Possible to convert existing MP3 using CMSS-3D and Crystaliz

I'm quite impressed with the way CMSS-3D and 24-bit Crystalizer can upmix lower quality recordings but I'd like the effect to be permanent on some of my existing files. What I would like to do is to resample my existing audio files much in the way super-rip handles the conversion of CD's to WMA. I have not yet found this option or even know if this is possible. I'd appreciate some pointers.
Thanks in advanced.

# SuperRip? allows you to rip your CDs into Xtreme Fidelity quality.
The X-Fi 24-bit Crystalizer and X-Fi CMSS-3D features allow you to "SuperRip" CDs into Xtreme Fidelity quality so you can now enjoy permanently enhanced music instead of low-quality MP3 files!
If previous suggestion didn't help then the only possible is to try, if recording your audio files while playing with these effects applied, using Creative Media Source with recording source select to "What U Hear" can do the job.
.jtpMessage Edited by jutapa on 09-8-2005 07:05 PM

Similar Messages

HT2619 is it possible to convert a mp3 file in a text?

is it possible to convert a mp3 file in a text in final cut?

Huh?
You can use iTunes or QuickTime Pro to convert an MP3 file into an AIF file for use in FCE. But convert to a text file? I don't think so. But if that is what you really want to do, look here: https://www.google.com/search?client=opera&q=mp3+to+text&sourceid=opera&ie=utf-8 &oe=utf-8&channel=suggest&gws_rd=ssl
-DH

IS IT POSSIBLE TO CONVERT DATA SERVER EXAMPLE INTO DLL AND CALLING IT FROM VC++

Hi;
I have a real time implementation that runs in my PXI machine. Then I have a front panel running on a different computer (host) that reads the outputs of the real-time machine and plots them. The output of the real-time machine is a 2d array. What I am trying to do is take this data and send it to my C++ application. To do that I am considering sending the data to a specific port on my host machine using the data server example (2d version of it). To this end, I am considering converting this server into a Labview dll and read its output in my C++ code.
I am wondering if this can be done?
If yes Could you please provide me a little code as to how to read the outputs of this Labview dll in c++?
Is there any tutorial as to how to create a Labview dll for Labview 2009?
Thank you so much!
Serdar

Hello,
You may want to take a look at this tutorial:
http://zone.ni.com/devzone/cda/tut/p/id/3517
Let me know if it helps!
-Zach
Certified LabVIEW Developer

Possible to convert Raw to JPEG without exporting and importing?

I have about 4,500 raw photos that I need to print on contact sheets (or print contact sheets to a PDF). I took the photos all in Raw format. Aperture, or my computer, is not powerful enough to process all of these photos onto contact sheets from the Print Images menu item; it takes several hours. I suspect I need to convert the files to a low-quality JPEG and print the contact sheets from those, which should be fine because the thumbnails are so small.
Here's the question: I know that I can create JPEGs from these raw files by exporting as JPEG and then reimporting them into Aperture, but this seems overly complicated. Is there a way I can select a number of photos within Aperture, and then select to convert them to JPEG of a particular quality, without leaving the application? Or are the multiple steps - exporting and importing - necessary?
Next time I'm shooting Raw+JPEG to avoid this, by the way...

So my workaround actually worked. I exported the photos as low-quality JPEGs, reimported them into a new project, and processed a Contact Sheet off of those. To process a Contact Sheet with the raw files would have taken Aperture about 12 hours or so. To process a Contact Sheet using the low-quality JPEGs took about 10 minutes. I'm glad this worked, though I wish there were a way in Aperture to create JPEGs from the raw files without leaving the application.

Is it possible to scan on iPad using iPrint app and then e-mail or upload resulting files?

I have an iPad2 with the latest iOS 4.3.2 update. My printer/scanner is the Deskjet 3050 / J610.
Scanning works great and the quality is very good. After saving the scan as a "document" (it actually got saved as a PDF file which I was very happy about) I have to do something with that document - I can either upload it to Dropbox, an FTP server, or anyplace else, or as plan B I could e-mail the document. But I can't figure out how to do anything with the resulting PDF after saving it to the Documents folder in iPrint.
Scans saved as images can be moved into the Photo Album and e-mailed from there - it's an unnecessary, clumsy step, but at least it's possible to get the image off the iPad. How do I get the PDF?
Thanks in advance for any suggestions.

you can definitely look into the Google Cloud Print as an alternative.
Here is the link where you can find out more information about Google Cloud Print
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Do I need to purchase a converter when I use my MBP and Mac mini in AUS?

Hi all,
I have no idea if I need to purchase a separate voltage converter for the MBP and the newly purchased Mac mini. The geniuses from Apple store claims that it is built-in, so all I have to do is do get an adapter kit to swap with the removable North American plug that I have. My MBP was purchased just a month ago, but it is the first Penryn. Specs are as followed: 2.53GHz C2D, 250HD, nVidia 8600 GT 512MB with the LED screen. Any hints would be appreciated.
Thank you.
Z~

Hi thanks a lot for your quick response. Yeah I did some more digging just now and found the same answers online. But how about the Mac mini? I actually looked at the power brick and it indicated: AC Input: 100V - 240V 50-60Hz. So that mean I need only an adapter to get that working in AUS? Thank you very much for your help once again.
Zarah

Possible to convert DRM protected WMA files to mp3?

I've been attempting to find a relatively simple way of converting DRM-protected WMA files to mp3 using my Mac and can't seem to find anything. Surely somebody must have figured this out by now. I can convert non-DRM WMA files to mp3 using EasyWMA, but this does not work for WMA files with DRM protection.
I want to purchase songs from the 7digital store that are in the WMA format and have DRM protection, convert them to MP3 on my iMac, and then import them into iTunes. Seems like it shouldn't be that hard.
Any suggestions?

iTunes Windows will convert non-DRM tunes into .mp3. If you have iTS purchases that have DRM you can burn them to an audio format CD as AIFF file format.
Check the terms of use and see what your options are for converting them to another format. With iTunes the path is to burn an audio CD. See if that is possible with the wma DRM.
Likely in your case you are trying to crack DRM outside the original terms of use when you purchased the tunes.
MJ

Converting a tape to MP3 using Garageband and my MacBook...

I'm having a problem converting some of my old books on tape to MP3 using my MacBook and my stereo. I have a cord with mini-plig attachments on both ends - one end is connected to the headphone out jack on my stereo and the other is connected to the mini-attachment next to the headphone jack on the MacBook. For whatever reason whenever I try to record all I get is distorted static.
Any ideas on how to proceed with this?

You may need to adjust the volume levels both on the stereo output and the MacBook Sound Input Level in System Preferences. You need to adjust it so that the signal isn't amplified too much resulting in clipping or distortion.
You should be able to preview the sound coming into the MacBook to adjust those levels until it has an acceptable sound quality.

Converting From Mp3 to Wav and also dividing a song.

Is it possible to convert an mp3 to .wav and then split the entire song into 10-second wavs. If there is a way, please share. Thank you. I'm using Quicktime Pro

Nathan, welcome to these discussions.
Open the .mp3 file with QT Pro.
Set the "in and out" (selection markers) to the ten seconds you wish to convert and use "Copy" from the Edit menu.
Open a new QT Player window (Control-N) and then Control-V (paste).
Choose "Export" (File menu) and then choose Sound to Wave.
Repeat for all the conversion you want to make.

Can Indesign CS5 convert files for use on Kindle?

Hello,
Have any of you converted books for use on Kindle, and if so, how did you do it, and did it go smoothly? Please explain in "dummies" terms, as I find this topic to be very confusing.
If I convert files to ePub format in Ind. CS5, is this all I need to do to convert it to a format that can be used on a Kindle reader? Would this work for graphics as well as text?
Internet searches about this gave info for an older version, CS4, and seemed to require using supplemental software to successfully convert to Kindle format.
Thanks for any advice.
L

Yes, going to EPUB and then Kindle seems to be the best route.
A few suggestions.
1.       Upgrade to CS6. EPUB capabilities have been dramatically improved.
2.       Buy some good books EPUB. I suggest these two Liz Castro’s books for a start: http://amzn.to/LI9Q5b and http://amzn.to/LIa38o
3.       Visit Liz’s blog: http://www.pigsgourdsandwikis.com/
4.       Check out Ann Marie Concepcion’s excellent Lynda.com titles. This link will get you a one week trial: http://bit.ly/fcGpiI
Finally, you need to get at least a beginner’s grasp of HTML and CSS. Without that, quite frankly, you’re screwed.
Bob

I use photoshop elements version 11 and just bought a nikon d750. Photoshop elements can't open/read the raw/NEF-file. Does a photoshop elements raw converter exist for Nikon d750 ??? And where can I get it ?

I use photoshop elements version 11. I just bought a nikon d750. Photoshop elements can't read/open the raw/NEF-file.
Does a raw converter exist for this camera and where can I find it ?
Thanks for any help.
erwing97792269

You need Adobe camera raw version 8.7. Unfortunately your software pre-dates the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7
Mac download (.dmg file) click here DNG Converter 8.7
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Converting to MP3 causes iTunes to Not Respond while using 50% CPU usage and makes my computer stutter

Anytime I attempt to "Createa an MP3 Version" of a track, it will take a REALLY long time to work.
Right now I am attempting to convert an audio book I have which has 88 tracks. Once I start to convert anything more than 1 track at a time, iTunes immediatly becomes "Not Responding" and takes up about 50% of my CPU the entire time. It seems like it's doing something in the background but it won't even update the screen anymore, creating weird effects on my screen (Ghost menu bars show up at the top of my screen, etc.). In addition, once iTunes becomes non-responsive, my entire computer starts to "stutter" meaning that every other second everything momentarily hiccips and stop for a split-second. This means that while iTunes is converting any multiple MP3 files, if I drag the mouse across the screen, it stops every other second. Any videos that I try to play pause every other second briefly. Basically, my computer becomes almost unusable. Plus, while iTunes is working in the background, different programs randomly jump to the front of the screen. I will try to be using my web browser while iTunes is working in the background. Then, suddenly, iTunes pops back up to the foreground in front of my browser (put still won't be responsive to clicks). My notes program will also flash windows in front of my web browser while surfing, again, only when iTunes is running in the background.
I really don't understand:
1. Why it takes so much time to convert any file to an MP3 file. Even converting a single track takes a few minutes. I'll let my Macbook Pro (with Windows) sit for HOURS upon hours trying to convert the 88 track audio book and it always freezes up and never comes back.
2. Why iTunes becomes non-responsive so quickly and won't allow the screen to update once it starts "thinking." It caps out around 50% of my CPU power so it's not like it doesn't have the headroom to refresh the screen while it works.
3. Why does iTunes' working in the background affect every other program I am running? I don't mind if it uses up CPU cycles in the background, but if it makes my computer unusable while doing so, it's really not worth it.
I should state that I love Apple products (even though I use Windows on my MBP for school purposes). However, I absolutely DREAD having to do anything with iTunes anymore because it has become such a hog on my computer. Someone please tell me that there is something wrong with my iTunes and/or a setting I should change. I have already re-installed iTunes from scratch before and that didn't help.

Not a solution, but if the Podcast feed is dormant, why not unsubscribe?
As to the file structure for media on the device it is deliberately obscured as a countermeasure to casual piracy. See Recover your iTunes library from your iPod or iOS device. Content put on the iPod by a non-iPod aware product is going to treat it like any external drive. The iPod firmware won't read that media.
tt2

How do I convert an MP3 file to use it as a ringtone on my iPhone 3G?

How do I convert an MP3 file to use it as a ringtone on my iPhone 3G?

Andrew J wrote:
Everybody's wrong wrong wrong. You don't need garageband. Select the song, go to info. You need to select a start and stop time for the song that can't be any longer than 40 seconds in length. Then in advanced mode you convert the song to acc. once done locate the file on the computer. it should end in .m4a . Change the a to an r so it reads .m4r Drag the file to the desktop, double click and it ends up in ringtones folder.
That's it! Works every time. Or for those who want easier:
http://www.ambrosiasw.com/utilities/iToner/
My drug of choice.

Is it possible to convert a DWF to PDF using a command line or batch process. How can I see this in action?

I need to convert DWF files to PDF. Is this possible? Adobe able to batch them and can they be converted via a batch or scheduled process.
We have a team placing DWF files on a network drive. Then we need to scoop them up and convert them. Using SSIS or a C# program we can move the converted files to an archive folder. Is this possible to do using Adobe?

Hi pnorm,
Please check the 'Convert AutoCAD files in batches' section in the Doc : http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f35.w .html
Regards,
Rave

How do i convert my mp3 songs to itunes for ipod touch use

how do i convert my mp3 songs to itunes for ipod touch use?

Drag them into the open iTunes application window.
(82797)

Possible to convert existing MP3 using CMSS-3D and Crystaliz

Similar Messages

Maybe you are looking for