Possible solution to Micro connection proble

My Micro wouldn't connect properly to my computer even though it can charge through the USB cable. When I go into the Explorer, it says that it doesn't detect the player. So, through ALOT of trial and error, I came up with a way that makes my Micro connect to the computer and do all the tasks. So far, my Micro has performed normally.
Try this before returning your Micro:
First, I noticed that the connection will NOT work if the player is charging by the USB, indicated by the flashing lightning symbol at the right corner.
Somehow, you must make the lightning symbol disappear. I did this by a few different ways.
. Sometimes after the player idle shuts down, I turn off my computer, ending the power. When I turn on the computer again, the charging symbol is off.
2. Leave your player plugged in the USB cable until it is fully charged. Then the symbol will disappear and a plug will appear.
It doesn't matter which methods you use, as long as the player stops charging.
Second, you must wait for the player to idle shutdown. Then wait 5 minutes after that.
Then, while the Micro is OFF, try opening it with Media Explorer. The Explorer should NOT detect the player. This is a good thing, usually the Explorer automatically turns on the player for you.
Now, turn on the player and access the Explorer again. It should work. If it doesn't, sue Creative.

Anyone know how to fix this problem? Can this be fixed by firmware update or would I have to set my player in for repair?
By the way, Creative really screwed over the early adopters of the Zen Micro . It is obvious that the Micro 6GB Photo was deep into development before the initial Micro came out during the holidays or else it would have never made it in time for CES. This is MORE reason to believe that Creative was pushing a flawed product into the stores in time for the holidays. And now the Micro is not working for a number of people and it seems that Creative is abandoning this initial version (and all its users) and pushing a new product. Am I the only one angered by this?

Similar Messages

After trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

after trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Zen micro connections probl

We just changed our OS from xp home to xp professional because our technican said that our xp home doesnt support usb 2.0 When it was done I got the zen micro cd and installed meciasource, drivers, zen micro explorer and wmp 0. Our PC has 4 usb ports, 2 front 2 back. When I tried connecting my micro to the first front port it wasnt recognized and my micro locked up. I had to remove the battery to get it going again. Then I tried the other front port and it worked.
Then after a few days I connected my micro and the usual box that pops out from the system tray pops out that its connected. However in mediasource it says player not connected. I tried restarting my PC but it didnt work. So I did a disk cleanup on my micro and it was recognized by mediasource. But after transfering the first two songs it timed out on the next couple of songs. Then it transferred some songs. When it was done my player wasnt recognized by mediasource. I tried the two back ports but only one is working. The other one has the same problem as stated above.
Can anyone help me fix this? Its such a hassle to use the back port every time coz I have to move some things around the PC to acces the back ports. All usb ports are working with our digital camera. Im also afraid that waht happened to the front port that was working previously would happen to the back port and then I cant transfer any songs anymore.

miguel wrote:
The front ports worked with the micro for a while after installing xp pro. And it was usb 2.0. On our xp home that is always updated the front ports were only usb .. So this means that our front ports are usb 2.0 right?
The de facto way to check is (a) to ensure you have XP SP, and that you've double checked in Device Manager that the chipset has automatically upgraded to USB2 (it doesn't always happen) and (b) to connect a high speed device to the port.
Our digicam and cellphone all connect on the front ports in usb 2.0 Only the micro doesnt work the front ports.
I've just written this in another post, that not all USB chipsets are made equal. Cheaper chipsets no doubt aren't fully tested or they don't comply with the full USB standard. Creative have assured that their players and drivers are completely compliant with the USB standard. BUT it could be some other bug comes into play, either with the Creative driver or the chipset and drivers. Hard to say. I've seen similar problems with iPods.
I think our usb came with the motherboard. I dont remember any pci cards. I think our mobo is intel D865GBV but im not really sure. Is there a way to know what our motherboard is?
You can use a product like Belarc Adviser, which will check the hardware contents of the PC.

Zen Micro connection probl

Hi all,
I just got my Zen Micro yesterday, beautiful product, fun to use. It seems to be a little glitchy though- I have already successfully loaded about 2 gbs of music onto it, but now my computer isn't detecting the device when i plug it in. I get the windows sound when i plug it in, but Zen Micro Media Explorer fails to detect it. The screen on the player stays on the "Docked" screen (with white arrows), and locks up. I end up having to take out the battery and trying it over again, which still doesn't work. Anyone have any suggestions to get around this problem?
some notes:
- i am using a toshiba laptop, very fast and very new.
- i tried the Creative Mediasource at first, but that was giving me problems, so i unintalled and reinstalled just the Zen Micro Media Explorer, which has until recently been working fine.
- batteries full, player in perfect working condition otherwise.
i could sure use some advice...i don't want to have to send it back to creative after waiting for this player for a while!
thanks in advance
alex

Absynthesis,
Have you gone into rescue mode on the player yet and tried a cleanup? This can help with the problem that you are experiencing. Instructions on this are in a sticky message at the top of this board.
Also you may want to make sure all of the drivers (motherboard drivers) for your laptop are up to date.
Jeremy

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

IPhone connectivity to Car Stereo -- POSSIBLE SOLUTION

I stumbled across a possible solution to the iPhone not working with some car stereos. Granted, I have a cheap name brand stereo ,but it has the full ipod interface built-in. It's a Valor NVG-710W ($999 from frys).
My iPhone worked in my truck from day one, but after a week, i made some playlist changes, and it quit working. After a trip to the Apple Store, to no avail, I was determined to figure out what happened. Making sure it wasn't the radio itself, I tested my wife's iphone, and it worked. I started tweaking the settings and playlists.
What I found is this: the car stereo doesn't comprehend "Smart Playlists." Everytime I sync'd a Smart Playlist to the iPhone, the stereo would not connect to iPhone, but if I took the Smart playlist's off, it would connect immediately and start playing thru the stereo.
Hope this tidbit helps someone out.
--BrayNShocK

That happens to me occasionally. Have you tried power cycling the iphone? that seems to fix it for me when it happens.
Mac Pro Mac OS X (10.4.10) macbook, and 2 iphones

IPod is not recognized by Windows Vista - possible solution

During the past couple of weeks that I faced this problem I found out that a lot of people had the same question as I did.
Here is a possible solution.
I have HP Pavilion laptop with Windows Vista. After I connected my new iPod – it didn’t show up in My Computer as a new device and in Device Manager it was listed in “Other devices” with a question mark next to it. I already had iTunes installed – it didn’t show up in iTunes. On the attempt to reinstall the driver I had a message that the driver was found but an error occurred while installing it.
Here is what I did:
1. Install iTunes (it has iPod driver for Vista in it).
2. Turn on iPod and connect it to computer.
3. Restart computer with iPod turned on and connected to computer.
4. On the start up the computer will begin automatically installing the driver and the message will appear in the corner that new device is being installed.
5. After it has been installed – check My Computer – you should see it listed there.
6. Run iTunes and configure iPod.
iTunes might run a little bit slow when configuring iPod for the first time.
Good luck.

if only this fix worked for windows xp or even 2000 (at my job)
insane, but it IS a driver/usb problem i now know, at least i've gotten that far.

Possible Solution to Google Search Bar Not Working/Safari Not Loading Pages

Hello Apple Forums,
I have recently encountered a possible solution to a problem with Safari. The one in which Safari fails to load any page associated with www.google.com. Especially the Google Search Bar—a feature I use frequently.
After browsing through the forums about the Google Search Bar issue, I took my knewly gained knowledge, and decided to do some diagnosing for myself.
This is what I have done so far to try and solve this issue:
Run Daily, Weekly, and Monthly Cron Scripts
Cleared the following caches:
System Local Computer Cache
System VM (Swap) Files
Curent User Cache
Current User Icon Cache
Internet Explorer Download Cache
Page History
Web Site Cache
Temporary Files
Safari Downloads List
Form Values
Page History
Recent Searches
Site Icons
Web Site Cache
User Cookies (used by Safari)
Finder Recent Applications
Recent Documents
Recent Folders
Recent Servers
Recent Files of AppleWorks 6
Disk Utility Disk Images
Preview
QuickTime Player Favorites/Recent
REALbasic Projects
TextEdit
VideoLanClient
and Other caches of Acquisition Current Downloads
Acquisition Recent Searches
MSN Conversation History
Vicomsoft FTP Client Icon Cache
All of the above runnings of Cron scripts and clearings of Caches were done using Mac Pilot version 1.1.5 (yes the one on the site is an updated version, but I have not downloaded it yet). If you decide to use this program to clear caches, I advise not clearing the Installer Receipts under the System section as Installer Receipts are used to correctly repair permissions. I do not clear Find File Indexes either, because I use the Find File feature quite frequently on my computer and I do not want to have it re-index files all the time (perhaps I'll do it every few months or so to refresh what I've got on the harddrive). Remember, all the information given in this paragraph is relative to Mac Pilot version 1.1.5.
In addition, I have also repaired permissions using Disk Utility 10.4.4 (v145.7) (make sure you restart your computer after you repair permissions). I have taken out items in /harddrive/library/StartUpItems as well as taking out items in /harddrive/library/Internet Plug-Ins and in /user/library/Internet Plug-Ins and in user/library/Caches (restart your computer after taking out or putting in items in these locations).
As of now, all the information mentioned above about trying to fix this problem have NOT worked.
What HAS WORKED for me was tinkering with my 3rd party firewall—Norton Personal Firewall Version 3.0 (48). Under the Protection Settings, I HAD Enable Active FTB support, Enable Stealth mode, Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected), Enable UDP Protection (with Protect outgoing UDP connections, Allow access to essential services, and Protect a range of UDP ports 1 through 1023 selected).
What I CHANGED in Protection Settings was DESELECT Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Upon deselecting that information the Google Search Bar feature in Safari WORKED practically instantaneously. Before hand, anything I inputted into Safari and after hitting Return on the keyboard just wound up hanging there.
Just to be sure, all tests were performed on:
IMac G4 800 Mhz SD Mac OSX 10.3.9 with ALL the latest Software Updates, Except Apple Remote Desktop Client version 1.2.4 and iPod Updater 2006-01-10
I have a cable internet connection with ISP Time Warner Cable (RoadRunner) using a SurfBoard SB4100 Cable Modem on an AirPort Extreme Base Station (Apple Base Station V5.6)
Interesting side note: I have a PowerBook G4 15" 1 Ghz Mac OSX 10.3.9 Laptop running on the same network (although it has an airport extreme card as opposed to the regular airport card in the iMac) with ALL the same latest Software Updates, Except iPod Updater 2006-01-10. The Apple Remote Desktop Client version 1.2.4 does not come up on Software Update on the Laptop and I can not find it on the harddrive using a name search in the Finder Find feature. It does not show up in Applications folder, so I do not know if it is on or active on the Laptop.
The LAPTOP IS ABLE TO USE ALL GOOGLE FEATURES without DESELECTING Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Why this is apparent I have not officially confirmed.
What I do know is that I have tried to Uninstall Norton Personal Firewall Version 3.0 (48) with the appropriate uninstaller but it FAILS during the uninstall (I wanted to uninstall and reinstall, it appears the program became corrupted). What I did to possibly circumvent this was to search for the phrase 'Personal Fire" using the Finder's Find feature (Search for items whose name contains 'Personal Fire') and deleted all the files that came up related to Norton Personal Firewall Version 3.0 (48). I then reinstalled Norton Personal Firewall Version 3.0 (48) since then, and it continues to have the problem with Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected).
What I have not done:
Updated Prebinding
Run TechTool Pro version 4.1.2
Install Combo OSX 10.3.9
Initialize HardDrive with complete reinstallation of OSX 10.3.9
To Summarize Possible Solution
I've tried many possible solutions, what appears to work best as of now is to DESELECT Enable suspicious activity protection (making sure Deny outgoing suspicious traffic and Deny incoming suspicious traffic are deselected) under Protection Settings in Norton Personal Firewall Version 3.0 (48).
One could try deselecting something similar in any firewall application other than Norton Personal Firewall Version 3.0 (48), to see if it is suspicious activity settings in firewalls that cause the problem.
Any comments/feedbacks are extremely welcome.
Hope It Helps!
iMac G4 800Mhz SD 10.3.9 & PowerBook G4 15" 1 Ghz 10.3.9
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD

Hello tr:
Welcome to Apple discussions and thank you for your very very thorough post.
Your instincts to delete anything named "Norton" were right on the mark. Norton software is POISON to Macs running OS X. An additional software firewall is, IMHO, completely unnecessary. Turn on the built-in firewall in OS X - it is robust. In fact, if it is already on, there may be a conflict.
Go to Symantec's web site and use the uninstaller you should find there to get rid of the Norton stuff. After you do that, do a "find" on Norton and Symantec to be sure it is all gone - the stuff hides everywhere.
Barry

Is it possible that iMac corrupts connected external hdd-s drive via USB?

Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Possible solution to wi-fi password issues in OS X Lion

Firstly, thank you for taking the time to read this forum post.
In this post, I shall be outlining the possible solution to the wi-fi password issues that have surfaced in Lion, and will no doubt be fixed by Apple in an coming update. This is sort of a temporary thing that I found to work.
To backtrack in regards to the previous operating system, Snow Leopard, if you wanted to password protect your Wifi connection for example, in regards to sharing the internet connection between, for example, between your Mac and your Ipad, you were able to go into Sharing, Internet Sharing and click on Airport options and set a password.
For the moment this appears to be absent.
Instead, you now have to click on Wi-fi options and what now appears is something along the lines of asking to input a ASCII/HEX password.
At first this seems puzzling and at first, I reinstalled Snow Leopard due to this obvious ommision in regards to the previous method, and like everybody else has said, Internet Sharing worked perefectly well in Snow Leopard.
However, I decided to install Lion once again and try to figure out a solution and as such, I came across this website
http://www.andrewscompanies.com/tools/wep.asp
What the above website allows you to do is get a WEP key, which can be used in the Wi-fi options settings within Internet Sharing.
You simply click on the middle option on the webpage (which I did), to select 128bit key and copy and paste the HEX key, which appears under the section marked Generated Keys, into the password input section of Wi-fi options
This is where another problem arises. If you are sharing the internet connection between your Mac and your Ipad for example, the following steps need to be taken in order for this connection sharing to work
1.When you boot up your Mac, go to System Prefrences, Sharing, untick and tick the Internet Sharing checkbox and click Start on the dialog that appears.
2.Now on your Ipad, go to the Wi-fi tab, find your wireless network and click on the arrow next to it, click on Forget this network, go back to the Wi-fi screen again and tap on your Wi-fi network once again. It will now ask for your password. TYPE IN THE KEY. The connection between the Mac and the Ipad is established.
THE ABOVE STEPS WILL NEED TO BE DONE IF YOU TURN YOUR MAC OFF AND TURN IT BACK ON AGAIN.
As I've said previously, this should be a good temporary solution until Apple comes out with an update that can solve this issue
Thank you for your time

Had the same problem (random WiFi disconnects), but AppleCare solved it.
Delete Macintosh HD/Library/Preferences/SystemConfiguration.
You'll have to reconnect WiFi, but pswd etc should still be there.

XFI "no supported hardware" problem possible solut

I purchased my xfi about 4 months ago & has worked flawlessly until 2 days ago. Kept giving me the dreaded "no supported hardware" error along with BSOD's, etc... . Tried all the possible solutions in the FAQ, updated bios, changed, diff pci slot, reinst xp,?on & on...no luck. Was about to go return the card when I stumbled on this link selling the card:?http://www.scan.co.uk/Products/Produ...oductID=42270II noticed this at the botom of the ad:Please note: On some systems it is advisable to connect the XFi Card to a Floppy Dri've Power Connector in order to give maximum performance, this is done using the 4 pins on the top edge of the card. As this is an OEM card it does not come with a cable for this but most power supplies are fitted with a spare floppy power connector.
So figuring i had nothing to lose i plugged it in & lo & behold it all works perfectly again. I found nowhere in manual or help about plugging this in but I thought sharing this might help someone. Maybe it will fry my card eventually but it seems to have solved my problem for now. I suspect that maybe my pci bus isnt providing enough voltage for the card now but everythig seems fine. Oh, here is my general specs:?Gigabyte Socket 939 AGP Motherboard, Athlon64 3500+ CPU, Nvidia 6800GT AGP, 550W Power Supply

I purchased my xfi about 4 months ago & has worked flawlessly until 2 days ago. Kept giving me the dreaded "no supported hardware" error along with BSOD's, etc... . Tried all the possible solutions in the FAQ, updated bios, changed, diff pci slot, reinst xp,?on & on...no luck. Was about to go return the card when I stumbled on this link selling the card:?http://www.scan.co.uk/Products/Produ...oductID=42270II noticed this at the botom of the ad:Please note: On some systems it is advisable to connect the XFi Card to a Floppy Dri've Power Connector in order to give maximum performance, this is done using the 4 pins on the top edge of the card. As this is an OEM card it does not come with a cable for this but most power supplies are fitted with a spare floppy power connector.
So figuring i had nothing to lose i plugged it in & lo & behold it all works perfectly again. I found nowhere in manual or help about plugging this in but I thought sharing this might help someone. Maybe it will fry my card eventually but it seems to have solved my problem for now. I suspect that maybe my pci bus isnt providing enough voltage for the card now but everythig seems fine. Oh, here is my general specs:?Gigabyte Socket 939 AGP Motherboard, Athlon64 3500+ CPU, Nvidia 6800GT AGP, 550W Power Supply

Micro Photo Probl

My micro photo is stuck on the recovery screen and every option i pick just freezes it...when i clicked Reload Firmware it just sat with the "Erasing Firmware.." message up for hours. I tired to re-install the firmware from my computer and it fails every time. Help please...

I am also having the exact same problem.My dad got it for my son for xmas, xmas day it froze at the building library part. Toay, just over a week later it is frozen on the logo screen, making an odd noise.Reading previous threads this may denote a HDD failure!!!I have also tried reboot, format all, reload firmware and clean up. Always stops there.On the Zenmicrophoto I have there is no reset button. Whilst simultaniously?holding the switch at the on position and inserting the battery gets you to the rebot etc screen. I have had enough of this but worse is that my Dad paid a fortune for this and my son is without his present. Ok I can send it back, blah, blah, blah but when you pay out good cash you expect it to work.Anyway, sorry to go on but if anyone else out there has any other possible solutions then that would be fantastic.:manmad:

Possible solution to book uploading problem

I posted this as a reply to TM2 ... redundancy is sometimes very helpful ...
I ran into the same problem in last couple of weeks ... deadline for books and all.
I too gave up trying with Aperture and used BLUR's BookSmart, thinking that it may be a solution re overcoming problems with uploading (Aperture/Apple not providing useful solutions for me) .... but, ran into same problem - I was not able to upload finished book and got same msg re error and request to check my ISP connection, etc ... finally, I called Comcast re possibly a problem with their router or something like it ... I got very lucky and connected with someone who was very knowledgeable, pleasant, and accessible ... SOLUTION: bi-pass the Belkin 54g ... hook up CPU ethernet connection directly to cable router - BINGO! ... Belkin seems to be the potential cause for problem: It most likely needs firmware update - checked their web site and there is one available .... in time will upload it.
Hope this helps and it is same solution for Aperture trouble's re uploading issues, etc ... Merry Christmas.
ApB

Intresting notes... When you download album artwork from iTunes it really doesn't add it to the MP3 track, it stores it elsewhere and assoicates it internally some how to the album. Where as adding a artwork in through the actual file will change the size of your MP3 track, by embedding the artwork into it so that other apps (like windows media) can see them.
That would be an interesting find if that is indeed the case.... Furthermore if that solves the problem, than apple should have an easy fix on thier hands.
However, since most of my music is direct downloads from iTunes and has the artwork directly embedded into the music files like I mentioned above that might be why I've never encountered the issues.... As I found out about this quirk a while back, because some of the tracks on the PC or on my iPod would never show the album cover before...
Hopefully someone else with the same problem can help confirm this possible solution!

Possible solution to Micro connection proble

Similar Messages

Maybe you are looking for