Possible to manage the MobileMe galleries made by iPhoto using Aperture3?

I am considering moving my whole library from iPhoto to Aperture.
I understand that I can import the whole iPhoto library, but is it also possible to manage the existing MobileMe galleries made by iPhoto using Aperture3, without changing the current URLs of the gallery?
Thanks.

I'd like some info on this also.
Currently I have iphoto publishing photos to Facebook, Mobileme and Flickr. I have imported my iphoto library but none of these folders have imported. Is there a clever way of transferring these over to Aperture (3) such that my mobilem is unaffected as is my Flickr and facebook.
Aperture 3 already see's my mobileme and I posted a new album to mobileme from Aperture wondering if that would force it to download the other albums on there already but it didn't. You would think there is a way to do this. Otherwise if I have to delete the links in iphoto to facebook and then repost them from Aperture they will show as completely new uploaded photos when a lot of them are years old and at a guess it will re-tag all my contacts who will all think there are new photos of them.
Likewise will all my flickr comments be lost in the above process and will I effectively be starting from scratch again?
Any thoughts, ideas, help and guidance would be very much appreciated. I'd like to get away from using both iphoto and Aperture to just using Aperture 3 now it has all the additional functionality of faces that I like to use.
Thanks

Similar Messages

I shared my itunes account with my daughter for many years while she had only an ipod. She now has her own iphone with her own itunes account. Is it possible to transfer the purchases she made on my account over to her new itunes account?

I shared my itunes account with my daughter for many years while she had only an ipod. She now has her own iphone with her own itunes account. Is it possible to transfer the purchases she made on my account over to her new itunes account?

No. Purchase always remain with the account they were purchased with.

HT4814 Is it possible to manage the mac mini server with server app before set up?

The article says using the server app I need to enter the IP address, then the Administrator name and password, but obviously on the first boot these are not configured yet. The article does not mention if this is possible or the server.app can only manage the server after its initial configuration using a monitor connected.

From dim memory... Load Server.app on the client box or use Server.app on some other handy server, and either configure DHCP with the server's MAC address (usually listed on the shipping box) and your intended static IP address and then boot the new target server box, or just boot the new target server box and use Bonjour Browser or the command-line dns-sd tool to find the IP address that the new server box has acquired from DHCP, and then in either case, connect to the new target server via Connect To Server in Server.app via its IP address, specify the root user and use the system serial number (again, usually listed on the shipping box) as the password.

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

SF300 series is targeted for support in PI 2.0.

I have an iphone 3gs, i bought it with the carrier Orange in Mauritius and i would like to know if it is possible to unlock the iphone so that i can use another carrier.

i have an iphone 3gs, i bought it with the carrier Orange in Mauritius and i would like to know if it is possible to unlock the iphone so that i can use another carrier. thanks

Only the carrier can authorise unlocking. You need to contact them.

Is it possible to extract the contents of any PDF file using Adobe PDF SDK?

Is it possible to extract the contents of any PDF file using Adobe PDF SDK?
For Example: There is one pdf file. Let us say xxx.pdf with 32 pages. I am interested in only in a topic present at 10th page. Can I extract this information and save it into another pdf file (means new pdf file)?

Thanks Irosenth,
I am actually interested in extract the page and create a new PDF with that page. But still there is a catch that on which basis the page needs to extract either on PAGE number OR on Bookmark basis.
But here in this scenario assume I am looking for the PDF file, now I want to save only page 5. How can I extract page 5 automatically/programmatuically? Or in simple word how can I get the reference link of page 5?
Here I am not getting clear picture that Do I need both SDK Adobe & Acrobat to achieve this requirement. And more over you have mentioned that SDK itself is free. But on Adobe side it is mentioned that it is available by license only with this I have another doubt: To work my desktop/system application with Adobe PDF library, this library needs to distribute with the application. So in this case will it be chargeable for each and every deployment.
Could you please provide me the link from where I can download the SDK? So that I can do some excerise with SDK to figure out the exact flow of functionality to work with my application.

I don't want to buy a calender I want to print the one I made on iPhoto with my own picture pages.

I don't want to buy a calender I want to print the one I made on iPhoto with my own picture pages. There is also a problem with the cover page. Ihe title will not present the same in the source column as is on the larger picture, and It won't let me change it.
Virginia

Do NOT buy the book
Preview the calendar exactly the same way you preview the book
Preview the calendar the same as a book -
or with really minor edits
Preview the calendar using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF and print it
LN

Is it possible to manage the servers with RSAT in a different domain?

Hi All,
In our infrastructure, all the servers are in the domain A. But as per the organization policy, laptops are only allowed to join domain B, not allowed to join domain A. Is there a way to manage the domain A services (DC/DNS/DHCP/etc) with RSAT on laptops?
As of now I'm only able to use RDP to log on every server in domain A every time.
P.S. As of now most of the servers are Windows Server 2008 R2, and most of the workstations are Windows 7. There will be some new servers with Windows Server 2012 and Windows Server 2012 R2 OS in the future.
Thanks,
高麻雀

Hi,
As far as I know, we could only manage a remote server using RSAT in the same domain.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Is it possible to manage the "letter drive" on PC

Hi,
Is there any preference somewhere to help Adobe Drive using always the same drive letter?
By default, it looks like AdobeDrive tries to use the last available one...Y: in my case because on a normal "opened session" my personal remote shared folder is mapped on Z:...
But sometimes, at remote location, or for any reason in the boot up process, the Z: letter is free when AdobeDrive mount, and so I get some errors/confusions in some file paths...
So is there a way to "freeze" the default letter AdobeDrive have to use ?
Thanks

Hi,
Is there any preference somewhere to help Adobe Drive using always the same drive letter?
By default, it looks like AdobeDrive tries to use the last available one...Y: in my case because on a normal "opened session" my personal remote shared folder is mapped on Z:...
But sometimes, at remote location, or for any reason in the boot up process, the Z: letter is free when AdobeDrive mount, and so I get some errors/confusions in some file paths...
So is there a way to "freeze" the default letter AdobeDrive have to use ?
Thanks

Aperture 3 and MobileMe Galleries created in iPhoto

I wanted to post this to hopefully help someone else should they run into the same thing.
I recently upgraded from point and shoot camera's to a higher quality camera, so I also decided that it was time to upgrade from iPhoto to something better. I decided on Aperture as I am not quite ready to commit to the expense and time to learn something as complex as Photoshop.
Well, the first time I opened Aperture and told it to import my iPhoto library, it worked without any difficulty. But, I noticed something was missing. My MobileMe galleries where not displayed in the inspector window for Aperture. I could not for the life of me, figure out how to get them to show up in there either.
I went to the Apple store and talked to some Aperture users there and no one could seem to tell me how to fix this. It was even more frustrating because all of my photo albums from FaceBook came up in Aperture just fine.
Finally in a last ditch, hail mary pass, of an idea, I went to the web UI for my MobileMe galleries. I figured that maybe if I edited something about those galleries, they would then show up in Aperture.
Well, I went into the properties for one of the galleries that I was not seeing in Aperture, and low and behold, there in the properties was an option to choose what application that gallery would sync to. The only options are iPhoto or Aperture, so I changed each gallery to show Aperture as the chosen app to sync with.
Finally they now show in Aperture, of course, as you might expect, they no longer show in iPhoto.
I have no idea why the Import process does not warn you about this, and / or offer to change them for you, but it was very frustrating.
If this can help someone else new to Aperture to avoid this frustration, then I am glad.

Thanks Richard, very helpful. I wondered why I couldn't see my old mobileme galleries in Aperture.
I have swapped between iPhoto '09, Aperture 3, iPhoto '11 and now back to Aperture. Whilst I love the ease of use and relative speed of iPhoto, Aperture's adjustments and masters/versions handling has the edge for me now that my masters collection is too big for my MBP. And with a clean install of Lion my machine now seems more responsive than it has been for a while.
Changing the setting of each gallery is a bit dull, is there a global 'manage mobile me galleries with iPhoto/Aperture' setting anywhere?

Why can't iPhone play movies in MobileMe galleries published from iPhoto?

I have movies published to my MobileMe galleries from iPhoto or QuickTime. They are in .m4v format, but the iPhone doesn't play them. Does anyone know why?

I have the same problem...movies uploaded directly from iPhoto to the MobileMe gallery. When you double-click on the movies to play, you get, "Quicktime is unable to play this movie. Please try again." This happens regardless of whether I'm logged into MobileMe or viewing my gallery as anyone else would.
If I upload movies from iMovie, they work fine. Anyone have any ideas?

Will the photo book made in iPhoto 06 convert okay in iPhoto 09?

I could not order a photobook made in iPhoto 06 in my country (which is now available with 09). So if I upgrade to iPhoto 09, will my photobook be intact when I have upgraded to 09?
Ths

Sort of
iPhoto '09 has some new themes and some old ones go away so that can be an issue or not depending the theme you used, the layouts you used and some luck
See Liz Castro's web page for examples of the iPhoto '09 themes and layouts - http://www.lizcastro.com/iphotobookthemes/pmwiki.php?n=Main.FamilyAlbum
And there are many more options and layouts in iPhoto '09
LN

Managing the Derby Network Server remotely by using the servlet interface

Hi, im not able to deploy derby.war from derby 10.4.1.3, as indicated in the Derby Server and Administration Guide, using Sun Java System Application Server 9.1 Update 2.
Following is the deployment's errors log:
STATIC VERIFICATION RESULTS
NUMBER OF FAILURES/WARNINGS/ERRORS
# of Failures : 2
# of Warnings : 0
# of Errors : 0
RESULTS FOR WEB-RELATED TESTS
FAILED TESTS :
Test Name : tests.web.WelcomeFile
Test Assertion : welcome-file element contains the file name to use as a default welcome file.
Test Description : For [ C:\Users\Ramiro\.personalDomain\personalDomain\applications\j2ee-modules\derby ]
Error: Welcome file URL [ /derbynet ] must be a partial URL with no trailing or leading /.
Test Name : tests.web.WebArchiveClassesLoadable
Test Assertion : All classes in this Web Archive are loadable excluding classes used in JSPs. The test AllJSPsMustBeCompilable takes care of reporting non portable errors in JSP classes.
Test Description : For [ C:\Users\Ramiro\.personalDomain\personalDomain\applications\j2ee-modules\derby ]
Failed to find following classes:
org.apache.xalan.serialize.SerializerFactory,
org.apache.xpath.XPath,
org.apache.xpath.XPathContext,
org.apache.xpath.objects.XNodeSet,
org.apache.xalan.serialize.DOMSerializer,
org.apache.xalan.serialize.Serializer,
org.apache.xpath.objects.XObject,
org.apache.xml.utils.PrefixResolverDefault,
org.apache.xalan.templates.OutputProperties
referenced in the following call stack :
at org.apache.derby.iapi.types.SqlXmlUtil
at org.apache.derby.iapi.types.XMLDataValue
at org.apache.derby.iapi.types.DataValueFactory
at org.apache.derby.iapi.types.SQLDate
at org.apache.derby.iapi.types.SQLTime
at org.apache.derby.iapi.types.SQLChar
at org.apache.derby.iapi.types.SQLVarchar
at org.apache.derby.iapi.types.SQLLongvarchar
at org.apache.derby.iapi.types.TypeId
at org.apache.derby.iapi.types.DataTypeDescriptor
at org.apache.derby.iapi.sql.ResultColumnDescriptor
at org.apache.derby.iapi.sql.ResultDescription
at org.apache.derby.iapi.sql.execute.ExecutionFactory
at org.apache.derby.iapi.sql.execute.ExecutionContext
at org.apache.derby.iapi.sql.conn.LanguageConnectionContext
at org.apache.derby.iapi.db.Database
at org.apache.derby.impl.drda.DRDAConnThread
at org.apache.derby.impl.drda.DDMWriter
at org.apache.derby.impl.drda.NetworkServerControlImpl
at org.apache.derby.drda.NetworkServerControl
at org.apache.derby.drda.NetServlet
Please either bundle the above mentioned classes in the application or use optional packaging support for them.
END OF STATIC VERIFICATION RESULTS
-----

ramiro wrote:
Hi, im not able to deploy derby.war from derby 10.4.1.3, as indicated in the Derby Server and Administration Guide, using Sun Java System Application Server 9.1 Update 2.Best I can guess is that you are attempting to remotely install derby.
That is a pretty specific question and I suspect there is a specific derb forum as well.
As a guess you probably failed to follow the docs on pre-reqs.

Is it possible to reduce the number of HTTP calls when using a ReportViewer control?

My application is written in .Net 4 using Visual Studio 2010 (version 10 of the ReportViewer control). The report in question contains a lot of data in the dropdowns used for parameter selection. For example, one dropdown contains 95k options and another
uses 24k options (I know this is bad design, but we need to keep it as-is for this release). When I use Fiddler to profile the report, I see that it makes a lot of HTTP calls and a majority return the same dataset. There are three phases of loading data. Each
one initiates a series of HTTP calls.
Loading the initial header with the filter controls (dropdowns, textboxes, etc).
Changing one of the dropdowns that has a dependent dropdown (start date/end date)
Loading the final report after clicking the View Report button
In total, 13 HTTP calls are made and 10 of those are returning the same 10MB of data. The final report only returns 13 records, but the whole process of loading the report filters, changing report filters and loading the report require 130MB of data to be
exchanged. This is an extreme example, but we do have other reports that are doing the same with smaller amounts of data.
My question: is there any way to modify the ReportViewer or the SSRS server to reduce the number of calls? Is this related to ViewState? Please understand that I am new to Reporting Services and have a lot to learn.

Hi rodeofive,
As per my understanding, the issue is a performance issue. And it is caused by there are thousands of values in the drop-down list of parameters in the report.
To work around this issue, I suggest you should make some changes in the report. For example, we can add additional two parameters with multiple keywords ahead, one for the dropdown contains 95k options, another for dropdown contains 24k options. Then all
of available values which are begin with the keywords will display in the parameter list. In this scenario, we can create cascading parameters. One is a keyword parameter, and the other parameter is the drop-down list that based on the keyword to display the
available values.
For more details about the method, please refer to the following FAQ:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de6c783-9cb4-4b95-9be8-b59bc0049866/forum-faqhow-do-i-add-a-search-feature-in-the-parameter-with-long-drop-down-list?forum=sqlreportingservices#8de6c783-9cb4-4b95-9be8-b59bc0049866
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Is it possible to force the user to login again when using oauth 2 (implicit grant)

Hi,
I'm trying to build an application based on a rest webservice in APEX which is being accessed by a javascript frontend via ORDS. I'm using the "Implicit grant" flow of OAUTH 2.
When the user is finished with the application, he/she should be able to logout of the application, so another user can login (on the same machine and browser). But, without clearing all cookies, ORDS will automatically give an access token for the previous user, without showing the login screen to allow/deby access to the rest web service.
(Clearing the cookies is not possible via javascript, since they are httponly)
I know it is not the "normal" way to use oauth2, but I would like to be able to log-out a user. So how can I force ORDS to show the loginscreen again to give another user the possibility to login?
Alexander

You can force the implicit code flow to prompt the user to sign in by including _auth_=force in the approval request query string. To follow the example shown in the developer guide [1]
change:
https://server:port/ords/resteasy/oauth2/auth?response_type=token&client_id=CLIENT_IDENTIFIER&state=STATE
to:
https://server:port/ords/resteasy/oauth2/auth?response_type=token&client_id=CLIENT_IDENTIFIER&state=STATE&_auth_=force
[1]: REST Data Services Developers Guide

Possible to manage the MobileMe galleries made by iPhoto using Aperture3?

Similar Messages

Maybe you are looking for