Possible to Exchange SCREEN from DV6000 to G60?

Dear All,
I have a G60 634CA with screen going bad with black spots increasing by the day. Also have a good screen from DV6700.
Is it possible to exchange screens?
Please advice. Thanks

Can you give me what the full model number is of the DV6700 ?
Here is what comes up when I do a search.
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&dlc=en&lc=en&tool=&query=DV6700#N51
I looked through some of them and so far the ones I checked are running a 15.4 inch screen with a resolution of 1280 x 800 and all with a CCFL back light system.
The resolution on the G60 is 1366 x 768, but the back light system is the same as the DV6700 and that's what matters and the the size of course.
Even though the resolutions are different, the video card in the G60 should recognize the different resolution of 1280 x 800.
This is a big job _ have you taken apart a HP laptop before ?

Similar Messages

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
Your only options are to use something like ScreenRecycler mentioned above.
~Lyssa

Is it possible to perform a print screen from an af:commandButton?

Is it possible to perform a print screen from an af:commandButton?

You have a program in your applications/utilities folder called "Grab". Open it and you can copy an entire screen or a selection and save it into various formats. (I.E. Jpeg image).
or.........
• To take a picture of the whole screen, press Command-Shift-3.
• To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
• To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
• If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
• Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document
Cheers!
DALE

Is it possible to replicate the home screens from an ipad to an iphone?

is it possible to replicate the home screens from an ipad to an iphone?

Not really, as the iPad has more screen real estate & can thus show more icons, 24 vs 20 for the iPhone.

Print the Screen from Mobile App

Hi All,
As i am creating the new Syclo Mobile application for iPad, and in that i need to print the screen from the application, is it possible to do that or else i need to store in any type of the file then transfer to mail and then prin the document? kindly suggest me if any possible way to do that?
Tags edited by: Michael Appleby

Hi Jason,
Can we take a print out from syclo application using a external printer, if so please share me the link for know the syntax and code snippet if possible.
Thanks & Regards
R. Thiyagarajan

Is it possible to move files from corrupted sectors hard drive to a replacement one?

My 2011 macbook pro was recently diagnosed with bad sectors. I am looking to get a replacement hard drive, probably a 750 or 1 tb Seagate SATA. Do you think that is sufficient? I do not play games or do anything memory intensive. The most I do is watch a lot of movies.
Also, is it possible to move files from a corrupted sectors hard drive to the replacement? If so, how would I go about doing this?
Also, for the operating system, it is probably wrong, and can't check since my Mac pro won't get past half way on the start up loading screen.

Try a sector copy with CCC and enable using checksum file copy to insure integrity.
Then Data Rescue 4 - try demo before buying
Do a full erase of a drive before reusing.
Invest in SoftRAID.com going forward as it "looks for" weak sectors, alerts.
Also Google around but SMART Utility has been mentioned as an excellent program/utility -
When a drive has used any of its spare blocks from when it ships is #1 indicator of being time to replace.
And of course always have multiple backup sets, methods and know how to use and restore from. Even do a practice set. I would not use just TimeMachine for instance.
And for some, only a mirror array (minimum two but really consider three drive mirror, with stripe reads to improve performance) can allow pulling one, add a new member and still have a two drive mirror.
Cloud storage for backup. With OneDrive and Facebook backing up all the photos on all your devices, Macs and PCs as well as tablets and phones, you can have 100-200GB quite easily. And there is Google Drive and Amazon as well as others.
A new data drive, a drive to do all the recovery of files that were on the failed drive(s), and probably a clean system drive and use that as you recover and build your system back up.

Removing Exchange 2007 from SBS 2008 (In an Exchange 2010 Coexistance Scenario) - In order to remove 2007 Mailbox Objects from Active Directory and remove the SBS2008 server completely

I'm trying to remove Exchange 2007 from an SBS 2008 server
(Server 2008 Standard FE). My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers. We have two full blown DC's in the environment.
I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server. I can NOT seem to find a TechNet article that shows me how
to proceed in this kind of scenario. I am trying to use the TechNet article:
http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard.
When I go to Disable Mailboxes I get the following error:
Microsoft Exchange Error
Action 'Disable' could not be performed on object 'Username (edited)'.
Username (edited)
Failed
Error:
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
OK
I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010. I just want
to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
Can someone point me in the right direction?
Thanks!

Hi,
Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please refer to following articles and check if can help you.
Transition
from Small Business Server to Standard Windows Server
Removing SBS 2008 –
Step 1: Exchange 2007
Removing SBS 2008 – Step 2:
ADCS
Removing
SBS 2008 – Step 3: remove from domain / DCPROMO
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Hope this helps.
Best regards,
Justin Gu

Pricing error in customer invoice-"Error in converting exchange rate from to RUB"

Hello Friends,
Please help me to solve the below issue .
When user created customer invoice, system showed pricing error for last line item . The error was for cost condition type which did not determined any value and had "Red" indicator . The error message is -"Condition ZXXX: Error in converting exchange rate from to RUB" . Message No.V1208 . User could save the invoice but accounting doc was not created .
In this case-->
-Document currency is RUB
-Currency RUB updated in customer master .
-Currency RUB updated in material master .
-Con.origin is A for this condition type .
Please tell me why this error message occurred ?
Regards,
Sandeep N.

Hi,
Below are the screen shots for OB22 and invoice :
Regards,
Sandeep N.

Error in converting exchange rate from USD to INR

Dear Experts,
My client is Export Business & when he is creating sales documents the system gives the error as:
Condition VPRS: Error in converting exchange rate from USD to INR
Message no. V1208
Diagnosis
An error has occurred during currency conversion.
The following causes are possible:
There is no valid exchange rate
The calculation procedure was incorrect
Procedure
Check whether there is a valid exchange rate from VPRS to USD in Customizing, in the chapter "Define conversion factors for currency conversion", and supplement it as necessary.
If you do not have the authorization to do this yourself, contact your system administrator.
so expecting the solution for the same
Thanks & Regards,
SPT

Hi,
you have to maintain conversion rate from USD to INR in FI, img, sap netweaver, general setting,currencies, currency conversion rates
maintain conversion rate and revert back
regards,
sadanandam kasarla
Edited by: Sadanandam Kasarla on Mar 5, 2009 11:20 AM

When is it possible to exchange your iPhone 4s for an iPhone 5s?

When is it possible to exchange your iPhone 4s for an iPhone 5s? After 3 years, my iPhone 4s is no longer working and I have tried everything, including going to the apple store to get it repaired. It will not sync with the music I have on my laptop: new or deleted, and it also skips through songs on itunes on my iphone. It has greyed out songs and won't play any of them. It also changes randomly from vibrate to ring on and off without me touching the switch on the side. It's like my phone is possessed or something. I have tried everything and have decided to soon buy an iphone 5s. Can I get some sort of discount or exhange because the problem is out of my hands? Also, I have recieved a mophie iphone 4s case for christmas. It is buy the iphone 5s, will I be able to exhange my mophie phone case for an iphone 5s mophie phone case?

Apple will exchange your defective iPhone for one of the same model for their standard out-of-warranty exchange price. They will not upgrade you to an iPhone 5S as part of that program. Apple does accept trade-ins toward purchase of a new iPhone through retail Apple Stores in the US. I've not seen the amount they will allow, so you'll need to talk to your local Apple Store. In a few other countries Apple also works with a company who will give you some return on an existing device; select your country as appropriate on this page:
http://www.apple.com/recycling/
Similar programs are available in a few other countries, and some dealers may have their own trade-in programs.
None, however, will give you much for a phone that has hardware issues, if they'll give you anything at all.
I have recieved a mophie iphone 4s case for christmas. It is buy the iphone 5s, will I be able to exhange my mophie phone case for an iphone 5s mophie phone case?
That would depend on who you bought the case from and their return policies. If you bought it from Apple, then you have fourteen days from date of purchase to return it. If you purchased from a dealer, you'll have to ask the dealer about a return.
Regards.

Variable entry screen from BW in webdynpro

Hi all,
    can I use the variable entry screen for a BEx query to access all the user inputted values in a webdynpro application.
    I want to launch this screen from within the webdynpro application, and once the user presses "Execute", I want all the user selections back in the application.
    Is this possible at all?
Thanks,
Satyajit.

Hi Satyajit,
Since the variable entry screen orignates from the BI system in conjunction with a web template it cannot be invoked separately. Do you plan to run the web application within a Web Dynpro application (i.e. an iFrame)? One option would be to use the BI Java SDK to populate the values in a user selection screen and then use the user's selection to execute a query or MDX statement. Of course you Web Dynpro app is responsible for rendering the result set.
Regards,
Oliver

Lcd Needs to Be replaced on macbook air 13 mid 2012 model a1466. Is an screen from MBA 13 mid 2011 model a1369 also compatible?

Lcd Needs to Be replaced on macbook air 13 mid 2012 model a1466. Is an screen from MBA 13 mid 2011 model a1369 also compatible?

Well that's only a possibility, not likely. I'll stick with Mac as much as I can, which I imagine will mostly be ok. If I have to, I'll use their computers in class and do PC homework assignments from home on my more powerful iMac. The only thing I really thought about before buying it was its portability and the fact that I won't be using it for actual programming jobs after school. This is merely to get me through school.

Calling a Selection Screen from a Function Module/Method

Hi,
I would like to call a selection screen from a function module or method. I understand it is not possible by the definition. Are there any alternative options as I am looking for the Variants Save option on the screen. Any thoughts?
Thanks
Raghav

Since i don't know your exact requirements (standard SAP selection screen? your own selection screen?) the onl;y thing i can come up with is:
1. in your function pool create your own screen with a subscreen area
2. create your own selection screen as a subscreen.
3. include the selection subscreen in the first screen
4. call the first screen in your function.

Is it possible to change screen of iphone 6

i have purchased i phone 6 before 3 months , today i got creak screen. so is it possible to change screen ? i am from india

My iPhone is not eligible for warranty service. What are my service options?
There are two service options for an iPhone that is not eligible for warranty service:
Battery Replacement Service
If your iPhone requires service due to the battery’s diminished ability to hold an electrical charge and it is not covered under Apple's warranty, the AppleCare Protection Plan, or statutory consumer rights, please contact an iPhone Authorized Service Provider.
Out-of-Warranty Service
Please contact an iPhone Authorized Service Provider for out-of-warranty service options.
These are your only options in India

Is there a way to keep the screen from lighting up every time an email comes in, but still be able to see the email on the lock screen when you press the home button?

Is there a way to keep the screen from lighting up everytime an email comes in, but still be able to see the email on the lock screen when you press the home button? This is killing my battery, but also is kinda the whole point of the notification center in my mind.

This is something I've been wondering. I am a bit like you, I like being able to have a glance at emails or Facebook updates without having to log in, and I think it would be great to be able to turn off the notification switching the screen on, especially for emails as I do get a lot, and Facebook, but I somehow doubt it is possible.
I am currently monitoring how much this eats up my battery charge. On a normal day, after an overnight charge, I would probably still have 30%-40% left when I leave work in the evening. Today, I was down to 48% by lunchtime, where I've usually got a good 60-70% left... Might have to turn email notifications off on lock screen until it's possible to have them appearing in the list without flashing me...

Possible to Exchange SCREEN from DV6000 to G60?

Similar Messages

Maybe you are looking for