Possible to do the 3d motion tracking text in video with only adobe products?

I am very interested in doing some 3d text in some video with motion tracking, such as you see in the opening shots in the show Fringe.
You will have a scene of maybe a street in the city, the camera is looking forward and moving, you have 3d block text that seems to be just hovering there up off the ground but looks like a real physical 3d object in the shot as the camera moves around.
I have been looking up tutorials for this in After effects on youtube but they always use other non adobe products as well such as boujou or 3ds max,  I am wondering if it is possible to make the same shot with only adobe products. If so, what whould I use other than after effects.  And lastly, can anyone point me to a good free tutorial using only adobe programs if there is one out there?
I have seen one video of someone adding text to a moving video but it was flat or plastered onto a wall and not the nice block letters that look like a sculpture in the video.
Thanks.

I am wondering if it is possible to make the same shot with only adobe products.
No, you can't and that settles all your other questions. For tutorials, refer to VideoCoPilot's matchmoving and set extension stuff, but even then you will need to at least use some comemrcial third-party plug-ins.
Mylenium

Similar Messages

  • Is it possible to go back to the beginning of a text message conversation with out hitting load earlier messages?

    is it possible to go back to the beginning of a text message conversation with out hitting load earlier messages?

    Nope. You just have to keep loading earlier messages.

  • Is it possible to move the movie- motion templates folder to an external disc?

    Is it possible to move the movie- motion templates folder to an external disc, my internal disc is almost full with just motion templates effects. What can i do and how?

    Take a look at this thread. I've not tried it.
    Russ

  • Is it possible to upgrade the iMac G3 (1998) to an iMac with Mac OS X Lion or Mountain Lion ?

    Is it possible to upgrade the iMac G3 (1998) to an iMac with Mac OS X Lion or Mountain Lion ?

    The 1998 iMac predates the introduction of Firewire.  So yes, it is limited to 10.3.9.  Sonnett did offer an upgrade to the iMac to allow it to have Firewire.  I don't know if this enabled 10.4 or not.   XPostfacto also offered unsupported 10.4 for older iMacs.   But Spotlight and Dashboard are very slow if you can't upgrade to a minimum of 256 MB of RAM, and preferably 512MB of RAM.   Look at http://www.everymac.com/ to find out your Max.

  • It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3?

    It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3? I'm trying to do so but it's not working correctly.

    Not sure this will help you !!!!
    https://blogs.oracle.com/proactivesupportEPM/entry/obiee_11_1_1_7
    Thanks,

  • Integrating the new text engine with other Adobe products?

    Hello,
    Is there any plan to integrate the new text engine with other
    adobe products that dos not support RTL languages?
    In famous products like AfterEffects or Director, No way to
    type correctly arabic text or (rtl) generally - The only way is
    converting the text to a graphic format in an external program !!
    And there is no Middle East versions for these products.
    So, I wish adobe thinks to take this step in near future.
    Thank you,

    I found this blog post about an unsupported feature in CS4 products for Arabic, Indic and other scripts.
    http://www.thomasphinney.com/tag/indesign/
    Since several Adobe products such as After Effects, Photoshop and Illustrator use the same text engine you might want to try copy-pasting Arabic text from the Photoshop CS4 template provided in this blog post to After Effects CS4 and see if it works.  AFAIK Director uses a different text engine from PS, AI and AE.
    http://www.thomasphinney.com/wp-content/uploads/2009/01/world-ready-photoshop.psd
    Good luck!
    Joe

  • Is it possible to render the clips individually and relink- such as with Color/fcp?

    I'm fairly new to Ae/ PP, and am trying to figure out a good workflow for grading (using resolve lite) Basically, I need to denoise my footage first (neat video) and then send that footage to Resolve, then back to pp. Now, this works fine with Resolve's scene detector as it can cut up the footage, but if there are any dissolves, etc, then I need to do this via xml instead.
    What I would like to do is: Edit in PP. Send to AE to denoise, render (the denoise need to happen before grading) and replace the original files with the new denoised clips in pp. Then send the xml to Resolve. So far this would work if it wasn't for AE rendering everything into one clip, eliminating the cuts/layers.
    Is it possible to render the clips individually and relink- such as with Color/fcp? If not, any other workflow that could work for me?
    Hope someone can help- dynamic link is driving me up the wall.

    Simply use Dynamic Link to send your whole timeline to AE or use AE's Premiere project import. Then once you have a working AE project, you can use scripts like rdPreCompose to create separate sub-comps for each clip which in turn you then can render separately. Still, the limitation will always be the kind of transitions you use. Essentialyl you should avoid anything that isn't a hard cut or simple cross dissolve 'cos there's no way to recreate it in AE without eating up the handle of your footage. You'd essentialyl be shooting yourself in teh foot if you jump ahead too far in Premiere and already add too much finishing there.
    Mylenium

  • Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?

    Hi All,
    I am facing issues in creating  adhoc network in Windows 8.1. After searching in internet, I found that adhoc works with 
    netsh commands.
    1. I have tried neths commands and able to get it work on windows 8.1, 
     but I want to do it through the WLAN APIs ie. WlanConnect ,
    2. I am able to initiate the adhoc network(on Windows 8.1) by using WlanConnect API and other device are also able to connect to the Windows8.1 initiated adhoc  network  but the DHCP is not working.
    -> clients are not able to get the IP address.
    Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?
    Thanks
    akhil

    Hi,
    Did you mean to write a program to implement that creating adhoc via UI? This should be development issue.
    But this is Windows 8.1 client forum and there is no professional on develop.
    To help you better, I suggest you submit a new case on MSDN forum to help to check your code as they will be more professional on your issue:
    This is the MSDN forum link.
    http://social.msdn.microsoft.com/Forums/ 
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.  Thank you for your understanding.
    Kate Li
    TechNet Community Support

  • I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product?  We are in full wedding season and am a little frustrated.  Photo mechanics opens them right up to download them.   I am using the Nikon software to convert them

    I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product?  We are in full wedding season and am a little frustrated.  Photo mechanics opens them right up to download them.   I am using the Nikon software to convert them into tiffs.  when is the camera raw update coming out.  I am not the only photographer with this issue check out all the chatter about it.

    This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
    Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

  • When i try to sync photos from iPhoto to my iPad using iTunes,  the "Selected Folders" option is greyed out with only the "All Folders" option available, how do i change this?

    When i try to sync photos from iPhoto to my iPad using iTunes,  the "Selected Folders" option is greyed out with only the "All Folders" option available, how do i change this?

    I add the keyword 'sync' to any photos I want added to the iPhone/iPad.
    Then, during the regular process of syncing the iPhone/iPad with my computer (mac), the photos with that keyword would be copied onto the iPhone, iPad.
    I've been doing it this way ever since I was shown how to; ie after I got my iPhone 2 years ago. And every time the process worked - until the last few weeks. Suddenly it doesn't do it any more.
    I believe I have upgraded software (either iTunes or iPhoto or both) during this period. I try to keep my software updated but have noticed previously that the new version often is disappointing.
    I've not tended to use Smart albums much.
    MM

  • The previous laptop in which I synchronised my ipad 2 crashed .So I am planning on synching it to another laptop but it is asking me to reset because it is already synchronised .So does the reset delete my photos and videos with apps ?

    The previous laptop in which I synchronised my ipad 2 crashed .So I am planning on synching it to another laptop but it is asking me to reset because it is already synchronised .So does the reset delete my photos and videos with apps ?
    I dont want the stuff in ipad get deleted please help......

    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
     Cheers, Tom

  • Motion tracking and exporting layers with the background video

    Is it possible to apply the motion tracking data to a new object in a new layer and then output, or export, that layer as an overlay plane (or perhaps in the alpha channel) so that the new object can be interactive (perhaps in a flash swf format)?
    I would like to create an interactive layer of objects (created through motion tracking) above a background video layer.
    Is After Effects the right tool for this job?

    You are severely oversimplifying the matter. Interaction means establishing rules and this in turn requires programming. Ergo, you absolutely cannot avoid Flash and ActionScript. You can certainly do the tracking in AE and then use CS4's "Export to Flash" feature to get the raw setup into Flash, but the work doesn't stop there. For older versions of AE you will need alternate ways to import the tracking data, e.g. by ways of text files, but really, this is much more a Flash topic than one for the AE community, so better ask your questions there.
    Mylenium

  • Is it possible to change the size of a text box on a photo book page

    I am a first-time user of the photo book application in iPhoto. I am wondering if it is possible to:
    1. change the size of a text box
    2. have more than one text box on a page
    3. move the text box around.
    Thanks, in advance, for any suggestions someone might have.
    newtongrammy

    I am a first-time user of the photo book application in iPhoto.
    I also was a first-time user, so I started using it. Exploring the possibilities, learning my way around.
    Thanks, in advance, for any suggestions someone might have.
    Click the ? icon
    Oops. Sorry, but you're in the wrong forum : iLife > iPhoto

  • Is it possible to print the content of a text entry box

    I would like to print the content of a text entry box as I've created a 'notepad' in captivate 6. Is it also possible to save content of a text entry box to a word document/web page using javascript?

    The content is stored in the associated variable of the TEB. Have a look at Jim Leichliter's website for instructions to get that variable out of Captivate.

  • When is the new motion tracking feature available

    I saw on the NAB notes that Motion tracking and feathered masks would come soon to Premiere Pro CC. Does anyone know when this will be?
    Thank
    Paul

    Soon.
    On the 18 of June there will be a big announcement.
    The 2014 release of Creative Cloud is coming: June 18th, 2014

Maybe you are looking for