Possible to choose the 256mb 8600M for the 2.2ghz Macbook Pro?

Hi, does anyone know how to get the Basic Macbook Pro with the 256Mb 8600M gt?

If I understand you correctly, this is it.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nnmm=br owse&mco=3856D31F&node=home/macbook/macbook_pro
Regards,

Similar Messages

  • Why does the fan run for long periods on macbook pro

    why does the fan run for long periods on macbook pro?

    to keep the internal components of you mac at a safe operating temperature.

  • How to change email on IPOD Touch for Facetime. I used same email for Facetime on my Macbook Pro

    How to change the Email on my IPOD touch for Facetime. I used the same email for my IPOD & my Macbook Pro. Do I need a different email for each device.

    Yes, if you want to call one device from another each must have a unique email calling address.  Go to Settings>FaceTime and add another email calling address and delete the other one after you set up the second one.
    I learned that a long time ago when I tried to call my iPod from my Mac.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • Please choose a different name for the file

    How can I stop this message appearning ?

    By choosing a different name for the file?
    You will need to provide a lot more information. 
    What are you trying to do when you see the message?
    What version of Sqldeveloper are you using?
    What operating system are you running on?

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

  • I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts...

    I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts... As long as it has the support for the service it's hooked up to?

    As far as I know there is no US cell carrier that allows pay as you go with an iPhone. You can purchase an unlocked iPhone 4S at an Apple Store and try it with a non-supported carrier.

  • I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!

    I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!
    Or if apple would work around this some way or another?

    If you bought Logic 9 less than a month ago then Apple will most likely refund you so that you can buy Logic X instead.
    The full (only) price of Logic X is as staed on the App Store. This price (whether people agree or disagree, like it or not like it) is still less than any upgrade price for any other DAW.
    A lot of people here are saying they bought Logic 9 6 months or a year ago and want a cheaper price. For me, I started on Logic 5.5. Logic 6, you could pay an upgrade price that was way over what the full app is now but you had to add costs as things like Space Designer were extra. Their serial numbers, once purchased, got added to you XS Key, which was a dongle that never got hacked in 6 and a half years.
    Apple, on acquiring Emagic, dropped the price from $1000 to $499, included all the things you had to pay extra for then dropped the price to what it is now once they went over to the App Store. They also dropped the un-cracked dongle.
    So myself and a lot of other people here went 5.5 to 6 (added the goodies that were extra) to 7 to 8 and to 9. When there was an upgrade price, the price was around what the app is now.
    I'm amazed at how many people see this as a full price and want money off whereas in reality a complete piece of softwaser is being offered for an upgrade price.
    My first paragraph will answer your question and you probably won't care about the rest of the post. $199 or £139 IS an upgrade price.

  • IOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    iOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
    You cannot play movies from ATV without itunes, which streams to the ATV.
    If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
    The next issues is speed of slowest connection.
    Your download to your home maybe great.. what is the upload speed from your office like??
    If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net..  and third to download it again.. net to home..  Sorry but it is better to play the movie directly from online itunes store.
    If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
    Overall this sounds like you need to think it out a bit more.

  • Slideshow page appears to load all images at once making it very slow. Is it possible to force it to load just the required items for the immediate page / slide

    Hi Everyone
    First post and a Muse / Web Noob.
    Im building my personal website with muse ( CC and now CC 2014 ) , its quite simple with slideshows embedded inside each other and is just 4 pages in total.
    My two slideshow pages appears to load all images at once making it very slow ( plus 20 secs on my system ). Is it possible to force it to load just the required items for the immediate page / slide. It would be so much faster and would work much better in this particular situation.
    Ive built all the images and icons at the correct size so optimisation shouldn't be an issue. The whole site is only about 42mb.
    www.paradoks.co.uk
    Many thanks
    Deck

    Oh well the problem seems to have fixed itself. It seems it was either a Java or Tumblr problem because the same thing happened when I installed Chrome. It is a lot more stable now and no more crashes yay.

  • IMovie appears to be picking a random frame from a project that it assigns as the Thumbnail/Poster for the final video that is shared via iMovie Theater.  How does it choose this frame, and is there a way to change this?  I cannot find this anywhere.

    This question was posted back in 2013, and I'll having it today. Anyone know what the deal is with the system selecting a theater image with NO way to change it--better yet--has anyone figured out a way to change it? Not a clue, do you know wherethe theater files are located on a MAC?

    I can't answer your first question.
    The default location for the imovie Theater.theater  package is in your user / Movies folder.

  • HT1386 I am trying to sync my iPod Touches calendar to my MacBook Pro calendar. I have been successful at syncing the events from my MacBook Pro's iCal to the iPod but haven't been able to sync the events from my iPod to my MacBook Pro. Is this possible?

    I have an iPod touch that I often use to manage different events for work. I have been able to sync the events on my calendar from my MacBook Pro to the iPod touch successfully using wifi. What I really need to do though is sync my iPod calendar events to my MacBook Pro calendar. Is this possible? How do I set this up? It would be a huge help if I could transfer the events on my iPod calendar to my computers calendar. I currently have the wifi sync option on and have turned on the sync calendars option in iTunes. Thank you for your help!

    For resetting the sync history on a Mac running Lion - 10.7.x if needed.
    http://support.apple.com/kb/TS1627
    If you see the Sync menu in the menu bar, skip to step 3: 
    If you do not see the Sync menu in your menu bar, skip to step 7.
    Hold the Option key on your keyboard, then click the Sync menu in the menu bar:   
    if you see the Sync menu but you are unable to open it, skip to step 8.
    Choose Reset Sync Services.
    Click Reset Sync History.
    Test for the original issue. If the issue persists, or if you are unable to open the Sync menu, follow these steps:
    In the Finder, choose Utilities from the Go menu.
    Open Terminal.
    In the Terminal window, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
    Press Return.
    Quit Terminal after the operation has completed (when Terminal returns to the command prompt with a $).

Maybe you are looking for