Possible to identify workbooks based on other workbooks?

We have workbooks that are owned by a Discoverer Admin user and shared with all Discoverer Users. Users occasionally want to personalize these reports and save the results as their own workbook. This saves the time associated with making the desired changes to the Admin report each time they run the report or making the changes in Excel after exporting. The problem is that if the Admin makes any changes to the original report, the user remains unaware of those changes. This is not an issue if the Admin changes are of the formatting variety, but in cases where the Admin is changing a calculation or something that will affect the data, the user wants to know about those changes so they may update their version of the report. Is there any tie between the original Admin report and the new user report that could be utilized to identify users who should be informed of the Admin changes?
-Tracy

Hi Tracy,
there is no connection between those workbooks, the adjusted reports are saved as new reports and
there is no pointer to the original report it was created from.
Tamir

Similar Messages

How can I make a new genius mix? Apple has made two automatically, but I would like one based on other genres within my iTunes library. I have tried updating my genius mixes to no avail.

How can I make a new genius mix? I do not want to make a genius playlist. Genius has already created two mixes but I would like another based on other genres within my extensive music library. I have tried updating Genius from Store>Update Genius but to no avail. Thank you!

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

Is it is possible to identify Heading level, Title, Header, Footer, Paragraph in PDF using SDk or Script

Hi Friends
Is it is possible to identify Heading level, Title, Header, Footer, Paragraph in PDF using SDK or Script

In an ordinary PDF there is nothing to identify, the information does not exist. Just text at locations, the structure is entirely in the mind of the viewer. For tagged PDFs, yes. This requires a very detailed knowledge of the PDF spec and tagging, and writing a plug-in in C/C++. And of course it requires that the tagging is correct. Since tagging is often added automatically, it is often useless for real structural info. Who thought it was a good idea to tag automatically...!

Possible to Route Traffic Based on AVC?

Is it possible to route traffic, based on the Application Visibility Control functions that specific Cisco routers are capable of? Here's my issue: I have two ISP's. One is at about 120% utilization. The other isn't doing anything. I can specify ip routes based on IP addresses. For instance, I can ip route 173.252.110.27 255.255.255.255 10.x.x.x to point to our ISP2 firewall, which is our non-utilized provider, for Facebook traffic. The problem is that sites like this have massive public subnets, so I won't be able to capture all of the traffic destined to Facebook. Is there a way to route traffic based on application? I know that Palo Alto firewalls have a way to do Policy Based Forwarding, based on application. I was wondering if the same was possible with AVC. Thanks for any help.

Hello.
Yes, it's possible and, actually, you have 2 ways.
1. use manual load-balanace between links.
2. use PfR to load-balance traffic automatically.
PS: you also will need NAT with route-map.

In SAP is it possible to identify duplicate BP master record?

hi,
In SAP is it possible to identify duplicate BP master record?
Regards,
babu

Hi,
You can identify the BP dupliate check. See the link
http://help.sap.com/saphelp_crm50/helpdata/en/9a/6f9a3d13ce0450e10000000a114084/frameset.htm
Regards
Srinu

In BD87 T /c is it possible to control user based in Comp code...?

In BD87 T /c is it possible to control user based in Comp code...?
Thanks
Mahi

BD87 is a transaction to work with IDOCs.
one IDOC e.g. for vendor master can have several segments with different company codes.
But you cannot post an IDOC only partially, that is technically not possible and does not make much sense.
Further the IDOC segment in the table is just one huge field, It does not have single fields like company code.It is a generic field that can keep the segments of any IDOC.
In my opinion there is no way to control it at company code level.
In any case you posted it in the wrong forum. BD87 is not a MM transaction.
Hence, moving it to the Abap Connectivity forum

Is it possible to have location based CDR and QoE in Lync 2013

Hi,
Is it possible to have location based recording for CDR and QoE on monitoring database?

Possible? Yes. But you'll want to write your own report for it as what's native likely won't help you much. Check out the user activity report, search for a user and drill into the detail on that call. That takes you to the Peer to
Peer Session Detail report for that call, if you expand Media Quality report, you can see the IPs on each end, the location as defined in Lync, the client types... You'll just need to compile it into your own report for better readability.
We do that as part of our Lync managed services offering, we have custom reports that outline call quality issues per subnet so you can see how the call quality of a particular branch or wifi VLAN compares to another.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is it possible to regroup data based on attribute value of a tag?

is it possible to regroup data based on attribute value of a tag?

Hi Rajeev,
You can filter records during import if one of the Matching field is of type Lookup.
In your case if you create City as flat lookup table in MDM & maintain lookup values in DM(Just as an example), then you can import only records where city is HYD.
Map Name & City, Then in Match Records tab select both the fields (Combination)
then right click on it & select Filter.. option.
Now new pop up will open where you be able to see ur Lookup table values, from there select HYD and Add
Now in default Import Action, set Create Action for None/None (All other will be skip)
This way you will import only HYD records.
But this is possible only on Lookup fields & not foe Text fields
Hope this will help you
Thanks & Regards,
Mahi

Filter Based on other report not working

Hi Gurus,
I am using OBIEE 10g.
I have a Dashboard page in that i have a prompt and 2 reports,(A, B reports). Report B is using the same columns as prompt where as report A not.
Report A has columns which hold the same data as report B, so i thougt to pass the values based on Report B column using the filter based on other report. I am able to complete it succssfuly but Report A is not having amount of data that i was excepting. When i started investigating i found out that the column which i am using in the prompt and report B have values ( NEW, OLD, NULL) report A able to take the values NEW and OLD but the NULL values are not passing to report A. In report B it is taking null value as it has filter as prompted.
Is it any way to have the values (NEW, OLD, NULL) in report A?
Thanks in Advance.
Regards
Ali

Hi Deep,
Thanks for taking time to answer my question.
I have to display null. If i Mask with something then i dont get proper data in report A, couse in the table it is null.
Thanks
Ali

Is it possible to control itunes dj from other computers on the same network?

is it possible to control itunes dj from other computers on the same network? we have a computer running itunes connected to our speakers here at work, and we'd like to be able to control it through the other comptuers on the network. is this possible, or do you have to use iphones/ipads/etc?

AC is corret you can do that. It might work a bit better for you if you use a wired connection vs a wireless one for the ATV's.

It possible to insert lines between 2 other lines in Grid

Hi
Is it possible to insert lines between 2 other lines in the Grid. Example, I need to enter a new item between line 1 and 2 in the grid. Similar to inserting lines on the sales documents.
Can any having any idea please share with me.
Regards
Senthil

Hi,
have a look at the DataColumns Collection
A collection of DataColumn objects. Use this collection to add columns to the collection or remove columns from the collection.
You can access the collection via the DataTable.Columns property.
you'll find it in the UI API Dokumentation.
i hope it helps you.
regards
David

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

PM Notification - Hide fields based on other field's value

Hello experts,
I am looking for an user exit which allows me to hide some fields based on other field's value.
For example, I have field 1 and field 2. When I open my notification, if the value of field 2 is 'aaa', field 1 has to be hidden.
There should be an user exit but I can't find it...
Thanks for your help!

Hi everyone,
Any thoughts? any help is appreciated...
Thanks

How to insert into date column based on other columns?

Hi
I have four columns in a table called game named as
R_Day - Type - Number
R_Month - Type - Number
R_Year - Type - Number
R_Date - Type - Date
I have around 1000 records and i want to fill R_Date column based on the data in the R_Day,R_Month,R_Year.
How to write a query to fill the R_Date column based on other three columns.
Thanks
srinivas

select
to_date(R_Day||'-'||R_Month||'-'||R_Year,'DD-MM-YYYY')
dt from (select 23 R_Day,07 R_Month,2007 R_Year from
dual);
Hi,
Update <Table Name> set R_Date=select
to_date(R_Day||'-'||R_Month||'-'||R_Year,'DD-MM-YYYY')
from <Table Name>
Regds.
Nirmal
SQL> select * from test;
     R_DAY    R_MONTH     R_YEAR R_DATE
         1          1       2007
        21         11       2007
SQL> update test
2 set r_date = select to_date(R_Day||'-'||R_Month||'-'||R_Year,'DD-MM-YYYY')
3 from test;
set r_date = select to_date(R_Day||'-'||R_Month||'-'||R_Year,'DD-MM-YYYY')
ERROR at line 2:
ORA-00936: missing expression
SQL> update test
2 set r_date = to_date(r_day||'-'||r_month||'-'||r_year,'dd-mm-yyyy');
2 rows updated.
SQL> select * from test;
     R_DAY    R_MONTH     R_YEAR R_DATE
         1          1       2007 01-JAN-07
        21         11       2007 21-NOV-07
NB:Please test before posting..

Automatically populate fields in jsp documents based on other fields

hello guys. I have a jsp document
that has the following
<af:inputText value="#{bindings.SourceDocumentId.inputValue}"
label="#{bindings.SourceDocumentId.label}"
required="#{bindings.SourceDocumentId.mandatory}"
columns="#{bindings.SourceDocumentId.displayWidth}"
binding="#{backing_transactions_editTransactions.docId}"
id="docId">
<af:validator binding="#{bindings.SourceDocumentId.validator}"/>
<f:convertNumber groupingUsed="false"
pattern="#{bindings.SourceDocumentId.format}"/>
</af:inputText>
<af:inputText value="#{bindings.DocumentName.inputValue}"
label="#{bindings.DocumentName.label}"
required="#{bindings.DocumentName.mandatory}"
columns="#{bindings.DocumentName.displayWidth}"
binding="#{backing_transactions_editTransactions.docName}"
id="docName">
<af:validator binding="#{bindings.DocumentName.validator}"/>
</af:inputText>
And I have created the generated the backing beans automatically.
public class EditTransactions {
private CoreInputText docId;
private CoreInputText docName;
public CoreInputText getDocId() {
return docId;
public void setDocName(CoreInputText inputText7) {
this.docName = inputText7;
public CoreInputText getDocName() {
return docName;
I have a method in appmodule that has this
public String getDocName(Number docId)
{String docName;
return docName
on the document Id field I have to input a certain docId after I input the docId I have to populate automatically the docName based on the doc Id being given.
question
1. how can I set the document name automatically w/out submitting the page ?
2. how can I use my backing bean to set the docName using the method in my AppModule.?
Can anyone help me regarding this one.
Thank in advance
alvin.

A: automatically populate fields in jsp documents based on other fields

here is what you need to do:
1. Change the definitions for your fields as following
<af:inputText value="#{bindings.SourceDocumentId.inputValue}"
                        label="#{bindings.SourceDocumentId.label}"
                        required="#{bindings.SourceDocumentId.mandatory}"
                        columns="#{bindings.SourceDocumentId.displayWidth}"
                        binding="#{backing_transactions_editTransactions.docId}"
                        id="docId" valueChangeListener="#{backing_transactions_editTransactions.docIdChange}"
autoSubmit="true">
            <af:validator binding="#{bindings.SourceDocumentId.validator}"/>
            <f:convertNumber groupingUsed="false"
                             pattern="#{bindings.SourceDocumentId.format}"/>
          </af:inputText>
          <af:inputText value="#{bindings.DocumentName.inputValue}"
                        label="#{bindings.DocumentName.label}"
                        required="#{bindings.DocumentName.mandatory}"
                        columns="#{bindings.DocumentName.displayWidth}"
                        binding="#{backing_transactions_editTransactions.docName}"
                        id="docName"
partialTriggers="docId">
            <af:validator binding="#{bindings.DocumentName.validator}"/>
          </af:inputText>2. add the followig method to your backing bean:
public void docIdChange(ValueChangeEvent valueChangeEvent) {
    getDocName().setValue((String)getDocId().getValue() + "suffix");
}Run your form and enter the value into docId field, then press tab to go to the next field - docName will be populated

Possible to identify workbooks based on other workbooks?

Similar Messages

Maybe you are looking for