Possible t-codes for changing schedule line dates

Hi
I am trying to find out all possible t-codes for changing schedule dates in sales order. I found out of the following t-codes:
VA02
CO06
V_RA
V_V2
Experts please tell if I'm missing any t-code
TIA

Hi,
As far as my knowledge goes, you have got all the tcode. if you get more tcode send me a mail.
Thanking you
Regards
Manoj
([email protected])

Similar Messages

Change schedule line date

Dear All,
I have a requirement where required delivery date for one divisions material
in sale order and STO should automatically propose todays date plus 10 days i.e.
if any sale order or STO created today then required delivery date in STO and
SO should show 24.10.2010.
Accordingly we have maintained planned delivery time in material master 10 days in MRP2
view and it is working fine but another requirement is that user can reschedule the
delivery and he can change the schedule line date in So (RV45A-ETDAT) before or after
10 days in VA02 but it is not allowing to change it is considering todays date + 10 days.
In STO it is allowing for change the delivery date (MEPO1320-EEIND).
Plz advice how I can make the field RV45A-ETDAT changeable in sale order through VA02.
Regards,
sps.

Hello,
If you want a sales order to have the requested delivery date automatically populated with today's date +10 business days, this can be maintained via the following SPRO path:
SAP IMG --> Sales and Distribution --> Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types
Go into the sales document type you would like to maintain. In the section "Requested delivery date/pricing date/purchase order date", there is a field Lead Time in Days. Put 10 in here, and the requested delivery date will automatically be set to +10 days when an order is being created.
Planned delivery time in the material master is for when you're out of stock and the system proposes the next available delivery date. If you have stock on hand, when the availability check runs the system will use the line level delivery date. At order entry, when a line item created this line level delivery date is taken from the requested delivery date.
I hope this helps you.

Change schedule line date in VA01

hi frnds,
in VA01 after giving the material number and quantity system will go to AVAILABILITY CONTROL screen. here SAP will give delivery date and confirmed qty according to quantity of first screen.
now i need to change these dates based on one field (customised field "vendor" of item level).
where i need to write the logic?
points will be rewarded for helpful answers
regards,
balu

hi Krishna,
i have tried it with break point. initially it was triggering. it means after giving the material number and quantity it stopped in break point. but after giving the vendor in ADDITIONAL DATA B tab of item level, it was not stopping there.
i need to write the logic after giving the vendor, schedule line dates should modify.
Regards,
balu

T-code for changing valid to date

hi
is there any t-code other than MP01 to change Valid to date for MPNs?
Regards
Smitha

Hi,
I dont think , we can do it from other transaction code.
MP01                   Maintain AMPL Records
MP02                   Display AMPL Records
MPAD                   Delete archived materials from AMPL
Thanks,
Naveen Inuganti

User Exit/BADI name required for changing schedule lines (VA01 and VA02)

Hi all,
Please tell me an exit or badi for modifying VBEP date i.e. VBEP-EDATU which triggers for a change in any of the following fields:
1. VBAK-KUNNR; 2. VBAK-VDATU and 3. VBAP-WERKS
Currently I tried using USEREXIT_MOVE_FIELD_TO_VBEP and FORM USEREXIT_CHECK_VBEP but nothing is giving me the results as desired.
Pls help, points will b awarded for helpful ans.
thanks
Sangharsh

Have a look at below link which gives details related to user exits in VA01/VA02.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Schedule Lines dates for sales order

Our goal is this: On the line item > Schedule Line tab there is the requested delivery date. In the details of that schedule line there are five different dates:
Delivery Date
Goods Issue Date
Loading Date
Material Aval. Date
Transportation Plan. date
We need to be able to put in the customers requested date that is in the future on this schedule line, but if the parts were to be recieved in earlier then the date they requested, then we would want the parts to ship out early automatically.
For Example: Customer Requested date is 01/31/08 and the parts are confirmed to come in on 01/31/08. The parts end up coming in on 01/20/08, so the next time the delivery list is run, we would like the parts to ship out right away.
Is there a way to do this?

Thank you for the quick response. I understand that we can use the reschedule report to manually monitor the product whether is comes in or not, but was hoping to achieve having a static date on the schedule lines of when the customer requests the parts, and then the delivery date that activates the MRP and ATP checks would be an earlier date. So when the parts come in, it would read from the delivery date.
Not sure if this is even possible, or if SAP standard for the schedule line dates is to how only one active date per schedule line.

MASS CHANGE IN SCHEDULE LINE DATE

Hi All,
Will u advise whether it is possible to change schedule line date in MASS
Example. We are having make to order scenario. Sales order is prepared with 25 different line items with shipment date 10 th Feb. Out of these 25 items 10 items are ready by 20 th Jan. If we want to ship these goods on 20 th Jan. we have to change schedule line date item wise.
Is there any way that we can make this change in a mass without changing delivery date of the sales order.
Thanks
Ravi

V_V2 calls a program that can be 'customized' since it consist of 2 phases:
1) selection phase
2) rescheduling phase
You can copy program SDV03V02 into a custom one and add your own selection criteria without altering the second part of it.
I alreay made it and it works fine even when upgrading.
regards
Roberto Mazzali
pls. reward if helpful

Delivery is not possible as per Schedule line dates

Hi Gurus,
The schedule lines insales order are for eaxample---
01.12.2008 -   10 pieces (quantity)
15.12.2008 -   10
10.01.2009 -   10
25.01.2009 -   10
Tried to deliver the quantity 10 dated 15.12.2008 in the last after all the materials pertaining to other dates are delivered, but system is throwing error as no schedule lines for dated 15.12.2008. But when i checked, delivery is not done for 15.12.2008 and the rest are completed.
But system allows to deliver the balance 10 quantity either on 25.01.2009 or on a future date but not on 15.12.2008 on which delivery was not done.
What could be the reason????
Thanks for your help
MM

Hi
When I see the schedule line in the sales order where in the qty in the delivered qty column (second column from the confirmed qty column) is updated item wise irrrespective of the delivery done as per scheduleline date.
It means though the delivery and PGI is not done for the date 15.12.2008, but the qty in the delivery qty column is updated and the balace to to be delivered shows for the last date.
So here iam able to deliver only on the last date i.e. 25.01.2009 or at a later date for the schedule line date missing in between and not on the specific date.
Is this how SAP standard works - I was wondering why i cannot deliver any schedule line qty and date later after delivering quantities of the subsequant schedule lines.

Changing schedule line details via BAPI_PO_CHANGE

Hello,
I am trying to use BAPI_PO_CHANGE to change the schedule line quantity on a Purchase Order.
I am populating structures :-
POSCHEDULE
POSCHEDULEX
but I am unable to change the schedule line details. The BAPI call returns a success message saying 'No Data wa schanged.'
I have also tried passing in additional structures:-
POITEM
POITEMX
I am not sure whether these are necessary but I thought I'd give it a go.
I seem to get a little further in this case but I get a different error.
I can successfully update the PO manually via ME22N.
Does anyone have any example code for updating schedule lines using this BAPI.
Thanks,
Ruby
Moderator message - Moved to the correct forum
Edited by: Rob Burbank on Dec 14, 2009 1:17 PM

Hello Aveek,
Thank-you for the link. I have had a look at this program but I cannot see how the poschedule and poschedulex structures get populated.
It looks like this could be happening within form get_uom_conversion but I can't see the code for this.
Could you send me a copy of this routine please?
I need to understand what fields to set within these structures.
At the moment, all I am populating is as below but I can't see what I am doing wrong:-
wa_po_schedule-po_item = '00001'.
wa_po_schedule-sched_line = '0001'.
wa_po_schedule-DELIVERY_DATE = '20100204'.
wa_po_schedule-quantity = '4.000'.
append wa_po_schedule to lt_po_schedule.
wa_po_schedule_x-po_item = '00001'.
wa_po_schedule_x-sched_line = '0001'.
wa_po_schedule_x-po_itemx = 'X'.
wa_po_schedule_x-sched_linex = 'X'.
wa_po_schedule_x-DELIVERY_DATE = 'X'.
wa_po_schedule_x-quantity = 'X'.
append wa_po_schedule_x to lt_po_schedule_x.
Thanks,
Ruby

How to change schedule line fields when save sales documents in va01/va02

Hi, every Experts,
I want to change schedule line when save the sales documents in va01 or va02, such as change delivery block or schedule line category.
of course, can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE, but I do not know to use this user exit, I am newer about ABAP.
Please help me , thanks.
best regards
Passion Wu

Hi,
For changeing schedule line: select line item, GOTO --> item --> schedule lines --> enter the confirmed qty.
USEREXIT_SAVE_DOCUMENT_PREPARE program is MV45AFZZ
For your reference
USEREXIT_SAVE_DOCUMENT_PREPARE - Can I use in button, but skip
regards,
Mohanprabu C

Change Schedule Line category through user exit - Issue with transfer of requirements

Dear All,
There is a user exit in Sales Order program MV45AZZ - PREPARE_TO_SAVE . It is currently being used to implement code to change schedule line category based on the status of the sales order.
When Blocked , category is set to ZP, and when Released then it is set to CP.
Now, when we change ZP to CP manually through VA02, I am able to see the requirements transferred in tcode MD50.
The problem is, when user changes status of sales order from blocked to released, the userexit changes categories from ZP to CP, but the requirements are not transferred ( cannot see it in MD50 ).
I tried searching the SCN, tried googling it, its been a week now and I havent found any clear solution.
So, far what I understood is Availability Check needs to be carried out again. But I am not clear how to trigger it again.
Are there any indicators that need to be set or any internal tables to be updated or any FM to call or any other user exit to place the code in.

?? Any suggestion friends ?

GATP scenario and Rescheduling Schedule line dates

Hi All,
Can anybody tell me where and how can I reschedule the Schedule line dates available from a GATP check. My requirement is as follows:
For a GATP material, after the GATP check, I need to push the Goods Issue date AHEAD based on the DAY and TIME maintained in the Route Schedule id (VL51, VL52, VL53) for the Route, Transportation Group, Customer, Shipping Point and Shipping conditions.
I have presently coded my development in the Enhancement option after the FM RV_AVAILABILITY_CHECK in the include FV45VFMV_MVERF_PRUEFEN. Here I have called the FM APO_SCHEDULING to get the new set of Schedule line dates by passing the Goods Issue date that I calculate based on teh Route Schedule id.
But the problem here is that the Schedule line dates that I get here have different time intervals from the Schedule line dates that I get normally in a GATP process in a standard process. Logically I feel, these time intervals should be the same while the Enhancement is in place or not.
Please provide me inputs if anybody had faced this issue...
Thanks in advance,
Susanth Kumar

Hi
When I see the schedule line in the sales order where in the qty in the delivered qty column (second column from the confirmed qty column) is updated item wise irrrespective of the delivery done as per scheduleline date.
It means though the delivery and PGI is not done for the date 15.12.2008, but the qty in the delivery qty column is updated and the balace to to be delivered shows for the last date.
So here iam able to deliver only on the last date i.e. 25.01.2009 or at a later date for the schedule line date missing in between and not on the specific date.
Is this how SAP standard works - I was wondering why i cannot deliver any schedule line qty and date later after delivering quantities of the subsequant schedule lines.

Change shipping dates/times for confirmed schedule line

Hi,
I am having a problem changing the confirmed schedule line in a Sales Order VA01.
I have added my code into the user-exit
*       FORM USEREXIT_MOVE_FIELD_TO_VBEP                              *
*       This userexit can be used to move some fields into the sales *
*       dokument schedule line workaerea VBEP                         *
*       SVBEP-TABIX = 0: Create schedule line                        *
*       SVBEP-TABIX > 0: Change schedule line                        *
*       This form is called at the end of form VBEP_FUELLEN.          *
FORM userexit_move_field_to_vbep.
      vbep-ezeit = '235900'.
      vbep-wauhr = '235900'.
      vbep-lduhr = '235900'.
      vbep-mbuhr = '235900'.
      vbep-tduhr = '235900'.
However, in the above code I manage to only change the first schedule line in case I choose a delivery proposal. I need to change the line with a confirmed quantity. Instead I change only the first shedule line without a confirmed quantity.
Question: Which user-exit can i use to change shipping times dates for all schedule lines or just confirmed schedule lines?
Thanx

Hi,
Use form routine "USEREXIT_SAVE_DOCUMENT_PREPARE" in MV45AFZZ. Update VBEP as well as XVBEP Structures.
Regards
Vinod

Schedule Line Date Changed By Standard Code After User Exit

We've implemented USEREXIT_MOVE_FIELD_TO_VBEP to conditionally change the schedule line date (it changes VBEP-EDATU) when sales orders are being created. This functions correctly when VA01 or EDI is used. However, when the order is created using BAPI_SALESORDER_CREATEFROMDAT2, standard code executing after the user exit changes the schedule line date to an incorrect value.
The user exit correctly changes the schedule line date; then later on in the execution subroutine VBEP_FUELLEN_VBEPKOM in include FV45EFEP_VBEP_FUELLEN_VBEPKOM is executed which changes the date on line 37 using the value in US_VBEPKOM-EDATU. US_VBEPKOM-EDATU is in scope in the user exit, but earlier in subroutine VBEP_FUELLEN_VBEPKOM (line 12 to be exact) this variable is updated with the value in US_VBEPKOM1-EDATU, which is not in scope during the user exit. So, USEREXIT_MOVE_FIELD_TO_VBEP doesn't have access to US_VBEPKOM1-EDATU and can not ensure that the correct value is used later on in subroutine VBEP_FUELLEN_VBEPKOM.
I noticed at the end of subroutine VBEP_FUELLEN_VBEPKOM it calls USEREXIT_MOVE_FIELD_TO_VBEPKOM. I could update VBEP-EDATU here to correct the error whenever the order is created using the BAPI, but it would be nice to have a solution that could be implemented only in USEREXIT_MOVE_FIELD_TO_VBEP without also having to implement USEREXIT_MOVE_FIELD_TO_VBEPKOM.
So my question: is there a way to update the schedule line date in USEREXIT_MOVE_FIELD_TO_VBEP where it won't be changed later in subroutine VBEP_FUELLEN_VBEPKOM when the order is created using the BAPI?

Hi Caetano,
thanks for your suggestion
Yes, we use firm zone for few of the vendors. there the system don't change the schedule lines.
Also for the stock transfer PR's there is no firm zone and the lead time is one day. in this case it changes everyday after the MRP run.
the stock transfer PR's leads to the creation of Schedule lines from the source plant. Since this PR gets changed everyday. the alerts coming out of MD07 gets changed and we really did not know if this order is delayed or not. In the source plant we use the firm zone to avoid moving the schedule line. But then the alerts are always not correct.
is there any setting which helps in not moving the PR everyday without using " start in the past"
thanks
Nagendra Kumar

Schedule line date in Sale order for backward sched.

Dear Experts,
In my MTO Scenario, I want to Use Backward Scheduling, so as any change in Schedule line dates in Sale order shall take effect at least in planned order Stage, i.e in output of MRP,
But not happening so..
I have customized OPU5 and checked OPU3 as well,
Please suggest...
Regards
Raghu

HI Mario,
Thanks for reply,
I have not worked in this strategy but will try,
What i found was, in Planned orders detailed scheduling tab, the Scheduling type appeares to be Forward, but when i convert it to Production order it shows backward scheduling.
This duel behavior is difficult to understand.
Regards
Raghu

Possible t-codes for changing schedule line dates

Similar Messages

Maybe you are looking for