Possible to install 10G on Suse?

I have installed oracle 10G on red hat linux. I was wondering if it was possible to install it on another distro, such as Suse linux.
Has anyone done this successfully? I have an installed distro of Suse linux that I am trying to repair, I'm wondering if it would be worth it. It certainly would be much cheaper than getting Redhat.

It wasn't supported but that's changed. See Certify on Metalink:
Operating System: Linux x86 Version SLES-10
Oracle Database - Enterprise Edition Version 10gR2
N/A Version N/A
Status: Certified

Similar Messages

INstalling 10G on Suse 9.1

Please help!
I'm trying to install oracle 10G on Suse 9.1.
The Oracle installation guide mentioned the sysctl.config file that must to receive a several Kernel parameters to prepare the environmental. But this file just exist on Red Hat, not in Suse distro..
Could someone tell me on the sister file on Suse I need to do the entries?
Thanks in advance.
Eduardo

1) Setting the environment:
ftp://ftp.suse.com/pub/suse/i386/supplementary/commercial/Oracle/orarun-1.8-11_SL80_81.noarch.rpm
2) Installed patch p3006854_10102_LINUX.zip from metalink
3) run the installer and ignore errors ora-27125 during dbca
runInstaller -ignoreSysPrereqs
4) run below command:
cd $ORACLE_HOME/bin
mv oracle oracle.bin
cat >oracle <<"EOF"
#!/bin/bash
export DISABLE_HUGETLBFS=1
exec $ORACLE_HOME/bin/oracle.bin $@
EOF
chmod +x oracle
6) run dbca to create the database.

Problems installing 10g on Suse Linux (Failed dependencies: libaio)

I am having problems installing Oracle 10g on a Suse Linux Operating system. I get the following error message.
# rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm
error: Failed dependencies:
libaio >= 0.3.96 is needed by oracle-xe-10.2.0.1-0.1
Can anyone help me with this?
Message was edited by:
user473930

Please also read the install documentation. This has been noted as a requirement for oracle-xe (you need one more lib ;) ) This also helps you setup your DB, etc, etc.

Installing 10g on Suse 10 - Orarun

Hi all,
Actually I've installed some databases with a procedure that I found in the Novell page, it makes simple the installation of Oracle without have to mess with some parameters.
After setting up Oracle Server Base at install, just have to enable oracle user.
Then change the ORACLE_HOME and ORACLE_SID in /etc/profile.d/oracle.sh
After this just have to run the script /usr/sbin/rcoracle start this set the kernell parameters
Then just run the ora installer
Is a quick method but I was thinking if it's the best
What do you think ?

Hans Forbrich wrote:
Archylus wrote:
What do you think ?With Novell's certified Oracle configuration we have orarun.
With Oracle's certified Oracle configuration we have 'oracle-validated.rpm'
For the rest of the Linux world, if you can find it you can use Howards 'doris' script.
All make a huge number of assumptions about how you want to configure your system. For all of them, the assumptions are usually satisfactory to get started.Thanks, well I'm a Jr. DBA (just starting), but we dont have another dba with more expertise ( He left to another place) then after making some installs this come to my head. I want to make the things in the best way that I can.
The databases are important. And we want to run smoothly as possible.
>
Once things are started for a test configuration (a 'does it work' database), a professional DBA will review the configuration and make changes according to load and policy.
Tkx, Then is time to research a little more.
What get me a little confused was this from the manual
Note:
The kernel parameter and shell limit values shown in the following section are recommended values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. Refer to your operating system documentation for more information about tuning kernel parameters.The same feeling that I got when we get a server with 32gb of ram and asked to Oracle support which will be the right swap, and they respond me that for what we have too much ram.
So yes - orarun is perfectly good ... to start. (And likely not valid for 11gR2! Just as oracle-validated.rpm with OEL 5u2 is not.)
Edited by: Hans Forbrich on Apr 17, 2010 7:38 PM
I have to admit I have not looked at 'doris' in a while. It's assumption matrix may be a lot better and/or a lot more flexible than the others, however I have no idea how it stands up now.Thank you again

10g on SUSE 10. Can I install?

Hi there,
I am trying to install oracle 10g (10.2.0.1) on SUSE 10 SP1 Enterprise. When I tried to run the runinstaller, I got error message saying that it has to be SUSE 9.
Does anybody know if I can put 10g on SUSE 10? if so, how to get around the "check operating system" error? thanks.

The OUI for 10.2.0.x is not up to date for SUSE 10, so you have to bypass OS checks. Execute the installer as
$ ./runInstaller -ignoreSysPrereqs

Is possible to install Application server 7 on SuSE linux 9.0

is possible to install Application server 7 on SuSE linux 9.0

Actually, this might not be the case since version 7 is based on native implementation of web container while version 8 is based on Tomcat (i.e. pure Java implementation). So, version 7 will definitely be more prone to platform specific issues.
Just something to have in mind...

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.

I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
But this massage pop up when I used my browser first time before start database.
Actually when I clicks on yes to start database.
The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
* Microsoft Internet Explorer version 5.5, 6.0 or higher
* Netscape Navigator version 7 and higher
*Mozilla version 1.3.1 and higher
Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
Regards,
D

You can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
IE for linux does not exist.

Oracle 10g on SuSE 9 with kernel 2.6.4

Hi,
i have installed Oracle 10g on SuSE 9 Professional with kernel 2.4.21-192 and it works fine.
For testing purposes i have installed a 2.6.4 Kernel and get the following error on database startup:
SQL> Connected to an idle instance
SQL> ORA-27125: unable to create shared memory segment
Linux Error: 1: Operation not permitted
SQL> Disconnected
Do you have any hints or is the kernel 2.6 not supported.
Thanks Klaus

/* using strace I have narrowed this down to the shmget call for allocating SGA memory. Specifically 2.6 kernel generates a WAIT in this call and Oracle specify IPC_NOWAIT flag, hence the failure condition.*/
#include <sys/types.h>
#include <sys/shm.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <errno.h>
extern int errno;
#define SHM_HUGETLB 04000
#define SGA_SIZE 192937984
#define dprintf(x) printf(x)
#define ADDR 3285588844UL
main()
int shmid;
int i, j, k;
volatile char *shmaddr;
if ((shmid = shmget(ADDR, SGA_SIZE, IPC_CREAT|IPC_NOWAIT|IPC_EXCL|0660) )
< 0) {
perror("IPC_NOWAIT Failure:\nTry without NOWAIT condition");
if ((shmid = shmget(ADDR, SGA_SIZE, IPC_CREAT|IPC_EXCL|0660) )
< 0) {
perror("Failure:");
exit(1);
printf("shmid: 0x%x\n", shmid);
shmaddr = shmat(shmid, (void *)ADDR, SHM_RND) ;
if (errno != 0) {
perror("Shared Memory Attach Failure:");
exit(2);
printf("shmaddr: %p\n", shmaddr);
dprintf("Starting the writes:\n");
for (i=0;i<SGA_SIZE;i++) {
shmaddr[i] = (char) (i);
if (!(i%(1024*1024))) dprintf(".");
dprintf("\n");
dprintf("Starting the Check...");
for (i=0; i<SGA_SIZE;i++)
if (shmaddr[i] != (char)i)
printf("\nIndex %d mismatched.");
dprintf("Done.\n");
if (shmdt((const void *)shmaddr) != 0) {
perror("Detached Failure:");
exit (3);

10g on SuSE 9.1 Pro issue

Hi everybody!
I am a newbie in this area (Oracle & Linux) and I need some help here...
I have succesfuly installed Oracle 10g on SuSE 9.1 Pro (kernel 2.6.4), following the step by step procedures as described by Oracle (oracle user account, dba and oinstall groups, kernel parameters, shell limits, environment variables for the oracle account...) BUT...after rebooting, any connection to the host, nomatter what port(5500,5560 etc), is refused...WHY?...There are no changes in the network configuration, the firewall service is off...
Could somebody give me an advice?
Thanks!

emctl start dbconsole
isqlplusctl start

Oracle 10g on suse 9.1 Professional

I recently moved to Linux suse 9.1 from the Windows background and I need to install Oracle 10g Database on Suse. I'll be glad to get a step by step instruction on installing oracle10g on suse Linux 9.1

On following the installation guide, I got these errors on trying to log in to SQLPLUS
SQL> startup
ORA-01078:Failure in processing system parameters
LRM-00109:Could not open parameter file '/u01/app/oracle/product/10.1.0/db_1/dbs/initsalesora'
I was only able to make an idle connection and on running any script (even on dual table) I got the following errors:
ORA-01034:Oracle not available

Is it possible to install 32 bit oracle db on a 64 bit linux server?

Is it possible to install 32 bit oracle 10g db on a 64 bit linux server rhel 4.
thanks in advance,
chau

Yes, it is possible, but you can perfectly install the 64 bits version on RHEL4. However you will have more trouble on unsupported OS... so it's useful that you can install the 32 bits version.

Is it possible to install SharePoint 2013 and SQL 2012 on single Azure Virtual Machine

I had a Azure subscription, I need had created only one Virtual Machine, is it possible to install SharePoint 2013 and SQL Server 2012 on that single virtual machine in azure.
I had SharePoint 2013 and SQL Server 2012 licence from MSDN subscription,
Finally on Azure virtual machine is it possible to Install SharePoint 2013 and SQL server by downloading these software from MSDN.

Hi,
It is supported to install sharepoint 2013 and SQL server on the same server. However, please check the size of your Azure VM and make sure it is compatible for that.
The minimum recommended size for a virtual machine is A3 when using SQL Server Enterprise Edition. Select A3 or higher when using SQL Server Enterprise Edition. Select A4 when using SQL Server 2012 or 2014 Enterprise Optimized for Transactional Workloads
images. Select A7 when using SQL Server 2012 or 2014 Enterprise Optimized for Data Warehousing Workloads images. In addition, the default size for SharePoint 2013 image is A3.
In addition, as a best practice, you can install them in different servers and then deploy SharePoint 2013 with SQL Server AlwaysOn Availability Groups in Azure:
Deploying SharePoint 2013 with SQL Server AlwaysOn Availability Groups in Azure
http://msdn.microsoft.com/en-us/library/azure/dn275959.aspx
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Installing 10g grid on windows server 2003.

Can you install Oracle 10g GRID R3 on windows 2003 server...
As documentation says
Microsoft Windows (32-bit)
is certified with windows 2000
http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm#CHDBGHFE
Is it possible to install on windows 2003.

Yes it is possible and it is certified.
Always use "Oracle Enterprise Manager 10g Grid Control Certification Checker" to find the latest certification info.
Metalink Note:412431.1

Possible to install 10G on Suse?

Similar Messages

Maybe you are looking for