Possible to install just the drivers and no iTunes?

I'm sure this has been asked before - and I'm sure someone would've pointed that out and told me to use Search - but I did that and all my searches about drivers brought back thousands of hits and I went through a few dozen pages but I'd die of old age before I found what I need. I just wanted to get that out of the way...
My workplace does not allow me to install iTunes on my business laptop (WinXP) for security reasons. I don't care about that, but I'd like to be able to charge my iPhone via USB. Is it possible to obtain whatever drivers I would need to do only that, without iTunes installed?

your phone will charge in just about any usb port. The only reason to have itunes of course is to back up and restore your phone if needed.
I can actually charge my phone in my Wii usb port.
You don't need to install anything just to charge your phone.
Message was edited by: Dynamite DJs

Similar Messages

  • Is it possible to join both the us and uk itunes store?

    is it possible to join up in both the us and uk?

    You can ONLY use the itunes store of your country of residence ( proven by the valid billing address on your credit card) AND ONLY while you are inside the borders of that country.

  • Labview 2010 SP1 - How to install just the labVIEW and remote panel

    Hi all
    I am currently using a licensed version of LabVIEW 2010 SP1. It came up with 6 to 7 DVD’s each of them containing around 5 GB of data. Installing all these stuffs eats up around 30 GB of ma C drive.
    My project just deals with 2 EPOS controllers controlling 2 of maxon EC motors and these 2 EPOS controllers are communicating via USB port with the client PC. This client PC have to be monitored and controlled remotely by host PC containing the same LabVIEW version.
    To do this, do I have to install all of these 7 DVD’s or just enough to download the “LabVIEW for education 2010 SP1” from the NI website, available in the below link “http://search.ni.com/nisearch/app/main/p/ap/tech/lang/en/pg/1/sn/n8:28,ssnavdl/”
    Awaiting for your reply  friends.
    Thanks in advance

    Duplicate Post

  • Is it possible to install JUST the iDVD application from my OSX disc?

    hi folks,
    I was recently doing some work with iMovie and wanted to transfer it to iDVD for burning but when I did a message appeared saying that I needed iDVD 3. This surprised me as I am running OS 10.2.8 and should have been installed when I did an installation upgrade two years ago. I am wondering the best way to go about getting iDVD 3 installed from my OSX v 10.2 cd without having to do a clean install.
    Any help would be appreciated.
    Thanks,
    MNcyclist

    Hi mncyclist:
    Unless I am misunderstanding you, I believe you are mistaken.
    iDVD (nor any of the iLife 4 features) came with OSX.
    I believe the reason you don't have iDVD on your mac is because you never had it in the first place unless you purchased iLife 04.
    Sorry about that!
    Sue
    iMac PPC G5 20, iMac 17 Flat Panel G4   Mac OS X (10.3.9)   1 G RAM all around

  • Just installed the update and now iTunes wont open! Help!!!

    Just installed the update and now iTunes wont open! Help!!!

    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

    As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
    P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

    You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
    I think the following may help me (In case anyone els is looking):
    http://support.apple.com/kb/DL830

  • HT4407 my MBA is running windows 7 Home, 64 bit but windows is not seeing key hardware, i.e. network&sound. I followed the Apple directions "Installing Windows 7 drivers" and still no joy. Any help would be appreciated.

    My MacBookAir is successfully running Windows 7 Home, 64 bit but Windows is not seeing key hardware i.e. network,sound and
    camera. I have followed the Apple directions "installing Windows 7 drivers" and Windows is still not seeing hardware. Any Help would
    be greatly appreciated.

    Yes, I had MBA burn Apple's Window support software to a DVD. In Windows I am getting "Hardware not found" and during another attempt (using windows's update driver) "driver not found".

  • If I set up separate 2.4 and 5GHz networks on my Airport Extreme base station, is it possible to extend just the 5HGz network?

    If I set up separate 2.4 and 5GHz networks on my new Airport Extreme base station, is it possible to extend just the 5HGz network with another AirPorrt Extreme that has duel, but not simultanous, frequencies?

    Yes, configure the "extending" AirPort Extreme to connect to the 5 GHz network name when you set it up.
    Temporarily, locate the extending AirPort Extreme close to the main Extreme for the setup, then move it to the remote location.
    But, be advised that it is not easy to extend 5 GHz using wireless. You will almost need to have line-of-sight between the two AirPorts for this to work.

  • IMac mid 2007, 2.4 Ghz, 800 MHz... Grey screen only, running OS 10.5.8.  Tried reinstalling, restoring, and resetting but to no avail.  Possible to install OS 10.6 and get it to boot?

    Try to boot and only getGrey screen, sometimes with the globe f
    Asking, sometimes not. 
    I am running OS 10.5.8.  Tried reinstalling, restoring, and resetting both with installation disc and without, but to no avail. 
    I recently upgraded from 1GB memory to 4 GB.  It ran great for a couple of weeks, when I eventually powered it off, it would not come back.  With installation disc, I did get to the utilities and tried repair and even reinstall original OS (several updates down from 10.5.8).  At one point, I was able to restore a previous session, but it only lasted for about 3 days until I powered it off again, then back to square 1.  I have verified the Macintosh HD disc and repaired it, I have reset everything I can find that might need resetting... Still nothing.
    SO, is it toast, or is it possible to install OS 10.6 and get it to boot?

    Erase the drive then install OS X:
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    If this doesn't work then the drive is probably bad or some of the new RAM you installed is marginally defective.

  • Is there a way to install just the 32 bit version of Photoshop CS5 on a Windows 7 64 bit machine?

    I have a custom built Java 6 application that doesn't like Photoshop CS5 64 bit edition.  The program copies over a file from the network to the local machine and then opens it in Photoshop.  The user manipulates the image and saves the changes.  The user then completes the image and the application copies the image back to the server.  The problem we're having is: When we use Photoshop CS5 64-bit, it takes about 2 minutes for Photoshop to open the image.  The file is copied over within 2 seconds and the Photoshop icon on the windows taskbar starts flashing.  But then you spend a few minutes waiting for it to open.
    Some things that I have tried to isolate the problem:
    - I found you can copy the file somewhere else, double click on it and the image will open in Photoshop before the script is able to open the file.
    - I tried uninstalling Photoshop and reinstalling just the 64 bit edition without the 32 bit installation.  The script just stops working in this situation.
    - I tried uninstalling CS5 and installing CS3.  The image opens as soon as the file is copied over.
    What I would like to try next is to install just the CS5 32 bit version.  But the installer is being uncooperative and will only allow either the 64 bit version or both the 64 and 32 bit versions.  So, back to my question: Is there a way to install just the 32 bit version of Photoshop CS5 on a Windows 7 64 bit machine?

    Do you mean schroot?  If so I'm not sure exactly how well that will work out, because the part that depends on python is a deamon that handles communication between the USB dongle and the Tux Droid which may mean hacking the deamon a bit so ether way this does not seem like it will be a easy task.

  • Looking to run windows on my MBPro through Bootcamp or Parallels, but would like to use a downloaded Windows 7, is it possible to install without the Windows Disc?

    Looking to run windows on my MBPro through Bootcamp or Parallels, but would like to use a downloaded Windows 7, is it possible to install without the Windows Disc?
    Need to set up a workstation on my MBPro that will only run on Windows. Im willing to use Bootcamp or Parallels to see what works best. Need to get this set up this week to enable working from home on my MB - rural and hoping to buy Windows 7 online - am I able to get windows working through either bootcamp or Parallels without the actual Windows disc? Bootcamp set up guide calls for a disc.

    Welcome to Apple Support Communities
    First, the answer to your question is yes, it IS possible to install Windows in Parallels without a disc, using an .iso image file.
    Boot Camp since OS X 10.8 also installs Windows without a disc: https://discussions.apple.com/thread/4889551?tstart=0
    Parallels has complete documentation, series of forums, and a knowledgebase. You can also download the current release of Parallels 9 and try it for free for a few weeks before you decide to purchase it.
    The Parallels Desktop for Mac product page: http://www.parallels.com/products/desktop/
    The Desktop for Mac forums: http://forum.parallels.com/forumdisplay.php?58-Parallels-Desktop-for-Mac
    Documentation: http://www.parallels.com/support/desktop-virtualization/desktop/#c12970
    The Knowledgebase for Desktop for Mac: http://kb.parallels.com
    The primary difference between a Boot Camp installation and a Parallels installation is that in the Boot Camp installation, you're installing Windows into a separate partition on your internal mass storage device (hard drive or SSD) and then rebooting your Mac directly into Windows.
    In Parallels, you're always running OS X on the Mac and Parallels is running a Windows virtual machine.
    Not to get too technical here, but it is also possible for Parallels to run an installed Windows Boot Camp partition as a virtual machine. If you're evaluating system performance with a trial copy, that might be the way to go, because you only have to install Windows once on Boot Camp as a dual-boot system, then install Parallels Desktop and run the Boot Camp partition as the virtual machine.
    There is a performance difference between the two, with the Boot Camp Windows installation being faster, but without the convenience of running both Mac and Windows applications simultaneously offered by Parallels. Sometimes that convenience outweighs a performance hit.
    I can't give you more Mavericks and Parallels 9 specifics, because I'm currently running Windows 7 with Parallels 7 on OS X 10.8.5. Parallels 7 will not run on OS X 10.9 Mavericks.
    I've been using Parallels (to run a few old rarely-used WIndows applications with features that would require a steep learning curve and major expense to purchase and learn a similar Mac app) occasionally since Parallels 3 and Windows XP. With each new release of OS X, each new release of Parallels, and each new Windows release, there are ALWAYS 'early adopter' bugs that get worked out over time.
    Message was edited by: kostby

  • Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE.

    Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly

    Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

  • How to install just the Adobe 7 Writer PDF printer

    In our environment we need to be able to print to PDF, but we also have a 3rd party formcreation software that needs Adobe 8 reader to capture digitized signagtures.
    After testing we have found out that we need to have the PDF printer functionality of Writer 7, and the digitized signature capture ability from 8.  Problem is that the 7 install (no matter ther order of installation) take priority over the 8 install and does not let us use 8 to sign the document.
    the ideal fix is being able to install just the pdf printer from 7 Writer.
    Network is a mixed batch of XP and 7 machines

    Artisan Bytes wrote:
    Has the ability to download only the 64-bit version of the CC apps been inclided in the current release?
    Nope, still using users HD space and bandwidth. The official June 17th release is still downloading and installing both 32-bit & 64-bit.
    Double copies of CC apps installed - Why, and how to delete?
    http://forums.adobe.com/message/5435919

  • Is it possible to change just the ram on the motherboard (G5) or do you have to change the motherboard?

    Is it possible to change just the ram on the motherboard (G5) or do you have to change the whole motherboard?

    I do understand that... but this is the problem - The computer freezes when it is put to sleep (and sometimes more frequently). Apple told me that it could be three things: ram, hard drive or the motherboard. - take the ram out and then put the computer to sleep, if it still freezes than it is one of the other two and not the ram. They told me that there is ram on the motherboard. So I tried that and the computer wouldn't even boot up. So I thought the problem is the motherboard and possibly the ram on the motherboard. I really have no idea what I am doing, I just don't want to have to throw a $3,500 (when new) computer away.
    Thanks!

  • Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

    Hi
    Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
    Thanks
    Bye
    balubeto

    Hi @balubeto 
    I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
    Software and Driver Removal Utility
    Uninstalling the Printer Software (more basic uninstall)
    I hope this resolves your inquiry.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • How Do I Find the Full URL for Linking to Messages in the Forum

    What is the best way to find the URL that links directly to a message I've posted in the forum? When I receive an e-mail notifying me that a reply has been posted in a thread I'm subscribe to, there is a link to that reply in a format similar to http

  • IPod touch 5th generation does not recharge

    My new iPod touch 5th generation, using iOS 6.0.1, is just over 1 month old and today it will not recharge anymore. When I plug teh iPod into an outlet to recharge it no longer makes the "connection" sound and the battery icon does not change to the

  • DataGrid with Custom Component not showing sub-components

    I'm hoping someone can enlighten me on this issue. I have a datagrid with one column which has an item renderer. It doesn't matter if the "text" data comes from a dataProvider or is static. If I do the following, only the first label will show up. <m

  • Mapping of status CRTD,AALK with Technical names

    Hi all, We have Client requirment in which we are preparing Customized program which will download Budget data for a particular Project. After executing this customized z transaction, we are giving following inputs. Proj Def. WBS Element Version Scop

  • Error when saving the RFQ

    HI all, Iam creating a standard RFQ manually through purchasing>RFQ's and quotations>RFQ. But when iam saving the RFQ, iam getting an error like, Please enter the required value for the Purchaser's Phone Number segment in the PO Headers flexfield. Pl