Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

Hi;
No, there isn't a way for you to see anything about who has saved progress.
Thanks,
Josh

Similar Messages

  • Is it possible to see how many hours an iMac has been "running"?

    Is it possible to see how many hours an iMac has been "running"?

    From the Finder, click the Apple logo at top left, choose About This Mac and then from the window that opens choose System Report.
    Scroll down to the Software heading and in the System Siftware overview, you'll see Time since boot.

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Is it possible to see my phone numbers and addresses that I backed up in the blackberry desktop manager

    I know it may be a silly question -- but I finally was able to download the blackberry desktop manager and then back up all the data from my blackberry to my computer via the desktop manager.  For my peace of mind, I would like to see some of this data (addresses and phone numbers) just to insure that I did the back up correctly.  Is this possible?
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    The file that contains the backup data is designed as proprietery to the Backup/Restore process. It is not designed to be read independently. There are some third party readers, can't recall the names (Amber-something-or-other?), but if you search for an application that can read an IPD file, you might find what you are looking for.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is it possible to see how many times a component has been used in our websites?

    Hi,
    we currently have 3 websites running and I don't know if a component we created is actually in use.
    Is there a way to find this out?
    Thanks,
    Giulio

    Hi kasq,
    thanks for your quick answer...I tried
    path=/apps/mywebsite/components/scrollable/html.jsp
    and the result was
    XPath query
    /jcr:root/apps/upc-cablecom-ch/components/scrollable/html.jsp//*
    Filtering predicates
    Results
    Number of hits: 1
    Time: 0.16 seconds
    /apps/mywebsite/components/scrollable/html.jsp/jcr:content  (html,  json)
    So how do I have to read it? I see 1 number of hits, that I assume it's how many times it's used from other files...but how do I actually see how many times it's used on all our pages?
    Sorry for this newbie question, but only now I'm getting deeper in CQ5
    Thanks,
    G

  • Is it possible to see which devices have been synced to a mac without connecting the device to the mac

    I would like to find my phone's serial number, and i cannot connect my iphone to my computer. Therefore, i would like to know if i can view my phone's serial number without connecting it.
    (it has been stolen)

    If you still have your receipt, the serial number could be on there.  If you registered your iPhone, call Apple Customer relations.  They should be able to help you.  
    You should also post in the iPhone forum area. 

  • My ipod 2g says I am connected to wifi but when I go to the home I see no wifi bars and it will not let me use the internet, My ipod 2g says I am connected to wifi but when I go to the home I see no wifi bars and it will not let me use the internet

    Plzzzzz help

    Does the iPod connect to other networks?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I can't see anything to confirm that I'm not a robot! The box is empty.

    I'm using FF 3.6.8 on a Mac with OS 10.6.4. I can't see any words in the box where I'm supposed to confirm that I'm not a robot, so I can't start Firefox Sync. What settings may be wrong?

    Hello all, I have the answer.
    You need ADOBE SHOCKWAVE. I had the exact same issue, tried some stuff to no avail. This morning it occurred to me that one more plugin was missing. After installing Adobe Shockwave I am able to see the catchpha.
    Running: Windows 7 64-bit
    --Boss of the Interwebz out--

  • Has anyone updated an app via the store only to have the app stay in Update Available status?

    Uupdated the app called ChordProBuddy and the update remains in the ready to update status on my App Store Dock Icon and in the update  window of the App Store. It will not go away after the download is completed.
    Any Suggestions?
    RL

    Thanks for the fast reply. I have done a restart and deleted the app. That resulted in not having the app and still having the problem. The vendor support was great. He sent  me another app and I installed it and the app is now working but the "update " just stays there.

  • Is it possible to see DML generated by Applying the LCR?

    We've got a fairly strange situation happening at one of our client sites. Our system includes triggers on the target/replica tables, to track changes for incremental refresh purposes. Been working great (mostly) for years with Streams. However, recently some logic was added to the triggers to NOT record changes if a specific column on the table is being UPDATEd (due to aa source application change), so in the UPDATE section of the trigger, the UPDATING('<COLUMN_NAME'>) function is used to determine if that column is actually being updated or not. THis works because in the source application, this column ONLY evre gets updated during one single process that we DO actually want to ignore. Again, this logic worked great internally as well at almost all client sites. However, at one client, this logic is NOT working, which is leading to the theory that for some reason, when applying the actual LCR to the table, STreams is firing off an UPDATE statement that is updating ALL columns, regardless of whether the values changed or not. Whereas in most situations, the evidence suggests that Streams only puts those columns in the SET clause of the UDPATE statement that are in fact different/changed.
    So - this then begs the question: is there some way to "see" the UPDATE statement generated by Streams when applying the LCR? We've been able to look at the actual LCR contents (all the OLD and NEW values) and so can see that this value is in fact, NOT changing. Yet the UPDATING logic in the trigger seems to indicate that it is still being included in the SET clause for some reason...
    Have tried adding logic to the trigger itself to look at v$SQL, etc to see the actual UDPATE statement but that doesn't seem to be working. Any other tips for debuging this one?
    This is 11.2.0.2 - alternatively: any known Streams bugs w/ this release that we need to look for patches for that might address this?
    Thanks for any/all ideas.
    Cheers,
    Jim

    Yes you can see the DML executed by the apply servers. This is documented here:
    http://docs.oracle.com/cd/E11882_01/server.112/e17069/strms_trapply.htm#STRMS1062
    Regards,

  • I am updating os to 10.7.2 and it has stalled at 297.9mb for the last 20 mins, any suggestions?

    I am updating os to 10.7.2 and it has stalled at 297.9mb for the last 20 mins, any suggestions?

    Do you have a firewall operating that sets any kind of limits on downloads?
    You might try a restart of the Mac to see if something there is interfering, though not likely that is the issue.
    Have you tried the download at a different time of day when the internet is less busy?
    Others on here have had questions about slow servers and Apple opening Match up to something like 19 countries today...perhaps that has something to do with it...too much system load.

  • When I try to import, I receive the following message: "An internal error has occurred: not enough memory".  I always download my photos onto an external hard drive.

    Yesterday,I downloaded an update for Lightroom 5.  Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory".  The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
    - I always download my photos onto an external hard drive.It is about 10 % full.
    - It says I have Lightroom 5.6  64 bit
    - I am working from a newer laptop (Windows).  The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
    - I have edited 2794 photos in Lightroom and it is all in one catalog.
    - I did not have this problem until I made the update.  I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
    If there is more info. needed, let me know.  I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
    Sincerely,
    Adrianne

    Not Enough Memory typically refers to RAM.  How much RAM do you have on your 64-bit OS computer?  Do you have other programs running that may be using most of the memory?

  • Is it possible to see who has saved progress on a web form, but not submitted?

    We are using FormsCentral for our application process, and we are allowing applicants to save forms. Is it possible to see who has started a web form, and saved it, but hasn't submitted yet? Maybe by cc'ing the email notificiation they get to an admin?
    We'd like to see who is working on the applications, and also to send them a reminder that they need to complete and submit the form by the deadline.

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

  • Sharing a PDF without users seeing who else has access?

    Was wondering if there was a way to sharing a PDF without users seeing who else has access?

    Sorry, not using Acrobat.com. It is possible using the Adobe Acrobat.

  • Who has loaded iOS 4.3 on the 3Gs

    Who has upgrade to iOS 4.3? Who is your phone? Is is sluggish or quicker? I'm going to wait and see what everyone else has to say before I upgrade. When I had the iphone 3G I did the mistake up grading to iOS4 and it made my phone at the time sluggish. Now that I have the 3Gs I'm going to wait a see.

    That would be the plan, since he still has a few months left on his warranty. The unfortunate thing though, is like me, he uses his phone for work, and absolutely cannot go without it. So to have it sent of to Apple for them to look at for the next 4-6 weeks is not possible. Unless Apple is willing to give him a loaner phone, which they said they couldn't. Damned if you do, damned if you don't.
    Ever since the 4.0 update fiasco, I've just been following the threads here regarding all the updates. Because there were enough complaints and issues with them, I never bothered to update from 4.0. That is until my last 3GS, Apple said they'd upgrade me to the iP4. But before I said yes, I told them I would update my 3GS (from scratch) to 4.1 to see if it fixed anything. Like the previous 2, it didn't help. Apple sent me an iP4 with 4.1 installed. Except for the intermittent wifi issues, all other issues I had with my previous iPhones are gone. The wifi issue is, even at full bars, I get the message "you need to be connected to the internet" every so often. Or with full bars, it would switch to 3G then back, then back to 3G again. There are also times when in wifi settings my network would be checked off (indicating you are connected to a wireless network), but it's still says 3G at the top. I would have to switch wifi on and off several times before it finally stayed on wifi. But that's a small compared my previous fast battery drain doing nothing, rebooting randomly, and emails that loaded automatically even though I didn't launch Mail and Push Email is set to off. Except for the jailbreaking workarounds, I did pretty much all the suggestions in these boards with no luck. Hence, why I'm very apprehensive about updating to 4.3 at the moment. Still waiting on more people chiming in.
    I'm curious to see how many people who weren't having issues under 4.2.1, haven't run into any issues when updating to 4.3. Or those that were having issues under 4.2.1, no longer have them under 4.3. Right now, I'm still seeing posts of people having reboot and battery issues in previous iOS's, still having them under 4.3. Even after a fresh install.

Maybe you are looking for

  • Using if statement in cursor problem

    Hi, I am getting problem in cursor in plsql. i'e     DECLARE     CURSOR curRec IS           if condition then                select query1;           else                select query2;           end if;       c1rec curRec%ROWTYPE; Pls.. help.

  • F.01 Financial Statement

    Hi, When i run my report F.01 with Tree Control selected then it drills down till business area. The client wants to see this till Account. Is there any standard way or modification to do. Help required. Thanks

  • ORA-01116 - I've deleted a dbf file

    Hi, I tried to shutdown immediate the server. This is hanging. Can someone help? thx

  • Error message GP626

    Hi All, Version 0 is not activated in our system from fiscal year 2011. We want to post a recurring entry for certain future expenses. But we are getting following error message, Message No: GP626. Version 0 is not defined in controlling area XXXX fo

  • Problems with sounddrivers

    Hello, Today I installed KDE insteed of xfce4. I wanted to use amarok. Great mediaplayer. But my sound did work perfectly... but when I was listening to some music with amarok I got a error that says: "Xine was unable to intialize any audiodrivers"..