Possible to remove the Dreamweaver error marker while coding

I find it annoying as hell how Dreamweaver finds a javascript error before I finish writing the line, and I've looked on google but could find anywhere to disable it, so I can code in peace.
Any ideas?

It's not something that is disabled, it's something that is fixed. See the following KB article:
http://kb2.adobe.com/cps/405/kb405604.html
I'd recommend starting with #4 and 12.

Similar Messages

"The following errors occurred while trying to open this page." Why?

Dear all,
I'm running an online store at http://bubblething.com. I created it with iWeb 08. It crashed and I've been trying to recreate it, partly from images retreived by Apple from their "webarchive" and partly with images created fresh. I But I keep getting a dropdown error box saying "The following errors occurred while trying to open this page." Then there's a list of the missing images, and the images are all crossed out on my page. This seems to be happening unpredictably, sometimes just a few days after I've worked on the page. What's happening? Is it because somehow I've moved files, and the links to the images are broken? Please help!

Safari > Preferences > Privacy > Cookies and website data:
Click “Remove All Website Data” button.
https://support.apple.com/en-us/HT203370

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

How to get the last error for while loop?

How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time .

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125).

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125). I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM. Any ideas why?

That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
In the Share to Media Browser dialog box choose the Large Size.
When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
Create a new project and click on the Media button near the lower right hand side of the Project Window.
Then click the Movies button in the Browser window just above that.
Under the iMovie star icon you should see the name of the project you shared out from iMovie.
Drag that into the project and burn the DVD.
If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
Bengt's tips for great DVDs

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE.

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly

Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

Can I remove the video of myself while on facetime

Can I remove the video of myself while on facetime, I find it useful for the fisrt few seconds, then I want to remove it so it does not distract from my conversation.
Charles.

It depends - do you have your MS Office apps inside of this folder? Can you post a screenshot both before the folder is opened and after the folder is opened? See -> http://support.apple.com/kb/HT5775?viewlocale=en_US&locale=en_US.
Call back,
Clinton

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

Getting the following error message while login to OFA Analyst

Hi
I am getting the following error message while connecting to a OFA Analyst database and then I am not able to see any of the reports in OFA Analyst.
(MXXEQ35) RE.IWYD_Z70945 is not a valid RE.ENTRY
I think one of the report entry is corrupted in catalog but I am not sure how to restore/resolve it. Is there any way to resolve this problem ?
This is urgent Please let me know if any one have work around for this.
Thanks
Murugesan

See Note 230019.1 on Metalink for the solution to this problem.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!

Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Is it possible to remove the delimiting line between Bookmarks bar and Tab bar?

I place the Tab bar between the Bookmarks bar and the page content area, as the attached image shows.
Is it possible to remove the delimiting line between Bookmarks bar and Tab bar? I feel that line is redundant.

Your Tab bar doesn't look standard.
Did you check the code with the default theme if you currently use a custom theme?
''(note that you can still use the code with a smaller font size if you like the monospace font; I do prefer this to make it easier to click the mouse)''

The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi. I'm looking for a possibility to use the iPad for photography while traveling, without

the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?

Check out pogo plug device, it allows you to upload camera roll via wifi.

Possible to remove the Dreamweaver error marker while coding

Similar Messages

Maybe you are looking for