Possible to reset component metrics in OEM?
Is it possible to reset the component metrics in OEM for a given composite app?
I'd like to run a baseline performance test, reset the metrics, then do a revised run & profile the change.
This is straightforward in OSB, but I haven't seen a way of doing it in OEM.
thanks
Garret
Hi...
If you are referring to a MobileMe account, try this support article > Mac OS X: Resetting the SyncServices folder
If instead you are referring to restarting the AMDS, for Mac OS X v10.6.8 or earlier > iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X
Similar Messages
-
I produced some videos in iMovie 10.0.2 and transfered they to iTunes 11.1.4.
That worked so far....
After that I´ve compressed the movies for the use with iPhone and iPod
.....also worked.....
Then I tried to sync the movies to my iPhone4s with iOS7.0.4. The sync starts, runs and ends without an error. But after that I can´t find the movies on my phone. There is enough free memory on my phone and I also tried to shut the movie app and restart my phone. The movies are still not there.
When I check what´s on my phone with iTunes (iPhone connected), iTunes says the movies are on my phone!?!?!?
Maybe there are some troubles within a sync "library" or something like that? Is there a possibility to reset the sync services or whatever is responsible for the sync?
Or maybe somebody has another solution which solves the problem!?
The strange thing is that my music, books and all the other stuff will sync fine!
Hope that someone can help me with this issue.
thanks a lotI´ve fixed this issue as follows:
1) did a backup of the iPhone in the cloud
2) reset the iPhone in manufacturing mode
3) restored the backup out of the cloud
After that the sync with iTunes worked well also with movies. -
My iPhone does not have Facetime on it. I've tried going into restrictions, but there's a passcode that doesn't seem to be one that I've used before. Is it possible to reset the phone and then just restore a portion of the old information? I've tried several pass codes and now am locked out for an hour after being locked out for 5 minutes and then 15 minutes. It said that I had tried 7 pass codes prior to these, but I don't remember ever trying to get into restrictions before.
I've looked up other posts on this, and my phone was purchased in the US and does not have an AE in the model number.Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search -
Is it possible to reset password for any user using abap program
Hi friends,
Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
if any code for that to reset password please mail me.
Thanks & Regards,
YogeshHello Yogesh,
Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
=> Function Module - BAPI_USER_CHANGE
Call this in the program for resetting the password.
=> CALL TRANSACTION 'SU01' USING InternalTable
This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
Regards -
Is it possible to get component associated with DefaultListSelectionEvent?
Hallo,
Is it possible to get component associated with DefaultListSelectionEvent, please?
There are multiple tables in my window. All tables (must!) have same TableSelectionListener. Problem is that there's no information about component in default list selection model implementation. When fireing events DefaultListSelectionModel use self as event source (see DefaultListSelectionModel.fireValueChanged fragment below).
e = new ListSelectionEvent(this, firstIndex, lastIndex, isAdjusting);Any ideas how to get component in ListSelectionListener.valueChanged, please? But don't forget that as a programer, i am the lazy. Thus implementing new selection model is not an acceptable solution, but class extension is :p
One idea is to remember models component in constructor and override DefaultListSelectionModel.fireValueChanged like this:
class MyGreatListSelectionModel extends DefaultListSelectionModel {
protected JComponent boss;
public MyGreatListSelectionModel(JComponent c) {
boss = c;
@Override protected void fireValueChanged(int firstIndex, int lastIndex, boolean isAdjusting)
Object[] listeners = listenerList.getListenerList();
ListSelectionEvent e = null;
for (int i = listeners.length - 2; i >= 0; i -= 2) {
if (listeners[i] == ListSelectionListener.class) {
if (e == null) {
// Only changed 'this' to 'boss'
e = new ListSelectionEvent(boss, firstIndex, lastIndex, isAdjusting);
((ListSelectionListener)listeners[i+1]).valueChanged(e);
}This should work, but if there already exists some mechanism, such extension is just slowing app down.Thanks for your help.
However I could not get the result. I am using following code:
public void myaction(ActionEvent event)
FacesContext context = FacesContext.getCurrentInstance();
UIViewRoot view = context.getViewRoot();
UIComponent UI = view.findComponent("tab");
if(UI == null)
System.out.println("UI Not Found ");
else
System.out.println("Get Current FecesContext");
There is an Component having id "tab" is available on JSF page but I am getting "UI not Found" every time. Is there somthing wrong...Please suggest. -
Hi, I forgot my password for my mac book retina which I just bought 1 1/2 months ago.
Is there any possibility to reset it? I guess (not sure) the operating system is os x.Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command
until you do. If after seven tries you still do not receive a "Filesystem OK"
message, then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed. -
Setting thresholds for Metrics in OEM
I want to set thresholds for metrics in OEM and everytime I do, the following error occurs.
Error occurred while editing the metric thresholds.
Communication exception occurred while saving the thresholds data to the emd.
Error
java.lang.Exception: No such metric
Does anyone have any idea why this is happening and what can I do to fix it.
Thank youHi.
Monitoring templates are not permanently associated with targets.
Applying a template on a target updates the target's settings but if you modify the template afterwards you need re-apply it.
Furthermore, you can apply more than one template on a target. The second apply operation will generally override settings applied in the first one.
(As a best practice I would make sure that if I use more than one template for a specific target type , the different templates will
include different metrics).
Apply operations are logged and you can check which template was applied against which target.
This is available under "past apply operations" in the templates page.
HTH,
Erez. -
Possible to reset the workspace to mimic the older, classic PS look?
I really don't like the new workspace / palets layout in PS CC. Does anyone know if it's possible to reset the workspace / palets / interface look to mimic the older, classic PS look that we've all been using for so long?
-JohnThere's nothing radically different about Photoshop CC.
Don't speak for others. Many serious Photoshop users have upgraded through every version. The changes have all been evolutionary.
That said, for more specific help, maybe you could supply a little more info? How about describing specifics, such as what you're seeing that's different, how you'd like it to look.
For all you've written, it's possible that you may just want to disable the Application Frame in the Window menu. We can't really tell.
-Noel -
It is not possible to reset to factory State
Ciao
My pc has this problem: "it is not possible to reset to factory State"
Noteboock HP Pavilion dv6-6c65el
OS: Windows 7 Home Premium 64-bit SP1
CPU Intel Core i5-2450M CPU @ 2.50\3.10GHz hd3000 integrata
Graphics Radeon HD 7690M XT 2Gb GDDR5
BIOS Brand Hewlett-Packard
Version F.12 Date 10/26/2011
Hard disk (C) OS+(D) Recovery+(E) HpTools.
After performing "reset factory state" (with HP Recovery Manager) I noticed the malfunction IE9 32bit.
Moreover, the absence of other software preinstalled (missing: Hp Hp setup-documentation-IE9 64bit).
When I tried a new reset, HP Recovery Manager to the voice system recovery (factory state) tells me:
(disabled: to restore the system, use recovery media)
Using Recovery DVD (in excellent condition),you receive the following error message:
"windows as encountered a problem comunicating with a device connected to your computer-This errorcan be cause by umpluggin a
removable storage device such as an exsternal usb drive while the device is in use,or by faulty hardware such as hard drive or cd-rom drive
that is failing make sure any removable storage is properly connected and then restart your pc" Status:0xc00000c9 Info: an unespected I\O error as occurred"
The same happens with the F11 key during startup. Reset error.
The System Restore Microsoft does not resolve.
In Windows everything else seems to work and the hardware of the notebook has no problems.
The original dvd player has been replaced with a compatible; reads all the disks supported.
Only install MSE (I use only portable software).
There are no viruses or other malaware.
I performed procedures in hp support but nothing has changed.
You can find a solution?
Ciao e grazie
Lecce2
This question was solved.
View Solution.I have no more 'answer because my computer had crashed complete.
I apologize.
Order the media why?
If discs created the first time the PC will not work. I suppose that does not solve the problem discs hp (I also read about a problem like mine. This problem has not been resolved with the media bought by HP).
I shot weeks the web and I finally found the appropriate procedure.
I made several attempts to solve the problem. But now I have succeeded.
1- Show Hidden Files \ protected
2- Enter with a program (es: file commander) in recovery partition and copy the file or files base.wim. My is about 18 Gb, 1 file.
3- We need a second PC and dvd
4- Follow a procedure described by internauta 37.
Search "Ripristinare portatile HP senza DVD e se l'HP Recovery Manager non funziona Internauta37"
E 'was for me a little complicated but in the end I have my hp to the state of factory and everything works perfectly.
Thank you all -
Resetting the metrics shown in Oracle EM console
Using Oracle EM console we can see the metics with respective to the "Services and references" pertaining to a SOA composite. It shows number of faults and average processing time etc... Even after purging the SOA composites I still see the metrics displayed in EM. Can anyone share how we can reset these metrics and where exactly these metrics store.
Hi, have you got any solution to this problem? I am having exact the same issue in 11.1.1.6.
-
HT5312 Is it possible to reset security questions without a rescue email ?
I'm trying to buy some apps, but I need to answer the questions...Is it possible to reset security questions without a rescue email ?
Click here and request assistance.
(75046) -
My wifi will not change from off to on. I have done everything possible, including resetting my network settings. Internet is working fine on tablet etc.
Hello dthlah,
Thanks for the question. Based on the information you have provided, it sounds like your Wi-Fi option on an iPhone 4S is greyed out. The following article explains this issue and potential resolution:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Follow these steps to resolve the issue:
1. Verify that airplane mode is off by tapping Settings > Airplane Mode.
2. Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
3. Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
4. If your issue is still unresolved, perform a software restore in iTunes.
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
Thanks,
Matt M. -
my ipod wont charge and i have used different chargers for it is it possible to reset it while its dead?
I do not know what you mean by charger. Cable?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Is it possible to change instance and use OEM ?
We have 4 single DB instance in same oracle 11gr2 server on win2008R2.
We will not use grid control because of lack of time, knowledge and customer approval.
Is it possible to change instance and use OEM by changing ORACLE_UNQNAME variable or in any way ?840105 wrote:
IF what EdStevens said is true,
WHat environmental variable ,or othe settings shoud I set to start 4 different dbconsole and access those OEM in same server ?
"IF" what I said is true???
The same environment variables you set to start the database itself .....
Here's the environment with no oracle-specific settings:
oracle:$ env | grep ORA | sort
PS1=\n\u:$ORACLE_SID$
Now we set the environment for database 'orcl'
oracle:$ . oraenv
ORACLE_SID = [oracle] ? orcl
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1 is /u01/app/oracle
Now the environment looks like this:
oracle:orcl$ env | grep ORA | sort
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
ORACLE_SID=orcl
PS1=\n\u:$ORACLE_SID$
Start the dbcontrol
oracle:orcl$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://vblnxsrv01.vbdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ........................... started.
If Oracle would only provide documentation ... oh, wait!
Getting Started with Database Administration
Managing Oracle Enterprise Manager Database Control -
Is pagination possible with jmx metrics on OEM?
Hi, I implemented a MXBean interface which returns a list of objects (say, 100 rows of data). On oem, the list of 100 row data is displayed. However, I want to paginate that 100 rows, say 25 rows per display. Is this possible? I actually tried to have a parameter on the MXBean operation/attribute as the index and implement the pagination logic on the MXBean, but this still seems not possible because I have to give the value for that parameter at the time when I generate the metadata, and this parameter can not be changed once the monitoring target is added on OEM. So, I am wondering if pagination is possible with OEM, and how can I achieve that?
Thanks in advance!
-JCSince by definition a single EM agent must reside on a single database host, then, no, you can't monitor multiple hosts.
Unless you mean that you want to monitor multiple virtual hosts from a single physical host ... but in that case, you'd still need one host per database host.
That's just the way EM works. Always has, probably always will.
Maybe you are looking for
-
My iMessage on my mac is sending from my email. How do i change it to send from my phone number?
My iMessage on my mac is sending from my email. How do i change it to send from my phone number?
-
Issue when opening pdf using Jasper Report in WLS 9.2
hi I am new to jasper reports and I am using them in Java Page Flow in bea workshop 9.2 Jasper Report 2.0.4 Created .jasper using iReport In one of my action methods ServletOutputStream servletOutputStream = ge
-
Purchase order not visble for confirmation in SRM 7.0 portal
Hi all, I am basically a portal consultant .The functional consultant configured in such a way that once the user creates a shopping cart it will create a Purchase order. But when i go into central confirmation role and click on create confirmation
-
Can't upload TV Shows to new 30g iPod Video
We just purchased the new iPod Video (30g) and in Windows XP, iTunes 7 all of the songs and music videos uploaded. However, none of the TV Shows uploaded. Any ideas?
-
I have IE and Mozilla FF loaded on my vista run laptop. I have removed and reloaded the FF program without success. Once loaded I click the shortcut, but nothing happens. Internet Exployer runs fine. Help!!!!!! == 1 month ago == == User Agent == Mozi