Possible to add maps to iMovie'11?

I would like more maps in iMovie. Is it possible to add others taken from scanned images, or other sources such as Google Maps?

rebbit wrote:
Is it possible to triple layer in iMovie '11?
short: no
long: yes
prep layer#1+#2 in a project, export, re-import into 2nd project, add layer #3

Similar Messages

  • I wish to export several still images from iMovie as JPEG or TIFF. Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to add a freeze frame to extract the desired frame but I can't export it. Thanks.

    I wish to export several frames from iMovie as if they were images (like JPEGs or TIFFs). Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to 'add a freeze frame' to isolate the desired frames but I can't export it. Thanks.

    Ach... I found a solution thanks to previous posts which came to light after I'd posted what was obviously a question that had been asked before.

  • Possible to add Multiple Destinations on WORLD MAP?

    Can I add multiple destinations in 1 world map in imovie? Or only the Start and End location? Thanks

    You cannot have multiple destinations in a single map, but you can go from point A to point B to point C to point D, etc. You do this by putting several maps adjacent to each other. So the first map is A to B. The second is B to C. The third is C to D, etc.

  • Is it possible to add credit/ debit memos fopr exisable goods.

    hi all,
    Is it possible to add credit and debit memos for excise items. I know that debit memo is not directly available in SAP B1.
    how can we map this?
    thanks and regards,
    Yeshwanth

    Please check this thread for your info:
    Re: A/R Credit Memo & A/R Debit Memo
    Thanks,
    Gordon

  • Is it possible to add a filter to a webapp without declaring it in web.xml

    Hello,
    I'd like to add a filter in my web.xml file, but without declaring it in my webapp.
    Indeed, I have multiple webapps, and I'd like to have a common web.xml file that should be directly included in all the webapps including this package ?
    Is it possible or not ?
    As for JSF, it is possible to add faces-config file by putting it in the META-INF of the package.
    Thanks in advance.
    bgOnline

    Your title and your question are opposites...
    A filter must be specified in a web.xml to be used. That doesn't mean the Filter's class HAS to be in your webapp, it just must be accessible to the Servlet container (you could place it in the common/classes directory or shared/classes directory or even the server/classes directory).
    I've not tried it, but I see no reason why you couldn't declare the filter and filter-mapping in the server's web.xml which would then filter all requests in all webapps.
    HTH.

  • Is it possible to add an OS to solaris multiboot sytem?

    Hi
    Thank you for reading my post
    Is it possible to add an OS to solaris Boot system?
    for example Solaris X86 is installed on SATA Disk number 1 and Windows is installed on Sata Disk number 2.
    System boot on Solaris Hard disk and I want to add an option to boot the system with Windows OS which is installed on other Hard disk.
    Can you please explain the steps and mechanism to do this?
    Both hard disks are SATA and i am using latest Solaris express Developer edition.
    Thanks

    edit /boot/grub/menu.lst
    example:
    #---------- ADDED BY BOOTADM - DO NOT EDIT ----------
    title Solaris Express Developer Edition 9/07 snv_70b X86
    kernel$ /platform/i86pc/kernel/$ISADIR/unix
    module$ /platform/i86pc/$ISADIR/boot_archive
    #---------------------END BOOTADM--------------------
    #---------- ADDED BY BOOTADM - DO NOT EDIT ----------
    title Solaris failsafe
    kernel /boot/platform/i86pc/kernel/unix -s
    module /boot/x86.miniroot-safe
    #---------------------END BOOTADM--------------------
    # Unknown partition of type 6 found on /dev/rdsk/c0t0d1p0 partition: 1
    # It maps to the GRUB device: (hd0,0) .
    title Ubuntu
         rootnoverify (hd1,0)
         chainloader +1
    # Unknown partition of type 131 found on /dev/rdsk/c2d0p0 partition: 1
    # It maps to the GRUB device: (hd1,0) .
    title Windows
         rootnoverify (hd1,2)
         chainloader +1

  • Is it possible to add multiple  songs to a slide show?

    Hi there.
    A slide show can be quite long as you all know and the same music continusly repeated can become boring.
    Is it possible to add several songs to the slide show to overcome this problem?
    Regards.

    One thing you can do to make it all turn out even--think about how long each slide is going to display, say you want about 3 seconds per slide, multiply by the number of slides, say you have 100 slides (I picked those numbers so the arithmetic would be easy!). That's a total of 300 seconds. Divide by 60 seconds per minute to get the number of minutes, in this case that would be 5 minutes. Then when you make your playlist in iTunes find music that fits the mood of the show and that totals a little more than 5 minutes (and is NOT Protected, as Terence mentioned). Back in iPhoto select your Playlist in the Music section and then check the box to have the slideshow fit the music, and iPhoto will adjust the display time so that everything runs the same length of time. Export to iDVD and burn your disk.
    Personally, I like to get a little fancier, so I export my slideshow without sound, then open the project in iMovie HD and make a layered soundtrack, where I arrange the music and sound effects, as in this one:
    http://homepage.mac.com/francines/.Movies/kenstr.html
    It has the music, plus a coffee gurgle, birds tweeting, page flips and a lion roar at the end. Once it's built you can send it to iDVD at full size and/or, as I did here, make a small streaming web version to share over the Internet. I wrote up a VERY short tutorial on this (notes from a workshop I ran) and put it up here:
    http://pinkmutant.com/smug/psws06/bling.html
    Afraid I haven't worked that much with iMovie 08, but I believe you can do something along the same lines.
    Francine
    Francine
    Schwieder

  • How to add watermarks in iMovie ´09

    Hi
    I'm editing my videos in iMovie and I'm able to do lot of things there but I don't find a option where I can add a watermarks (text) to the video.
    There is a possibility to add titeles, overlaps, music and pictures in iMovie but I can't find any text or watermarks. I have only the the "stipes" in titels which shows in the lower border of the video, but I don't want that. I want "text hanging in the air".
    Where to do this?

    If you just want a title hanging in mid-air, I would just drag the Centered title over the entire project (the entire clip will turn blue to show where the title is). Highlight the text to change it, then click on *Show Fonts* where you can change the color. Choose a light gray and it will look like a watermark.
    Another way to do this is to import a still image over your entire project and set the opacity to low, which gives a watermark or ghost effect.

  • Possible To Add Chapter Markers To iDVD Slide Shows?

    Is it possible to add chapter markers to iDVD slideshows, or is that only possible in movies?
    I have a slideshow prepared with over 300 photos, and would really like to be able to create chapter markers [starting points] so a viewer doesn't have to click through so many photos to find a particular photo. This probably cannot be done, but I didn't want to proceed with my project, IF it is a possibility, and I am just missing some quick way to do this.

    The only way to create chapters in a slideshow is to create the slideshow as a movie in iPhoto or iMovie. This way you can create Chapter markers that will show up in menus.
    Each slide in an iDVD created slideshow is actually a different Chapter - that's why some set-top DVD players drop the audio on slide changes and why each slideshow can only have 99 slides.

  • Add chapters with iMovie for iOS

    Hi
    Is it possible to add chapters to a movie using iMovie for iOS. I will like to import a mp4 movie file to iMovie on my iPad and add chapter markings so that it's easier to navigate when I  play it on my Apple TV. Is this possible?
    Thanks
    Fresh1

    No.

  • Why can't I add transitions to iMovie 11?

    Hi. I am using iMovie 11 to edit a video. I want to add transitions, but every time I go to content library, "transitions" is greyed out. All the items in the content library are greyed out, actually. My movie doesn't have a theme, so nothing automatic is activated. It doesn't matter if a clip or section is selected or not - I cannot add transitions. Does anyone know any possible reasons for this and how to remedy it? Thanks!!

    Hello, AmezLady.  
    Thank you for visiting Apple Support Communities.
    I understand that you are unable manually add transitions.  This sounds like you may have automatic transitions enabled.  Try disabling this to see if you can manually add them.  
    iMovie '11: Add transitions between video clips
    http://support.apple.com/kb/PH2218
    Cheers, 
    Jason H. 

  • Is it possible to add new mappings for SRM?

    I am looking to replicate some of the "Request for Quotation" creation/management functionality from SRM in a custom application (for business/technical/ease-of-use reasons) and send the created RFQs over to SAP SRM. Can I use XI to send RFQs into SRM (I know I can retrieve them using XI for custom supplier apps, but can I send them in as well)?
    While reviewing the EBP mappings in Integration Builder, I see there is a mapping for RequestForQuotation_Create_Out, but not for RequestForQuotation_Create_In. Is it possible to add this mapping? Or in other words - <b>is it possible to create new mappings for SRM in XI that are in addition to the standard mappings that are shipped with SRM/XI? </b>
    Thanks for your help in advance.

    Hi Osvaldo,
      <i>I see there is a mapping for RequestForQuotation_Create_Out</i> --> I dont think you can find a mapping for the same. RequestForQuotation_Create_Out should be the name of the interface(outbound). What it means is you can have your own custom defined inbound interface and perform the mapping on your own in a new SWC. Pls update me if you can see a mapping for the same. Also you can have yor own interfaces and mapping in your SWC apart from the standard as suggested by Bhavesh and Abhy.
    Take care while desingning the interface for SRM part coz SRM has the ability to output in XML format. Check this functionality first and start designing your interface.
      Update us if you have more querries.
    Regards,
    Jai Shankar.

  • Is it possible to add markups to a PDF that I am not the author of

    Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me).  I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
    In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.  
    Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review. 
    Well, there is no Comments selection in my toolbar.   Second method is given by
    Quickstart: Start an email review
    An email-based review lets you track review status and merge received comments into the PDF.
    Click Review & Comment and choose Attach For Email Review.
    If prompted, enter your identity information to create a reviewer profile.
    Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
      If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
    But there is no Review & Comment button to click.
    So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
    Thanks in advance for your response.

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How do I move a music file in iTunes on my PC onto my iPad to add to an iMovie project?

    How do I move a music file in iTunes on my PC onto my iPad to add to an iMovie project?

    CBellC-
    I do not have iMovie, so I can't try this!
    Run iTunes with your iPad connected to the computer, either by the USB cable or by WiFi.  Select the iPad under DEVICES in iTunes.  Click on Apps at the top of the window and scroll down to File Sharing.  If iMovie appears there, select it.  The Documents window to the right is where you transfer files to (Add) and from (Save To) the iPad.
    Fred

Maybe you are looking for