Possible to detect if a connection was fetched from the connection pool?
Is there any way to differentiate between newly opened connections and connections that came from the connection pool? It would have to work without requiring a round trip to the server because I'd only use it to optimize away a procedure call that I now have to do for every connection that is opened.
If the answer is different for the classic provider and the fully managed one, please provide both.
@Op. What you are trying to do can't be done.
Similar Messages
-
Is it possible to restore file if it was deleted from the reciclebin
By mistake deleted file with win XP operational system from parallels virtual machine and emptied trash bin, can it be found and restored?
Hi p,
Do you have a backup? Time Machine?
If not, there is not way to resurrect files without data recovery software (or service) such as the following:
http://www.prosofteng.com/products/data_rescue.php
http://www.binarybiz.com/vlab/mac.php
http://www.drivesaversdatarecovery.com/
http://www.macupdate.com/app/mac/16097/filesalvage -
Itunes could not connect to the ipad because an invalid response was received from the device
Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now. -
Is possible to work with both Connection Pool?
Hello,
I would like to know if is it possible to work with both Connection Pools: Active Directory and DWH User? If it's yes, how can I specify to work with both simultaneously?
Thank you and regards,
Mónica.Hello Gayathri,
The version is OBISE1 10.1.3.2.1
The scenario is the following:
I have two connection pools
- One is mapping the DWH and it is using the System's variables :USER and :PASSWORD. Then I have an Initialization Block that get these values and I have created the logins as users in the database.
- The other is mapping the DWH tables.
I want to create directly users into the repository. The problem is the users of the repository cann't do the login because the first connection pool is trying to validate then against the database.
Would be possible to validate the users against the connection pool and the repository simultaneously?
Thank you and regards,
Mónica. -
How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device
take a look at https://discussions.apple.com/message/24243668#24243668. i had this problem and that solved it for me.
-
I have an Ipod Touch 4G, Although I have tried two connection leads to the computer, it comes up with the message ' Itunes could not connect to "Dads Ipod" because an invalid response was received from the device'. I can access the contents of the device via the connection leads using 'My Computer' but not through Itunes as the message always appears!! Using WinVista Homebasic. Is this a known fault with the Ipod4 and VISTA? It works okay on a laptop, however, I would like an expert to take me through the steps to sort out my home desktop computer? Please help? Thanks in advance
ITry this previous discussion:
https://discussions.apple.com/message/11240674#11240674 -
Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115 -
i lost my iphone a few days ago and i received an email saying that my icloud account was disable from the phone is that possible?
Hi Jorge858,
I'm sorry that you lost your iPhone. The article below will explain what you should do in this situation.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
https://support.apple.com/en-lb/HT201472
I would suggest you contact the Apple ID Account Security team regarding the email you received and to change the password of your Apple ID account.
Contact Apple for help with Apple ID account security - Apple Support
http://support.apple.com/en-us/HT204169
Regards,
Judy -
my mother got an iPad air after she thought her old iPad was locked up with voice over anyway it says to hook to itunes i told it to fetch from the iCloud and it wont hook up to iTunes can someone help?
Punctuation would make your post a little easier to read and understand.
What do you mean it won't hook up to iTunes? you mean iTunes does not recognize the device? If that's what you mean, one of these might be helpful.
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
IOS software was froze when the electricity went off and it was disconnected from the wifi
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. -
Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."
Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through. -
I am a US resident but spend several months each year at my house in England. Is it possible for me to download UK iPad apps from the iTunes Store? Right now they seem to be restricted. Can I set up an alternate iTunes account using a UK credit card?
When you go to Starbucks, you'll need to first go to Settings on your iPad and choose Network. You'll see ATTWIFI as one of the available networks. When you click on that to select it, you should be immediately sent to AT&T's sign in page. You just need to check the box that says you agree to their terms and conditions and then hit the Connect button and you'll be online. One warning, however. If your Starbucks is anything like those in Manhattan, be prepared for really slow wifi. It can be a real pain waiting for pages to load sometimes.
-
How the data is fetched from the cube for reporting - with and without BIA
hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider *****Table type ***** Viewed at ***** Records, Selected *****Records, Transported
Cube A ***** blank ***** 0.624305 ***** 8,087,502 ***** 2,011
Cube B ***** E ***** 42.002653 ***** 1,669,126 ***** 6
Cube B ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider *****Table Type *****Viewed at *****Records, Selected *****Records, Transported
Cube B *****E *****46.620825 ****1,669,126**** 6
Cube B *****F ****106.148337**** 2,426,030***** 6
Cube A *****E *****61.939073 *****3,794,113 *****3,499
Cube A *****F ****90.721171**** 4,293,420 *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens -
How the data is fetched from the cube for reporting
hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider *****Table type ***** Viewed at ***** Records, Selected *****Records, Transported
Cube A ***** blank ***** 0.624305 ***** 8,087,502 ***** 2,011
Cube B ***** E ***** 42.002653 ***** 1,669,126 ***** 6
Cube B ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider *****Table Type *****Viewed at *****Records, Selected *****Records, Transported
Cube B *****E *****46.620825 ****1,669,126**** 6
Cube B *****F ****106.148337**** 2,426,030***** 6
Cube A *****E *****61.939073 *****3,794,113 *****3,499
Cube A *****F ****90.721171**** 4,293,420 *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan -
Is it possible to have 5.1 S/PDIF input from the pins of Audigy 2 ZS SB0350?
LIs it possible to have 5. S/PDIF input from the pins of Audigy 2 ZS SB0350? Hello,
I took this sound card (Audigy 2 ZS SB0350) yesterday from a friend, just to test whether it can do what I intend to use it for. It is only the card itself without the front panel (the I/O Dri've Bay) and I want to connect a satellite receiver's S/PDIF output to the sound card input in order to experience a 5. sound, which my satellite receiver supports. Since it turned out that this sound card has no digital inputs but on the front panel (the I/O Dri've Bay), I started wondering whether I can connect the coaxial digital out of the satellite receiver directly to some of the pins of the Audigy 2 ZS, and in case I can do that, will I have the desired 5. sound on the analogue outputs of the sound card or just stereo?
If this is impossible, can you confirm that if I buy Audigy 2 Platinum (with I/O Dri've front panel) I can have the desired effect (no matter if the output of the satellite receiver is coaxial or optical)?
Thank you for your answer
Best regards,
ZdravkoInstall disks for specific systems do not boot a different system. Sometimes if the two computers are from the same year and are the same type and the same build number, maybe.
Maybe you are looking for
-
Regarding creation of a standard table
Hi, In my landscape, somebody deleted a standard table in one of my systems. when i am trying to access this table it is throwing an error message stating that table does not exist. check name. Now i want to know how to create this standard table and
-
Time Stamp against Master Data
Hi, Is there any BADI to identify when (date & time) the master data field updated individually. Example: "ABC" company is having 2 user interfaces to update the Master Data a) CRM Call Centre and b) Disconnected Mobile Client (Mobile Client will dow
-
Can the portal language be specified in the URL
can the portal read the language information from the launching URL? something like: The specified item was not found. The specified item was not found.
-
How can I run the following query with multiple parameters. Select empno,ename from emp where (empno,ename) in (7369,'SMITH',7900,'JAMES') What am I missing ? Best Regards, Luqman
-
hi there, i have a program with ALV tree. is it possible to 'grid' the columns ? i mean to put vertical lines between each field like it is in standard-alv-grid ? reg, Martin