Possible solution for all you that have skipping songs, & scratchy sound

Hi All,
After upgrading to 7.02, I was extremely annoyed with the performance. But here's what I found and did. In a nutshell, you uninstall the new version and install a 6.05 version or earlier. I'll include some links to what I found and hopefully it'll help. Here's the first link and it describes what you need to do. Scroll down to the post by marlowe5 posted 10-08-2006, 8:06 A.M. and I also included the exact wording from the post below the link.
http://www.oldapps.com/forum/archive/index.php/t-228.html
This is the exact wording:
Thanks for the advise in this post... after installing iTunes 7, and then 7.01, my computer was running really slow, iTunes was skiping and garbling and acting terribly... so I really needed to go back to 6.05.
For all of you that need to do the same it's pretty easy:
I downloaded the 6.05 install file from from oldapps, uninstalled 7.01 and then re-installed 6.05. When I ran iTunes it did give me the error message that the library file was created in a new version and couldn't open, but I then deleted the 'itunes library.itl' file (in My Music > iTunes folder) and then replaced it with the backup that was automatically created when I installed 7.01 (in My Music > iTunes > Previous iTunes Libraries). iTunes then started up fine with all my music and playlists. And all the skipping and CPU bogging is better now.
Library file note:
With the library file, when you update iTunes it also updates the library file, which won't work with older versions. So you need to replace this file or create a new one. I would recommend copying/backing up the new library file to a different location to be safe instead of just deleting it. You'll see above where to find the new library file and prior ones. When I made these changes I did two things to be safe, 1) I moved the new "iTunes library.itl" to a backup location instead of deleting it 2) I moved my most recent old library file from(My Music > iTunes > Previous iTunes Libraries) to (My Music > iTunes folder)and renamed it to "iTunes library.itl". It was previously "iTunes library 2006-1-18.itl." Before renaming it, iTunes didn't find the library so renaming it worked. Your file name will most likely have a different date so don't look for the exact file I mentioned. Plus it's probably a good idea to make a copy or back up this library file too.
If you don't have any previous library files, you may need to create a new one. I don't have the info but I believe the link to the post should have that info.
After reading through the post and other info, the only thing that it appears might be lost are playlists that have been created since the upgrade. I don't believe any music should be lost but that's why it's safer to backup the new library just in case. I did not lose any music.
Also, here's a link to where I found old versions of iTunes:
http://www.filehippo.com/download_itunes/?1249
Hopefully this helps and good luck. I'm back to normal now.
Dell Dimension 4550 Windows XP
Dell Dimension 4550 Windows XP
Dell Dimension 4550 Windows XP

Soccerteen,
Make sure you try all the other remedies mentioned in other posts. If this didn't work for you then try below. I consider it a last ditch effort since it's going back to a previous version, which unfortunately works much better than 7.0x for me.
Remove & backup your current library file to a different file/location to be safe. Once you do that, uninstall 7.02, and then install 6.05 or any 6 version. Once 6.0x is installed and you've opened it, you'll need to create a new library file. If you've removed the library file from (My Music > iTunes folder)it should load up with a blank slate. What you to do from this point is create a new library file. Read the oldapps link, the post from "Admin" dated 9-30-2006 5:30 PM should help. Most likely all of your music will be under one main file but you might have to add individual folders one at a time depending on how much music you have. Since I didn't have to go this route, I'm not sure if it's the best route but after reading multiple post, this was the most common suggestion. Worst case scenario, you can always reload 7.02 an reinsert the backup library file, which will put you back where you started.
Hope that works for you and good luck!

Similar Messages

Bpel deployment fails for all processes that have revision other than 1.0.

Using: Release *10.1.3.3.1*
Hello All,
Bpel deployment fails for all processes that have revision other than *1.0*.
We have been attempting to deploy several BPEL projects via ANT script to a target environment and are encountering failures to deploy for every project which isn’t a (revision 1.0). We are getting the following error whenever we try to deploy a process with a revision other than 1.0:
D:\TJ_AutoDeploy\BPEL_AutoDeploy_BETA\build.xml:65: BPEL archive doesnt exist in directory "{0}"
     at com.collaxa.cube.ant.taskdefs.DeployRemote.getJarFile(DeployRemote.java:254)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.deployProcess(DeployRemote.java:409)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.execute(DeployRemote.java:211)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
     at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
The structure of our automated deployment script is as follows:
First, a batch script calls (Jdeveloper_BPEL_Prompt.bat) in order to set all necessary environment variables i.e. ORACLE_HOME, BPEL_HOME, ANT_HOME, etc for ant.
Next, the script lists every .jar file within the directory to an .ini file called BPEL_List.ini. Furthermore, BPEL_DIR, ADMIN_USER and ADMIN_PSWD variables are set and initialized respectively to:
-     “.” – point to directory where script is running from because all the BPEL processes are located here
-     “oc4jadmin”
-     “*********” (whatever the password for out environment is)
We’ve developed a method to have the script prompt the user to select the target environment to deploy to. Once the user selects the appropriate environment, the script goes through the BPEL_List.ini files and a loop tells it that for every BPEL process listed:
DO ant
-Dprocess.name=%%b
-Drev= !Rev!
-Dpath=%BPEL_DIR%
-Ddomain=default
-Dadmin.user=%ADMIN_USER%
-Dadmin.password=%ADMIN_PWD%
-Dhttp.hostname=%HOST%
-Dhttp.port=%PORT%
-Dverbose=true
(What’s happening is that the variables in the batch file are being passed on to the ANT script where *%%b* is the process name, !rev! is revision #, and so on…)
The loop goes through each line in the BPEL_List.ini and tokenizes the BPEL process into 3 parts *(%%a, %%b, and %%c)* but we only extract 2 parts: *%%b* (process name) and *%%c* which becomes !Rev! (revision number).
Example:
Sample BPEL process:
bpel_ThisIsProcess1_1.0.jar
bpel_ThisIsProcess2_SOAv2.19.0.001B.jar
After tokenizing:
%%a     %%b     %%c
bpel     ThisIsProcess1     1.0.jar
bpel     ThisIsProcess2     SOAv2.19.0.001B.jar
*!Rev!* and not *%%c* because *%%c* will return whatever the revision number is + the “.jar” file extension as illustrated above. So to circumvent this, we parse *%%c* so that the last 4 characters are stripped. Such is done like this:
set RevN=%%c
set RevN=!RevN:~0,-4!
Hence, the usage of !Rev!.
Below is a screenshot post of the ANT build.xml that goes with our script:


<project name="bpel.deploy" default="deployProcess" basedir=".">
     
     <property name="process.dir" value="${basedir}" />
          
          
     <property environment="env"/>
     
          <condition property="bpel.home" value="${env.BPEL_HOME}">
               <available file="${env.BPEL_HOME}/utilities/ant-orabpel.xml" />
          </condition>
     
     
     
     
     <property name="oracle.home" value="${env.ORACLE_HOME}" />
     <property name="bpel.home" value="${oracle.home}/bpel" />
     
     <property file="${process.dir}/build.properties"/>
     
     <import file="${bpel.home}/utilities/ant-orabpel.xml" />
     
     <property file="${bpel.home}/utilities/ant-orabpel.properties" />
     
     <target name="deployProcess">
          <tstamp>
               <format property="timestamp" pattern="MM-dd-yyyy HH:mm:ss" />
          </tstamp>
          
          <record name="build_verbose.log" loglevel="verbose" append="true" />
          <record name="build_debug.log" loglevel="debug" append="true" />
          <echo></echo>
          <echo>####################################################################</echo>
          <echo>BPEL_AutoDeploy initiated @ ${timestamp}</echo>
          <echo>--------------------------------------------------------------------</echo>
          <echo>Deploying ${process.name} on ${http.hostname} port ${http.port} </echo>
          <echo>--------------------------------------------------------------------</echo>
          <deployProcess
               user="${admin.user}"
               password="${admin.password}"
               domain="${domain}"
               process="${process.name}"
               rev="${rev}"
               dir="${process.dir}/${path}"
               hostname="${http.hostname}"
               httpport="${http.port}"
               verbose="${verbose}" />
          <sleep seconds="30" />
          
     </target>
     
</project>
SUMMARY OF ISSUE AT HAND:
~ Every bpel process w/ 1.0 revision deploys with no problems
~ At first I would get an invalid character error most likely due to the “!” preceding “Rev”, but then I decided to set rev=”false” in the build.xml file. That didn’t work quite well. In another attempt, I decided to leave the –Drev= attribute within the batch script blank. That still led to 1.0s going through. My next thought was deploying something other than a 1.0, such as 1.2 or 2.0 and that’s when I realized that if it wasn’t a 1.0, it refused to go through.
QUESTIONS:
1.     IS THERE A WAY TO HAVE ANT LOOK INTO THE BPEL PROCESS AND PULL THE REVISION ID?
2.     WHAT ARE WE DOING WRONG? ARE WE MISSING ANYTHING?
3.     DID WE GO TOO FAR? MEANING, IS THERE A MUCH EASIER WAY WE OVERLOOKED/FORGOT/OR DON’T KNOW ABOUT THAT EXISTS?
Edited by: 793292 on Jul 28, 2011 12:38 PM

Only thing i can think of is instead of using a MAC ACL , u cud jus use the default class
Policy Map Test
class class-default
police 56000 8000 exceed-action drop
Class Map match-any class-default (id 0)
Match any
You would be saving a MAC-ACL ;-).

For all you who have problems here is the fix for your phone.

Most of you on here don't understand that 3.x or if you have jailbreak your pass software and set it up from back up you are going to have problems. That can be from drop calls to not having the phone working right.
The 4.0 software has been rewritten completed for the new and old phones. So if you were on 3.x and update to 4.0 then you are bring in a bugs into 4.0. You have to set up as NEW PHONE not from back up. This clean your phone with a fresh software then you add your stuff from your computer. Then you have to go to general and go and reset your network settings. That reset your carrier account with the new 4.0. That because the new 4.0 is now looking to find the tower which has the less people on the tower not which tower is close to you. This way you get a better service and sound of it.
If you still have problems all of you with your iPhone 4 then it a hardware problem. You have to go to the Apple store and replace the phone. Apple will be happy to replace the phone. If not you have 30 days to get your full refund from Apple.
That is it. Nothing hard about it. It's a software problem of a hardware problem. BTW my new iPhone 4 is much better in sound and not having any drop calls than my old 3GS. If you have problems with drop calls is because you are in area which has a week tower which is so busy and can't keep up with the system. That a ATT problem which ATT is working hard to fix it but it can't get the equipment from their supplies fast enough to fix the problem with the network.
I hope this answer your problems on here.

I know this sounds like a bit of Voodoo, but it's worth a try. If you've upgraded to the new iPhone 4 and have restored your old software, you may see what appears to be a signal drop-off. Let's stay away from the whole iPhone 4 "death grip" controversy; that aside, no matter what you do, you're not seeing as many bars or getting reception that's as good as what you had with your older iPhone.
Here's something to try. On your iPhone preferences, navigate to "General," and then scroll down to the bottom where it says "Reset." Tap that, and then tap "Reset Network Settings." You'll get a warning, and the phone will reset to factory defaults. You'll likely lose some Wi-Fi passwords, but you may also find that your cellular reception gets a lot better.
I have two friends who tried this, and they went from one or two bars to four or five at the same locations. This is the same trick they are doing at the Genius Bar, and my research shows that it can help in many (but not all) cases. We've talked about this fix before, but we have a lot of new readers, and some old ones, who may have missed it. There are also some discussions about this on the Apple support board. If you have seen a drop-off in reception, it's certainly worth a try. If it doesn't work, we're sorry. If it does, well, the price is right for the fix. Let us know in the comments if it helped, or sadly, if it didn't.

Ultra not booting, reboots on its own, display - possible solution for all.

I had a problem for a few days where my Ultra 24 would stop (the screen would freeze for a sec), the fan would make a lot of noise and the PC would reboot on its owns. Sometimes it would be on a loop or not start up at all.
I perused through these boards and saw other people with similar issues and solutions. (Mine was to take out MB battery and reset bios).
This fixed the problem but it eventually came back at least once a week.
Anyways after calling Sun and spending a lot of time on the phone I determined that this is related to the graphic card. You'll notice that the nvidia driver these workstations come with are really outdated drivers (mine was the quadro nvs 290).
After I updated the driver (05/08) the problem has gone away and graphics perform MUCH better.
I am running running Solaris 10 and XP.
Hope this helps some of you out.
Edited by: Rhuobhe on Jun 24, 2008 1:24 AM
Edited by: Rhuobhe on Jun 24, 2008 1:24 AM

We have a T-Mobile corporate account with several of these 8120's. We have had them since mid-July and now 3 out of 10 of them are having the reboot issue as well. We, however, do not have or use any memory cards in them, so I don't think that is the problem either. We've reinstalled the software (they had the same version as the newest already installed) as tech support has suggested, and still the problem happens. It happens sometimes when the phone is idle, but most of the time they reboot during a conversation. This is quite annoying as they are business phones and it takes 3-5 minutes for the phone to complete the reboot process. Any help on this would be greatly appreciated.
Message Edited by ridbidge on 09-18-2008 03:34 PM

Is there an "Unread Mail" solution for the iPhone that would allow me to see all new Unread mail? I have ove 100 subfolders with rules that redirect mail.

Is there an "Unread Mail" solution for the iPhone that would allow me to see all new Unread mail in one location?
I have an iPhone 4 (not 4S). I use the Outlook client with an Exchange Server on my Desk.
In order to keep email organized, I have many subfolders (over 100) under my Inbox with rules that automatically redirect the bulk of new unread email to the subfolders.
In the Outlook client on the desktop, there is an "Unread Mail" Folder that lets me see ll unread mail in one location whether it be in the main inbox or in one of the subfolders of the inbox.
I would like to see all unread email in one location without me having to change my rules and work flow that I have been using for 7+ years?
It is much more work for me (so far) to see new email on the iPhone. You have to scan each subfolder in order to tell where the new mail is that just arrived.

Is there an "Unread Mail" solution for the iPhone that would allow me to see all new Unread mail in one location?
I have an iPhone 4 (not 4S). I use the Outlook client with an Exchange Server on my Desk.
In order to keep email organized, I have many subfolders (over 100) under my Inbox with rules that automatically redirect the bulk of new unread email to the subfolders.
In the Outlook client on the desktop, there is an "Unread Mail" Folder that lets me see ll unread mail in one location whether it be in the main inbox or in one of the subfolders of the inbox.
I would like to see all unread email in one location without me having to change my rules and work flow that I have been using for 7+ years?
It is much more work for me (so far) to see new email on the iPhone. You have to scan each subfolder in order to tell where the new mail is that just arrived.

Got a question for all you peeps dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i

got a question for all you peeps
dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i tunes says invalid sim i put the correct sim in it used to be locked too and still says same pls any one with ideas?

hi sorry what happoned is that ages ago i brought a i phone 3gs on 02 network i went to a sml phone shop and payed for them to unlock it. it has been fine till yesterday when i went to reset it from the phone it then turned off and came back on just just an image of a apple for about an hour so i connected to i tunes and it said downloading software after another hr it had finished but then i tunes said in had to insert a sim so i had to un plug the phone from laptop while i did this i put my orange sim in and the i phone said where do i live and had to connect to a internet connection but all the time saying no service where the signal bar is and then says activating i phone it took a few min and said couldnt finish it bec of the signal and to connect it to i tunes to do it so i connected it to itunes and i tunes just keeps saying invalid sim so i took my orange sim out and put a 02 sim in and is still saying invalid sim on itunes?

PrintWindow api with possible solution for capture screenshot Google Chrome window

Hi,
as all you know, PrintWindow api give us a black image when us want a capture screenshot of Google Chrome window. So, a friend said me that a possible solution for this problem is:
Reduce Google Chrome window for -1px in both sides and after this, reset to original size. And so, will repaint again.
Based on code below, someone could help me make this? sincerely I don't know where begin.
[DllImport("user32.dll", SetLastError = true)]
static extern IntPtr FindWindow(string lpClassName, string lpWindowName);
[DllImport("user32.dll", SetLastError = true)]
static extern IntPtr FindWindowEx(IntPtr hwndParent, IntPtr hwndChildAfter, string lpszClass, string lpszWindow);
[DllImport("user32.dll")]
private static extern IntPtr GetDC(IntPtr WindowHandle);
[DllImport("user32.dll")]
private static extern void ReleaseDC(IntPtr WindowHandle, IntPtr DC);
[DllImport("user32.dll")]
private static extern IntPtr GetWindowRect(IntPtr WindowHandle, ref Rect rect);
[DllImport("User32.dll", SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
static extern bool PrintWindow(IntPtr hwnd, IntPtr hDC, uint nFlags);
[StructLayout(LayoutKind.Sequential)]
private struct Rect
public int Left;
public int Top;
public int Right;
public int Bottom;
public static Bitmap Capture(IntPtr handle)
Rect rect = new Rect();
GetWindowRect(handle, ref rect);
Bitmap Bmp = new Bitmap(rect.Right - rect.Left, rect.Bottom - rect.Top);
Graphics memoryGraphics = Graphics.FromImage(Bmp);
IntPtr dc = memoryGraphics.GetHdc();
bool success = PrintWindow(handle, dc, 0);
memoryGraphics.ReleaseHdc(dc);
return Bmp;
private void button1_Click(object sender, EventArgs e)
IntPtr WindowHandle = FindWindowEx(IntPtr.Zero, IntPtr.Zero, "Chrome_WidgetWin_1", null);
Bitmap BMP = Capture(WindowHandle);
BMP.Save("C:\\Foo.bmp");
BMP.Dispose();
Any suggestions here is appreciated.

Hello,
I would prefer capture the screen rather than get it from that application directly.
It has been discussed in the following thread.
Is there any way to hide Chrome window and capture a screenshot or convert the Chrome window to image?
In this case, you could remove the line "ShowWindowAsync(mainHandle, 0); " since you don't want to hide it.
using System;
using System.Runtime.InteropServices;
using System.Diagnostics;
using System.Drawing.Imaging;
[DllImport("user32.dll")]
private static extern bool ShowWindowAsync(IntPtr hWnd, int nCmdShow);
[DllImport("user32.dll")]
public static extern bool GetWindowRect(IntPtr hWnd, out RECT lpRect);
[DllImport("user32.dll")]
public static extern bool PrintWindow(IntPtr hWnd, IntPtr hdcBlt, int nFlags);
public WhateverMethod()
//initialize process and get hWnd
Process chrome = Process.Start("chrome.exe","http://www.cnn.com");
//wait for chrome window to open AND page to load (important for process refresh)
//you might need to increase the sleep time for the page to load or monitor the "loading" title on Chrome
System.Threading.Thread.Sleep(4000);
chrome.Refresh();
IntPtr mainHandle = chrome.MainWindowHandle;
RECT rc;
GetWindowRect(mainHandle, out rc);
Bitmap bmp = new Bitmap(rc.Width, rc.Height, PixelFormat.Format32bppArgb);
Graphics gfxBmp = Graphics.FromImage(bmp);
IntPtr hdcBitmap = gfxBmp.GetHdc();
PrintWindow(mainHandle, hdcBitmap, 0);
gfxBmp.ReleaseHdc(hdcBitmap);
gfxBmp.Dispose();
bmp.Save("c:\\temp\\test.png", ImageFormat.Png);
ShowWindowAsync(mainHandle, 0);
[StructLayout(LayoutKind.Sequential)]
public struct RECT
private int _Left;
private int _Top;
private int _Right;
private int _Bottom;
public RECT(RECT Rectangle)
: this(Rectangle.Left, Rectangle.Top, Rectangle.Right, Rectangle.Bottom)
public RECT(int Left, int Top, int Right, int Bottom)
_Left = Left;
_Top = Top;
_Right = Right;
_Bottom = Bottom;
public int X
get { return _Left; }
set { _Left = value; }
public int Y
get { return _Top; }
set { _Top = value; }
public int Left
get { return _Left; }
set { _Left = value; }
public int Top
get { return _Top; }
set { _Top = value; }
public int Right
get { return _Right; }
set { _Right = value; }
public int Bottom
get { return _Bottom; }
set { _Bottom = value; }
public int Height
get { return _Bottom - _Top; }
set { _Bottom = value + _Top; }
public int Width
get { return _Right - _Left; }
set { _Right = value + _Left; }
public Point Location
get { return new Point(Left, Top); }
set
_Left = value.X;
_Top = value.Y;
public Size Size
get { return new Size(Width, Height); }
set
_Right = value.Width + _Left;
_Bottom = value.Height + _Top;
public static implicit operator Rectangle(RECT Rectangle)
return new Rectangle(Rectangle.Left, Rectangle.Top, Rectangle.Width, Rectangle.Height);
public static implicit operator RECT(Rectangle Rectangle)
return new RECT(Rectangle.Left, Rectangle.Top, Rectangle.Right, Rectangle.Bottom);
public static bool operator ==(RECT Rectangle1, RECT Rectangle2)
return Rectangle1.Equals(Rectangle2);
public static bool operator !=(RECT Rectangle1, RECT Rectangle2)
return !Rectangle1.Equals(Rectangle2);
public override string ToString()
return "{ + _Left + "; " + " + _Top + "; Right: " + _Right + "; Bottom: " + _Bottom + "}";
public override int GetHashCode()
return ToString().GetHashCode();
public bool Equals(RECT Rectangle)
return Rectangle.Left == _Left && Rectangle.Top == _Top && Rectangle.Right == _Right && Rectangle.Bottom == _Bottom;
public override bool Equals(object Object)
if (Object is RECT)
return Equals((RECT)Object);
else if (Object is Rectangle)
return Equals(new RECT((Rectangle)Object));
return false;
And the key method used is the one shared in
Get a screenshot of a specific application.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Found a solution for all issues!

Hi all, I just wanted to post my solution for all my problems with my nokia e63 (maling issues, crash issues, browsing issues, etc), yes, there is a simple way to solve them all and I took it, I just got a Blackberry and now everything runs smooth!! YES!, there is light at the end of the tunel, jajajajajaja I'm so happy to finally get over this nightmare, hope you all find your way out of Nokia's blackhole! Good luck

I was able to locate an example that somewhat applies to your application:
https://decibel.ni.com/content/docs/DOC-11632
I simply modified the code to allow for CI and CO tasks, similar to your VI, and it worked fine. I've attatched the modified code below. However, I was unable to run your code without receiving the error you were seeing. Even after I made the VIs identical (leading up to the Start Task VI), I saw different bahavior. The VI that you are working on may have been corrupt. This modified example should be a good starting point.
Applications Engineer
National Instruments
Attachments:
9401NibbleConfig.vi ‏29 KB

How can I set the default home page in Firefox 4 for all users that login to a PC on a Win 7 PC?

I work at a community college in upstate NY.
We use Firefox as the default browser at our institution and we have always set the default homepage to be our homepage for all users that login to the PC. We had a procedure to to that that worked with Windows XP and FF 3 or earlier
We would do the following:
1. go to: c:\Documents and Settings\Administrator\Application Data\Mozilla\FireFox\Profiles\<profile_name>\prefs.js
2. Add the line: user_pref (“browser.startup.homepage”,”http://www.genesee.edu”);
3. Copy the Folder
C:\Documents & Settings\Administrator\Application Data\Mozilla
To
C:\Documents & Settings\Default User\Application Data\Mozilla
4. Restart the computer
We're going to Win 7 and Firefox 4 and things seem to be different in terms of files and file structure. Does anyone know how to accomplish this?
Thanks in advance.

Making customisation from the default profile is generally considered poor practice and quite often doesn't work out as planned. (If you're interested in some more information on this, [http://mockbox.net/windows-7/227-customise-windows-7-default-profile.html see here] see here)
This article should help you with developing and deploying your customised Firefox 4 installation (without touching the Windows 7 default user profile):
http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html

Report in DM module (ISU)for Meter removed that have debts &security charge

I am beginner in SAP ISU, looking forward for solution , I have a techno-functional task- "I need to develope a report in DM module(ISU) for Meter removed that have debts and security charge with generalised Requirement.
Moderator message: please work yourself first on your requirement.
Edited by: Thomas Zloch on Feb 20, 2012

I have just experiences the "beep, beep, beep" after a hard crash.
The computer is overheating. The RAM gets hot and everything crashes.
The system will not restart, all I get is "beep, beep, beep.....beep, beep, beep.....beep, beep, beep.....beep, beep, beep.....beep, beep, beep.....beep, beep, beep.....beep, beep, beep.....beep, beep, beep"
I pulled the ram, and switched the chips around. The system is back up without a problem so far.

How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

I want Change format mask for all fields that type's number
Such as
if :parameter_value = 1 then
all fields format mask = ' 999,999,990.000' ;
else
all fields format mask = ' 999,999,990.00' ;
end if;
Regards

So, i have bad news for you : you'll have to rebuild again.
Meanwhile i have excellent news for you : there's an online tool made by Johannes Henseler called Sidecar xml which builds the necessary xml file for you, sort of what you find in the Digital Publishing Folio Editor website, but saves it in your Folio folder.
Next time you import all your folder (with that file), it will place all the necessary information, and even reorder the articles.
Build once, play many times.

I found a solution for the You Tube problem

For all of you that have had problem seen you tube videos with your Mac Book, finally the problem was solved. Yesterday March 22 Adobe updated its Flash Player. I updated it and the problem was solved.

You should also have the last update Mac OS 10.6.7 and last update of Adobe Reader 9.4.3

How to find all photos that have NO faces, as opposed to UNNAMED faces?

I find that iPhoto often misses faces entirely, especially if the face is wearing sunglasses or a hat or both. Sometimes it is rather inexplicable that it has missed a face, as the face seems obvious.
If you use the smart album method to find all "unnamed" faces, the photos have at least one unnamed face identified. You can then add any missed faces to those photos.
But what about photos in which iPhoto has failed to identify the existence of even one face? Or for that matter, if I want to see only pictures of landscapes or objects that have no people? Does anyone have a method for finding all photos that have no faces in them at all?
For me, the idea is to find all unidentified faces and add them. But as I pointed out above, there may be other uses for this.
Any ideas, anyone?
Thanks

Awesome !!! Thank you very much. I did not realize you could use JavaScript to code against iTunes ...
I don't know if you have written any of these yourself, but do you know how to maybe create a smart playlist with this information via script? If not, no big deal. At least I know have something which I can use, I will just have to run it every so often.
Thanks again for pointing me to that site!

After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Possible solution for all you that have skipping songs, & scratchy sound

Similar Messages

Maybe you are looking for