing iLife from the original installation CD's provided when I bought my Macbook (which came preinstalled with Tiger). The iLife software comes bundled on two cd's, which I and other users install from. Hence it's the only thing the users who are installing and having issues with have in common.
I could understand if it was only me having issues and if these issues resolved themselves from a fresh, clean install after a reformat, but that's not the case.
I'll call Apple Care tomorrow and see what they think.

Possible Security issue with .zip files

I found a potential issue with expanding .zip files. In the cases I've seen, the .zip files were created on Windows using Winzip. After copying the files to my OS X system, I double-clicked the file to expand the files and folders. (In this case the zip files was a Ruby on Rails web application.) In looking at the files in the terminal, all the files had wide open permission - 777 - all users had full access to all files!
I had to go through and reset the permissions (755 for folders, 644 for files), and had to reset the execute permission on the Ruby script files.
I'm going to test some more with more zip files, but this could be a potentially huge problem.
Also, I noticed that the files had the "extended attribute" of com.apple.quarantine set on each file - which I assume is being set as a function of being downloaded via Safari from my webmail (Gmail) account. The .zip file had this attribute set, and when expanded it propagated to each file and folder.

The files don't have any security on them from windows - windows doesn't know anything about unix permissions.
I've compressed other files and folders on Windows and decompressed them in Tiger without a problem. I would think, at a minimum, the files would inherit the permissions of the parent folder I expanded them into.

IOS 7.0.2 update issue with Control Center

After updating, the iTunes controls no longer work in Control Center. I've already tried rebooting with no changes. Anyone else having this issue?

Ok, well, after a few more reboots and it finaly started to respond. Wierd.

How can I resolve as possible security issue with unauthorized computers through QuickTime , as a diagnostic and screen shots show evidence of a Mac computer and I don't have one?

II'm trying to resolve an issue that I have with my iPhone 4s through QuickTime. I think it might be an embedded mms that might broadcasts my info as well as allows remote access sometimes. Any answers or similar activity?, I can support with screenshots of public information . This shows in my emIl accounts as well.

Is your phone jailbroken? If it is not, you're probably not seeing what you think you're seeing. If your phone hasn't been jailbroken, it's certainly not being controlled remotely. What do you mean by an "embedded mms"? Are you sharing an Apple ID with anyone? Or could someone have gotten access to your Apple ID information?

Issue with BAPI_ALM_ORDER_MAINTAIN for Operation creation in Production ord

Hi All,
I'm trying to use BAPI_ALM_ORDER_MAINTAIN to add missing workcenter in production order. Its resulting in dump.
Following is the data I'm providing:
IT_METHODS
REFNUMBER = 000001
OBJECTTYPE = OPERATION
METHOD = CREATE
OBJECTKEY = order number + VORNR (op no. which I want to add)
IT_HEADER
ORDERID = order number
IT_OPERATION
All data relevant to the to be added workcenter
When I execute, exception NOT FOUND is getting raised.
Details of exceptiion:
'Exception condition "NOT_FOUND" raised.'
Function Module : CO_BT_AFVG_READ_WITH_LOGKEY
Has anyone faced similar scenarios ? How do I fix this issue.
Regards,
Shiva
Edited by: Shivanand Patil on Sep 9, 2009 2:29 PM

Hi,
I'm getting a short dump generated with NOT_FOUND exception being raised. I got one Sap Note 599388 which has the same description as the issue i'm facing. But this note applies to 4.6c version and we are already on ECC 5.0 , so all the changes of this note are already applied. But still i'm getting the same problem.
Does anyone figure out the solution ?
Regards,
Shiva

Issue with step "Installing Operating System"

Hello,
Just wondering if anyone can help me as I've been pulling my hair out for a week over this one. I had my task sequences working fine a couple weeks back and now they fail with this error:
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Task sequence execution failed with error code 80004005
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
I've googled around and tried a lot of 'fixes' I've found from various sites but nothing seems to have remedied this issue. The only thing that changed (That I can think of) is the IP of the VM was changed to a different one. This seems to be when it started
failing. All steps leading up to this point seem to work fine. Does anyone have any sugggestions? This is on a newly built, Hyper-v, server 2012 R2, MDT 2013 setup.
Much Appreciated..!

It would be helpful to get the bdd.log files to debug the issue.
Can you upload them to a public site like onedrive and share the link here?
How to find the right MDT log files (bdd.log/smsts.log) to debug
problems.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Possible compatiblity issues with 875 Neo...

Just noticed something strange...
I'm currently using an ATI 9700 pro card,which is one of the first revisions,since i purchased it last september(Rev 1.2),and while i installed the latest drivers for it,which were released just today(CAT 3.5's),the system was crashing to the desktop left and right on any game,regardless if it was opengl or Direct 3D,sometimes the system just completely froze altogether,forcing a hard reboot ....
After quite a few restarts and making sure that the driver was properly installed,i disabled AGP 8x and fastwrites, using ATI's smartgart uitility and the problems completely vanished....
Thing is,i was using AGP 8x with the 9700 pro when the board was still running bios 1.4 without any issues(fastwrites was still disabled though),so is it possible for MSI to check it out themselves...

Quote
Originally posted by NovJoe
Hi shadow boxer,
Upgrading to the latest drivers/firmwares does not means that it\'ll really be compatible to all mobo\'s versions... and all BIOS upgrades does not stands that it will be the most stable or compatible BIOS...
This is what I did always when I want to find out whether 2 or more drivers/firmwares/BIOS work as unite... I\'ll have to test them in sets... i.e 1.4 BIOS to 3.5 Catalyst > 1.4 BIOS to previous versions of catalyst > 1.5 BIOS to 3.5 catalyst > 1.5 BIOS to previous catalyst.
This may seems tedious but this is one of the ways to get things tested and confirmed that they run smoothly if you wan to upgrade BIOS/drivers etc...
Be warned that if you flash your BIOS incorrectly, there\'s a high risk of mobo failure.
All the Best... :D!!!
Did further testing,and the problem is repeatable....
At AGP 8x settings,any game will either lock up hard,forcing a reboot,or the screen will go blank while the game sound keeps going,all in the first 30 sec to 2 min of starting the game,regardless if it's a direct 3d or opengl game...
At AGP 4x,everything runs smoothly for hours on end,so it's definately something between the 9700 pro and the latest bios for the board as far as AGP 8x compatibility goes...
I know that there's no performance difference between AGP 8x and 4X,but still,i know that the card can run with AGP 8x just fine,because it did with bios 1.2~1.4,so would it be possible for you to report this back to MSI,thanks... 8)

Issue with control cycle

Hello all,
Can somebody please tell me how to find who created a particular control cycle?
Is there a way to find the id of the person who created/modified a control cycle?
If yes, please tell me.
Thanks and Regards,
Umakanth.

Hi
Use Transaction AUT10 with T-codes PK01/PK02.
Give the period for which you want to find changes.
keep the changed by field open , i.e dont put your user id there.
and execute, you will get list of all changes done through creation or chage transaction of control cycle.
check it out and revert back for further discussion.
Hope it helps you.
regards
Ritesh

Custom tag lib issue with task flow in portal

Dear Experts,
I am facing an issue and need your guidance
I have a ADF task flow which is consumed in portal. My task flow uses a custom tag library.
When I run the task flow on portal I am facing following issue:
Caused by: oracle.jsp.parse.JspParseException:
Error: Encountered deferred syntax #{ in template text. If intended as a literal, escape it or set directive deferredSyntaxAllowedAsLiteral
at oracle.jsp.parse.JspParseTagXMLTextContainer.processAttributeForELFunctions(JspParseTagXMLTextContainer.java:118)
at oracle.jsp.parse.JspParseTagXMLTextContainer.processAttributeValue(JspParseTagXMLTextContainer.java:103)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1565)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:886)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.OpenJspTagHandler.parseXMLSrcBody(OpenJspTagHandler.java:782)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.OpenJspTagHandler.parse(OpenJspTagHandler.java:846)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:923)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.OpenJspTagHandler.parseXMLSrcBody(OpenJspTagHandler.java:782)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.OpenJspTagHandler.parse(OpenJspTagHandler.java:846)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:923)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.OpenJspTagHandler.parseXMLSrcBody(OpenJspTagHandler.java:782)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.OpenJspTagHandler.parse(OpenJspTagHandler.java:846)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:923)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTagFile.parseXMLSrc(JspParseTagFile.java:341)
at oracle.jsp.parse.JspParseTagFile.parse(JspParseTagFile.java:256)
at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:439)
at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
... 120 more
<XmlErrorHandler> <handleError> ADF_FACES-60096:Server Exception during PPR, #1

Hi,
Make sure you have the JSTL tag library selected in you deployment plan. Go to Project Properties->Deployments->your_deployment_profile->WWB-INF/Lib Contributors and check JSTL.
Let me know if this worked for you!
Regards,
Mihai

"Possible precedence issue with control flow operator"

Similar Messages

Maybe you are looking for