Possible to disable intercom auto-answer on CUCM 10?

We're setting up CUCM for a new client and I've been working on intercoms.  I've run into some issues related to both presense and barging.
Because intercom speed dials cannot be set up as BLF speed dials, we're having to use additional button real estate for a seperate BLF speed dial button.  This is fine, its just going to take some user culture training to get them to look at the BLF before intercoming.
However, this would be much less of an issue if intercom can be set up to NOT barge in when a call is in progress.  I understand that the intercoming party will not be able to hear the non CUCM side of the call that is currently in progress but i guarantee that users are going to HATE that someone can intercom over the top of a call currently in progress.  Is there anyway to turn off auto-answer on the intercom feature?  This is really simple to do in CME but i can't figure out how to do it in CUCM

That may very well be the best approach. I think CUCM 7.x had the option to disable auto-answer but that functionality was removed in later versions. I know it isn't in 9x and 10x and 99% positive it was removed in 8x.
I have been asked this question a couple of times and BLF/SD w/ standard DNs seems to be the closest config option based on the functionality you are looking for.
HTH
-Bill (@ucguerrilla)
http://ucguerrilla.com

Similar Messages

  • Is it possible to disable the auto lock with clock?

    Is it possible to disable the auto lock with clock?

    Is it possible to disable the auto lock with clock?

  • 79xx intercom (auto answer)

    Hello,
    I am a bit disappointed, that such expensive phones are not capable of correct auto-answer.
    We are using 79xx phones in SIP mode and I know that it is possible to set auto-answer on these phones, but this option will auto answer all calls on particular line.
    Our intended behaviour is to auto answer only calls that has auto-answer header. Even much cheaper small business SPA phones are capable of this!
    It would be great if Cisco consider this option in new SIP firmwares, because Cisco products are great, and these small features are easy to fix...
    And as far as I know there are much more other users willing this functionality.
    Thank you!

    Cisco has never advertised these phones to be fully functional with anything other than their own PBX platforms: UC Manager (runs on x86 servers) and UC Manager Express (runs on Cisco routers). If you can get it to work with the another PBX, don't expect any functionality beyond that outlined in the original RFC3261 spec. You should be looking at Snom or other generic SIP phones that are certified with whatever PBX you are using.
    Cisco AM would be your Cisco Account Manager, aka your Cisco sales rep. In my opinion, you have zero hope of getting Cisco to make any Product Enhancement Requests (PER) for the endpoints on third-party PBX. You would have to be a truly massive account for them to even entertain it, again IMO.

  • Is it possible to disable the auto-correct on an ipod touch?

    Was planning to order an ipod touch. Primarily to use for email whilst travelling. But I can't stand auto correct or predictive text. I always forget to check if the auto feature has changed what I wrote to something totally different! Can anyone tell me if there's a way to disable this feature on an ipod touch?

    Yes, in fact there is a way. On the iPod, tap Settings. Then, go to General. Scroll down and tap Keyboard. Tap Auto-correction and it should turn off, unless it is already off - then this will just turn it back on. You can put auto-correction on or off anytime you want. Hope this helped (:

  • Is it possible to disable the "auto preview" for pdf's on my ipad email?

    I have iannotate pdf and sign my pad but when I recieve a 1pg pdf it is open on the email and I can't modify or add to the pdf from one of my other programs.

    Matt - just tap and hold on the PDF (even though it rendered in the mail) and you will get the Open In option.

  • Is it possible to disable the autodimm function, so that the clock can be displayed all the time?

    Is it possible to disable the auto dim function, so that the clock can be displayed all the time?

    At this time it is not possible. Sorry. 
    Being able to do so would dramatically decrease your iPod's battery life between charges.
    B-rock

  • Is it possible to disable auto fill in address field?

    I need to disable the auto fill function in the address field. Is this possible?

    Hi Joe
    There's no way to disable the URL. Trashing the History (User Account>Library>Safari folder) and Metadata files (User Account>Library>Cache>Metadata and Safari folders) minimizes the prompts. Purging all Bookmarks helps too. However, the actual function of the prompts is built into the application's software, so it simply starts to rebuild the prompts again.
    If you don't want to see prompts, simply press the space-bar once before entering a URL. That's the only work-around. If you don't want Safari to record your browsing activity, select "Private Browsing" in the Safari Menu each time you open Safari.
    3rd party features- Glims is a good one!

  • Prevent Agents from disabling Headset Button hen using Auto Answer With Headset

    Help!!!
    When you enable "Auto Answer with Headset" an agent can still press the Headset button and break that function.  Is there a way to keep the agent from being able to disable the Headset button on the phone (Cisco IP Phone 7962g) while maintaining the ability to force Auto Answer with Headset??
    Thanks for any ideas!

    Hi,
    It sounds more like training or organizational issue. If agents do it accidentally, usually this behavior disappeas in a couple of days (if agents were using other phones). And if they do it on-purpose, then supervisors should take care for this issue.
    Technically this issue may be resolved by placing some kind of plastic cap over the headset button, but then you should have a mechanism to activate a headset button, if it was deactivated (for excample, afther the phone reboots).
    Alternatively you may use longer cord and place the phone out of reach (not exactly "far-far away", but at least out of the hand reach. Plus, depending on the CallCenter software you use, agent may never need touch a phone, in most cases all interaction happens on the PC.
    Good luck,
    Mike / CCNP, CCVP, CCSP, CCDP, MCSE, CCIE Voice (written), etc.
    Headset Adapters for Cisco IP Phones

  • Why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

    why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

    Your question sounds more like a statement.
    It's just a phone afterall...

  • How do I set up a port on a SPA8000 to auto answer for a 2 way intercom/paging?

    I have a customer with an analog pbx system now that I am changing over to a sip system. They have a few lines that need to still have analog connectivity so I am installing a Cisco/Linksys SPA8000. One of my issues is with a 2-way PA system between their main office and shop. They have a Viking Model HF-3W paging system presently that allows them to communicate both ways without having to pick up a phone at the shop. I need to set the SPA8000 to have one port auto answer for this paging system but I am not sure how.

    See attached LV86 example. Open the properties dialog of the knob for more info about its configuration.
    Attachments:
    Log knob LV86.vi ‏7 KB

  • CK-7W and 6300 - auto answer / disable keyguard

    Hi,
    Just upgraded from a CARK-91 and 6310i to CK-7W ans 6300 - bluetooth connection (no cradle).
    The thing I miss about the old setup was that when I placed the 6310i into the MCC-1 cradle the keygaurd would be switched off and if the phone rang it would auto answer.
    I cant seem to find any way of doing this with the new setup. Can I not create some kind of profile or something on the phone for when it connects to the CK-7W to do this? It obviously knows it is connected to a Car Kit as the little red Car logo comes on.
    Any help appreciated - thanks!
    Also, one other thing pressing the CU-7 button does not always seem to terminate a call - any ideas??

    The CR-82 takes a charging cable (2mm) from the latest version CK-7W or a cigarette lighter charger such as the DC-4. It is therefore not a pop port lead as you might be expecting.
    The connection to the kit is then over Bluetooth.
    My Brother in law has a CK-7W with N73 Brodit Holder and Pop Port cable in his car - exactly your setup and it failed once due to a faulty cable. It was crushed through a panel gap in the car.
    I replaced it and no problems since..
    Hope this helps

  • Disable iPhoto auto launch w/ plist?

    I know you can disable iPhoto auto launch from the Image Capture app, but I would like to know where Image Capture saves its preferences so I can disable it by editing or replacing a plist.
    I need to change preferences on a whole lab of Macs, and I would prefer to do it remotely on all of them at once if possible.
    I looked but I can't seem to find where the preferences are saved. If anyone knows or knows of an easy way to do it let me know. Thanks.
    Power Mac G4   Mac OS X (10.4.7)  

    It seems to be this file:
    "/Users/yourname/Library/Preferences/ByHost/com.apple.ImageCapture2.00039343a1a8 .plist"
    At any rate, that is the file that contains this entry, as the sole thing in the file:
    HotPlugActionPath String /Applications/Image Capture.app
    So you can try adding/deleting this file and see if that will do what you want.
    Francine
    Francine
    Schwieder

  • Is it possible to disable the play button when exporting to exe or app files?

    Is it possible to disable the play button when exporting to exe or app files? Can the app just boot up without the playbutton?

    Are you talking about auto play option or the play button on Playbar?
    I just checked the EXE ran fine without requiring any play button to start as per my settings.
    Is this waht you are looking to achieve?
    Thanks,
    Anjaneai

  • Disable AnyConnect auto install upon connection

    Hi,
    How do I disable downloading a newer AC client when connecting?
    We are having all sorts of problems with a newer version not installing on Windows 8.0
    Thanks.

    You can disable the auto update by modifying the profile
    Q. Is it possible to turn off the automatic AnyConnect upgrade via ASA?
    A. Yes. Use one of these methods in order to turn off the automatic AnyConnect upgrade via the ASA:
    Adjust the profile on the ASA to disable updates.
    “false”
    Use a local policy to disable the AnyConnect downloader.
    BypassDownloader
    true
    The client does not check for any dynamic content present on the ASA,
         including profile updates, translations, customization, optional
         modules, and core software updates.
    true
    http://www.cisco.com/en/US/products/ps8411/products_qanda_item09186a00809aec31.shtml

  • Auto answer on 7940

    I am using a cisco 7940 ip phone in combination with ccme and I was wondering whether it is possible to automatically answer incoming calls. Thanks in advance!
    Jeroen

    Jeroen,
    There are at least a couple of options.
    With CME 4.0 and later you can use the Headset Auto-Answer feature which allows auto-answer when the headset key is activated. See the following link.
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8318.html#wp1075603
    Another option is to configure a DN as an intercom line which auto answers by default. There are some restrictions, such as the intercom DN can only be associated with one phone. Take a look at the following link.
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a0080611355.html#wp1050890
    Hope this helps. If so, please rate the post.
    Brandon

Maybe you are looking for

  • Itunes wont sync error message this computer is not authorized

    itunes will not sync my purchased songs to my new ipod touch, i get an error message that says, "some of the songs purchased cannot be transferred, this computer is not authorized, go to store, then authorize this computer."   I have done this over a

  • How can I get Bookmarks to ask me in which folder to store the bookmark?

    On my other computer & my wife's computer, when I click on 'Bookmarks' I am asked which folder I want to use to store the bookmark. It used to work that way on this computer but now it does not ask where to save the bookmark. I just saves it in the '

  • USB Mic no longer works with Skype after 7.1 updat...

    Using a USB headset with skype, worked with previous versions, works with other programs. I can hear people talk but they can't hear me! Skype detects the mic just fine but when I talk nobody can hear me.  I have tried updating drivers, re-installing

  • Acrobat Reader don't allow this file type to be opened! (Excel)

    I have several PDF files that were generated in a previous version of Adobe Acrobat. They are converted folders from outlook into PDF. These PDF's contain email communication about a certain topic. Some of the emails contain attachments, like excel w

  • Apps not connecting to Facebook

    A Few months ago I changed my email address for my Apple ID and iTunes and Facebook, but it seemed to be fine on my iPhone but my iPad for some reason won't allow me to change the information off of the Facebook section in the general tab, so now whe