Possible to make Phone Vibrate twice in a row for a text

I been wondering lately if there is a way to make your Iphone vibrate twice for a text. I know after a few mins it will vibrate again but a lot of the time i never even feel it cause the Iphone vibrate is so weak compared to most phones. So from what i know you can not do this, but maybe in the future they could provide this option. Would be a great little upgrade that would matter a lot to me and possibly to many other people. Cause i know that if im wearing jeans or moving around chances are i wont feel it unless i have sound turned on and i cant always have that.

You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Similar Messages

IOS 4 - Why does my phone vibrate twice when I receive a new email?

My email is set up as an exchange server for gmail. Whenever I receive a new email, it vibrates. I go to check the email, and it marks it as read. All is good, but then 15 minutes later, my phone vibrates again and makes the new email noise, even though there is no new email. Any ideas?
I have an iPhone 4

Settings > Sounds > Text Tone > Vibration > choose what you like.
I see you're new here. Here's a link to the iPhone User Guide.
Good day.

How do I make phone vibrate longer for a text message?

I have an iphone 4s and I am wondering how I can set the vibrate longer for a text message. I have it turned on. I have set the vibrate to "Rapid".
I vibrates long for a phone call, but I want it to vibrate longer than a short burst, which is repeated later, on a text message.
Can anyone help?

You can't.

Is it Possible to make a Tuesday as a due day for payment. in terms of payment obb8

Hi Gurus
I need to make terms of payment 28 days from the base line date of posting date. and payment should made on every Tuesday once the invoice is due after 28th day.
Is it possible to make Tuesday is the base for Payment. instead of Date e.g instead of 2nd payment i need to make payment on every Tuesday.
Thanks in advance
Ravi

Hi Ravi
In SD and MM you can do it with BADI or enhancements. Please, see these notes:
Note 1156325 - BAdIs in the Logistics Invoice Verification environment
Note 301077 - User exits for the interface to accounting
For invoices in FI (FB60/FB70 and so on), maybe with the BTE 00001610
I hope this helps you
Regards
Eduardo

My phone is stuck in a loop for recieving texts!

Can anyone help me? my phone seems tobe stuck in a loop for recieving texts. i keep recieving the same texts from 411. it started yesterday when i had 411 send me a text with the number i was looking for. now i can't recieve any texts except from 411. i can send texts and make calls but i can't recieve any others.

Hi LizzieBr33,
I feel your pain; I use my text messaging featuring constantly and can relate to the importance of being able to receive text messages. I trust that rebooting your phone has resolved the issue by now as it was recommended by other forum members (thank you all!). If you still have this messaging issue please post back with answers to the following questions and we all be able to assist you further.
What 411 service are you getting these text messages from (Several services available)?
Did you subscribe to a specific service to receive messages from these 411 messages?
Are you using a third party application to send/receive text messages?
Additionally, a Factory Reset will most likely resolve the issues if a 3rd party application or system file is corrupted.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/vzwsupport

How to make phone vibrate when call is answered?

Hi!
Does anybody know how to make a BB phone (Bold 9700) to have a short vibrate when your call is being answered, so that you don't have to look at the phone or hold it to your ear when making a call?
Appreciate any advice, thks!

Hello Daven02,
You might want to try using a bluetooth headset as there is no way to enable a vibration when a call is connected.
You can find a variety of supported headsets at the Shop BlackBerry website.
Thanks and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to make phone vibrate on ring, not messages?

Hi,
Im trying to set up my phone so that it only vibrates when an incoming call comes through, for all other things (messages, notifications etc) I want it to be on silent.
Can't seem to figure out how to set this up, any ideas?
Cheers
Andrew

Hello Daven02,
You might want to try using a bluetooth headset as there is no way to enable a vibration when a call is connected.
You can find a variety of supported headsets at the Shop BlackBerry website.
Thanks and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Is it possible to make a ocr application in xcode 5 for ios 7?

If so where do i go? What do i do? Are there any downloadable projects for xcode 5 ios 7? Thanks

I want ocr in my latest project. Im a begginer so if you could help me with how to install/open an openocr source i would apreaciate that alot

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How to make single column scrollable in ALV report (for long Text)

I have a 20 columns which we need to display in ALV grid, including one column for long text. In long text column currently it showing 40 character. I tried to change output length of field catalog but it's not working.
Can any one help me ....
Thanks
Guru
Message was edited by:
gurusharan mandal

hi,
pls remeove if u give like this in the layout.
gd_layout-colwidth_optimize = 'X'.
rgds
Anver

Why does my phone have to vibrate twice when I plug in the charger

I have had an iphone 5 for about a year now and I am very disappointed with Apple and will be changing to a different phone as soon as I can. The fact that apple makes the phone vibrate twice when I plug in a third party charger is obsurd. The apple charger is much worse and breaks sooner than the thrid party charger, but since apple want to make money they are forcing a notification that says this charger may not work properly (actually works better than apples charger) and causes the double vibrate.
They also failed in reconizing a computer, as I have to verify that I trust my home computer everytime I plug it in, also causing a double vibrate. It can't remeber that it has been plugged into this computer many times?
Very disapointed in apples ability to live up to the high end cost of their devices and I will definetly be switching to a different device (which has also made me decide to not buy other apple products)
It would be nice if they would address this problem as it affects every iphone and is a huge negative to ergonomics and functionality of the product.

Update to the latest drivers:
http://support.apple.com/kb/DL907

Is there any way to make phone calls from an iPhone 3GS trough my Macbook Air?

Hello.
I would like to know if it is possible to make phone calls from my iPhone 3GS through my Macbook Air.
I can do it with my iPhone 6, but my the 3GS is my work phone and it would be great if i clould do it with this one too.
Thanks!

I can make PHONE CALLS from my iPhone 6 on my MacBook???
(And then, I assume, my iPad?)

Make phone calls from my computer!

I thought I had already made this thread by I guess something went wrong!
So, is it by any chance possible to make phone calls using my iBooks Mic and Spkrs through my Nokia 7610 connected either with bluetooth or with the USB cable? I only found in the address book a button that makes the phone call but uses the telephone! Like making a call through the telephone line..
Is it?

Your car BT device has to support the Bluetooth Phone Book Access Profile (PBAP) to sync contacts from your iPhone. Check with the manual for that device.

Is it possible to make an iCloud account used by everyone in my school?

In my school we have iPads. Would it be possible to make an iCloud account used by everyone for contacts and calendars?

You do not give everyone the username and password of that account. This would be a violation of iCloud terms and conditions.
I've done what you want done with a calendar. You use the iCloud account yourself, then use the 'broadcast' facility to produce a subscription URL that everyone can put into their calendar software. If you make the calendar public anyone can subscribe. They don't even have to know the account name let alone the password.
Log into the account on www.icloud.com and test it out.
Once you have that working you might try the same thing with a contact list. I see no reason it shouldn't work.

Everytime my phone vibrates it makes this loud noise from inside that sounds like a weird cracking noise or something help!!

Okay so I noticed a week or two ago that there was something lose on the inside of my iPhone 5s and ever since then when my phone vibrates sometimes there is this weird noise. It sounds almost like a cracking noise from the inside or a weird electrical noise. I think something is wrong with the vibrating part. Does anyone know if this is fixable or what it is?

Hello ashliz17,
After reviewing your post, it sounds like the phone makes a cracking noise when it vibrates. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iPhone Other Repair Options - Apple Support
Apple - Support - Service Answer Center
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Possible to make Phone Vibrate twice in a row for a text

Similar Messages

Maybe you are looking for