Possible to change priority in FCP X

in Compresor 4 I get the option of setting the job priority high, med, or low. Is there a way for me to do the same FCP X when I'm exporting/encoding using FCP X.

appleconfuse wrote:
The reason I wanted low, med, high is so that I can make FCPX not max all cpu's when encoding. Ex. 
Most people want as much of their computer resorces as possble deveoted to processing their project in order to do it in the shortest time possible.
Compressor's priority affects the order that batches are procesed.
Russ

Similar Messages

  • Is it possible to change serial number in FCP?

    I have two licenses of FCP. Just installed on a new Mac Pro, and I installed with the wrong serial number (which results in protection error when both FCP programs are open). Is it possible to change serial number without reinstalling (takes hours..)?

    Further to my above comment Tom, I have done a quick test.
    Removing the FCS System ID had no apparent effect on launching FCP.
    Removing the ProAppsSystemID brought up the serial number etc. window.
    Any idea why I have got 2 of these things?
    Anything to do with having FCE installed as well?

  • Is it possible to change the frame rate of a motion template?

    Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
    Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
    If not in Motion, how else could this been changed?

    Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

  • Changing priority of concurrent request

    Hi
    Please let me know is it possible to change the priority of a concurrent request submitted by the batch user(any particular user) only.
    1)
    I know we can use the profile option but that does not serve the purpose because i dont want the priority of all the other requests submitted by that user to be changed ,just for one particular concrrent request i want this to happen.
    2)
    From system admin also it can be done but this will make the priority of that request to change so it will be the same irrespective of the user.
    Actually i want to CHANGE the priority of a concurrent request only when it is submitted by a particular user (through CONCSUB utility)and that should affect the priority of other requests submitted by that user ,they should remain as it is.

    Please let me know is it possible to change the priority of a concurrent request submitted by the batch user(any particular user) only.How the request is being submitted? Is it from the application or the OS or using an API?
    1)
    I know we can use the profile option but that does not serve the purpose because i dont want the priority of all the other requests submitted by that user to be changed ,just for one particular concrrent request i want this to happen.
    2)
    From system admin also it can be done but this will make the priority of that request to change so it will be the same irrespective of the user.
    Actually i want to CHANGE the priority of a concurrent request only when it is submitted by a particular user (through CONCSUB utility)and that should affect the priority of other requests submitted by that user ,they should remain as it is.Why don't you schedule the concurrent program from the application under that specific user and set the priority then?
    I also believe you cannot set priority if you use CONCSUB for a specific concurrent program under specific username.
    Thanks,
    Hussein

  • BUS2105 How to change priority when PR is urgent

    Hello,
    We activated BUS2105 for overall release of PR. We use three level release procedure. Our business people want when requisitioner decides that PR is urgent he to be able to change priority of Workflow message. Is it possible or not?
    Thank's

    Hmmm, as far as I know, it is possible to change the priorities (for example go to business workplace and change a priority of a work item manually. Well, there might be some problems according to the note in certain cases.
    IF the original question is that how the requestor can change the priority (and if we assume that the WF priority change will work), I would say that it is not that simple. I assume that the requestor should somehow be able to set the priority already when he saves the PR. You should find probably some user exit or BADI or do some enhancement  for the PR itself - to store the priority that the user should be somehow able to choose. Then it would perhaps be quite easy in WF to check this value and change the priority with function SAP_WAPI_CHANGE_WORKITEM_PRIO.
    Regards,
    Karri

  • Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

    I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

    No.
    There are up to six calendar weeks that might be used to display the 31 possible days in a month.
    So the month view displays six weeks.

  • Is it possible to change the ALV report layout settings in spool request

    Hi All,
    Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
    Regards,
    Jyothi CH.

    Hello,
    Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
    As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
    Regards,
    Christophe

  • Where it is possible to change the value separator in Custom Field?

    Hello,
    This is a question around the "Custom Fields" and "Lookup Table"
    I linked a "Custom Field" to a "Lookup Table".
    I select the option "Allow multiple values to be selected from lookup table"
    When I used this "Custom Field" in a view, the selected values are separated by a comma ",".
    Where it is possible to change this value?
    I saw another project server where the character is a semi-column ";" and I would like to test with ";".
    Thank you in advance
    Pascal Jean

    Hi,
    This will be triggered by your regional settings.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |
    Hello,
    Thank you for the answer.
    Do you mean the "local regional settings"?
    Because, depending on the PWA site I'm connected to I don't have the same values. I'm obviously using the same workstation.
    Regards

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • Is is possible to change the hourly interval in the weekly calendar in 4.1?

    Hi - using APEX 4.1 and having implemented a SQL calendar. All is working fine, but I would like to change the display of the weekly calendar to show 30 minute intervals, instead of 1 hour intervals. I've look in the template, but don't see any way to change it. Is it possible to change this? Thanks.

    Hi Collin,
    Could you le me know the resolution
    Regards
    Alan

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

  • Is it possible to change text colour in code view?

    Hi all,
    Not sure if this is possible as never seen it myself, but is it possible to change the text colour in the code of the html?
    A site I am building at the moment is for a school who want to be able to edit text / links occasionally, and as they will only be using something like notepad and have no html knowledge between them whatsoever, I thought if I could highlight bits in the code which are 'not to be played with' it would make everyone's job a lot simpler!
    Possible or not?

    cs6_noob wrote:
    Can the comments only go at the beginning of a line, or can they, for example go after say a <p> tag but before the page text? (If you get my meaning!)
    Eg <p><!--edit from here--!>welcome to our website<!--up to here--!></p>
    Yes, you can, but you need to make sure the HTML comment tags are correct. What you have done won't work, but this will:
    <p><!--edit from here-->welcome to our website<!--up to here--></p>
    Notice that the exclamation mark is only in the opening comment tag. Not in the closing one.
    Opening tag for comment:
    <!--
    Closing tag:
    -->

  • Is it possible to change the video card of a pavilion g7-1075dx?

    So, I have an HP Pavilion g7-1075dx Notebook with Windows 7. I'm an avid gamer and wish to play the newest games. However, there's one problem thats keeping me from doing so. Alot of the newer games require newer video/graphics cards. This particular laptop has an ATI Mobility Radeon HD 4250. The newest games seem to require ATI Radeon HD 4850 and above. This is the only thing thats keeping me from playing games like Starcraft II on the highest settings OR in the case of Star Wars: The Old Republic, it almost keeps me from playing the game, period, due to the graphics being too much for my current card to handle, causing massive lag. I was hoping I could change the video card. Upgrade. However, i've heard that with most laptops or notebooks you can't upgrade anything other than the RAM. I'm hoping anyone on here can help me out and tell me if it is possible to get a new video card for my laptop. We don't have a desktop computer so this laptop is my only hope for a long time to play newer PC games.

    Alright, let me put this in a simpler message: Does anyone know if it is possible to change the video card currently in my laptop, the HP Pavilion g7-1075dx, for a newer and better one. ATI Mobility Radeon HD 4250 to ATI Radeon HD 4850 or higher.

  • Is it possible to change the colour of box in script from black to blue

    Hi,
    Is it possible to change the colour of box in script from black to blue  or some other colour and background colour also...if so how....
    Thanks.

    No..
    It is not possible in scripts..
    In scripts u cannot use colors..
    In smartforms u can do that..
    reward if it helps u..
    sai ramesh

  • I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

    Hi people,
    I'm typing from Brasil, sorry my English.
    I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
    I intend to keep the original DVD driver and install the SSD in the same HD place.
    If yes, where I find a tutorial about this?
    And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
    http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
    What brand and model of SSD do you recommend?
    Thanks a lot for now and best regards all.
    Carlos Sgrillo
    Porto Alegre, RS, Brasil

    Tukaine
    Sep 23, 2012 10:59 PM
    Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
    This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
    Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
    When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
    If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
    Fixes people have used in the past included:
    Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
    Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
    Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
    Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
    It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
    Instead of HDDFan Control, get the free SSDFan Control
    http://exirion.net/ssdfanctrl/

Maybe you are looking for

  • Firefox 25.0.1 and Facebook have JavaScript issues

    I am using Firefox 25.0.1 with Mac IOS 10.9 on my Macbook Air. When trying to get to Facebook, I am told that I have to enable JavaScript in my browser or go to the mobile site. I am given no instructions on enabling JavaScript, nor can I find JavaSc

  • Can i install SL on external usb drive & how to transfer over existing HDD

    Hi I have a MBP with around 200Gb used on a 500GB hdd ( installed after warantee ran out ). The MBP has been working fine for a year or so now but when i tried installing Snow Leopard i found the HDD was not setup as GUID which stopped the installati

  • RE: Oracle BPM Add-in for Microsoft Office 2007

    All, Now that we have this add-in for MS Office 2007 (see http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/office_addin/index.html), we would benefit from what to do with such attachments uploaded to the workflow. For example, parse an Excel a

  • Sharepoint Audit report with all items under Data and items selected

    Hi all, We have to use following settings under SharePoint Configure audit settings. Configure audit settings => Data and Items => specify events to audit. Under specify events to audit. Select all the available options. Could you please answer my fo

  • Best workaround for using Gmail to filter POP spam?

    I have 3 POP email addresses and get hundreds of spam mails per day. Can't handle having to delete them manually on the iPhone. I tried setting my Gmail account to check my POP emails and setting up my iPhone with only my Gmail account. Now I get all