Possible reasons for a repository manager not displayed under KM Content

Hi,
I developed a repository manager and deployed the par file Archive uploader.
Most time after deployment, I can see immediately an instance of the repository manager under KM Content. However, sometimes, when I made some changes to the code, it doesn't appear under KM Content. The deployment log in SYS/global/config/cm/reports shows no error.
I tried to find some log in System Administration - Monitor, but found nothing.
So, could anyone tell me:
1. What might be the reason for the problem that the repository manager cannot display under KM Content after deploying the par?
2. Where can I find the log explaining why my repository manager cannot display?
Thanks,
Ray

Hi Ray,
Deploying a repository manager means a hot KM deployment, which isn't supported at all, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb1f18be-0801-0010-ffa0-e3495f7401bc and SAP note 894884. After such a deployment, the KM is restarted, but you have some kind of "shadow KM" in memory, which leads for most things to an unpredictable behaviour.
In contrast to the documents reffered to above, also the standard KM delivery from SAP still behaves in an uncontrolled way for many issues.
That's why after a KM hot deployment, you should restart your server if you realize anything "unusual". A workaround is to debug your code and using the hot code replacement feature (which only works in some situations, but that's better than nothing...).
Hope it helps
Detlev

Similar Messages

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

CM Repository created in fsdb mode does not displaying in KM Content

Dear KMC friends
CM Repository created in fsdb mode does not displaying in KM Content.
Any extra confiugration i need to do?
plz reply me
kantha

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
Message was edited by:
Hadar Morchi

I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...

I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...
I dont have any contact detail of that person whom i had bought this phone..

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Safari will not display some media content despite Flip4mac loaded

As the subject indicates, Safari will no longer display some media content after installing Flip4mac. Where that media content would normally display all I see is a square with the Quicktime logo in the middle and a question mark in the middle. For example see the Dakar Rally site http://www.raid-live.com/dakar/en/index.shtml#. In my case Safari does not display the Flash content relating to "Premium Offers".
Mozilla displays everything fine though I don't particularly want to move between browsers depending on the on-line content. I'd rather not use Mozilla as in some cases the page appearances aren't as neat as those displayed by Safari.
Is there a way of restoring Safari back to its default settings in order get it to play ball.
Cheers
Chris

Also a possible explanation is Safari cache files. Safari can be quite stubborn about holding on to these and refusing to let go of a cache file for a page, not showing up-dated content. Since the new user account didn't have any cache files Safari displayed the file correctly there, and used a "bad" cache file in your original account. Even clicking reload doesn't necessarily force Safari to take a new look at the page code. Drives me batty sometimes. If that is the problem you can go to the Safari menu item, choose Empty Cache and try again. I'v had instances though where I had to empty the caches and quit and relaunch Safari to get it to display a page properly.
Another thing to do, to make sure something is a Safari specific problem rather than a system problem, is to download Firefox and try it with a funky page. If the page works in Firefox, but not Safari, you know it is Safari being funny and not your system.
My truck was running rough the other day when I moved it to wash it. Was not looking forward to using it to haul stuff the next day, but when I started it then it worked just fine....
Francine
Francine
Schwieder

.nef files not displayed in my content window!

.nef files not displayed in my content window. I just want to work, not screw around fixing thing. How come the .nef files won't display anymore? The new .nef files don't display.
Thanks for your help.
--max

Well, I'm afraid I'm not going to be a lot of help. From what I see, if everything is installed correctly it should be working. I know that there has been a few challenges associated with Vista, but I don't know enough about that aspect to really comment. I'm still using Windows XP.
As far as Camera Raw is concerned, there have been four updates since CS3 was released. If you haven't done any updates you are probably in for a pleasant surprise. New controls have been added that most people have found to be quite valuable. The most current version of Camera Raw is 4.3.1. The first thing I would suggest is for you to download that update and get it installed and see it that makes a difference.
I know you indicated that you don't want to have to do a lot of fine tuning of the program. But Adobe Camera Raw (ACR) is updated frequently, and you always want to make sure you have the most current version. If the new version of ACR doesn't resolve your issues the problem "might" be related to Vista. And I'm afraid I cannot help you with that at all.

Graph not displayed under Target- dbname- Performance

Performance graph not getting displayed in oem grid control. Here is how I am navigating to the screen: Targets->Databases->dbname->Performance. For some databases that are being monitored, the graph is displayed, for some it is not displayed. Is there any package or procedure that need to be executed to activate the graph.
Thanks.

10.2.0.3 is my grid version. I have 4 databases being monitored and 2 of them have the graph displayed. I am not seeing the graph for the other 2 databases. I went into preferences and checked the status of tuning packs and they are all enabled in the grid control. I am not sure what else to check for?

Help needed: Search function for custom Repository Manager

Hi there,
i'm writing my own Repository Manager for EP 6.0 SP2 PL4.
I've serious problems getting the search function running. I'm using the 'new', Netweaver-based API.
I think, there are some general questions to answer:
- My Repository Manager exposes lots of custom
   properties to the system. I create the properties
   for example using following code:
   IProperty newProp = new StringSingleValueProperty(
     PropertyName.getPropertyName(
              "{}" + myAttName),
     myAttVal,                         PropertyFlags.constructFlags(
              true, false, true, false)
    Is there any convention for the propertie's name?
    I think it has to be written in lowercase only?
    Can I use ANY namespace I want instead of the
    empty default namespace? (For example:
- After indexing my resources (of course, containing my
   custom properties), the TREX-Monitoring screen for my
   index shows all my custom properties in the 'Document
   Properties' area, but all uppercase chars are escaped
   somewhat. Is this OK?
- Trying to use the index above to search for particular
   resources in my repository by my custom properties
   fails all the time ('no docs found...'); searching for
   any system property works fine. What's the reason?
- How can I force the (Property-) search uses my
   custom namespace-manager's methods
   isQueryPropertyNameUnderstood() and
   getQueryBuilder()
   to perform a 'pure' property search by the repository
   manager? It seems that the TREX always handles the
   queries by itself, because my methods are never called.
Thanx for you help,
Daniel

I created a new manager and copied the classes exactly from the "simple" example and I see similar behavior. Actually, when I do this, folders are recursively copied, but not files. Again, browsing and viewing of files work fine. Again, I am not seeing any unexpected exceptions.
The only thing that changed were the names and namespaces. Nothing else at all was changed.
This makes me think I am missing some configuration somewhere or there is something special about the example project that the wizards are not creating. The only difference I see in the project file is an additional nature (com.tssap.selena.cmf.PatternNature), but I am not sure that is relevant.
Wow, I am really stumped.
-Alex

Design Considerations for a Repository Manager in a clustered environment

Hi,
I am currently building a repository manager for a backend document management system. Our portal is installed in a load balanced clusterd environment and we are creating the following functionality in the repostiory manager -
- Browse content
- Read/Write document Metadata
- Upload/download documentation
- Reserve/Unreserve documentation
- Search
How will a clustered environment affect the implementation of the repository manager? Would I need to check for a clustered installation in any kind of way in my code? Currently I do not see why this would be necessary, but i'm not entirely sure and I need this manager to work in a clustered environment.
I could see this as being an issue if we are caching information about the documents in the repository. However, we are not. We will only be caching user information which can be stored separately in a single cache on each server.
Thanks for your help,
Scott

Hi Scott!
There might be two reasons for knowing whether other cluster nodes are running or not and for communicating with them:
- synchronizing access to the backend
- synchronizing caches
If your repository manager must care for serialized access to the backend you will have to synchronize cluster-wide. You don't have to, if your backend can handle parallel access on its own (like a web-server).
If you cache data in your repository and you want to update the caches of the repositories on the other cluster nodes (maybe because you don't get events for changed data from your backend), you must think of sending messages between cluster nodes. You don't have to, if you think that the expiration of your cache entries is shorter than the required timeliness of the data.
Kind Regards, Dirk

Documentum Repository Manager not appearing

Hi,
I am currently trying to set up a Documentum Repository Manager. I downloaded the following components from Documentum:
1. DFC for Windows
2. iViews for Related Content - SAP EP
3. Repository Manager - SAP Portal
I have managed to deploy the components to my SAP EP (NetWeaver 20004s). I can see the documentum iViews listed in the Portal Content folder and the com.documentum.ei.eprm.manager.DCTMRepositoryManager component in the list of Repository Managers.
I created an instance of DCTMRepositoryManager by keying the neccessary configuration information. However, in KM Content, I am unable to see the configured prefix. I tried to look for the prefix in Runtime->RepositoryManagers, but to no avail.
Why would my Documentum Repository not appear? Is there any settings that I have missed? Has anyone managed to get this working in NetWeaver2004s? Any help would be appreciated.
Thank You.
Yours truly.
Message was edited by: Voon Siong Lum

Hi Venkat,
Most of the documentation and installation files for integrating the documentum iViews and the repository manager into the Portal can be found at Documentum's website. You can access the website from http://softwaresupport.emc.com/login/login.asp.
You will need to have an account and login to the site before you can download the relevant items though.
Best of luck to you in trying to integrate documentum.
Yours truly.

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

How to Create a Parameterized Report - The select "- ALL-" for department and manager not working.

I downloaded the OEHR Sample Objects application and followed the steps in Oracle® Application Express Advanced Tutorials
Release 3.2.
The parameters and report seem to be working correctly except when I enter "all" for department or manager I get no matching hits.
What's the most efficient way to retrieve "all" if the users selects all for dept and mgr - thus we'd want to return all records in the table.
Region snipprt
Enter Search
Search Employee
Dept
- ALL -
Administration
Marketing
Purchasing
Human Resources
Shipping
IT
Public Relations
Sales
Executive
Finance
Accounting
Treasury
Corporate Tax
Control And Credit
Shareholder Services
Benefits
Manufacturing
Construction
Contracting
Operations
IT Support
NOC
IT Helpdesk
Government Sales
Retail Sales
Recruiting
Payroll
Mgr
- ALL -
Steven King
Neena Kochhar
Lex De Haan
Alexander Hunold
Nancy Greenberg
Den Raphaely
Matthew Weiss
Adam Fripp
Payam Kaufling
Shanta Vollman
Kevin Mourgos
John Russell
Karen Partners
Alberto Errazuriz
Gerald Cambrault
Eleni Zlotkey
Michael Hartstein
Shelley Higgins
The following is the sql that was provided as part of the turitoral.
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
     (lower(first_name) like '%' || lower(:P1_NAME) || '%' OR
      lower(last_name) like '%' || lower(:P1_NAME) || '%')
AND department_id = decode(:P1_DEPT,'%null%',department_id,:P1_DEPT)
AND manager_id = decode(:P1_MGR,'%null%',manager_id,:P1_MGR)

Hi,
Use this..
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
    (:P1_NAME IS NULL OR
        (:P1_NAME IS NOT NULL AND
                (lower(first_name) like '%' || lower(:P1_NAME) || '%') OR
                (lower(last_name) like '%' || lower(:P1_NAME) || '%')
    ) AND
    (:P1_DEPT IS NULL OR department_id = :P1_DEPT) AND
    (:P1_MGR IS NULL OR manager_id = :P1_MGR)

Why is the left hand window and bar with the buttons for TOC/Search/Glossary not displaying in one client location?

Greetings all:
I have more years of experience with RoboHelp than I want to admit, but I have never run into this before. I have a published RoboHelp 9 project for an overseas client that displays exactly as it should when the published version is viewed by myself or another RoboHelp developer (not located where I am). However; the users at 1 of 2 two client sites do not see the left hand TOC window or the bar above the project with the buttons (the other site does see it). The users at both sites are using Internet Explorer 9, and I have been told there is no difference in their security set-up. I suspect that at the site where it is not displaying there is a security setting that is throwing it off, but I am not sure what to have them look for. Anyone have any ideas?
W. Keith

Do they not simply see the bar or is it empty? In the first situation, it seems they are opening the topic directly instead of via the start file.
What is the URL the users are using on both the locations? And do the users have a hyperlink 'Show' at the top of the topics?
Kind regards,
Willam

Possible reasons for a repository manager not displayed under KM Content

Similar Messages

Maybe you are looking for