Possible to batch edit signatures?

i've had a change in email address, and all of my sixty-some signature files has the old address in it. i would surely like to keep all of them as is, other than changing the email address. is there any way to do this without going through them one at a time (ugh)?
thanks!

Hi there Sobeck,
If you're lucky and your plist is ASCII, open this file in ˇext Edit...
/Users/Your Username/Library/Mail/Signatures/SignaturesByAccount.plist
Search & Replace the @old.net part with @new.com part. Then Save it.
PS. I'd make a backup copy first.

Similar Messages

To batch edit , with our lift and stamp

is it possible to batch edit all my images with AUTO level, so that each pic will be edited independent RATHER than lift adjustment and Stamp the same adjustment , which will not work cause each pic needs a different level and white balance,,

I don't want to delete any of the IPTC info.
I just want to lift Caption from IPTC and leave any other IPTC info untouched in both images (lifted and stamped)
So the image I'm lifting has a different provider from the one I want to stamp but the should all have the same caption. How can I only lift and stamp the caption?
thank you

Possible Bug - Photoshop CS6+Windows 8 Batch Editing

Hello Everyone,
I have spent hours trying to figure out this issue. I use photoshop as my recommended image software editing program. I do a lot of Android Development from maintaining roms to making themes for the android device. I am attempting to batch edit over a thousand png files at a time using photoshop cs6 on windows 8. The issue I have is when batching, the 1st 10 images save and close and the rest stay open, eventually causing photoshop to crash or causing me to reboot my computer due to 2000mb of memory used from open images. I was just wondering if this was a bug or if I am doing something wrong, the images turn out great, just would like the images closed when finished in photoshop, thanks.

Hello Everyone,
I have spent hours trying to figure out this issue. I use photoshop as my recommended image software editing program. I do a lot of Android Development from maintaining roms to making themes for the android device. I am attempting to batch edit over a thousand png files at a time using photoshop cs6 on windows 8. The issue I have is when batching, the 1st 10 images save and close and the rest stay open, eventually causing photoshop to crash or causing me to reboot my computer due to 2000mb of memory used from open images. I was just wondering if this was a bug or if I am doing something wrong, the images turn out great, just would like the images closed when finished in photoshop, thanks.

Is it possible to add a signature box on the bottom of forms?

is it possible to add a signature box on the bottom of forms?
We have a customer who is thinking of using forms, but needs a signature box to be included in the form is this something that can be added?

Hi,
Unfortunately, Adobe FormsCentral does not have an option to add signatures.
In order to distribute forms requesting signatures, you may use the following Adobe products:-
Adobe Acrobat:- PDF creator, edit PDF | Adobe Acrobat XI
Adobe EchoSign:- Electronic Signature Software, Digital Signatures | Adobe EchoSign
Regards,
Nakul

Batch editing ratings problems (Beatunes related)

Is there a windows script that would enable to batch edit ratings in both the iTunes library, and within each mp3?
Secondly, is there a way to enable half star ratings in the latest 64bit version of iTunes (running on 64bit Windows 8.1 Enterprise)?
I've never used half star ratings on my iTunes library, and upon reading, am not certain if this is possible anymore.
For the last few months, I've been using Beatunes to organize my large sized iTunes library, but seem to have hit some glitches related to ratings.
In short, when I access my Itunes library via Beatunes, about 5000 songs appear to have "1/2" in the rating field.
Itunes library seems to see these songs as having no rating.
Beatunes does not allow ratings to be edited, and since the 1/2 is not seen in iTunes, I would select all those songs and use an empty tag (such as "Show") and designate the value as "Half". In iTunes, I would then select the "Show" column, and highlight all the songs with "Half" in the "Show" column, right click, and change the rating value for all songs. For testing purposes, I changed all songs to have 2 stars. When I sync the Beatunes database to the iTunes database, eventually the Beatuens ratings change to 2 stars (sometimes, it takes a few syncs).
I would then go back to iTunes, right click on all selected songs, and change rating value to "None". Most ratings change to empty values, while some decide to take on hollow star values, which is really really annoying.
I then used Steve MacGuire's ClearTrackAutoRating script on those selected tracks:
http://samsoft.org.uk/iTunes/scripts.asp
When I sync the Beatunes database with the iTunes database, the songs I had rated 2 stars go back to "1/2" rating, and not an empty field.
I can't figure out what is triggering this.
I've started a thread in Beatunes forum (http://help.beatunes.com/discussions/problems/40759-half-star-ratings-problems), but figured I would start one here to ask for advice, or see if there are any other scripts I should consider trying. At this time, I have not heard back from the developer, as I just posted it a few hours ago.
One of the things I just tried doing was enabling iTunes to use half star ratings (so i could see the 1/2 rated songs would then show), but I have not been able to figure out how to do this. The most common way of altering iTunesPrefs.xml did not do anything for me:
http://blog.beatunes.com/2011/08/showing-half-star-ratings-in-itunes.html
http://www.instructables.com/id/How-To-Enable-Half-Stars-In-Itunes/
Hence why I was wondering if this hack still works on 64bit version of iTunes (running on 64bit Windows 8.1 Enterprise).
I also came across this:
http://www.nextofwindows.com/interesting-tip-how-to-enable-half-star-rating-in-i tunes-in-windows/
They suggest adding:<key>storefront</key> <string>143441-1,12</string> at the end of iTunesPrefs.xml
This is confusing, because my prefs already contain the following at the end:
<key>storefront</key> <string>143455-6,17</string>
Am I supposed to keep my existent, and just add after, or do I replace what is there?
Any help/advice would be very much appreciated.

Hi there...
I've had a quick check and the iTunesPrefs.xml hack works for me to enable half-ratings. Tested on iTunes 11.1.5 running on Windows 7 32-bit, but no reason to expect platform differences. This build displays ½ rather than a half-star. Once enabled you can set half-ratings via the iTunes interface. I haven't set back yet but presumably they will disappear if I do.
The album and track ratin properties take a value from 0% to 100%. If 0% iTunes will offer a track-auto rating based on any manual album rating and an album auto-rating based upon manual track ratings. My scripts set a manual rating of 1% which iTunes treats as less than ½ and so displays as no rating, but it suppresses any auto-rating. Presumably Beatunes is treating anything from 1%-10% as ½ star, 11%-20% as 1 star, and so on. For iTunes from 0%-9% is no stars, 10%-19% is ½ star, 20%-29% is 1 star, etc., with bigger ranges when half-ratings are not enabled.
My scripts page already has ResetAlbumAutoRating and ResetTrackAutoRating scripts if you need to remove those 1% values, or you can simply set a new rating and then remove it.
What additional batch rating task do you have in mind?
tt2

Using Actions in batch editing??

Is there any way to use Actions in Batch Editing in Photoshop Elements 10 or any Elements?? Thanks!

No, this is one of the lines adobe has drawn to differentiate between PS and PSE. In PSE you can only run an action on one file at a time, not on a folder as in PS. It might be possible with an add-on like elements+, which claims to allow scripting for batch processing, but I've never tried that. Perhaps someone else will know for sure.

Batch edit photos coming from iPhone 4s

I use iPhoto and iCloud to gather and organize photos taken with my new iPhone 4s. It works really well apart from the fact that when compared to pictures taken with my DSLR the iPhone photos are too "warm". I would like to make a standard adjustement of the temperature for all photos coming from the iPhone. Is there a way to do this in iPhoto, with a batch edit f.i.? If not, are there other tools that can help? I would like to keep the workflow as simple as possible. All suggestions are welcome.
Tx,
Eric

http://www.feroxsoft.com/ibe/index.php.en
might help.
Regards
TD

Batch Editing with Photoshop Elements 4.0

I have an folder of photos which I would like to resize as a batch with Photoshop Elements 4.0. However, I am at a loss as to how to do it and am missing a step or two in my workflow.
I would appreciate any specific step by step suggestion that you may have.
Thanks for your help.
Vernon

not for "batch editing"
You can set PSE as the external editor in the iPhoto preferences. iPhoto has the capability to directly interface with any external editor - simply go to the iPhoto preferences (iPhoto menu ==> preferences ==> General and set the Edit photo option to in external editor - select the desired external editor and you are set - now when you edit photos they are sent to the selected external editor and when you are finished editing you save (not save as) and the edited photo is returned to iPhoto, the original is maintained in iPhoto and the iPhoto database is correctly updated.
If you want the option of editing in either iPhoto or the external editor after selecting your external editor simply set the edit in back to main window - now when you right click (control Click) on a photo you will get a menu which allows you to select either.
LN

Batch Editing in Photoshop CS4

Hey guys, i want to batch edit image from aperture using CS4. Specifically I have an action set up that changes size an applies logo. My query is, how to I tell CS4 that i want to batch images from Aperture? Without exporting to desktop or whatever from Aperture ideally. I'm looking at doing about 300 images a batch. (In their own albums)
Cheers
Rowan

I don't know that you can batch to CS4. It's usually a one-at-a-time edit.
For batch applying a logo, using Aperture's watermarking functionality would be an easy way to do this, without having to use Photoshop.

Parking not possible during batch input

Hello,
Iu2019m facing a problem for creating a parked vendor invoice in background (Tcode FB60 / FV60) thru BDC or BAPI.
I looked for a BAPI and I just found "BAPI_ACC_INVOICE_RECEIPT_POST", for posting FI invoice : it doesnu2019t correspond to our requirements (we need to park).
Then I used "PRELIMINARY_POSTING_DOC_WRITE" for parking an invoice but when we see the parked invoice in FBV2, the displayed Tcode is like FBV1. The users want the vendor invoice header, I mean the same screen as FB60.
Finally, I tried to use Batch Input to park but I got the following message :
"Parking not possible during batch input"
Message no. FP140
Procedure
In Customizing, you can control whether an error message is issued."
I found nothing in IMG about control message
And in sdn forums, some said that bdc doesnu2019t work for an enjoy transaction (MIRO, MIR7, FB60 ..) but we already created a BDC for MIR7 and it works.
Thanks,

You can use [CALL TRANSACTION|http://help.sap.com/abapdocu_70/en/ABAPCALL_TRANSACTION.htm] like BDC.
via CALL TRANSACTION you may use [bdc options with NOBINPT |http://help.sap.com/abapdocu_70/en/ABAPCALL_TRANSACTION_BDC_OPTIONS.htm] so the systeme field sy-binpt will be initial.
You will need to manage the error messages in your program.(no SM35) one solution is to build the BDC for records with errors.
There are many threads on [difference Between Batch Input and Call Transaction in BDC|https://forums.sdn.sap.com/search.jspa?threadID=&q=differenceBatchInputCallTransaction&objID=c42&dateRange=all&numResults=15&rankBy=10001]
Regards,
Raymond

Is it possible to use digital signature in Sales order of SAP B1 ?

Hi Experts,
Version: 8.81 PL07
Cyrstal report Layout: 2011
Is it possible to use digital signature in Sales order of SAP B1 ?
Thanks in advance,
Regards,
Dwarak

Hello
Signature by scanned image is possible, you can create a function to do it. please note: images must be inside the reports, and hide them with a CR function.
For certificate based sigbature of CR is not possible, you must develop an addon for that which is do this functionality.
János

How can I edit batch edited photos from Photomatix in Lightroom?

I have been shooting some last week with my new Canon 70D in RAW and Jpeg and both come through just fine. I batch edited a series of photos in Photomtaix and imported into Lightroom and they all show up with a purple haze. They show up this way in Picasa too.
Here is a screenshot. I have exported from Photomatix as jpeg and as tiff but both look this way. Is there a setting I need to adjust in Lightroom?
Thanks!!!

If you need to transfer the photos on the iPad back to a computer for safe keeping. The app Photo Transfer can transfer unto 50 photos at a time from the iPad photo app to a computer.
http://itunes.apple.com/us/app/photo-transfer-app/id365152940?mt=8

Photoshop crashes whenever I try to batch edit.

Photoshop crashes whenever I try to batch edit. It's getting old to keep losing all my work... does anyone know how to resolve or avoid this? Thank you!

Which version of photoshop and operating system are you using?

Batch editing in Iphoto

I have 2 different makes of camera which I take on holiday.When I transfer the photos into iphoto they have different prefixes on the filename as a result of being different makes.Is there anyway I can batch edit these photos to make Iphoto recognise the date and time they were taken in order that they can be viewed in chronological order?
I know that you can do it manually by changing each individual file name but it takes forever.Ive tried using the Namechanger app but all that seemed to do was alter the metadata resulting in me being unable to drag the photos out of iphoto causing me to have to do a time machine restore of the entire library.
Any ideas would be much appreciated

I do not understand, why it is necessary to change the filenames to be able to view the photos in chronological order?
Have the cameras not been set to the same time? You can correct that by selecting all photos for each camera and using the command "Photos > Adjust date and time".
Once all photos are using the same time base, you can ad them to an album and arrange the album by date; this way the photos will be shown in chronological order.
Once you have the photos in an album in chronological order you can rename the versions using the command "Photos > Batch change > Set title to text" and enable to append a number. Then all photos will be named consistently. To change the original filenames you would have to export the images again and use the titles a filenames, but that should not be necessary.
Regards
Léonie

Is it possible to have editable text field in interactive report?

Is it possible to have editable text field in interactive report?
Thanks,
Dip

Hi,
I followed your suggestion and defined an IR with apex_item.text columns and it works fine. Now however I face a new problem when I run the page and use the standard Search Bar:
- Click on Actions/Filter
- Select a column, for example the employee name.
- Open the Expression field LOV: I correctly see the different names.
- When I select one of the names, in the Expression field, instead of the name, I see:
"<input type="text" name="f03" size="20" maxlength="2000" value="Eugene" />"
Horrible!!!!!!
Is there a way to see the name and not that expression? The same thing get downloaded, so it´s really annoying.
Thank you very much in advance for your help!!!
Regards
Francesco

Possible to batch edit signatures?

Similar Messages

Maybe you are looking for