Possible to output to multiple bluetooth speakers in Leopard

I am currently using my Mac to output to a pair of Bluetooth speakers, which works great for ITunes. I'd like to output to multiple sets of speakers(two) so that I can have music in two rooms - does anyone know if that is possible?
Thanks!

Hi Fred ;
How about some additional information; such as how you are downloading and where are they being downloaded from?
Allan

Similar Messages

Multiple Bluetooth speakers - selecting and naming issues

I've recently added a pair of Bluetooth speakers to what had been an all AirPlay setup (5 AX units, 4 Ethernet, 1 wireless). Now I've added a pair of Bluetooth speakers and I'm having some issues in using them
iPhone 5 running 7.1
The two Bluetooth speakers are the same brand, so they are displayed identically
Is it possible to rename these using the iphone so they have unique names?
Bigger problem is in selecting which speaker I want to use at point in time. The iPhone doesn't give an option to not use a speaker. It seems to select the speaker on its own -- only option offered is to "forget" the speaker. I don't want to have to discover the speaker each time I go to use it. Is there a way to tell the iphone which speaker I want to use? Only work around I have found is to turn off the speaker I don't want to use
Is there a better way?
Thx, Carlos

Just bumping in case anyone has thoughts
Thx

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

Is it possible to output multiple clips from a multitrack session, at the same time?

I'm using Audition CC 2014.2
on Windows 7 Pro x64
I am trying to figure out how to output several clips from a multitrack session, at the same time.
A session like this:
Is it possible to output 5 files right now?
I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
Any ideas?

They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
Ahh ok, use markers?
So, this sort of thing isn't possible in multitrack mode then?
If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
But, it seems like this functionality is currently missing.

Want to use bluetooth speakers with volume control, don't want the iPad internal speaker sound, is this possible?

want to use bluetooth speakers with volume control, don't want the sound at the iPad internal speakers, only on the external speakers. is the possible? and how

You can't downgrade the iOS.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Multiple bluetooth devices(Speakers) attached to Ipad mini

Hi There , I wonder if you can tell me if I can connect multiple ie 2 or 3 seperate bluetooth speakers to my Ipad mini as I have speakers in different rooms in the house and wanted to know if I can connect more than one at a time so I get music through the house , Thanks J

You can connect multiple, but the ipad is limited to playback on a single device.
There are methods to add splitters with additional bluetooth broadcasters to achieve what you want, but it is not an inexpensive option.
Itunes on a computer does offer multiple speaker options.

Possible to Adjust Airplay Lag to Sync Multiple Airplay Speakers?

When playing to 2 different ATV2s, my iTunes music is not in sync between two sets of speakers. Is there anyway to adjust the lag time to one of the ATVs?
Here is my setup:
- Living Room - one ATV2 hooked up to my TV via HDMI, with powered speakers hooked up to my TV's audio output;
- Bedroom - one ATV2 hooked up directly to powered speakers (only used for music).
After reading through the forums, I am fairly certain the sync problem is due to the extra time my TV takes to process the audio signal before outputting the audio to the connected speakers. But what I have not been able to find is a solution to this problem. Basically what I need to do is delay the signal to the bedroom ATV maybe 0.5 seconds. Are there any 3rd party applications that can fix this? Will Apple ever release a solution?

I just found something out about the Rogue Amoeba software Airfoil on another thread here. People are complaining that there is something wrong with the Pioneer recievers (my reciever as well) as this is where they experience the delay. I don't think they understand that the reciever, like your TV, is processing the signal before it outputs it to the speakers as opposed to basic powered speakers that just shoot the signal out. Anyway the aforementioned software has an option to delay the signal of the individual airplay devices. I have used this software before and it has given me fits with much more severe sync issues in the past, but that was years ago now, so maybe they have fixed that. I haven't tried it recently. Anyhow, here are the instructions I found for individually syncing the devices using the Rogue Amoeba Airfoil;
We do offer a manual sync adjustment, as a debugging tool, in Airfoil. Please note that this is not supported for everyday use - on a network which is functioning properly, it shouldn't be needed at all. That said, you can try it if you like.
To enable the sync adjustment, follow these steps:
1) Quit and re-launch Airfoil while holding down the option key. This will bring up the debugging window.
2) Turn the Sync Adjustment debugger to On, and click Done.
Now each remote speaker will have an additional slider below the volume slider - that's the sync adjustment. The center is 0 offset, and the ends are +/-1 second. Adjustments only take effect when connecting, so if you're experimenting with it, you'll need to disconnect, adjust, and then reconnect to see how well it worked.
Airfoil will remember your adjustments after you quit, even if you turn Sync Adjustment off. (All that does is enable/disable the GUI, not the adjustment settings.)

X2 Bluetooth Speakers

Hi there,
I have just bought 2 Sony Bluetooth speakers for my Macbook, they are identical. I do NOT want to use them both at the same time, 1 is for upstairs and 1 is for downstairs. But I can only get 1 working. I think it is because they are identical, the Mac cannot figure out that they are actually separate speakers. Does anybody have any ideas for me to try.
Also, is it possible to rename the bluetooth speakers
Thank you
Owen

bluetooth only has a range of about 30ft, not including walls, ceilings, etc. FYI.
think you will have to build this as an audio aggregate output device in the Audio MIDI setup utility: http://www.apple.com/pro/techniques/aggregateaudio/

Is it possible to use the built-in speakers when headphone connected?

I have a mini amp and speakers connected via the headphone jack on my late 2009 21.5" iMac.
First, is this the proper way to make this connection?
If I want to switch to use the built-in speakers, I can do so by unplugging the external amp. However, it seems that there should be a way to do this via software. But, I can't find it. Is it possible? If so, how?
I don't always want to make use of the external amp, I want to use it for music and videos, but not otherwise. And, I don't want to have to unplug it when it's not in use.
Thanks.

System prefs> sound> output.
select your internal speakers in there.
No need to unplug your mini amp.
This actually works on your Mac? I doubt it. This does not work on either the Early '06 iMac, nor the Early '09 Mac mini in my house. When anything analog is plugged into the audio-out port, the name of the device in Sys Prefs/Sound/Output simply changes from Internal Speakers to Headphones, there is no option for one or the other.
This has been asked over and over here, and I know of no way to do what the OP has asked.
Dah•veed

Is ther a way to send music to multiple airplay speakers on my ipad without having to use itunes

Hello all, l have a question that relates to air play and my ipad 4.
ls there a way to send music to multiple airplay speakers with my ipad 4 without having to use itunes as the master controller on my other PC. l know it is possible with itunes, but surely the ipad should be able to play to more than one airplay device at a time, we are living in the year 2013.
Is there an alternative and if there is not, could someone please explain or point me in the wright direction why it is so!
Thank you all in advance for your comments

Yes there is and I'll be happy to email you how. [email protected] is my address.

Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

You can only connect to one device at a time using Bluetooth, See article below for more information.
http://support.apple.com/kb/ht1664
While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

Can I use bluetooth speakers with my IMac

I want some wireless speakers to use outdoors. If I get bluetooth speakers and pair them with my iMac (MountainLion) will I be able to listen to iTunes output.

You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

Watching iTunes Movie on Apple TV while streaming sound to multiple AirPlay speakers

Hi Everyone,
I bought a pair of Airplay speakers and Apple TV 3rd generation to watch my Movies in the iTunes library. Importantly, I want to listen to the movies sound on multiple Airplay speakers while watching. So far I couldn't activate the speakers, once I started the movie.
Has anyone an idea, how to do that?

Thanks a lot for your answer.
I'm doing signal processing and work with videos professionally. The audio signal is technically always separated (and extractable) from the video frames. I don't see why the audio shouldn't be possible to be distributed to different airplay clients?
Do you mean that this option is just not supported by apple? In this case, do you know if it is at least possible to stream to multiple apple TV's at the same time?

Can I use bluetooth speakers and wired speakers together

Can I use bluetooth speakers and wired speakers together?

You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

Send output to multiple recepients(Using External send)

Hi
Using the external send for outputs we can send the email of outputs to customers using the email id given in the customer master record , Is it possible to send the output to multiple recepints the same output?
Because in the customer master we can add more than one email id but system will select only one email id for sending the output.
Thanks and Regards,
Ananda

Hi Raj,
The requirement is for one customer master if i want to add more then one email id and for those email ids , I want to generate a invoice output using VF02 , We can add more than one email id in Customer master but we can not use all the email ids the same time to trigger the output.
If I want to send the output to multiple email ids maintained in the customer master , how i can do that?
Thanks
Ananda

Possible to output to multiple bluetooth speakers in Leopard

Similar Messages

Maybe you are looking for