Possible to clear vendor open item against already posted payment document?

Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
Mike

Hi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date.  I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again.

Similar Messages

  • Payment run  - should not clear the open item but should post payment doc

    Hi Gurus,
    Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
    Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
    Appreciate your help in advance

    HI ,
    Thanks for your reply , but still I am not clear on that.
    reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
    Basically  the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
    May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
    Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
    Hope you have clear background of my req...
    Tnanks in advance ,

  • How to clear vendor open items with customer open items in APP?

    Hi Experts,
    Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'.  Still problem is not solved, hence I am requesting you to help me in this regard.
    Thank you very much,
    Regards,
    Ganesh.

    Hi
    In FBCJ after payment you have clear manually vendor balance in F-44.
    If you want SPL GL in FBCJ then write a Substitution .
    1. step 001 - Special G/L Substitution
    2. Prerequisite - Transaction code = 'FBCJ'
    3. Substitution posting key -- Exit (need help from abap) exit name
                                              G/L Exit (need help from abap) exit name
                                              Special G/L Ind Exit (need help from abap) exit name
    you can't do this without ABAP help
    Best Of Luck
    Tanmoy

  • How to clear vendor open items if vendor invoice currency and payment currency different

    Hi All.
    How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD  but local currency is INR
    while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
    I checked all configuration, configuration wise no problem
    BR.
    Chandra

    Hi Chandra,
    You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
    Invoice is in USD - 1000 & INR - 60000
    Payment is in INR - 60000
    Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
    Vendor A/c Dr 60000 (invoice)
    Vendor A/c Cr 60000 (Payment)
    Gain from exchange rate A/c Cr  100 (60000 - 60100)
    Small diff.write off A/c (or) Dummy A/c Dr 100
    After done the above posting, we have to pass below manual JV in FB01
    Gain from exchange rate A/c Dr  100
    Small diff.write off A/c (or) Dummy A/c Cr 100
    Regards,
    Mukthar

  • Clearing Vendor Open items at T.Code. F-44

    I m getting a message "Enter Doc number from number range 01 for year 2010" (msg no.F5223) while trying to clear vendor open items at T. Code (F-44)  when I give the account no and try to save it or process open items by clicking the "Process Tab". Any suggestions to resolve it will be greatly appriciated.

    Hi,
    You must have maintained the number range object 01 to your clearing do c type AB.
    In order to do clearing, you must have the number range assigned to that 01 object for fiscal year 2010 in FBN1.
    Thanks,
    Srinu

  • To clear vendor open item in foreign currency

    Would like to seek for advise.
    I am not able to clear vendor open item due to document currency is
    difference, eg.GBP with RM.refer to attachment- I would like to offset
    document number 200000384,200000200,1500000000 with 200000387.
    We try to clear the vendor open item by using t-code F-44 and F-51 but
    not able to clear as it prompt error message difference is too large
    for clearing.

    no answer reply so have to close for no solution.

  • Clear vendor open items

    Hi Gurus,
    I'm archiving FI vendor and customer documents for a company that is not more used in the system. But I need to clear all open items that I can see in FBL1N (and FBL5N).
    Does someone knows if there is a way to clear ALL vendor/customer open items? Pratically I need a FB05 that can be use for lots of vendors/customers.
    Have you got any ideas?
    Thanks,
    Marco
    Message was edited by:
            Marco Vismara

    Hi Marco,
    This is a topic which is often discussed. As I know, there is no way to 'mass' close the open items.
    You could explore the possibility of disabling the Open Item Management for the acconts for that comapany, if the accounts are not being used by other companies.
    Hope this helps,
    Naveen

  • How to clear Vendor Open item throgh the FBCJ T. Code

    Hello Dear All,
                         I am doing a Cash Payment to the Vendor, through the FBCJ but at the time of making payment i want to clear the Vendor open item. it is possible in Cash Journal.
                         And also I want to know that, Can we post the Vendor / Customer Advance payment [using special g/l indicatior] through the cash journal?
    Please Suggest.
    Regards
    Abhijeet

    Hi
    In FBCJ after payment you have clear manually vendor balance in F-44.
    If you want SPL GL in FBCJ then write a Substitution .
    1. step 001 - Special G/L Substitution
    2. Prerequisite - Transaction code = 'FBCJ'
    3. Substitution posting key -- Exit (need help from abap) exit name
                                              G/L Exit (need help from abap) exit name
                                              Special G/L Ind Exit (need help from abap) exit name
    you can't do this without ABAP help
    Best Of Luck
    Tanmoy

  • F-44 Clear Vendor Open Items

    Hi Guru's,
    We are trying to manually clear some vendor open items using t-code F-44. For some reason we are not able to find the invoice so that we can clear when we go to F-44. However, if you go to FBL1N and pull the vendor open items as of 7/1/09 you can see the invoice listed there as an open item.
    Can someone please help me on this?
    Best Regards,
    Noopers

    Assuming the vendor document is not cleared there could be two reasons why the document is not in F-44
    - Wrong company code
    - A special G/L indicator  - Document is a special GL document and in F-44 selection screen indicator is missing.
    Try additional selection -document number.

  • F-53 manual clearing vendor Open Items

    Please help me,
    When i saw vendor open items in fbl1n sys gives open items, i will try to clear that open items (F_53) sys gives message there is no open items,
    Regards,
    TML

    Hi Swati,
    The openitems which is showing in vendor account might be the spl gl transactions like advance payment, which are not cleared so far, go to F-44 and clear that spl items.
    hope it helps you,
    Regards,
    kishore

  • Clearing vendor open items

    Dear all,
    I need to clear all open vendor items posted before 2008 and post the difference to a P/L account.
    Is there a way to do that automatically?
    Thanks
    Claudia.

    Hi Claudia,
    You can use F.13 for your requirement. However this transaction will work if the Vendor accounts are configured for automatic clearing.
    IMG path for configuration for F.13 is :
    Financial accounting>Accounts Receivable and Accounts Payable>Business Transactions-> Open Item clearing->Prepare automatic clearing
    On this transaction specify the account type K (for Vendors), give the Vendor account Number range and specify the criteria to be used for clearing. i.e. the fields to be used for clearing eg. ZUONR, VBUND etc. You can specify multiple criteria and the sytem will process automatic clearing based on these criteria.
    The F.13 can automatically clear all open items based on criteria specified in IMG.
    It also give a list of documents that cannot be cleared.
    Once you have run F.13, you can pass manual Journal entries to  transfer the difference or Vendor balance to a P&L account.
    Suggested selection Criteria on F.13:
    General Selection
    Enter Company code, Fiscal year and Posting dates.
    Check the Select Vendors check box. you can enter a range of Vendor Numbers. If you leave the range blank, all Vendors configured in IMG setting above will be selected.
    Posting Period
    Enter clearing date
    Check the Test Run checkbox
    Output Controls
    Check all check boxex i.e. Documents that can be cleared, documents that cannot be cleared and Error messages.
    Hope this helps.
    Thanks,
    Uma

  • Unable to clear vendor open item.

    Hi experts,
    Have posted vendor document  under document type KZ directly, there is no open item invoice to clear the document.
    posted entry as below. now we are unable to clear the open item document through F-44. we did not find open item for the posted document which is posted in document type KZ.
    Vendor account entry
    25 vendor account 10000
    38 vendor account  8000
    50 bank account     2000
    document has been cleared only 8000 not 2000.  Please advice me how  to clear the KZ document.
    Regards,
    Anji Reddy.

    HI Anji Reddy,
    There is some Process to do Clearing function
    first of all Open item should be there in Vendor account with the Invoice.
    For that invoice there should be a payment which is full payment or else Partial Pament.
    Then you can do clearing function to clear the Open items.
    Through F-51 you can do both Payment and clearing which is Post with clearing
    if you have done payment throgh any other Tcodes you have to come F-44 and do mannual Clearing.
    Try to explain your senario more Clear so that your doubt can solve
    Regards
    Mahesh

  • Clear Vendor Open item

    Hi Team,
    I am having Vendor open item with two different profit center. Now client wants to clear the open items through T.code F-44 using Additional Selections -Profit Center option. In production server system is not fetching the open item, whereas in Quality server it is working fine.
    There is no Authorization issue. I have checked the Editing Options also.
    Is there any config issue?
    Your valuable feedback on the above issue will be highly obliged.
    Best Regards,

    Hi,
    I am not making payment by T.code F-44. Only clearing of open item. Vendor is having Dr. & Cr. balance and clearing that on profit center basis but in production it is not working.
    Please sned your valuable suggestion and oblige.
    Best Regards,

  • Unable to Clear Vendor open items in F.13

    Hi All,
    We have few vendor codes, where all are having some normal open items as well as Spl GL open items and net balance is 0.
    When we do clearing with F-44, No issues at all
    But when we try to clear them through F.13, system is grouping normal open items and Spl GL transactions separately.
    If i choose  Shortlist (Statistics) in selection screen, then only atleast i will be able to see normal line items in one group and spl gl items in another group.
    If i choose, Detailed List with Error Log, i am not able to see anything related to any kind of line items.
    So then, i red the documentation of the program SAPF124, in that it says Down payments can only be cleared if down payment clearing for the same amount has been posted.
    As we all know that, each spl GL transaction can be cleared against one normal transaction in F-54. But in our case, we never do that practice, and always want to clear spl GL transactions along with normal transactions.
    My question is that, Is it mandatory to clear them in F-54 before doing F.13?
    As i know, there is an check box option for selecting spl GL transactions in F.13....in this case why should i clear prior to F.13?
    Please advise...
    Regards,
    Srinu

    Hi Gaurav,
    Thanks for your inputs.
    I agree with you, but my intention is to know, whether any possibility (change of internal selection criterion for recon account)
    to clear them automatically in F.13 without doing F-54 only.
    Anyhow i have found two other alternative solutions for the same.
    1) Batch input recording for F-44 in LSMW.
    2) Using worklist instead of vendor code in F-44 to clear all items at one go.
    As our business won't follow clearing with F-54, so this requirement may come often. 
    But only my concern is, they need to identify these cases separately and spend more time to add each vendor code to that worklist, since they are not able to add a range of vendor codes directly. As it allows only single values.
    So, is there any other way, which we can suggest them to add 10000+ vendor codes to the same worklist, since we can add 12 codes at one go and repeating the same will take time
    Regards,
    Srinu

  • F110 doesn't clear vendor open items. Interad it creates one more entry.

    Hi!
    This is the problem I have. I run F110, proposal is great, payment is great, check is printer. Check in FCHR is created.
    I go back to FBL1N - open item is still there! More that that - another open item with document type - ZP is there, but it showed up as additional open item - not clearing item. When I click on it  - accounting document shows me : Clearing date 12/03/2008 - and same document number.
    Why doesn't it clear it and it still says OVERDUE???
    And of course, I can not post check cashed because of that in FCHR.
    Please let me know.
    Thanks!!!!!

    Hi,
    In FBZP transaction code while configuring The Automatic Outgoing payment, In Payment methods in country Tab under posting control What are document type you have defined for
    Document type for Payment and Clearing document type ? generally it should be same , normally KZ
    The payment for which F110 was executed , Is it a down payment to vendors?
    Pleease Check it.
    With Regards,
    Sudipto

Maybe you are looking for