Possible to have a gradient applied to a stroke?

Hi there,
Is it possible to have a stroke of a vector object have a gradient color? Obviously, this is the case with fills, but I am unsure if it is possible with strokes.
Thanks,
Laz

I assume you're in Illustrator? If so, you can also just select your object then go: "object" -> "expand", check the "fill" and "stroke" boxes. This will turn the stroke into a compound shape and you can apply a gradient to it.

Similar Messages

Is it possible to have two fonts apply to one string? or use symbols amongst normal font?

Hi,
Is it possible to apply two different fonts to one string, or use symbols amongst normal font? My purpose is to display an Omega symbol after some number.
".99982 Ω" or "-180 φ"
I am using version 6.0,
Thanks in advance!
Solved!
Go to Solution.

It's not possible to use differnt fonts in the same text control (string, text message, text box, listbox...) or in the label for any control.
An alternative solution can be to use a font that natively includes the letters / symbols you need. Within CVI 6 native fonts you can use NISystemMetaFont which includes uppercase omega letter together with other commonly used greek letters (and uppercase / lowercase alphabet and numbers, of course ).
In charmap the font is seen as NISYSTEM: with that program you can see all characters included in the font file and select / copy each of them to paste in CVI controls if you need it.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Could my iMac possibly just have a temporary case of heat stroke?

After working on my iMac off and on all day, I left it up and running when I stepped out of the room briefly and returned to find it had shut down. This particular Mac is networked to a PowerMac G4 and dual core iMac, both of which seem to be working fine .. . (as was this one, until this problem started).
Hitting the power button did not get it up and running, although the chime seemed to work; however the screen remained black. It was hard to tell, but I also think the power switch was working a little erratically, because at various times it seemed like it required eiher a "forced quit" and restart, restart with the shift key on — or sometimes just a restart alone to ring the chimes. Bottom line though, was that while the on button sometimes lights up, the screen remains black.
Unfortunately, my optical slot drive died about six months ago which is how I ended up with the dual core iMac — but so far have not used it much, since most of the software I normally rely on is not yet available for the new model. So instead, I have been switching back and forth from one computer to the next, as needed. However, because of the drive problem, I have been unable to boot from either the hardware diagnostic or system CDs to look for or repair possible errors.
Although the two iMacs currently are connected via Firewire, I have not yet taken time to see if I can transfer and save the most important data — hoping to get all systems up and working properly first.
More importantly, I'm also hoping one of you Mac wizards will tell me the problem is just weather-related, since the temp outdoor has been in the low to mid-90s all week and probably even hotter indoors. Is there any point in just letting things cool down overnight instead of repeatedly hitting the "on button" . . . or does it sound like my goose is really cooked?
Anyone have another idea of how I can rescusitate this machine?

Update:
Sorry to report that while I waited in frustration for some sort of response, my iMac gave up and died.
Since initially it looked like it might "only" be a power problem (not worth repairing, as the CD drive also pooped out about 6 months ago), I was arranging to have the drive reincarnated as an external drive, only to learn that the drive, too, was on its last legs. I have no way of knowing what's on the drive, so am still trying to decide if it's worth paying for data recovery. Luckily I think have backups of the most important doocs.

Is it possible to have an Opaque Border

Is it possible to have a transparent border? I'm asking because I'm putting a component into one of Hans Mullers wizzzy MultiSplitPanes which in turn is opaque because It's used inside a TabbedPane (XP colours these with a white background gradient .i.e. not dialog grey).
The tree with scrollpane weren't quite centered so a slapped an empty border on it with insets to make it look square, but the border - even empty ones appear opaque when used inside a transparent component?! Anyone seen this before?
nb.I'd guess it would be possible to nest the scrollpane inside yet another transparent panel with a gridbag insets of (2,2,3,2).. but that seems even more of a pain just to shuffle up one pixel.
This should illustrate the problem, you shouldnt see any grey around the tree:
import javax.swing.*;
import javax.swing.border.EmptyBorder;
import java.awt.*;
public class BorderShouldNotBeSeen {
    public static void main(String[] args) {
        JFrame frame = new JFrame();
        JPanel panel = new JPanel();
        frame.getContentPane().add(panel);
        // make it really obvious, should see red right up to the darker scrollpane/tree border
        frame.getContentPane().setBackground(Color.RED);
        panel.setOpaque(false);
        // just BorderFactory.createEmptyBorder() didnt cut it.. so then I used..
        class MyBorder extends EmptyBorder {
            public MyBorder(Insets insets) {
                super(insets);
            public boolean isBorderOpaque() {
                // ..guess what it still looks opaque!
                return false;
        JScrollPane treePane = new JScrollPane(new JTree());
        treePane.setBorder(BorderFactory.createCompoundBorder(
                new MyBorder(new Insets(10, 10, 11, 10)), treePane.getBorder()));
        panel.add(treePane);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.setVisible(true);
}- Richard

Wow, yes that fixes it - obvious when you think about it, the borders were just increasing the insets on the component. Just didn't see it.. Thanks.

Is it possible to have too many keyframes in one project in Premiere?

Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digi

Bill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi

Is it possible to have 2 mail programmes on my macbook pro? one for business related emails and one personal. I dont want all the emails in one mail programme!

Is it possible to have 2 mail programmes on my macbook pro? one for business related emails and one personal. I dont want all the emails in one mail programme. At the moment i have 2 personal email address being sent to my mail but because of receiving huge numbers of work emails it would be good to keep them seperate, what is the best way of doing this?

if i use the one mail programme can it separate the incoming mail from the different email accounts into 2 folders without me having to do it manually?
Yes, you can. Nearly all email software can do this. It involves creating two folders and a Rule for each folder.
Maybe call one folder Personal Mail, the other Work Mail (Apple Mail calls folders Mailboxes). One Rule would route all mail from your personal email account into the Personal Mail folder; the other Rule would route all mail from your work email account into the Work Mail folder. It's actually easy to do, all you have to do is click a few things and the rule is set up. Once the Rule is written you can also apply it to existing messages already downloaded to your Mac.
In Apple Mail, Rules are under Preferences > Rules. Follow the prompts to create a rule like this:
If = Any
Account = my Personal account (select the name of your personal email account)
Perform the following actions: Move Message to Mailbox = my Personal Mail (select the name of your Personal Mail folder (aka mailbox))
This rule says, "take any message that comes in from my Personal Account and move it to my Personal Mail mailbox (folder)"
Create a similar rule for your Work email.

Ist possible to havea ASN(Inbound Del) for schedule line?

Dear Gurus,
I am not having much knowledge about the inbound delivery... ist possible to have a inbound delivery for a Schedule line?
Regards,
Kumar

HI,
YES.. It is possible. check the below link and the pictorial representation
http://help.sap.com/saphelp_47x200/helpdata/en/75/ee13e855c811d189900000e8322d00/frameset.htm
in this check vendor confirmations -- Procurement Using Vendor Confirmations -
Confirmations from Materials Planning Viewpoint -
Influence of Confirmations on Materials Planning
Inbound Data contains
Document Header
The general data relevant for the inbound delivery is stored in the document header. This data is valid for the entire document. This data may include:
Goods receiving point
Scheduling data (goods receipt date or delivery date, for example)
Weights and volumes for the entire inbound delivery
Vendor number
Route
Document Items
In the items, you find data that applies to one particular item. This data may include:
Material number
Delivery quantity
Plant and storage location specifications
Putaway date
Weights and volumes of the individual items
Thanks & Regards,
Kiran

In a ADG is it possible to have a pie chart in a summary row?

In a ADG is it possible to have a pie chart in a summary row?
The segments would be worked out from a funtion applied to the data
in that grouping.
Thanks :)

The JTable is a tabular component. So it will always have enough columns to display the maximum row length. you don't have to pur a value in every cell.
There are methods in JTable to remove horizontal and vertical lines and you could implement a renderer to make empty cells look like the background.
Cheers
DB

Is it possible to create a gradient mesh object with 2 spot colors which separates & prints as a 2 color print job?

I have a gradient mesh object which uses 2 spot color values (including some tints of those 2 colours) which I'd like to print as a 2 color print job. Is this possible? If not, any suggestions as to how I should proceed? The print job MUST be 2 color. Ideally I don't want to use raster objects but if I have to would appreciate any advice on the easiest way to transform my 2 color mesh object into a matching duotone raster object.

I'd really say it's that PPD with the new n-space features of CS3 and CS4. If I use your PPD I get the same shoddy results you do with the postscript file. In fact, Acrobat Distiller errors with a log...
<PDFX ISO="15930-1:2001" COMPLIANT="false">
PDF/X Compliance Report
1. Color
   The following pages are separated plates:
      Page 1, Occurrences: 1
      Page 2, Occurrences: 1
      Page 3, Occurrences: 1
      Page 4, Occurrences: 1
   Violation. The use of %%PlateColor is not permitted and was found in the document. Occurrences: 7
   Violations: The total found in this section was 11.
2. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 11.
   This document does not pass PDF/X-1a:2001 compliance checks.
</PDFX>
%%[ Warning: Did not pass PDF/X compliance tests. No PDF file produced. ] %%
If I use your PPD, print your AI file to a postscript file, then simply open the resulting Postscript file with AICS4, I see the same bad results that I showed in the movie. I think the PPD can't handle the new method of breaking out spots in gradients. Just to test this theory... try a different PPD and see if that works, at least to show the seps properly.

When it will be possible to have the armenian keyboard on the iPad iOS6?

when it will be possible to have the armenian keyboard on the iPad iOS6?

Hey Mantas,
Do not expect that feature any time soon. I do not even see that being a feature this year.
Considering all that is going on and required to be finished and sorted a lot more is/will need to be done.
In terms of what you can do I have done things like used the refer a friend form which you can style and use that to send emails out to the needed people. I have submitted multiple web forms with ajax etc as well.
You have the custom fields for the people and emails (if not you can add them) and you can use those to send emails off to people, you just do not have a workflow so your not pestered with it but the notification message is the one that goes out and can have a template applied.
So there is a number of things you can do to get that going along those lines. I have done a few variations of this on different sites.
Warning note though - Ajax submission for custom web forms has a total character limit (all fields) of 1024 characters, which is not a lot.

Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?

Howdy!
I'll bet I'm not the only one wishing for this. Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise. In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
This can be a critical issue: keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
A movie's topical hierarchy could be along these lines, for example ...
Section 1 - National Brands
What are National Brands?
Why Are They Important to Our Business?
Working with Nat. Brands
Practice Your Knowledge
Section 2 - International Brands
What are International Brands?
Why Are They Important to Our Business?
Working with Intl. Brands
Practice Your Knowledge
You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
Has anyone solved for this need yet?
I'm all ears, and you'd be doing learners of the world a huge favor.
Thanks!

Hi, Jim.
Thanks for being 'on the case' and looking into this so quickly. Your
findings are encouraging, although my user base is generally working with
IE 6 and FP8 or 9.
Since the only thing I may influence is getting IT to help push out FP10,
I'm hoping it's more of a player- than a browser-version issue.
I'll test things out by Monday and let you know the results. Wish me luck!
Dave
                                                                                From:       Jim Leichliter <[email protected]>
To:         Dave Tressler <[email protected]>
Date:       03/26/2010 06:02 PM
Subject:    Possible to Have ToC Default to Show Only Top Level (collapse
              sublevels)?
Dave,
I just tested this on my local web server and it worked fine. I created a
blank project with 8 slides. Created my TOC with grouping... 2 slides in
each group. I turned on self paced learning. I tried with and without the
widget and it picked up where I left off in either case. See
https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en.
I published using FP10 and IE8 to view. Notice any difference between
your project and this one?
Thanks,
Jim Leichliter

Is it possible to have an attachment within a pdf doc print at the same time the main doc prints?

Okay, so this may be kind of a weird question. We have some users who are wanting to add a page to an already existing xml document and correct me if I'm wrong, but I've read that it's not possible to add/delete pages from a pdf that's in xml format. Since that is not possible, I have added the page to the xml document as an attachment. Now what I am wanting to know is if it is possible to have the attachment print out at the same time as the main document. We are using the latest version of Adobe Reader and I have access to Adobe Acrobat Standard 9 & 10 and then I have access to Adobe Acrobat Pro 7. I've been unable to find anyting via google or by searching this forum so hopefully I'll draw out some kind of smart cookies and we'll get this figured out. I appreciate any and all input!
Thanks,

I know of no way to do this with Reader or XML.

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

E72 - Possible to have more than 2 email accounts ...

E72
So is it possible to have more than 2 email accounts shown at the home screen?
Currently one is set as primary and the other as secondary.. I have 4 email addresses I want shown at the main screen..
Please help.

jane999 wrote:
Basically I want to share A1 with somebody else and we both use yahoo email. So I need to sign out before she can sign in. Any way to do that?
Thanks in advance for any help!
You didn't specify whether you are using the "official" Yahoo mail app, or some other email application like K-9. But either of those allow for the specification of multiple email accounts, and you don't even really need to sign in/out. Once you set up the accounts within the app, just select the email account that you want to view. It might be a little more problematic if you want to prevent each other from being able to see the other's email, however.

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

Possible to have a gradient applied to a stroke?

Similar Messages

Maybe you are looking for