Possible to continuous advance video frame by frame?

In the prior program I was using I could do a frame by frame advance by holding down the arrow key (either forward or reverse). LR4 seems to want me to keep "pressing" the frame advance key for each frame (I am aware shift adavances by 10 but you still have to keep pressing repeatedly).
Thanks 

Not that I know of.

Similar Messages

  • Is it possible to convert a video to still frame?

    I'm working on a stop animation project and I want try to use video instead of still frames to capture the animation because I'm teaching kids. Can I shoot the video and then convert it to still frame shots in Final Cut? I know there is a make a freeze frame but is there another option?

    Take a look at this:
    http://www.boinx.com/istopmotion/overview/
    Hope this helps.

  • Is it possible to place a video inside a frame or behind an object to crop it?

    I'm trying to place a video behind a psd of a TV screen that is a different aspect ratio than the placed video. When I try to place it inside a frame or behind the psd with a clear window, it will not export to interactive pdf as such. It shows the vid full size. Is there any way around this?

    Lauragalora119,
    There's a way around this. But it takes a few steps.
    Place your video as usual.
    Now, create a frame that would be the outside of the TV screen. Now create another curved corner rectangle that would be the screen of the TV. Select them both. I would make these outside the area of the video as you don't want the video to be the in the next step.
    With those two frames selected, choose Objects> Pths> Compound Path Make.
    You now have a hole in the frames.
    Fill with a color or Paper. Optional: Import an image of the woodgrain of a TV set.
    Now, with this compound path selected, choose Buttons and Forms and make this a button that does nothing.
    Now, if you were to export this as a PDF, the video will play "inside" the screen frame but it's really playing behind a button. The button is on top of the video because it was on top of the video in the ID file.
    However, you can't click on the video to play it because it's behind the button. PDFs don't recognize the holes in compound paths.
    SO, back in InDesign, I created a little round button that I would consider the dial to turn on the TV. (I'm old enough to remember televisions that had rounded objects to turn them on and off. You may want a more digital looking object.)
    This button will have an action applied that plays the video.
    TaDa!!! You've done it!
    And your day is not ruined.

  • Advance frame-by-frame on a streaming video

    Hi,
    i've recently installed Wowza media server 2 locally, currently only for testing purposes.
    everything works fine, except of accurate seeking functionality - or in other words advancing frame-by-frame .
    when i use VLC to play my video file i have no problems advancing frame-by-frame.  however, when i use the 'seek()' function to move the playhead a fraction of a second, its seems to move only to the next key frame (meaning that only once every few mouse clicks the playhead advances dramatically).
    i thought that when using streaming video (unlike progressive download) this issue is resolved.  am i wrong?  did i miss something?
    thanks in advance,
    eRez

    II think you should post your query on Wowza forums - because this forum is for Flash Media Server and probably not best place where you can find Wowza server experts.

  • Why can't I advance a video frame-by-frame with the arrow keys?

    I am able to play a video, and to scrub through by clicking and dragging the play head, but when the video is paused, my arrow keys won't advance frame-by-frame.  Is there a place that I have to enable the arrow key function?  I've looked through the Preferences but didn't see anything.  Anybody know how to get this to work?  Thanks!!

    This forum serves Photoshop.com, the online service.
    For help with the desktop version of Photoshop CS, please repost your question here: http://forums.adobe.com/community/photoshop

  • Is Frame by Frame Seek possible in Flex 4?

    Hi,
    I am working on a Flex player and I want to move frame by frame but the seek() function moves only in seconds.Is it possible using any other function? Plz reply. I am kind of stuck. The functionality I want is available in VLC media player. You can see it by playing a video and continue pressing the "e" key from the keyboard which moves the video frame by frame.
    Thank in advance.

    David,
    It seems iM4 can have only one project open at a time.
    Your observation is correct, iMovie 4 will not let you copy and paste or drag and drop video clips, audio clips, and photos from one project into another.
    With iMovie 4 you will be limited to opening one project at a time. However there are several techniques that will allow you to share clip(s) from one project to another (eg. clips that have been edited on the timeline or clips from one project's media folder to another project media folder).
    Exactly what are you trying to do, or were you just asking to see if this feature was available in iMovie 4?

  • Accessing both video fields of frame in workspace?

    I am new to video and have just learned there are two video fields per frame of video.
    Is it possible to access both video fields of the frame within the workspace of PP CS6?
    I am working with 29.97 fps dv.
    Thanks in advance.
    Thomas
    iMac late 2012  Mac OS X 10.8.3

    Hi Thomas,
    If you are asking if you can somehow "edit" at the field level, then no. But if you want to see the full frame (combined fields), in the Program Monitor, right-click in it (or Mac equivalent) or there is a wrench there to click on as well, and in the drop down list, look at Fields options and set to BOTH rather than upper or lower.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Imovie video at 7 frames per second?

    I'm working on a stop motion piece that's meant to run at 7 fps, but the slowest I can seem to make it run in imovie is 10 fps. Is it possible to get this video to work at my desired frame rate, or is 10 fps the slowest the program will allow?

    You're talking Swahili while the rest of the AE users are talking Chinese.  The result: lousy communication.  It comes from not knowing AE very well at all.  You don't yet know the arcane AE Lingo, so you can't even explain things in ways everyone understands.  Confusion ensues.
    Do EVERYONE -- including yourself -- a big favor.  Go here:
    Getting started with After Effects (CS4, CS5, CS5.5,  CS6, & CC)

  • Making a video with single frames

    Hi,
    I'd like to make a video with single frames.
    One of my computergames is able to take 25 frames per second (or 30, 40 etc.). The game saves the frames in a folder. For one minute there are over 1000 frames.
    Now I need to know, how I can tell After Effects that every 25 frames are one seconds.
    I just want to make a movie of this game. This will be the easiest way if After Effects can handle with these single frames.
    Is it possible? I will be very happy if some can explain me the way to realise my idea.
    Sincerely,
    RazooN

    Footage Interpretation and preferences for image import.
    Mylenium

  • Can't advance frame-by-frame in FCP4

    For some reason, the video in the canvas will not advance frame by frame when i hit the arrow buttons. The audio moves, but not the picture. If i play back normally or slo-mo, the video advances normally, just not when i use the arrows. However, the video in the viewer advances correctly.
    I am running the video off a firewire hard drive, but this hasn't been a problem in the past. I'd love some help!

    Get yourself up to fcp 4.5. (free dl)
    v 4.0 was a bit unworkable.
    From memory - there were other funny things as well ...
    Have you recently also upgraded qt ?
    Do not go past qt 6.5.2 with Panther.

  • Video frame by frame?

    Since we're now being shoe-horned into using iTunes to play any and all purchased content (as opposed to the old, functional way of being able to use QuickTime Player), can anyone tell me how to advance video frame by frame (one frame at a time) in iTunes? The arrow keys don't do it, none of the "forward/reverse" buttons work, and using the mouse wheel freezes the video and jumps ahead or back several *minutes* at a time, not frame by frame.
    Or is this another wonderful "feature" of iTunes 11 that I should "thank" Apple for showering down on us humble users?

    Oops -- forgot to mention: this is on Snow Leopard (10.6.8).

  • Acheiving frame by frame in videos.

    Hi all, I'm trying to achieve true frame by frame but have
    run into some problems.
    To do this I have been changing the VideoDisplay and
    VideoPlayer classes. This is an AIR app set to 99 fps, and I'm
    getting an actual framerate of around 88. I have encoded videos
    into flv's using Flash CS3 Video Encoder being sure to set
    keyframes to every frame and have varied the framerate from 10 to
    30 and the video data rate too.
    When going frame by frame I have the video in a paused state.
    On click of a button the video will seek to the next keyframe
    (which should be the next actual frame). As an example, using this
    method I can only actually get an average of 19 frames in a second
    for a video encoded at 24 fps when the data rate is 2K kbs (data
    rates higher or lower will only allow me to get as low as 10 frames
    in a second). The video metadata confirms that the video is 24fps.
    I also tried a play/pause method where I perform a check
    every time the enterFrame event is dispatched by the videoPlayer (I
    get more frequent updates from this than setting the
    playheadUpdateInterval value really low) and pause if the playhead
    has advanced. My event handler gets called about 88 times a second,
    consistent with the framerate. With a 24fps video, we would expect
    the playheadTime of the video (which is == ns.time of the NetStream
    object) increase by intervals of 1000/24 = 41.667 milliseconds. But
    when I play the video and store all the playheadTime values in an
    array, I see it sometimes goes up by 14 ms, or 52ms to name a
    couple (and still get about 19 frames in a second).
    Interestingly, the playheadTimes are not always consistent.
    On one run I saw the playheadTime go from 9.9s, to 9.978, 10.109,
    to 10.135. Another time the playheadTime went from 9.9s to 10.057,
    10.109, 10.135. So we gained a frame at 10.057 but the one at 9.978
    was not "found". After a few more runs I saw that the playhead also
    reached 9.952s, and 10.031s. So consider: 9.900, 9.952, 9.978,
    10.031, 10.057, 10.109, 10.135. This range has playhead increments
    of 52ms, 26ms, 53ms, 26ms, 52ms, 26ms.
    So the playhead increments are not consistent. That's fine.
    But the playheadTime times themselves do not always exist, or the
    Video.as class is not reading the .flv file consistently, or the
    NetStream class is not updating the time property correctly,
    or.....? Unfortunately Video.as is an intrinsic Flash class and I
    don't have access to it, nor do I have access to NetStream.
    Does anyone have any suggestions? Or see something I missed?
    Any help on this would be greatly appreciated as I've kind of
    burned out on getting this to work. Thanks.

    Yes I would like to be able to do this again. Can itunes use Quicktime 7 as its video player?

  • Frame by Frame editing of Video in PSE

    Hi and good morning and Happy New Year to all @ Adobe Support,
    I have had more versions of Adobe PSE than I really like to think about, not to mention other various Adobe products.
    To go directly to my question, I had thought that I had used PSE to edit frame by frame videos ?
    Have I gone bonkers ? I just purchased PSE and PE to make sure I could edit a few short videos that I wanted to draw in simple things like lines, drops, arrows, etc. Now it seems I have two products that both can't accomplish this and apparently I cannot get a straight answer to what I should have on your site or in the forum or anywhere else, for that fact. I'm hoping you are not going to tell me I need a 500 dollar program to do this ! I only have a dozen videos I would like to paint or draw in and the last time I needed this was 1992 or there abouts. I am a Mac user and currently have 10.9.1 installed. Just for your information the installation went of without a hitch for both products on Mavericks and appear to be working fine, aside from the fact I can't frame edit videos in either one.
    Thank you for your time and consideration on this matter,
    Wade Arnold
    Apple and Adobe Enthusiast

    The most recent version of PSE removed the ability to import a frame from a video file. I suspect this is what you were thinking of.
    However I assume by 'PE' you mean Premiere Elements (PRE), the video editor. You can still export a clip from PRE as a sequence of still images that you can then edit in PSE and reimport back to PRE. This is in Publish+Share> Computer> Image> Advanced, check 'Export as sequence'.
    However from your description you might be better off using the tools in Titler within PRE to draw your lines and arrows - this is way simpler than doing so frame by frame in PSE.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Variable Speed and/or Frame-by-Frame Video playback with Waveform synchronization

    I'm using Diadem 2011 to view data recorded in a LabVIEW Module that we have written.  The function of our LabVIEW module is to simultaneously capture video from two infrared cameras and 8 channels of waveform data from a DAQ and record this data to disk.  Data is recorded as two separate AVI files (compressed) and a TDMS file (using TDMS logging).  Using Diadem, I use the video synchronization function to view the TDMS data and video files.  I can scroll a cursor in the waveform data panel and view the video corresponding to the time selected.
    I am looking for two features from Diadem that I am not sure are present: 1) A way to vary the playback speed from real-time.  2) A way to advance the video in a frame-by-frame manner.  If anyone has any suggestions on how I might implement this in Diadem 2011 or can verify that these features are present, I would very much like to know.
    Thanks in advance.
    Solved!
    Go to Solution.

    Hello Resaebiunne,
    All the functions you are looking for are available in the VIEW toolbar.
    For the frame reverse/forward functions, please make sure that the section with the video inside is highlighted and then use these two buttons. The "Cursor Parameters" icon let's you change the playback speed.
    Hope that helps,
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Can I go Frame-by-Frame with video AND audio?

    I'm new to soundtrack pro. In Final Cut, I liked being able to use the arrow keys to see the video frame by frame and also hearing the audio frame by frame. I can not seem to figure out how to do this in soundtrack. Is it possible?

    You may need a 3rd party application to view the DVD in a wWindows format such as
    http://flip4mac-3.en.softonic.com/mac
    https://www.macupdate.com/app/iphone/5758/vlc-media-player

Maybe you are looking for