Possible to fill in local amount in FB50?

Hi all!
My customer have a problem. Local currency is SEK (Swedish Crones) and wants to make a booking from bank account in EUR to bank account in SEK.
We have received a bank account statement from the bank where we can se that the bookings have been 96 693,1 EUR which is equal to 1 000 000 SEK (which has given the bank an exchange rate of 10,342).
When going to fb50, entering document currency EUR  and document amount 96 693,1 and then enter the exchange rate 10,342 I see that this amount is equal to 1 000 000,4 SEK, which is not what I wan't to post. Is it possible to enter the amount both in document amount and in local currency amount without entering the exchange rate (since this is given very small exchange rate differences)? I've tried this in fb60 and this is possible there but not such an oppurtunity in fb50. Can anyone help?
Many thanks in advance,
Åsa Folkesson

Hi and thank you very much for your answer!
When I do what you ask me to do, everything looks fine. But when I try to save I get a message:
"Balance in Group currency SEK is too large for automatic correction"
How can I solve this?
Many thanks in advance

Similar Messages

  • Difference between local amount and document amount in the same currency

    Dear All,
    Why different between local amount and document amount with the same currency in some FI document line items? Both currency is 'TWD' and update currecy(BSEG-PSWSL) is 'USD'.
    What is the purpose of update currency(BSEG-PSWSL) and update amount(BSEG-PSWBT) ?
    Does update curreny cause the difference mentioned above?
    Thanks all in advance.
    Best regards,
    SAP user

    Dear Sir,
    Thanks for your kindly response!
    These fields of the FI document header are following:
    Local currency 1(BKPF-HWAER) : TWD
    Local currency 2(BKPF-HWAE2) : null
    Local currency 3(BKPF-HWAE3) : null
    Document currency (BKPF-WAERS) : TWD
    Transcation currency means which field ?
    Transaction code (BKPF-TCODE) : FB1S
    The line items as following :
    Itm PK Account    Account  short text   Amount
    1   40   21302500  A/E-Maintenance     1,119,350
    2   50   21302500  A/E-Maintenance     1,119,350-
    Amount in document currency is 1,119,350(TWD) but amount in local currency is 1,087,998(TWD).
    The line item's additional data :
    Amount for Updating in General Ledger : 33,894.02(USD)
    Thanks a lot !!
    Best regards,
    SAP user

  • HT5071 Is it possible to call a locally installed ibook from a hyperlink? What about to a bookmark?

    Is it possible to call a locally installed ibook from a hyperlink? What about to a bookmarked page?
    I have 2 questions..
    1. Can I send a link via email that when launched will open an ibook that has already been downloaded to the bookshelf?
    2. If question 1 is possible, can I take it a step further and call a bookmark, i.e. chapter 3.
    Our company has it's own appstore and I want to send out links to sections of the ibooks using bookmarks or at the very least take them to the start of the ibook.
    I don't need to give them a link to install the ibook as they already have it installed.
    Any help would be much appreciated.
    Chris.

    That would be cool, but it's not possible. The ibook is not accessible by URL in the user's bookshelf.

  • Is it possible to add a target amount to a query

    If I have a number being disagregated by Cost Center is it possible to add a target amount on a cost center level? I know we could add an attribute to Cost Center that hold a value for this target, but that could not be used in calculations or be shown in chart compared to the actuals. Does this have to be added to the cube as a Key Figure or is there an easier way?

    Hi.
    You can use IP module to enter/update target KF.
    Regards.

  • HT2242 Is it possible to keep the local country but have it display in my language?

    Is it possible to keep the local country but have it display in my language?
    For example I live in Sweden but am English so would like to have the local setting still for Sweden but all text displayed as English.

    Sorry but no, not if you're referring to the iTunes Store. The iTunes Store for Sweden displays only in Swedish; English is not an option.
    Regards.

  • Roll-up not possible; no filled aggregates available

    hi sapgurus,
            I am facing the following while running my process chains:
    Roll-up not possible; no filled aggregates available
    Rollup is ended with error;
    My problem i don't have sufficient authorization to cube to do the manual roll
    Please help me,and how to proceed with this error.

    ashwin,
      Thanks for your reply.
      Though i am not able to see the data in cube,i am able to see the aggregates in the cube by clicking on aggregates button on right side of the cube.
    I observed that button "filled/switched off" is red should i activate them .How to do that?.
    Please help me with this?.
    thanks in advance.
    Message was edited by:
            NRUPAL CHOWDARY

  • If is possible to add new local var to sequence from the outside?

    If is possible to add new local var to sequence from the outside?
    I mean insert a new local variable to Sequence.Locals list or via expression, or by LabView VI (Sequence Context). or any another way.
    Thanks.

    Hi,
    The simplest way would be to use the API TS method PropertyObject.SetValBoolean, PropertyObject.SetValNumber or PropertyObject.Set ValString. With the SequenceContext you create a PropertyObject using the method SequenceContext.AsPropertyObject, which you use as the reference for the the SetVal method.
    For the SetVal method, pass the full lookup string of your variable eg "Locals.MyString" and set the option parameter to 0x01 (insert if missing).
    If you are calling this from LabVIEW, then use the SetVal property VI.
    This will insert a varable into the Locals that is "in scope" of the step that is performing the task. 
    In the TestStand Help - "Using the API in Different Programming Languages" and in the TestStand User manuals there is more information to help you.
    This will only make a runtime version of your Local. ie when your sequencefile stop executing your Local will not exist in the Static version of the Sequence File.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • (LR5) Possible to synchronize a modification-amount, without unifying the settings ?

    (LR5) Possible to synchronize a modification-amount, without unifying the settings ?
    Assume I have ten completely different photos i each optimized individually.
    Thus, sliders (not speaking about curves) of, say, color-tint  or temperature; could/would be each on a different setting.
    Is it possible to intervene on such a slider collectively without changing their individual starting-point?
    "Every selected-photo's  tint-slider  go up by 7 values,  without synchronizing the final setting itself ?
    ( first photo slider position of  -7  becomes 0,   second photo was 2 and becomes 9, etc) ?
    Auto-sync does not do that.
    Sync does not.
    Is there a plug-in for enabling this?
    ignoring the solution ?
    Impossible ?
    Thank You for any reply soon ! :-)

    Yes:
    * Without a plugin: limited adjustments are available via Quick Develop section.
    * With plugin: comprehensive support is available via plugins like Gazoo (free), which I wrote.
    Rob

  • "Applications Installed" tab - Is it possible to fill list from "Install Application" task sequence?

    Hello!
    I am using Configuration Manager 2012 with MDT 2012 Update 1.
    All of my application installations are done via the "Install Application" task sequence step (some as a list, and some with variable).
    I know the "Applications Installed" tab on the summary is specifically for the UDI, but is it possible to fill with applications that were installed using the "Install Application" step instead?

    No. This is for Applications installed by the UDI Wizard only.
    But you can add all you Application to the UDI Wizard, and make them mandatory, so the user wont uncheck them.
    Thanks for the suggestion, but we will not be using the UDI for applications. We have a script that dynamically builds an application list (variable) and installs the software based on what the user has access to via deployments.
    I am still holding out hope for this to be possible though. It's all based on various scripts, so my feeling is that somehow I should be able to populate that list by some other means.
    My disadvantage is that I'm not very good with vb scripts, so I'm having a hard time figuring out where the "Applications Installed" tab gets its data from.

  • Is it possible to fill item number on a PO autocreated from PR?

    Hi,
    I have created a non-catalog PR (i.e. without item number) and then autocreated to PO.
    On the PO, the item number field is protected. Is it possible for me to fill the item number? Thanks.
    Regards
    Leo

    Hi Leo,
    yes,I think you can modify the requisition lines during "autocreate" process to PO.
    Make sure the profile "PO: Restrict Requisition line modify to quantity split" to NO.
    pls see the note below:-
    Use the Modify Lines window to split an existing requisition line into multiple requisition lines that represent the same or different items. For example, if the requisition line quantity is so large that a single supplier cannot fill the entire order by the need-by date, then you need to fill this order from more than one supplier. On the other hand, if you have a requisition line item that contains parts that you want to order as unique items, you can explode the requisition line into several lines. After you modify a requisition line, you cannot modify the new requisition line(s) again.
    Note: You cannot modify requisition lines for outside processing items and when you are using encumbrance accounting or budgetary control.
    Thanks
    -Arif.

  • Is it possible to move the local CD database from Windows to Mac?

    I have/had iTunes installed on a Windows box. Windows knows all my CD and track titles (some customised from those in the online CDDB). There are more than 250 CDs, so it is a lot of data (if I have to retype it all...)
    I have recently moved to a Mac. The ripped library files copied across just fine (even kept the album artwork).
    However, the Mac doesn't know any CD/track titles, so when I insert a CD, there are no names. The Mac is not on the net, and probably never will be. I want to move the copy of the local CD database from the windows machine to the Mac. Is this possible? How?
    Dual G4 Tower   Mac OS X (10.3.9)   Also Windows XP
    Dual G4 Tower   Mac OS X (10.3.9)   Also Windows XP

    I imagine you will need to network your PC with your Mac to transfer or transfer your Library from your PC to an external drive then hook this up to your Mac and transfer.

  • Automatic filling of wagetype amount in IT0008

    Hi All
    Can anybody please tell me what to customize to get an automatic filling of a wage type in IT0008? I have filled the groups and level tabels, which is visible in when choosing the groups and levels on user level. These groups and levels are connected to a Wage type and this wage type is the default wage type in IT0008.
    At the moment I am able to fill in (and save) whatever amount I want, but when I leave it empty, I get the following message:
    IndVal of wage type AMBT: No entry in table T510 for key on 01.01.2004
    Message no. RP 032
    The date mentioned in the error refers to the date on the bottom left hand in the screen. This is the begin date of the added wage types...
    It should be simple, but I am lost.... 
    Thanks for your help!
    SD

    Hi,
    yes you are right. TARIF A
    The TARIF module uses pay scale data that is taken from the pay scale groups and levels entered in the Basic Pay infotype.
    The module TARIF has four variants (A - D), that have the following meaning:
    A  Valuation is based on the pay scale group and level
    B  Valuation is based on pay scale group/level and specific wage type
    C  Valuation does not depend on pay scale level
    D  Valuation does not depend on pay scale group or level.
    check the table v_t539j for valuation of wag type with PRZNT.
    and the check the table V_T510 with proper date the wage types are included.
    Regards,
    mohammed

  • Is it possible to connect a local file server to 365 onedrive via sharepoint?

    We have our local 2012 file server with everyones document directories and common shares. We use AD and have all user accounts defined. As part of our K12 licensing we have Office 365 E1 for all staff, so I set up the Azure AD Sync and we now have all the
    staff accounts set up in 365 and people can work on Office from home.
    The problem is that everyone wants their files from home as well, ideally in their OneDrive. OneDrive for Business doesn't seem to have a mechanism to sync all the files from our file server to each persons OneDrive automatically. I read somewhere that I
    can do it by using SharePoint as a intermediary - that is I can set up a local sharepoint that syncs the fileserver to sharepoint, then I can set up the 365 sharepoint to sync between the onprem sharepoint and the 365 OneDrives.
    This seems like a massive pain but is it doable? is there a better way or is it not possible and sharepoint/local files will always be separate from Onedrive?  it seems like such a common and obvious request for people who can't dump local file servers.
    Mark

    not all to each, just duplicating our current system. Each user has a few hundred mb of files (on average) and there is a common drive with a few hundred gb.
    Right now the assumption by Microsoft is that each user will individually install the local Onedrive app and sync their C: drive documents folder to their Onedrive. In our case we have the documents stored centrally and the onedrive app will not sync a network
    folder. I am looking for some method of making it happen.

  • Is it possible to fill Image field by FDF?

    I can fill text data to other type of field. But if I have image url or path, how do I fill to Image field? possible?
    %FDF-1.2
    1 0 obj
    << /FDF
    << /Fields
    << /T (form1[0].page1[0].TextField1[0]) /V (Hello) >>
    << /T (form1[0].page1[0].ImageField1[0]) /V (?????? HOW ???????) >>
    /F (http://localhost/TestFDFImageField/Test.pdf)
    >>
    >>
    endobj
    trailer
    <</Root 1 0 R>>
    %%EOF
    Anybody knows, please help. Thanks.

    It's a kluge, but here is one way, grouped two thermometers, selected fill from bottom and fill from top for each and did some creative coloring.
    Putnam Monroe
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion
    Attachments:
    thermometer[2].ctl ‏14 KB

  • Is it possible to fill images with color in Keynote???

    I have a map of europe I made in Photoshop showing different empires before World War I. Is it possible to apply a colorize effect to my layers when I bring them into Keynote.
    I would prefer to decide what colors the layers should be in Keynote rather than in Photoshop.
    Also can Keynote import a multi-layered photoshop file?
    Thanks very much in advance.
    Message was edited by: Nicholas Natteau1

    You could also try using a map that has the countries included as vectors. Here's a PowerPoint file I found.
    http://www.presentationmagazine.com/world-maps-vector-editable-507.htm
    Then, you can set the fill just as you're thinking about. You could even make the fill an image this way.

Maybe you are looking for