Possible to S/W switch btwn 2.1 speakers and headphones with Audigy

Rather than spend money on an external headphone/speaker switch for gaming, I was wondering if its possible to set up the Audigy 4 to switch between my 2. speakers and headphones without having to swap the plugs around each time. I heard some sound cards can do this in software and have a dedicated headphone jack. Any help would be greatly appreciated.

Similar Messages

How can I switch on my Apple TV speakers when it asks "multiple speakers" I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work?

How can I get my Apple TV airplay to work from my PC. On the airplay symbol it says Multiple Peakers please choose but I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work from my PC. Everything is OK when using my Ipod touch.

Don't use Multiple Speakers option and just choose the AppleTV
What are you trying to Airplay? If it's iTunes content it's simpler to 'pull' the stream from the Computers icson on AppleTV by selecting the libarry and media.
If you are attempting to Airplay the desktop you can't.

X-fi for notebook won't switch between speakers and headphones

I have a Dell Studio 537 with the x-fi for notebook card. When inserted, I can hear songs through the headphones and the console correctly says 'headphones'. When I remove the headphone jack, the console switches to 'speakers' but I can't hear anything from the speakers. I can plug in headphones, it still says 'speakers' but I can hear the music.
The reverse is true. I can start out with music playing on the speakers and never be able to convert it to headphones without removing the card, closing everything, reinserting. It's a pain.
Is there anything I can do to fix this so I can leave the card in most of the time?
Thanks in advance?

Plug your speakers into the soundcard as usual.
use the front mounted headphone socket on the fromt of the X-Fi I/O unit to connect your headset and set the control panel to automatically mute your speakers when the headset is connected. Your speakers will mute when the headset is plugged in and all you have to do is plug or unplug the headset at the front to switch modes!...Now please do not ask about doing the same with your mike connector!! see other thread by me!! p.s creative do ship a /4" to 3.5mmm adapter with the card.
Hope I have understood your post
AndyMessage Edited by slef2003 on 0-4-2006 03:54 AM

Is it possible to connect an iPod touch to usual speakers and stream music?

i like the new airplay features but i'd apreciate if there was any way to connect my iPod touch 4G to my cheap Logitech Speekers and use my iTunes to select the music i wanna listen to with the speakers. Is that possible?

yes they do? but what to do now? i can actually connect my iphone to the speakers with the cable and play music with my ipod and listen to it through them. but i can't plug it in, turn my wi-fi on, let my iphone connected to the speakers & control the music played with itunes. or is there any possible way to manage that?

Software switch between internal speakers and digital out?

I have a brand new Aluminum iMac.
My iMac is connected to my stereo receiver with the built-in S/PDIF Digital Output.
But sometimes I'd like to just use my iMac's internal speakers, so I don't need to power up the receiver.
But when I plug in the digital cable, OS X turns off my speakers, and vice-versa. The Sound Control Panel doesn't give me the option.
I've googled for a while on this -- it looks like Windows leaves the digital output on even if the internal speakers are playing, so this is clearly a software issue.
Is there any way I can use software in Leopard to switch between my internal speakers and my digital output? (Or to use both at once?)

Funkey Monkey wrote:
Isn't there a software option out there somewhere?
I don't know fore sure, but I believe inserting a plug into
the audio output jack electrically disconnects the speakers.
Yep, totally brain-dead -- but so is the entire analog/digital
"combo jack" nonsense. It leaves you with no way to monitor
any digital audio signal being sent to an external device.
Not with headphones OR speakers!
IMO, the only workable solution is a USB or Firewire
audio interface. If you only need digital audio output,
the cheapest stuff available ($25-ish) should be fine.
If you also want good 24-bit A2D/D2A converters, mic
preamps, etc. expect to pay $150 and up.
..."clever" is usually the opposite of "smart",
Looby

IOS (iPad App)...possible to detect mute switch? volume off?

Is it possible to detect if the user has turned mute switch on? Is it possible to detect the system volume to determine if it is all the way down?
We would like to display a dialog box telling the user they need to turn up the volume on iPad or turn off the mute switch.
Thanks,
MAT

engineer003 wrote:
Maybe jailbreak would allow a system level patch to disable the switch like I suggested.
That's a topic that cannot be discussed on these forums
engineer003 wrote:
The so called Apple factory refurbished units I assume to mean they do repair returned units at some point and resell them? Otherwise why call them refurbished - they are just brand new?
Apple does not repair them. The manufacturer, Foxconn, does so back at their facilities in China. Apple just ships them back, and receives factory refurbished service units from them. That is why they are called refurbished and not repaired - they are fully refurbished by the actual manufacturer. They all get new screens and new battery, regardless of age or condition, any other faults are repaired and they are fully tested and come with a minimum of a 90 day warranty.

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

SF300 series is targeted for support in PI 2.0.

Hi i have a iphone5 I lost my password ha possibility I make the switch for 5s can not open the icloud?? if accepted as pay the difference? thank you for it helped.

hi i have a iphone5 I lost my password ha possibility I make the switch for 5s can not open the icloud?? if accepted as pay the difference? thank you for it helped.

Post in your native language. Your post is very difficult to understand. What password are you talking about? You device passcode? Your Apple ID password?

Hi, i bought second hand iphone 3 GS and wanted to switch it free over wlan and over itunes (windows), i tried many times but seems not to be possible.

hi, i bought second hand iphone 3 GS and wanted to switch it free over wlan and over itunes (windows), i tried many times but seems not to be possible.
Under itunes i made also the available tests, the connection always fails with the message that there is no secure connection to the apple server.....
any suggestions? Thks i advance

This Looks as if your phone has been hacked.

Is it possible to use the built-in speakers when headphone connected?

I have a mini amp and speakers connected via the headphone jack on my late 2009 21.5" iMac.
First, is this the proper way to make this connection?
If I want to switch to use the built-in speakers, I can do so by unplugging the external amp. However, it seems that there should be a way to do this via software. But, I can't find it. Is it possible? If so, how?
I don't always want to make use of the external amp, I want to use it for music and videos, but not otherwise. And, I don't want to have to unplug it when it's not in use.
Thanks.

System prefs> sound> output.
select your internal speakers in there.
No need to unplug your mini amp.
This actually works on your Mac? I doubt it. This does not work on either the Early '06 iMac, nor the Early '09 Mac mini in my house. When anything analog is plugged into the audio-out port, the name of the device in Sys Prefs/Sound/Output simply changes from Internal Speakers to Headphones, there is no option for one or the other.
This has been asked over and over here, and I know of no way to do what the OP has asked.
Dah•veed

Is it possible to connect a mac book pro via thunderbolt and a dvi switchbox (multiple computers) to a thunderbolt display?

Hi,
I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
-ais-swiss

ais-swiss wrote:
How to connect windows laptop (vga) to thunderbolt display?
AHHH??!!!!!! Was that your original question?? I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display. If THAT is what you're trying to do, then NO.... You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
I wonder why apple doesn't state this in their technical descriptions...?
-ais-swiss
Actually, the state that information all over the Tech Specs on the Apple Store website.
http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
Here are two different statements from that webpage:
So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.

Switching between the firewire connection and USB 2.0 Connection

Is it possible to switch between the firewire connection and USB 2.0 Connection on a portable external hard drive? I've tried unsuccessfully to use the firewire connection on my external hard drive after using the 2.0 connection. No machine will read the drive if it is connected via the firewire port. Using USB 2.0 it works as intended.

Hello Grizzly Marmot,
Thank you for the feedback. So probably my old MAXTOR enclosure is playing me tricks ....
Last night the backup on my USB 2.0 was terribly slow ??? The incremental duplication of my hard drive (372.9 MB of data from 35GB of complete data) gave me these stats:
Copied : 6232 files, 372,9 Mo
Average : 8,8 Mo/minute (4,5 copying, 148,1 verifiying)
Just to analyse the drive it takes ±45 minutes ??? Also could the energy saving mode be a slow down factor (the suspension of the computer is NEVER) ???
I still wonder what speed I could experience for a wireless backup to a NAS drive ??
Thanks for helping.
Robert

I am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

i am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

Chamar wrote:
I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty. It is probably in the small print. I certainly would not risk it for an expensive Apple product.
Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off. However, Apple does not make life easy for you.
However, if you are going for a 'used' machine it is probably worth a try.
Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed.

Switching BW authorization concept back and forth on the fly

After upgrading to BW 7.0, we are currently developing the BW authorizations from scratch with the new analytical authorizations. The system is currently set to the legacy RSR authorization objects. The idea is now to define two timeframes on our development system, one for the users working with old authorizations, and a second timeframe for testing the new analytical authorizations.
Can we switch the authorization concept back and forth on the fly, or are there any obstacles?
Thanks in advance!

Andreas,
The latest version of BW is 7.3 which is also Analysis authorization concept like 7.0. So please clarify from the system status what level are you upgrading to.
Under 7.0, the RSR objects were still available i.e. you can switch the concept back and forth on the fly, it will trigger a transport. AFAIK - In 7.3 however there is no support for RSR anymore in fact even the object class is not visible and so does the switch for the concept and even RSR objects (Z-objects) do not show up in PFCG either.
So if you are moving to 7.0 switch is possible, 7.3 it is not. But in either case, you should be upgrading using a dual landscape with upgrade work being done & tested in separate boxes than daily production support landscape. It will come in handy at the time of testing also.
Regards,
Shivraj Singh

Switched from DSL to cable and now can't find apple tv in itunesdevice list

I just switched from DSL to Cable and now for whatever reason I cannot find my apple tv in the itunes device list on my desktop computer. If I use another laptop through the same wireless router I can see the apple tv no problem. My apple tv can see my wireless router and connect to the internet and watch youtube/trailers/etc.
I have tried restoring the apple tv, and have also tried uninstalling and reinstalling the itunes on the desktop. I also reset the wireless router...none of the above seem to work. any suggestions would be greatly appreciated as this has been crazy frustrating...thanks in advance.

If you have an AirPort Extreme or a Time Capsule, you need to use the AirPort utility to access it. Otherwise, your router has a control panel that you can access by entering the router's IP address into your web browser. You'll have to check your router's documentation for the default login name and password, but it's often admin admin or root root (which is why you should at least change the password as soon as possible).

Possible to S/W switch btwn 2.1 speakers and headphones with Audigy

Similar Messages

Maybe you are looking for