Possible to add classification to Measurement Document

Hi,
Is it possible to configure classification for Measurement Document objects?
Regards,
Ramesh-

Hi Ramesh,
Classification can be done for measuring point using the class type 037 . I dont see any std class for the measuring document.
Since measuring doc is a document generated for the measuring point. I think you can do any analysis base on measuring point.
Let us know your business requirment so that we can think of some workaround.
DP

Similar Messages

Since one of the updates of firefox it is not possible to add a document to my email i.e. Telfort.nl

Since one of the latest updates of firefox it is not possible to add a document to my email account i.e. Telfort.nl
I checked with Telfort and no problems of this kind is known.

You can check for problems caused by extension and plugins.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins
You can try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
* http://kb.mozillazine.org/mimeTypes.rdf
* http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can try to reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
Reset creates a new profile and tries to import some settings from the old profile leaving the old profile intact.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Is it possible to add an extension/add-on/plugin to iWork document?

Is it possible to add an extension/add-on/plugin to iWork document that gets called at the time of opening a document and saving a document? This add on will basically see the file type being opened and for specific file types,this add-on will convert the file being opened to iWork format when opening and convert to the custom format when saving.

Numbers has not built-in facility for plugins. It does support Applescript and can, therefore invoke Applescripts from a menu or be included in performing task in an Applescript.

Is it possible to add documents (word files, pdfs, jpgs, zip files) to dvd?

Hello
I have my film compressed on dvd and was wondering if it is possible to add a folder with some files...word documents, jpgs, etc?
Thanks

Hi Bruce
Yes, you can. There are a couple of ways to approach it.
The first is to simply include the folder, and have some kind of written instruction on the DVD, or in the box, as to how to find them. So there's no intelligent linking between the DVD video and the extra content. To accomplish this, create a folder manually in the Finder (eg "Temp"), create a subfolder within it called, for example "Extra Content", and then find the "DVD-ROM" section in the Inspector, tick "Content" and browse for your parent (Temp) folder. The Temp folder does not get added to the DVD, but its contents (the Extra Content folder) does.
The second is to make the DVD more interactive by making links between the DVD content and the additional material. So, for example, you can build a button which automatically opens a Finder window of the Extra Content folder. You should look at the "DVD@ccess" feature in the Help menu / user guide to find out more. This tends to be less reliable, since Mac users have to set DVD Player to use DVD@ccess links, and PC users have to install a piece of software that DVD Studio Pro puts onto the DVD.
If possible, I would recommend the former, just because it's easy and doesn't depend on extra software.
Matt

Remove default classification from SAP documents (CL24N / CV02N)

Hi gurus,
I've this scenario I need to solve.
Via Customizing, I've linked a class document with a Class. (Transaction DC10).
After that, when I create a document, a class is assigned by default, according with this previous customizing.
However, we've noticed that we need to remove this default classification in some documents, but just in some of them.
It is possible to delete this assignation? I've tested with CL24, CV02N, and the result is not good at all.
How can I delete his relation between classes and documents definitely??
A lot of thanks!!!

Hi
Do not assign Default Class in dc10. Make the indicator Classifcation optional entry in field selection and in cv01n / cv02n use classifcaion tab , find the class and add to the dir wher ever needed.
Regards
Aby

How to add a record in document library without upload file.

Hi,
how to add a record in document library without upload file?
Is it possible? I want to create a folders in Document Library but inside folders i do not want to upload a file instead of just i want to create a record. I will map my local file path to the records.
Can anyone help me on it?
Thanks & Regards
Poomani Sankaran

Hello Sankaran,
document library is to upload documents, without document you will not be able to add a record or Item to it.
for your requirement you can use a list and enable folders within the list and maintain the local path of the file as an item in list.
http://www.sharepointbriefing.com/spconfig/article.php/3834951/Enable-the-New-Folder-Creation-Option-in-SharePoint-Custom-Lists.htm
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Error while creating measurment documents for a counter (counter based strategy Plan)

Dear Experts
Pl suggest the possible solution for below case
I have a counter based preventive maintenance Plan of 100km, 200km,..... with op1,op2,..... respectively.
Now I have done maintenance for 600 km and going to enter another reading in IK11.
Here, system is giving error
Counter reading in doc. 251591 larger than in subsequent doc. 251585
Message no. IR171
Diagnosis
No counter overflow reading has been defined for the measuring point, and the counter reading that you have entered is larger than the one in the subsequent measurement document.
This is not allowed, since the counter is not marked as running backwards.
System Response
Processing will not be continued.
Procedure
Check your entries and the counter data of the measuring point.
screen shot for measurement document earlier created is as

Hi Akhilesh
okay . I have not found any error in my last and current reading date and time
screen shot is attached again here for ur reference
now, what thing I have to checked, pl suggest.

Is it possible to add value item and non stock item in one billing?

Is it possible to add value item and non stock item in one billing?

Hi,
Yes,it is possible .Take example of service scenario,where material used in servicing and service charges(labour) can be billed in single invoice.
Billing document type,Customer and other header data should be same.
Reward points if useful
Regards,
Amrish Purohit

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

As it's a feature asked several times, maybe it will be available in the next version.
I don't know features available in Excel.
Sometimes ago I posted an AppleScript which may perhaps fit your needs.
If you insert in a table pathnames of files stored in your HD, select the cell, trigger the script, open the file.
Here is an updated version :
--[SCRIPT open_a_file]
Enregistrer le script en tant que Script : open_a_file.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Library:Scripts:Applications:Numb ers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la cellule contenant le chemin d'accès
Aller au menu Scripts , choisir Numbers puis choisir “open_a_file”
ouvre le fichier.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: open_a_file.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select the cell containing the pathname
Go to the Scripts Menu, choose Numbers, then choose “open_a_file”
open the file
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/02/02
2011/04/28 - replaced the getSelParams handler by the get_SelParams one
--=====
on run
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set maybe to value of cell rowNum1 of column colNum1
          end tell -- Numbers
          tell application "Finder" to open maybe
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on decoupe(t, d)
          local l
          set AppleScript's text item delimiters to d
          set l to text items of t
          set AppleScript's text item delimiters to ""
          return l
end decoupe
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Oops, I forgot that you are asking about Numbers '08 which hasn't AppleScript support.
Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 16:26:39
Please :
Search for questions similar to your own before submitting them to the community

Is it possible to add a field in Attachment screen?

Hello Exports,
I wan to know is it possible to add a customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
David

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

Is it possible to display a native pdf document in AIR?

I'm not that familiar with AIR but i was wondering if it's possible to display a native pdf document in AIR. If so are any add-on's required or does AIR have that capability built in. Essentially I would be trying to create a pdf viewer in that allows users to markup documents and save them to the server for others to view. I'm just in the discovery phase of this project, so any guidance would be great.
Thanks!

You might want to go through http://livedocs.adobe.com/flex/3/langref/flash/html/HTMLLoader.html
Create a file url for the pdf you would like to load & open it up in HTMLLoader component.

Is it possible to add pic/diagram to SP file with link to another SP file?

Hi,
Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file
so that, when the diagram/table in the source SP file updates, my SP file also updates accordingly.
For example:
Instead of:
       The diagram is located in:
       link
I would ideally like:
       Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
       The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
       file will only contain a diagram, picture, or table)
Any suggestions are welcome.
Thank you very much.

Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file so that,
when the diagram/table in the source SP file updates, my SP file also updates accordingly.
For example:
Instead of:
       The diagram is located in:
       link
I would ideally like:
       Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
       The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
       file will only contain a diagram, picture, or table)
Any suggestions are welcome.
Thank you very much.

Problem while automatic creation of measuring document

Hello everyone,
my client requirement is to track the usage hours of the PRT used for maintenace order.
i have created the PRT as equipment with category P and assigned measuring point(counter) in the default values.
Then the PRT is assigned in the operation of the breakdown maintenance order,so when i tried to confirm(IW41) the operation(to which PRT is assigned) the measuring document is not created automatically.
Please let me know if ant setting needs to be done.
Thanks in advance
Santosh

Hello,
Can anyone let me know whether this is possible in PM module as i know it works in PP.
Thank you
Regards
Santosh

Is it possible to add a url/href to the MM_swapImage funtion?

I have a bit of code I created in Dreamweaver CS3 about 3 years ago that I am revisiting/updating. It has a simple html picture gallery that uses the MM_swapImage function with the onclick command. Basically, there are a few thumbnails with a larger picture on the left. When a thumbnail is clicked, the larger image on the left changes. I'd love to add a link to the new larger image, but I can't think of a way to make this possible using this code. It isn't too important but if anyone has any ideas, I'd love to hear them.
Here is the code:
HEADER:
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
BODY:
<img src="../images/THUMBNAIL.jpg" width="73" height="98" title="TITLE" onclick="MM_swapImage('li1','','../images/NEW_IMAGE.jpg',1)" />
In that code, the 'li1' is the image that gets replaced and the 'NEW_IMAGE.jpg' is the one I'd like to have a url/href attached to.

Also, and I'd imagine the technique would be similar, would it be possible to add a title attribute to the new image?

CS/SD - Link from transactions: Measurement Document x Notification?

Hello all,
vs: SAP ECC 6.0
I need to create the following Customer Service process:
It is created Measurement Document based on a counter reading. For that we use transaction Measurement Document (tcode = IK11/ IK12 IK13)
Process I need to create:
From each Measurement Document we must create a Sales Order (tcode = VA03).
Relation One to One - 1 Measurement Document will generate 1 Sales Order.
From Notification transaction (IQS2), it is possible to create a Sales Order. That is fine! Then I am thinking to use this functionality.
My question is:
How is done the LINK from transaction Measurement Document (tcode = IK12/ IK13) to transaction Notification (IQS2), Is there any standard solution (transaction) to do that link?
Many thanks in advance,
Barbara
Edited by: Barbara Barbos on Sep 18, 2008 5:26 PM

Wow Stephan,
Many thanks for your answer.
I already tried and YES....
- from create Notification transaction (IW51), I created tha Measurement Doc and after this I created the Sales Order from the same same IW51 transaction.
100% helpfull answer.
Thanks again & regards,
Barb

Possible to add classification to Measurement Document

Similar Messages

Maybe you are looking for