Possible solution to authorization issues

Recently I had the issue with 8.1.1 where when you try to play a song you bought from iTunes it asks you to authorize your computer. You do and it doesn't matter. De-authing and re-authing does nothing. Deleting the sc shared folder doesn't work. So, I e-mailed iTunes support from the support page and someone responded back to reinstall a new copy of iTunes over the old. I did, rebooted and it works fine now. Just hoping some others can get help out of this.

UPDATE: Okay, so as I mentioned that running kernel 3.10 with ipv6 (and powersaving) disabled it works, it isn't perfect, it loses connection every now and then, doesn't get any usable speeds and it randomly disconnects and requires a reauth, nothing major as it isn't exactly common (ugh, it's a major improvement over disconnects every two seconds)
This card is still awful though (on an unrelated note I still find it hilarious that the card works even worse in windows *rolls eyes* I blame microsoft)

Similar Messages

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees.

A Possible Solution to the Issues with QuickTime + Beloved Question Mark.

This is a possible solution to this issue. I have been doing some thinking about this. I have suggested the answer would come from Apple Computer, through an update of "QuickTime". I looked at the applications using the internet. I highlighted them, did a "Find Info" or Apple/Command-I. I decided to check the "Rossetta" box and in my case, better functionality. One thing, make sure you check all of them. I am not jumping up and down and screaming I have the answer. I am just saying it's a possibility. If you want to go this route, let's talk if we run into problems. This is the purpose of the discussion boards.
Nort

Open QuickTime with Rosetta and the samegoes with Safari.

Solution manager Authorization issue

Dear all,
We are maintaining a enterprise solution manager.
we maintain all our SAP clients issues which is posted in our solution manager.
Now the issue is if the clients login in to our solution manager to see the issue status, they are able to see all the clients issues which is posted.
but we want to restrict the authorization not to see other clients issues which is posted in our solution manager.
we want them to see the issues only which is posted by them.
Please give me if there is set of authorization to do this.
Regards
Prakash

HI,
From ur post, I think u have provided authorization to access the tcode crm_dno_monitor. In that case, u cannot restrict him to see all other messages. If u want to restrict the authorization, create a variant with necessary inputs which shows the result ur customer wants to see and assign that to his favourites. Only provide access to call that variant.
Rajeev.

Possible solution to disconnecting issues with Realtek RTL8188CE

As you may recall I've been having issues with my RTL8188CE WLAN card (and if I recall I'm not the only one), anyway I have found something that solves it for, at least, my system
I introduce to you: Linux Mint Debian Edition, the distro itself is irrelevant but how it sets up networking is very relevant, from what I can tell it uses a so called obsolete method of setting up the network firmware this would be ndiswrapper, from what I can tell it works excellent.
Another thing I noticed is that this card is utter garbage in any OS, it doesn't work right in windows either (making multiplayer games... less than entertaining)
Now, here's the catch: I don't recall how LMDE set it up nor do I have a partition running it right now (sacrificed for a pure debian jessie system (I always keep coming back to debian)), if anyone has this card they could try installing lmde to figure out the network setup it is using (actually, that would be really helpful)
Anyway, that's my two cents to the issue of getting this card working
No seriously, that's all. Now off to get my Debian install and then arch install working with this setup to verify that it can be replicated on other systems. (if possible could anyone try this and post their results, I had four disconnects over the last month, three were my own fault for messing with the driver)
P.S if this is in the wrong section (might be, it seemed like the most relevant one to me though) please don't overreact ^^
EDIT: Update - the card seems to work somewhat reliably with the native linux driver on kernel 3.10 with ipv6 disabled, still not perfect but *usable* (as in haven't disconnected for over an hour)
Now, time to do some more experimenting (the actual stability seems very random depending on kernel version, driver version, position of the moon and whether or not you've successfully located elmo)
Last edited by CubeGod (2013-11-08 14:24:19)

UPDATE: Okay, so as I mentioned that running kernel 3.10 with ipv6 (and powersaving) disabled it works, it isn't perfect, it loses connection every now and then, doesn't get any usable speeds and it randomly disconnects and requires a reauth, nothing major as it isn't exactly common (ugh, it's a major improvement over disconnects every two seconds)
This card is still awful though (on an unrelated note I still find it hilarious that the card works even worse in windows *rolls eyes* I blame microsoft)

Possible Solution to Sync Issues in Windows 7

Hello all,
I have been seeing a lot of discussions about syncing over Wifi atfer the IOS6 update and I may have found a solution for Windows 7x64 at least. Afer a hard drive crash and then having to reinstall Windows I was seeing a few Bonjour errors in the Event Viewer and I couldn't sync my iPhone 4 over Wifi.
I found that I needed to install the Windows SNMP service and then enable it and after that my sync problem disappeared.
So try the following
1. Click on START > RUN and tryp services.msc, this will open up your services window.
2. Scroll down till you see SNMP and SNMP TRAP, make sure both are started and set to Automatic.
3. Now the SNMP service might not be there so if it's not go into the Windows Control Panel and Open "Programs and Features"
4. Select the option to "Turn Windows Features on or off" you''ll see it on the left side panel.
5. Select the check box for Simple Network Management Protocal" (SNMP) and install it.
6. Make sure the SNMP servic eis set to Automatic in the Services Window.
6. Reboot and hopefully you'll be able to sync your device over Wifi again.

Hello all,
I have been seeing a lot of discussions about syncing over Wifi atfer the IOS6 update and I may have found a solution for Windows 7x64 at least. Afer a hard drive crash and then having to reinstall Windows I was seeing a few Bonjour errors in the Event Viewer and I couldn't sync my iPhone 4 over Wifi.
I found that I needed to install the Windows SNMP service and then enable it and after that my sync problem disappeared.
So try the following
1. Click on START > RUN and tryp services.msc, this will open up your services window.
2. Scroll down till you see SNMP and SNMP TRAP, make sure both are started and set to Automatic.
3. Now the SNMP service might not be there so if it's not go into the Windows Control Panel and Open "Programs and Features"
4. Select the option to "Turn Windows Features on or off" you''ll see it on the left side panel.
5. Select the check box for Simple Network Management Protocal" (SNMP) and install it.
6. Make sure the SNMP servic eis set to Automatic in the Services Window.
6. Reboot and hopefully you'll be able to sync your device over Wifi again.

When i paste some copied color text or formatted cells from excel to my mail draft while composing a mail, it is being pasted as plain text. No back groud or text colors are copied to it. Please suggest a possible solution for this issue.

Colors & Formatted Cells from Excel application can not be copied to my mail composer as it is. Only Plain text is copied.

Wish I could be king. But you described the problem perfectly and I am still but a pawn. All I can say is that I trashed the mail preferences (com.apple.mail.plist) on my Mac Mini, and now my MacBook seems to work right.
Sorry. :>) But that is the truth... The MacBook now has actually sometimes displayed pasted text in its actual, different, font and style as I paste it into a partially composed new mail message.
In other (more rational) words, the problem seems to be tied to pasting only certain types of text. I have not been able yet to pinpoint what. Yes, frustrating indeed. The only work-around has been to re-train my fingers to command-option-shift V, for "paste and match style" (like you, I do not want to always use only plain text). Maybe someone else will eventually weigh in with a real solution. The solution I want is just to be able to consistently see any font variations within my message before I send the email.
The info about the different ppi scales between Windows and Mac is interesting, although not relevant to this particular problem. It does explain the apparent overall size differences I have seen before.

Possible solution to wi-fi password issues in OS X Lion

Firstly, thank you for taking the time to read this forum post.
In this post, I shall be outlining the possible solution to the wi-fi password issues that have surfaced in Lion, and will no doubt be fixed by Apple in an coming update. This is sort of a temporary thing that I found to work.
To backtrack in regards to the previous operating system, Snow Leopard, if you wanted to password protect your Wifi connection for example, in regards to sharing the internet connection between, for example, between your Mac and your Ipad, you were able to go into Sharing, Internet Sharing and click on Airport options and set a password.
For the moment this appears to be absent.
Instead, you now have to click on Wi-fi options and what now appears is something along the lines of asking to input a ASCII/HEX password.
At first this seems puzzling and at first, I reinstalled Snow Leopard due to this obvious ommision in regards to the previous method, and like everybody else has said, Internet Sharing worked perefectly well in Snow Leopard.
However, I decided to install Lion once again and try to figure out a solution and as such, I came across this website
http://www.andrewscompanies.com/tools/wep.asp
What the above website allows you to do is get a WEP key, which can be used in the Wi-fi options settings within Internet Sharing.
You simply click on the middle option on the webpage (which I did), to select 128bit key and copy and paste the HEX key, which appears under the section marked Generated Keys, into the password input section of Wi-fi options
This is where another problem arises. If you are sharing the internet connection between your Mac and your Ipad for example, the following steps need to be taken in order for this connection sharing to work
1.When you boot up your Mac, go to System Prefrences, Sharing, untick and tick the Internet Sharing checkbox and click Start on the dialog that appears.
2.Now on your Ipad, go to the Wi-fi tab, find your wireless network and click on the arrow next to it, click on Forget this network, go back to the Wi-fi screen again and tap on your Wi-fi network once again. It will now ask for your password. TYPE IN THE KEY. The connection between the Mac and the Ipad is established.
THE ABOVE STEPS WILL NEED TO BE DONE IF YOU TURN YOUR MAC OFF AND TURN IT BACK ON AGAIN.
As I've said previously, this should be a good temporary solution until Apple comes out with an update that can solve this issue
Thank you for your time

Had the same problem (random WiFi disconnects), but AppleCare solved it.
Delete Macintosh HD/Library/Preferences/SystemConfiguration.
You'll have to reconnect WiFi, but pswd etc should still be there.

Authorization issue to view cube contents

Hi Gurus,
I am getting Authorization issue to view cube contents in Production server, When I execute the cube it is showing me the following statement.
"You do not have sufficient authorization for the infoprovider ZMMG_C05".
Please provide me a possible solution for this.
Thanks,
Jackie.

Hi,
Two things to be checked with respect to authorization for this one.
1) Functional Roles: Check whether Info cube is present in the functional roles that are assigned to you.
                              If not you need to get the functional role in which the Infocube is assigned.
2) Data Access Roles: Check in the data access roles assigned to you, whether you have the access
                                  to the selection that you are using to see the data in the info cube. Else, request
                                  BASIS team to assign the appropriate data access roles to you.
Hope this helps.
Regards,
Bharat

Possible Solution to Google Search Bar Not Working/Safari Not Loading Pages

Hello Apple Forums,
I have recently encountered a possible solution to a problem with Safari. The one in which Safari fails to load any page associated with www.google.com. Especially the Google Search Bar—a feature I use frequently.
After browsing through the forums about the Google Search Bar issue, I took my knewly gained knowledge, and decided to do some diagnosing for myself.
This is what I have done so far to try and solve this issue:
Run Daily, Weekly, and Monthly Cron Scripts
Cleared the following caches:
System Local Computer Cache
System VM (Swap) Files
Curent User Cache
Current User Icon Cache
Internet Explorer Download Cache
Page History
Web Site Cache
Temporary Files
Safari Downloads List
Form Values
Page History
Recent Searches
Site Icons
Web Site Cache
User Cookies (used by Safari)
Finder Recent Applications
Recent Documents
Recent Folders
Recent Servers
Recent Files of AppleWorks 6
Disk Utility Disk Images
Preview
QuickTime Player Favorites/Recent
REALbasic Projects
TextEdit
VideoLanClient
and Other caches of Acquisition Current Downloads
Acquisition Recent Searches
MSN Conversation History
Vicomsoft FTP Client Icon Cache
All of the above runnings of Cron scripts and clearings of Caches were done using Mac Pilot version 1.1.5 (yes the one on the site is an updated version, but I have not downloaded it yet). If you decide to use this program to clear caches, I advise not clearing the Installer Receipts under the System section as Installer Receipts are used to correctly repair permissions. I do not clear Find File Indexes either, because I use the Find File feature quite frequently on my computer and I do not want to have it re-index files all the time (perhaps I'll do it every few months or so to refresh what I've got on the harddrive). Remember, all the information given in this paragraph is relative to Mac Pilot version 1.1.5.
In addition, I have also repaired permissions using Disk Utility 10.4.4 (v145.7) (make sure you restart your computer after you repair permissions). I have taken out items in /harddrive/library/StartUpItems as well as taking out items in /harddrive/library/Internet Plug-Ins and in /user/library/Internet Plug-Ins and in user/library/Caches (restart your computer after taking out or putting in items in these locations).
As of now, all the information mentioned above about trying to fix this problem have NOT worked.
What HAS WORKED for me was tinkering with my 3rd party firewall—Norton Personal Firewall Version 3.0 (48). Under the Protection Settings, I HAD Enable Active FTB support, Enable Stealth mode, Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected), Enable UDP Protection (with Protect outgoing UDP connections, Allow access to essential services, and Protect a range of UDP ports 1 through 1023 selected).
What I CHANGED in Protection Settings was DESELECT Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Upon deselecting that information the Google Search Bar feature in Safari WORKED practically instantaneously. Before hand, anything I inputted into Safari and after hitting Return on the keyboard just wound up hanging there.
Just to be sure, all tests were performed on:
IMac G4 800 Mhz SD Mac OSX 10.3.9 with ALL the latest Software Updates, Except Apple Remote Desktop Client version 1.2.4 and iPod Updater 2006-01-10
I have a cable internet connection with ISP Time Warner Cable (RoadRunner) using a SurfBoard SB4100 Cable Modem on an AirPort Extreme Base Station (Apple Base Station V5.6)
Interesting side note: I have a PowerBook G4 15" 1 Ghz Mac OSX 10.3.9 Laptop running on the same network (although it has an airport extreme card as opposed to the regular airport card in the iMac) with ALL the same latest Software Updates, Except iPod Updater 2006-01-10. The Apple Remote Desktop Client version 1.2.4 does not come up on Software Update on the Laptop and I can not find it on the harddrive using a name search in the Finder Find feature. It does not show up in Applications folder, so I do not know if it is on or active on the Laptop.
The LAPTOP IS ABLE TO USE ALL GOOGLE FEATURES without DESELECTING Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Why this is apparent I have not officially confirmed.
What I do know is that I have tried to Uninstall Norton Personal Firewall Version 3.0 (48) with the appropriate uninstaller but it FAILS during the uninstall (I wanted to uninstall and reinstall, it appears the program became corrupted). What I did to possibly circumvent this was to search for the phrase 'Personal Fire" using the Finder's Find feature (Search for items whose name contains 'Personal Fire') and deleted all the files that came up related to Norton Personal Firewall Version 3.0 (48). I then reinstalled Norton Personal Firewall Version 3.0 (48) since then, and it continues to have the problem with Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected).
What I have not done:
Updated Prebinding
Run TechTool Pro version 4.1.2
Install Combo OSX 10.3.9
Initialize HardDrive with complete reinstallation of OSX 10.3.9
To Summarize Possible Solution
I've tried many possible solutions, what appears to work best as of now is to DESELECT Enable suspicious activity protection (making sure Deny outgoing suspicious traffic and Deny incoming suspicious traffic are deselected) under Protection Settings in Norton Personal Firewall Version 3.0 (48).
One could try deselecting something similar in any firewall application other than Norton Personal Firewall Version 3.0 (48), to see if it is suspicious activity settings in firewalls that cause the problem.
Any comments/feedbacks are extremely welcome.
Hope It Helps!
iMac G4 800Mhz SD 10.3.9 & PowerBook G4 15" 1 Ghz 10.3.9
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD

Hello tr:
Welcome to Apple discussions and thank you for your very very thorough post.
Your instincts to delete anything named "Norton" were right on the mark. Norton software is POISON to Macs running OS X. An additional software firewall is, IMHO, completely unnecessary. Turn on the built-in firewall in OS X - it is robust. In fact, if it is already on, there may be a conflict.
Go to Symantec's web site and use the uninstaller you should find there to get rid of the Norton stuff. After you do that, do a "find" on Norton and Symantec to be sure it is all gone - the stuff hides everywhere.
Barry

Authorization issue within a table in BI

Hello All,
Here is my authorization issue :
We have set up an authorization on infoobject Zapplication. End user is allowed to choose "HR" only.
In Rsecadmin, infoObject Zapplication is restricted to "HR"
Then, this authorization object has been assigned to end user.
This user go to a specific table to select an application and a date.
When user display the possible value he only see "HR". Which means our authorization is correct.
However, this user can enter another value such as "SD". This value does exist in infoObject Zapplication. So, it means that there is an issue with our authorizations settings.
We have added a control table, it's even worse in this case, authorization are not checked at all and all available values are displayed.
Any idea to prevent the user to entered a value within this table ?
Why our authorization does not check the value entered directly in the table ?
Thanks &
Regards
Cath

Hello
For info we manged to restrict acces on this table by using event table from table maintenance and we have combined it with a specific authorisation object.
Regs
C.

Authorization issue in BPS

Hi guys,
I've the authorization issue in a BPS application, where a user can upload a flatfile into a BPS-cube, but only when I select in the authorization object S_RS_AUTH 0BI_ALL.
Without selecting 0BI_ALL (another analysis authorization) yields to the message, that the user has not enough authorization...
Now the user gets access to data in the BW reporting to all the organizational marks like the organization unit (0ORGUNIT).
How is it possible to design the authorizations / analysis authorization, that the same user can upload data via flatfile, but gets only access to transaction data for organizational data which he should see???
How should the analysis authorization should be designed? Has it something to do with the techn. char. like 0TCAACTVT?
THX in advance!
Clemens

Hi,
Have you tried creating Authorization Variable for organizational Unit ?
This will give restricted access to data based on the authorization assigned .
Thanks
Pratyush

HT1414 I updated to iOS 6.1.3 a while ago, but recently noticed I can't access wifi (when the wifi off/on switch is frayed out) does. Anyone know a possible solution to this problem.

This problem occurred in the last few weeks and is a real downer for me because I like apple products but if I can't use wifi then I can't do my work or use much data Any possible solutions will help. Thanks

Hi DJK2012,
If you are having an issue with the Wifi option greyed out, you may find the following article helpful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

ABAP dump on authorization issue

hello,
I am not sure if this is the correct forum for this or not.
I have an ABAP program that was written before I got here that performs the following statement
<b>OPEN DATASET w_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.</b>
where w_file is a file on the app server. the users that run this program have no issues.
I have made a copy of the program to add some additional functionality and when the users run this program, the program is abending with the following error messages when trying to execute the same command stated above
Runtime Error      OPEN_DATASET_NO_AUTHORITY
Except.               CX_SY_FILE_AUTHORITY
I have talking to the security person and he is going to make another role with the authorizations needed to run the program but I am curious as to why the same person can run the one program successfully and my program (which does basically the same thing when it comes to the file processing) abends with the authorization issue.
thanks in advance for your help

I believe you can use FM to check if user has sufficient authorization.
NOTE: authority-check uses PROGRAM NAME, so it looks like your profile should be updated with new program name.
Here is what help says :
                                                                                Check file access authorization
Functionality
This function module allow you to check the user's authorization to
    access files (with the key words OPEN DATASET, READ DATASET, TRANSFER and
    DELETE DATASET). A check should be performed before opening a file.
The authorization check is performed uwing the authorization object
    S_DATASET.
Description of function parameters:
o PROGRAM: Name of the ABAP/4 program that contains the file access. If
       no program name is specified, the system assumes the current program.
o ACTIVITY: Access type. The possible values are:
- READ:              Read file
       - WRITE:             Change file
       - READ_WITH_FILTER: Read file with filter function
       - WRITE_WITH_FILTER: Change file with filter function
       - DELETE:            Delete file
o FILENAME: Name of accessed file
Example
TYPE-POOLS SABC.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
         EXPORTING PROGRAM          = 'ZDATASET'
                    ACTIVITY         = SABC_ACT_READ
                    FILENAME         = '/tmp/sapv01'
         EXCEPTIONS NO_AUTHORITY     = 1
                    ACTIVITY_UNKNOWN = 2.
Notes
The values to be passed as the ACTIVITY are defined as constants in the
    TYPE-POOL SABC.

Possible solution to authorization issues

Similar Messages

Maybe you are looking for