Possible to run more than one iDVD at one time?

Hiya, I'm currently running a nice shiny QuadG5 and when running iDVD6 I've noticed it doesn't use all the resources my machine has to offer (it usually hovers at around 130% out of 400%). Does anyone know if it's possible to run more than one instance of iDVD06 at once? I was thinking about creating a copy of the whole iDVD app and seeing but it's running a render right now so i can't disturb it. Seems a shame to have those yummy G5's sitting there doing naff all.
cheers, Dave

on my other hp scanner and copier i could set the no of copies i wanted. on this one i cannnot find that option.
thanks for the reply

Similar Messages

Is it possible to run more than one case at a time?

Using a case structure, is it possible to have more than 1 case running at a time? I'm currently using a for loop's iteration terminal to select which case to run but each case contains a for loop with a timer delay. I want them all to run simultaneously somehow..?
Maybe possible using a different type of loop?
Thanks for any help.
Rob

> Using a case structure, is it possible to have more than 1 case
> running at a time? I'm currently using a for loop's iteration terminal
> to select which case to run but each case contains a for loop with a
> timer delay. I want them all to run simultaneously somehow..?
> Maybe possible using a different type of loop?
>
If it did this, we'd consider it a bug. By design, only one diagram of
a case is supposed to run, the one the selector specifies. If you want
them to run in parallel, put the contents into separate case statements
and use a Boolean to either run or skip the code.
For example, if you have cases run whenever their bit is set in an
integer, then you would have cases for bit 0, 1, 2, and 3. Instead of
putting them in one case, make fo
ur cases. Put the AND logic in front
of each for ANDing with 1, 2, 4, and 8, and wire the output Boolean to
the case structure. Now take i and wire it to the logic. The 0 diagram
will run on odd numbers, etc.
Greg McKaskle

Running more than one time machine back up drive

I have a back up drive assigned as my offices time machine back up drive.
I need to set up an off site back up drive too. I know that time machine will only allow a connection to one back up destination at once.
What problems could i encounter if i set up a off site drive as another time machine drive, disconnect on site drive and connect the off site drive to back up.
Thanks

That will work just fine, other than the hassle of having to tell Time Machine every time you swap.
Give the drives at least slightly different names (that's for you; Time Machine knows they're different).
Each set of backups will be complete and independent. When you do a backup to either one, it will contain all the changes you've made since the last backup +*to that drive.+*
The first backup after a swap may take a bit longer than usual, as there may be more changes to "catch up" with, but otherwise there should be no troubles.

When will this thing run more than one app at the same time?

When will we be able to run more than one app at a time?

As has been suggested, we won't know about future features until they announce them, but by understanding the current situation we can guess.
The current limitations on third-party applications running in the background make sense. It's not a technical limitation. App store downloads, and the phone functionality run in the background while other applications are up front.
It's a resource limitation. Processor power and probably more importantly battery life are the key limiting factors. It's not that Apple doesn't want you to have more functionality. It's that it currently struggling to deliver a quality experience that satisfies as many customers as possible. As it is the battery life is only just acceptable enough for most current customers, many are unhappy with it.
So if more efficient chips or batteries become available, or some genius programmer manages to squeeze out a whole lot more out of less, then we'll see more background processes allowed.

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

Is it possible to email more than one photo at a time with the iPhone? Thanks

Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

Yes. Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email. Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

Using Maverick, how is it possible to open more than one calendar window?

Hi, I'm using Maverick 10.9.1
My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
Many thanks in advance for your help!
ph

See if the section on group calendar helps.
http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

Is it possible to print more than one picture at a time on a single page and if so, how?

is it possible to print more than one picture at a time on a single page and if so, how?

Hi Rowegarth.
HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
You could also start with a "Design Your Own" collage print with a white theme.
This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
www.youtube.com/embed/VRoGjhXPm4I?rel=0
The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time. Apple and 3rd party applications - all freeze the main menu. Safe mode seems to work OK. Tried repairing permissions - didn't work.

For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?

Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

"A script is already running" while attempting to run more than one item

We upgrade recently to ODT 11.2.0.3.20. Since then, attempting to run more than one item from the Solution Explorer (by selecting the items, right-clicking, and selecting "Run") results in a popup error of "Oracle Developer Tools. A script is already running". If many items are selected it results in many error messages and only a random few of the items are actually executed on the server. Also, choosing "Run On" now results in it prompting for the target database for each item selected (rather than once for all items selected like it used to). This all used to work fine in the earlier release we were using. Has anyone else run into this? Any fixes? We used to use multi-select and "Run" or "Run On" to deploy multiple items at once, but this no longer works -- doing one at a time works, but if you have hundreds of items to run, this quickly becomes unusable.
Thanks for any insight.
- Josh

cshay wrote:
I don't believe that the intention was for you to be able to run a bunch of scripts one after the other. Often there are dependencies between scripts anyway and so you you have to order them. Because we're generally deploying a large set of stored procedures (and not just one-time scripts) the order doesn't really matter -- even if a stored procedure gets created before one it depends on, once all the SPs are on the server, the ones that are "invalid" will compile correctly once you execute them.
I think a lot of people are creating master scripts that references child scripts using the "@" sql plus syntax.... have you tried that?
I'll give that a try as a work around. Only issue I have with that solution is every time we add or remove something from the solution, we also have to update the script.
We are doing a lot of enhancements to our script generation in the coming year. Keep an eye out for a beta to test.
Like I said, this used to work fine in the older versions of ODT. It seems like the new version is attempting to execute multiple items at once on the same connection simultaneously, thus resulting in the "A script is already running" error. The old version used to be smart enough to execute them one at a time -- so something changed in a more recent version to completely break "Run" and "Run On" when you have more than one item highlighted (even just highlighting 2 items and choosing "Run" runs the first item, but then gives the error for the second item).
Christian- Josh

Is it possible to have more than one Tax code per line item in Billing docu

Is it possible to have more than one Tax code per line item in Billing document ?

Hi,
I have a different perspective there.
If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
Hope it helps

Using the the multiple profiles and running more than one instance of Fire fox at atim

I use F/F in a gaming situation I needed to be able to run more than one session at a time and read about a feature called multiple profiles. Then I read iin another forum that I could have multiple instances with the following bat file :
@echo off
set MOZ_NO_REMOTE=1
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -p-no-remote
set MOZ_NO_REMOTE=0
I also have the Beta 4.06 on my machine and even though the batch file directs it to wither the Beat or the Non Beta they both seem to track the profiles and can be used in either version.
However It's not working as I described running two browsers with grease monkey it will start to mis handle data and they both lock up

There is no need to set MOZ_NO_REMOTE, remove that part of the bat file. Change the start line to:
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -no-remote -p "profile name"

Is it possible to use more than one value in SUPPRESSCHARACTER option

Hi,
Is it possible to Suppress more than one value uisng SUPPRESSCHARACTER option in transformation file?
if yes, any syntax?
I have 'Z' and '1000' that i wish to suppress from the values being loaded. Any thoughts ?
Thanks.

HI,
i don't really know if it's possible to suppress more than one character, but you can do load your data in two steps in the first step skip all the information that has the Z character in your conversion file and skip all 1000 values, then repeat the process but this time skip the 1000 values and then suppress the Z value...
hope this helps,

Possible to run more than one iDVD at one time?

Similar Messages

Maybe you are looking for