Possible to anchor applications to screen similar to Notification Center behavior

Is there way to anchor applications to screen similar to the way Notification Center anchors itself to the right edge of my screen?
Sample use cases:
- Anchor Messages app to the right side of my display during active chat sessions
- Anchor Calendar app to the right side of my display during planning sessions

Hi,
As far as Messages is concerned it depends which window.
The Main Messages window (Window Menu > Messages or CMD + 0) will stay anywhere you put it for the tabbed chats and Interface actions.
The same with Buddy lists if you prefer the "iChat way" of starting Text Chats and Video or Audio Chats.
Outgoing Video chats and Audio Chats will also be remembered as to where you put them.
However incoming Invites are preset and you cannot change them.
Video ones are always top centre (where most people have an Internal Camera)
The Audio one tend to be Top Right below Spotlight in the Menu bar.
Text Chat invites used to also be here in iChat.
I don't use Calendar myself.
My understanding is that it has less windows.
It too should stay where it is put.
9:13 pm      Tuesday; February 25, 2014
  iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

  • Email alerts not displaying in notification center on lock screen (iOS 7)

    Hi,
    I am having issues receiving email alerts in the Notification Center when accessed from the lock screen.  I don't want to see the alert directly on the lock screen, only in the notification center.  Here are my settings:
    So basically, the Notification Center is allowed on the lock screen, but the alert itself will not be displayed on the lock screen.  However, when I get a new email, it does not display an alert.  If I unlock the phone, and check the Notification Center, the alert is there.  If I turn the "Show on Lock Screen" setting on, then I do in fact get the alert both on the lock screen and the notification center.  What is really weird is that if I check the Notificaiton Center from the lock screen (where nothing is displayed), and then unlock the phone the alert is no longer in the Notification Center, as if I had already accessed it. 
    What is also strange is that these exact settings work perfectly fine for texts and fairly consistently for my personal email.  However, it has never worked for my work (Exchange) email.  In both cases I am using Push. 
    Is anyone else able to replicate this issue, or do you have a solution?
    Thanks,
    Aaron

    Still an issue for me in 7.1

  • I wish an Ipad. Is it possible to work on the screen with 2 application toghether (2 Pages file in the same screen view) ?

    I wish an Ipad. Is it possible to work on the screen with 2 files toghether (ex: 2 Pages files in the same screen view) ?
    I need to make some transalations and so it's important for me to have the english text and the italian version that I am making, on the same screen view.
    Thank You.

    No. You cannot work on two Pages files in the same window. It is not possible to have multiple windows on the screen at the same time in iOS.

  • Is it possible to perform a print screen from an af:commandButton?

    Is it possible to perform a print screen from an af:commandButton?

    You have a program in your applications/utilities folder called "Grab". Open it and you can copy an entire screen or a selection and save it into various formats. (I.E. Jpeg image).
    or.........
    • To take a picture of the whole screen, press Command-Shift-3.
    • To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
    • To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
    • If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
    • Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document
    Cheers!
    DALE

  • Is it possible to install application icons on the...

    Is it possible to install application icons on the Nokia 5800 desktop, the first screen?
    Thanks
    Johnnie

    Yes for few, No for many. Only few applications does it by default ex: handy taskman, ybrowser etc. Other apps goes into the applications menu, you can very well organise those to be on the menu, go to applications > options > organise drag the icon and put it in the root folder.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.
    Mark

    What was the answer to this excellent question, please?
    Mark
    Student
    Posts: 1
    Registered: 05-14-2009
    0
    Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
    Options 
    05-14-2009 06:56 AM
    Hi
    When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
    I took a look at the PPD and found the following:
    *%=== Halftone Information =================
    *ScreenFreq:  "106.0"
    *ScreenAngle: "45.0"
    *ResScreenFreq 300dpi/300 dpi:  "60.0"
    *ResScreenAngle 300dpi/300 dpi: "45.0"
    *ResScreenFreq 600dpi/600 dpi:  "106.0"
    *ResScreenAngle 600dpi/600 dpi: "45.0"
    *ResScreenFreq 1200dpi/1200 dpi:  "180.0"
    *ResScreenAngle 1200dpi/1200 dpi: "45.0"
    I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
    My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
    Thank you.

  • Is it possible to change application state from a component?

    I was wondering if it is possible to change application state from within a custom component and if so, what would the syntax be if I had an application named "zzz" and I wanted to change the app state from "state1" to "state2" from my component?
    Thanks!

    Hi,
    you always have a static class Application.
    Application.application will be the root component. After that you can change it state.
    Application.application.currentState = "state2";
    But it's not the best way to change states. It's better to dispatch events from components and change states in listeners.

  • Is possible to install Application server 7 on SuSE linux 9.0

    is possible to install Application server 7 on SuSE linux 9.0

    Actually, this might not be the case since version 7 is based on native implementation of web container while version 8 is based on Tomcat (i.e. pure Java implementation). So, version 7 will definitely be more prone to platform specific issues.
    Just something to have in mind...

  • Hi, can anyone please tell me if it is possible to download Google chrome (or similar) on the New Ipad... Thanks!

    Hi, can anyone please tell me if it is possible to download Google chrome (or similar) on the New Ipad...
    I keep getting an a message that reads "Safari cannot download this file" ... is there any other browser that can run on the New Ipad
    Thanks!

    You can't download programs via Safari. The only programs (i.e. apps) that you can install are those that are in the iTunes app store on your computer and the App Store app directly on the iPad - PC and Mac programs are not compatible with the iPad, they are different operating systems.
    There are a number of browser that are available in the store e.g. Atomic Web and iCab Mobile are two of the most popular, and there is also a free Opera browser (though what is available in the store may depend upon what country that you in and therefore what is available in your country's store).

  • Is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes

    is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes ?
    it would be very important to put the data from iphone 5 to my new 5s ..
    looking forward to get some help
    thx

    You cant unlock your phone unless you put in your password. It may be possible that the apple store could do something about it.

  • WD application-selection screen - Parameter passing error

    Hi,
    In my WD application selection screen I am using a parameter(COSP-VERSN)
    When i read this using read context i am getting an error saying "Could not find attribute KOKRS"
    In context I have created a node with COSP-VERSN. My Kokrs will be contstant everytime.
    For getting my version I need to pass KOKRS values.How can overcome this issue?
    Here is the read context for versn which I have created in context Create-> NODE Option
    DATA lo_nd_pversn TYPE REF TO if_wd_context_node.
          DATA lo_el_pversn TYPE REF TO if_wd_context_element.
          DATA ls_pversn TYPE wd_this->element_pversn.
    *     navigate from <CONTEXT> to <PVERSN> via lead selection
          lo_nd_pversn = wd_context->get_child_node( name = wd_this->wdctx_pversn ).
    *     get element via lead selection
          lo_el_pversn = lo_nd_pversn->get_element(  ).
    *     get all declared attributes
          lo_el_pversn->get_static_attributes(
            IMPORTING
              static_attributes = ls_pversn ).
    Rgds
    Vara

    Resolved myself by creating a custom Dropdownbykey.
    Rgds
    vara

  • Camileo S20 - Is it possible to turn off the screen?

    Is it possible to turn off the screen when using Time Lapse or Motion Detection modes so as to save power?

    Hi buddy,
    I have downloaded the user manual off Camileo S20 and searched a little bit but unfortunately I can find no informations about turning off the screen when using Time Lapse or Motion Detection. It seems that the screen is always on.
    But you can connect the AC adaptor while recording movies. So you have always power. :)

  • Is it possible to debug the selection screen???

    Hi Frdz,
    Is it possible to debug the selection screen.
    eg: if i want to know what is happening in PBO and PAI modules of the selection screen i am not able to debug that.
    Even in code if i click on MODULES present in PBO and PAI modules it is saying MODULE doesnot exist!!!!. So i can't put the break point. even if i press /h it will go to Report events like INITIALIZATION, AT SELECTION-SCREEN but not PBO and PAI modules!.
    Also what is the meaning of exclamatory mark here(Before select option name)
    MODULE !SO_UDATE.
    MODULE !SO_UNAME.
    Thanks,
    Vinod.

    Hi Vinod,
    Double click on the module and then put the break point for the first statement of it. It will work.
    Reward points if useful.
    Thanks,
    Khan.

  • Is it possible to print the current screen in Module pool program(Dynpro)?

    Is it possible to print the current screen in Module pool program(Dynpro)?
    I create a Module pool program , and customer hope can print the screen when they click print button, Is it possible?

    Does the customer want a screen shot or what? Please elaborate on your requirement.
    Maybe you should create a smartform first, which is called when one clicks on print button. But in fact, we need a bit more info than this.

  • Is it possible to change Application Module at runtime?

    Hi all!
    I'm trying to change Application Module for my page at runtime. I've used such code:
      public void processRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processRequest(pageContext, webBean);
        OAWebBeanContainer webBeanContainer = (OAWebBeanContainer) webBean;
        webBeanContainer.setApplicationModuleDefinitionName("mypackage.MyAM");       
        webBeanContainer.setApplicationModuleUsageName("MyAM");
      }but I see that Application Module haven't been changed.
      public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processFormRequest(pageContext, webBean);
       System.out.println(pageContext.getApplicationModule(webBean).getFullName());
       System.out.println(pageContext.getApplicationModule(webBean).getDefFullName());   Is it possible to change Application Module at runtime?
    How can I do it properly?
    Pavel

    The AppModule for a page is configured in an attribute of the root element of that page. Maybe that attribute is available at the OAWebBean parameter in processRequest.

Maybe you are looking for