Possible to rename DC in DTR?

Hi,
Is it possible to rename an already created Web Dynpro DC which is created in DTR?
Thanks in advance!
Robin

Hi Robin,
Just create on empty DC and copy the
web dynpro component from your previous DC.
you need to recreate model.
It will ask you to add files into DTR. say yes and your DC will be copied.
copying a model folders and wdmodelclassed from SRC folder will help you in copying model. but advisable is recreate model.

Similar Messages

Possible to rename popup strings upon changing `Chapter` field in `Composition Marker` dialog?

Hi There,
I am in need to dynamically change the values inside a popup upon a user changing the value of the `Chapter` field within the `Composition Marker` dialog. I realize that we cannot add new string values to a popup at runtime, but I read a thread in this forum, and in the `Supervisor` example in the SDK, that it is possible to rename them. However, it seems like the event for making the changes to those values is triggered by a user changing values in the parameter set of the plugin itself.
So my idea is to populate a popup param with 20 strings--for example, 1, 2, 3, . . . 20. Then when a user enters in a string within the `Chapter` field in a `Composition Marker` dialog, it updates the popup list to show the user entered string. Is this possible? I know I can access the string in the `Chapter` field via javascript ExtendScript. Can I do it within C++ code?
Thanks for your time and help!

to get the marker string you should use AEGP_GetMarkerString() with AEGP_MarkerString_CHAPTER. as for changing the popup values, by looking at the thread you pointed out, it seems it's possible to change the popup names at any time, and not during a specific code. the entire accessing of the popup data in that example was done using AEGP calls, which should not be affected by the calling time. (except for rare cases) never tried it myself. can vouch for my advice here. since popup param's amount of entries can't be changed dynamically (to the best of my knowledge), you can create 30 (or any other number) of hidden popup params, starting with 1 entry and ending with 30 entries in it, and make only the param that fits your purposes best at that moment - visible.

Is there a possibility to rename the dashboard after generating the reports

hai,
is there a possibility to rename the dashboard after generating the reports in the dashboards with out affecting the reports.
if it is possible, plz explain me in detail to process...
Thanks in advance.

hi..
This procedure explains you Renaming dashboards from BI Answers window itself..
Login answers, go to Settings > Administration.
Click on Manage Presentation Catalog
Select Show Hidden Items check box appears under reports list...
Select the Shared folder name, then go to _Portal*
here you find all the dashboard names
Click on rename button corresponding to the dashboard.. and rename it..
Regards
Kishore Guggilla

Is it possible to rename app icons on the home screen?

When I save an app or bookmark to the home screen, I invariably get the name wrong so that I want to rename it. But I can't find out how to. Is it possible to rename, or do I have to start all over again?
Thanks

Delete the bookmark and then re-save it, That's the only way that I have found.

Is it possible to rename USB AUDIO CODEC to something more memorable?

Hi there
My system is getting very confusing with so many selectable USB AUDIO CODECs all named
"USB Audio Codec"
(USB Alesis M1Active 520USB Speakers, Yamaha Audiogram3 USB Audio Interface)
Is it possible to rename them so I know which one is which as I'm spending so much time going through each one to find the right Input/Output.
Thanks!

My guess is that OS X gets that name from the driver of that Device itself. If that is the case, then you can't rename it. This is the same problem with various MIDI devices that are displayed in Logic with the weirdest names.
However,
you can use a trick if you really want to rename a device so when you open GarageBand it says "My beloved Device". Create an Aggregate Device in the Audio MIDI utility with only that one device. The advantage is that you can rename an Aggregate Device - Voila.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Is it possible to rename a user in Oracle 10g

Hi all,
Is it possible to rename a user in Oracle 10g?
Thanks & Cheers
Antony

No, you can't rename user directly.
similar post
Re: How to rename a database user?
and here
Re: Can I rename a user?

Is it possible to rename photo in the "camera roll" OR reset the photo number in iphone 4s? (Clearly explained the situation)

Hi everyone, nice to meet you all. This is my first discussion starting in here and nice to meet you all. I used Android device before and this is my first apple mobile that I owned. I am using iphone 4s. (5.0.1)
I have search a lot but no answer that how can I rename the photo in the camera roll in iphone or in Windows 7.
What I want to do is:
I have IMG_0006, IMG_0007, IMG_0015, IMG_0016, IMG_0017, total 5 files.
I want to change the name that make their sequence will become IMG_0001, IMG_0002, IMG_0003, IMG_0004, IMG_0005 and I want the following picture will take place in IMG_0006. (This is just what I want but it never happened)
but seems that I can't rename them and I have tried that if I take 2 pictures after IMG_0017, but I delete them (which is delete IMG_0018 and IMG_0019), then take another new picture again, it will name as IMG_0020 instead of IMG_0018.
Questions:
1. Are there any methods to reset the photo number by deleting file under the "PhotoData" that we can see in iPhone Explorer?
OR
2. Are there any methods to rename the photo in the "camera roll" folder?
I have tried to rename the photo directly in iPhone Explorer but it will make the photo cannot be read in iphone.
3. Is it possible that I can rename them directly and rebuild the camera roll by deleting the Photos.sqlite under the PhotoData folder to solve the unreadable problem in iphone 4?
Thanks a lot to read all of the words above

Thanks for your quick reply. I think I have tried but I cannot.
There are no any options to let you choose "rename" in Windows 7 if you connect the iphone via USB
I have tried to rename the photo directly in iPhone Explorer but it will make the photo cannot be read in iphone and just got nothing to show on its screen until I rename it into the previos name again then the picture will show properly.
May be it can but I do not know how to rename them in Windows 7, could you please show me step by step?

Is it possible to rename an ASM folder?

i want to rename an ASM folder containing my database:
+DBDNL2_G2_DATA_AREA/EVJA/DATAFILE
to
+DBDNL2_G2_DATA_AREA/DITOC/DATAFILE
I do not want any file movement or file copying, just rename the folder and afterwards I rename the datafiles of the database. is this possible?
Regards,
Tim

You can't. This folder is the name of Your database and it's a part Oracle Managed Files hieararchy.
You can make directory DITOC and then make aliases to Your db files.

Is it possible to rename MSSQL Instance Name

Hi everyone,
I have two sql instances installed in two node failover cluster mode, i want to rename one of my sql instance, is it possible to change instance name ,
if possible please suggest the way how i can rename the instance name.

Hello,
Please read the following article.
https://msdn.microsoft.com/en-us/library/ms178083.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Possible to rename default scratch folders?

Hi all,
We've just streamlined our directory structures at work and all is good ASIDE from FCP's scratch settings. I have a problem with the default setting of RAID>Capture Scratch>PROJECT because it makes backing up unduly difficult. All the other media is sitting in RAID>PROJECT, hence backing up is a basic one-step copy/paste procedure.
Now the obvious way around it is to remap the scratch settings every time I open a different project, like so: RAID>PROJECT>Capture Scratch. But this leaves a redundant and unnecessary folder within Capture Scratch. Is there any way to tell FCP NOT to create a project subdirectory under Capture Scratch?
And while we're on the subject, we use an uppercase, underscore only system so is it also possible to force FCP into following this protocol? I know its no big deal, but if possible it would sure save renaming the folders and reconnecting every project.
Thanks for reading, I'm guessing the answers are no and no.
G5 Mac OS X (10.4.2)

Hi 138
I honestly don't see the problem.
If you always select RAID in the Capture Scratch preset in FCP, then all Captured material will allways be in RAID > FINAL CUT PRO DOCUMENTS > Project_name.
As long as you give your project a name (with underscores in your case) BEFORE starting to capture, all captures will always be in that folder.
Even easier for backup is to know that all Timecode related Media is in that folder, while you can put all the other stuff (graphics etc) in your own RAID > project_name folder. You then can make the choice to only backup the latter and don't backup the videomedia and keep the cameratapes instead.
Rienk

Possible to rename GB files?

Hello... I'm wondering if it's possible to simply click once or twice on a GB 2.0 filename and have it become editable, the way you can almost any other Mac-bsaed document (e.g. Word, Appleworks, even Photoshop). I.e. is it possible to completely (or even partly) rename a file in the Finder and have GB (and/or the Finder) know what I'm referring to, so that I can locate the intended file using this new name in the future?

Yes.

Is it possible to rename an external drive without wiping it?

Hello
One of my three external USB drives houses my iTunes library. However, I originally intended to use this drive for backup, so I called it 'Time Machine' when I originally formatted it. I have now bought another drive for backup, so would like to change the name of the first drive, without causing either iTunes or the Mac OS to have a nervous breakdown. What should/ can I do?
Thanks

Hello, Cameron.
I think you could just rename the drive in Finder and then change the location of your iTunes library to it's location on the renamed drive.
When iTunes cannot find your library on the drive with the old name, it will ask you to either create a new library or choose an existing library, so you will want to choose your existing library on your renamed disk.
I hope this answers your question.
Good luck!

Is it possible to rename an external hard drive without losing links to my media?

Hello all. I am new to Apple and FCP, so I may be going about this all wrong. I have a new Mac Pro, OS X version 10.9.5, running FCPX version 10.1.3. I have copied all of my data from a 1T external hard drive to a new 4T external hard drive, but FCPX doesn't recognize my media files unless I rename the new drive to that of the old one. The problem is I want to continue using the old one. Is there an easy way to relink my files and keep the original name of the new drive?
Thanks.

douglas57 wrote:
I just spent 4 months editing a feature length documentary and I only understand about 10% of FCP. Only thing we can do is keep plugging away.
Good luck...
I've been using Final Cut Pro (pre-X) since v1.0 and I only ever used about 29% of the capabilities. However, most of the lesser functions slapped onto Ye Olde FCP were lame, unfinished, niche-focused or broken.

Is it possible to rename a property when generate web service proxy?

We have issue to generate client proxy because of following schema:
<xs:complexType name="Provider">
<xs:sequence>
<xs:element minOccurs="0" name="SSN" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="Ssn" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
This is from our vendor's wsdl file. Two "ssn" with different case are intentionally kept for backward compatibility. Is there a way to get around the issue? Here is the error message:
Caused by: java.lang.IllegalArgumentException: trying to create the same field twice: ssn
     at com.sun.codemodel.JDefinedClass.field(JDefinedClass.java:419)
     at com.sun.codemodel.JDefinedClass.field(JDefinedClass.java:390)
     at com.sun.tools.xjc.generator.bean.field.AbstractFieldWithVar.createField(AbstractFieldWithVar.java:72)
     at com.sun.tools.xjc.generator.bean.field.SingleField.<init>(SingleField.java:89)
     at com.sun.tools.xjc.generator.bean.field.SingleField.<init>(SingleField.java:76)
     at sun.reflect.GeneratedConstructorAccessor175.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at com.sun.tools.xjc.generator.bean.field.GenericFieldRenderer.generate(GenericFieldRenderer.java:64)
     at com.sun.tools.xjc.generator.bean.field.DefaultFieldRenderer.generate(DefaultFieldRenderer.java:79)
     at com.sun.tools.xjc.generator.bean.BeanGenerator.generateFieldDecl(BeanGenerator.java:754)
     at com.sun.tools.xjc.generator.bean.BeanGenerator.generateClassBody(BeanGenerator.java:542)
     at com.sun.tools.xjc.generator.bean.BeanGenerator.<init>(BeanGenerator.java:242)
     at com.sun.tools.xjc.generator.bean.BeanGenerator.generate(BeanGenerator.java:182)
     at com.sun.tools.xjc.model.Model.generateCode(Model.java:286)
     at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:252)
     at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:85)
     at com.sun.tools.ws.processor.modeler.wsdl.JAXBModelBuilder.bind(JAXBModelBuilder.java:134)
     at com.sun.tools.ws.processor.modeler.wsdl.WSDLModeler.buildJAXBModel(WSDLModeler.java:2255)
     at com.sun.tools.ws.processor.modeler.wsdl.WSDLModeler.internalBuildModel(WSDLModeler.java:194)
     at com.sun.tools.ws.processor.modeler.wsdl.WSDLModeler.buildModel(WSDLModeler.java:140)
     at com.sun.tools.ws.wscompile.WsimportTool.buildWsdlModel(WsimportTool.java:261)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.buildWsdlModel(JDevWsimportTool.java:381)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.buildWsdlModel(JDevWsimportTool.java:344)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.access$000(JDevWsimportTool.java:91)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool$1.derrive(JDevWsimportTool.java:161)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool$1.derrive(JDevWsimportTool.java:157)
     at oracle.javatools.util.deferred.DerivedCache$CachedResource.get(DerivedCache.java:144)

I tried to add a binding file to change one of the ssn to ssn1. Now The error message changed to "[ERROR] Two declarations cause a collision in the ObjectFactory class." We noticed if we generate the client proxy with default setting. It works fine (for other web services). Once we start to customize the generated code by changing package name or in this particular case change property name, Jdeveloper starts to complain the name collision. Does anyone know how to solve this? We prefer not to rename those names since there are too many name collisions. Besides the generated code will deviate from document too much if we try to rename those names with conflict.

Is it possible that rename table captured by streams

is there any way that i can capture rename table??

Just setup your rule for DDL to the schema level and it will.
Use dbms_streams_adm.add_schema_rules instead of dbms_streams_adm.add_table_rules.
Regards,

Possible to rename DC in DTR?

Similar Messages

Maybe you are looking for