Possible to change the business Partner from a created Contract in ICWEB??

Hello experts,
I would like to know if it is posible to change the BP from a created contract in ICWEB.
I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
Can you help me, please??
Thank in advance.
Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

Hello S Reddy and a lot of thanks for your help.
But I don't know where I can select this option, there isn't the  where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
Thanks in advance.
Regards.

Similar Messages

  • How the business partner data is created in  EB

    Hi
    How the business partner data is created in EB ( SRM).
    thanks
    sankar

    Hi,
    I imagine you would like to synchronize business partner data, which are created in backend, into SRM.
    you can use Tcode BBPGETVD or BBPUPDVD or run/schedule  bbp_vendor_sync (need customizing).
    Regards,
    Bertrand

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

  • Change the Business Partner details

    Hi All,
    I have to change the credi control details and credit limt(esp. Rules) of the Business Partner (transaction is BP) depending on some creteria.
    Could you please provide any BAPI or a function module to change these details.
    Please, the BADIs which would trigger when this transaction is executed.
    Can send your guidence/solution to my mail "[email protected]".
    Thanks in advance.
    Thanks and Regards,
    Ramana Malladi.

    Murali-
    We have seen this issue in the past - if you are on SRM 5.0 a note exists to correct the action - however if you are on SRM 4.0 I think you are going to be stuck.  Anyway see OSS note 881695 - Source of supply with item changes.
    As described if you change plant(location), the product category or the unit of measure the source of supply will be re-determined. 
    We have previously requested this note to be down-ported to SRM 4.0 but the request was declined as it apparently would require significant changes.
    Hope this helps.
    Regards-
    b

  • Is it possible to change the value of "maxdatafiles" after creating a db??

    Hi, all.
    Is it possible to change the value of the followings after creating a database??
    -maxdatafiles
    -maxinstances
    -maxlogfiles
    -maxlogmembers
    -maxloghistory
    Thanks and Regards.

    Hi Chris,
    Thanks for updating that but here's what in Oracle Doc:
    From Oracle Documentation (Oracle® Database New Features Guide 10g Release 2 (10.2))
    Eliminate Control File Re-Creation
    With the control file enhancements, there is no longer a requirement to re-create the control file when changes in the configuration parameters are made. These include the MAXLOGFILE, MAXLOGMEMBERS, MAXLOGHISTORY, MAXDATAFILES, and MAXINSTANCES parameters.
    This feature eliminates database downtime when a configuration parameter change is made in the control file
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/chapter1.htm#sthref12
    Regards

  • Need to change the business partner on multiple documents (SC's, PO's, etc)

    When a user leaves the organization, their business partner number is no longer valid.  Therefore, any documents they have created are no longer accessible for changes, good receipts, etc.  We are looking for a way that we can find all open SRM documents for a specific business partner and add a new business partner number to these documents in mass, rather than having to change each individual document one by one.

    Hi Patricia,
    This will be a new business requirement. Its a Enhancement.
    So you have to take technical people's help who can help you to develope the program.
    For example, if someone leaves the org then that PO has to be transfered to someone else, so this is called as PO onwership change. With the help of this program , you can put document no and new user id and execute it. it will transfer the ownership of the PO. Mass changes is also possible.
    Also to get the Goods receipients name , you can develop prg for PO status , which will give information about relevant SC, PO , Goods receipients name, G/ L account, account assignement etc.
    Its a totally new business requirement, which can be done with ABAP.
    I hope this helps you.
    Regards,
    Sheetal Salunkhe

  • How to get the old shopping cart detail if I change the Business partner.

    Hi all ,
    Can any one help me in below describe query?
    Scenario:
    User was getting the error regarding business partner while shopping.
    So I repair the user from BBP_CHECK_USERS.
    Now definitly its business partner has changed.User can also shop.
    But the problem lies is he has lost his all the old shopping cart which was related to old business partner.
    Can any one tell me how to get those detail of the old shopping cart which was related to old business partner?

    Hi
    <b>Which SRM version are you using ?</b>
    <u>Please check out the links/pointers -></u>
    Moving workitems between SRM inboxes
    Re: How to re-instate the deleted Position of the user into Org structure.
    Re: Position Deleted for an User, created a new userid; Confirmation Issues
    Re: Need help to "access" deleted users's inbox & reassign work items
    Re: How to delete a user in the Organizational structure
    Re: Transfer of open POs or SCs?
    <b>Hope this will definitely help.</b>
    Do let me know.
    Regards
    - Atul

  • Is it possible to change the "/messagebroker/amf/", from the view of the webserver?

    I have BlazeDS integrated into a J2EE application.  All method innvocations from the Flash client flow through an Apache webserver, until it reaches its destination of the J2EE application.  The Flash client exercises several distinct methods through this BlazeDS service.
    My question is, from an Apache webserver perspective, is there a way for Apache to distinguish one method from another?  Right now, Apache views everything as a POST to the URI of "../messagebroker/amf".  The options seem to be:
    1)  Dig into the POST to find the method signature.  This seems scary given the POST has binary content.
    2)  Try to change the URI of "../messagebroker/amf" for each method.  I have no idea how to go about this.
    3)  Maybe include a method signature in the http header?  Again, not sure how to do such a thing in Flash/Flex.
    If anyone has addressed this requirement in the past, I'd be very greatful for some advice.

    Hi. I haven't heard of anyone trying to do this in the past. I'm just curious, why does the Apache server need to know what method is being called?
    I would think something like 2) you could do mostly on the Apache side. Just brainstorming here but in your client application(s) you could manually create a ChannelSet with a channel that had the method name in the uri, so for example "../messagebroker/amf/method1" and "../messagebroker/amf/method2". The apache server could then do whatever it needed to do for the individual methods and redirect all requests to "../messagebroker/amf".
    Here is a link to the BlazeDS documentation that deals with channels and endpoints. That has some information on manually creating a ChannelSet and channels on the client in case you decide to go that route.    
    http://livedocs.adobe.com/blazeds/1/blazeds_devguide/help.html?content=lcconfig_2.html
    Hope that helps.
    -Alex

  • I would like to know it it's possible to change the scroll bar from the right part of the firefox browser, to the left part and, if it's possible, how can it be done. Thank you!

    The scroll bar (the one used to scroll up and down any kind of website), that is normally in the right part of the firefox browser, would be of much help to me if it could sometimes be moved to the left part of the browser. Is this possible? How can it be done? Can anybody tell me the exact steps to take in order to do this (if it is possible of course)? This would be helpfull to me, since I think that the firefox scroll bar is overlaping the scroll part of the facebook chat sidebar, since I just can see a few people on this facebook chat sidebar and I can´t scroll along it, as I could a while ago. So my guess is that the firefox scroll bar is covering the other. In order to solve it in a simpler way, I guessed that if the firefox scroll bar could be moved to the left side of the browser, this problem could be solved. So, can anybody help me?

    http://kb.mozillazine.org/layout.scrollbar.side
    Type '''about:config''' in Location (address) bar
    filter for '''layout.scrollbar.side'''
    Right-click the Preference and Modify it to '''3'''
    You may need to reload any pages open to have scrollbar move to left after Preference change.

  • Query regarding finding Business Partner from the External Number

    Hi Group,
    I have a requirement to update Address of the Business Partner from the External Number and then using that Business Partner I have to update the Address.
    Now the question is that, <b>how I can get the value of the Business Partner by using the External Number</b>( i.e., PAN Number).[PAN No is used to get the
    differentiate the Organizations].
    So please kindly let me know how I can achieve this requirement.
    Thanks in advance.
    Regards,
    Vishnu.

    Vishnu,
    Depending on where it is stored, your first option would be use the function module BUPA_NUMBERS_GET.
    The other option is to read table BUT0ID if it is stored in the identification details of the business partner.
    Good luck,
    Stephen

  • Change in Business Partner restricted in case of Contract already activated

    Hi Friends,
    I have come across a very strange scenario which is described below:
    I have created a RE-FX Lease Out Contract , activated the same and have carried out certain number of Periodic Postings. Now i can change the Business Partner of the Contract from existing X (for example) to a new Business Partner Y (for example).
    Why would this kind of option be available in the system (I mean for what kind of Business Requirement this shall be allowed??) and how can i control that in case a RE-FX Lease Out Contract has been created and activated, nobody should be allowed to change the Business Partner in the Contract.
    Has anyone come across this kind of a scenario???
    Plz reply back with your valuable inputs ASAP.
    Pankaj

    Hi AP,
    Thanks for the reply.
    Can you tell me how can i make this field of BP Number as in Display mode in Change RE Contract???
    I mean the steps to achieve this....
    Thanks
    Pankaj

  • Is it possible to change the asset value after depreciation posted for 4 months

    Hi
    Is it possible to change the asset value from 50000 to 60000 after posting the depreciation for 4 months.
    If it is possible kindly share the process..
    Thanks
    Srikanth KVS

    1. In the explorer page, settings dialog, you can change the display format to show only name.
    2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
    a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
    b. Make a Business Rule to update Name when HierarchyName is changed.

  • Possible to Change the Order Status

    Hai
    When i am booking the sales order the status is showing the Booked is it possible to change the Booked status according to the customer requirement ....
    thanks in advance
    M.Meenashi Sundaram

    Hai its possible to change the order status from the
    setup>quick codes>order management>
    type --flow status
    we can able to change it
    thanks
    M.Meenashi Sundaram

  • Interface getting failed after changing the Business system to that service

    Hello All,
    Our Env... is XI 3.0 and this is related to produciton env.
    Based on our client requirment to change the business system from client 871 to 100 for  one of the R3 system which is reciever type(rfc).
    After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in  the system.
    The steps which I have followed to change the Business system.
    1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
    2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
    3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
    Then i saved the changes and after that i have activated that interface.
    After that when i logged into CC monitoring and viewed that service channels and see the following errors:
    Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
    Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
    Awaiting for your reply.
    Best Regards
    Rakesh Reddy

    Hello Nisar
    Thanks for the update,
    Let me say few points  about this particular problem:
    1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
    And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
    2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
    3>As mentioned by you , I have checked all the points mentioned
        i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
       ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
       iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
    I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
    It says that:
    RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
    Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
    If any information required , I can provide that.
    Best Regards
    Rakesh Reddy

  • How to Change the  business process

    How Do I change the Business process which was created wrongly for different company code? When I try to change the company code it says that currency cannot be changed as data is already posted. Since the Analysis period  is from 01/01/2008 to 12/31/9999, I am not able to select the new analysis period.
    The data posted is relatively small because it was just created 10days ago.
    Your help will be appreciated.
    mani

    If only plan data entered, try to delete the planning data before delete the object and then re-create it again. Otherwise you may have to leave it as is and change the description for the usage by the different company code.

Maybe you are looking for