Possible to split a cell? numbers v3.1

Is it possible to split a cell in Numbers 3.1? Thank you for your help.

NO, there is no split cell function.  You can do what you want, which I think is you want one row to have a column that is split, like this:
To do this:
create a table with two rows:
Now select two adjacent cells in the same row and merge them:
Now select the first row and duplicate by using the <option> + <up arrow> key combination:
To add rows below the row with the merged cells, select the row with the merged cell, then copy
now select a row that is earlier and paste,
you can delete the row with the merged cell at the end
or you can select a row without a merged cell, copy, then paste over one that has a merged cell.
WARNING: you should know that all kinds of undesireable things happen with merged cells.

Similar Messages

  • Can I split a cell in Numbers in Ipad?

    Can I split a cell in Numbers in Ipad?

    I have Office:Mac 2011, too. if it's possible in that, please let me know. I was able to link cells from Excel in Word, but each cell would start a new paragraph/line rather than go in a series.

  • How is it possible to split the table cells in Pages, Version 5.1

    How is it possible to split the table cells in Pages, Version 5.1?

    This is a feature removed in the change from Pages 09 to Pages 5.0.1.
    If you need this facility, revert to Pages 09.  If you upgraded to 5.0.1, then the earlier version is still in your Applications folder in a folder called iWork.

  • Is splitting a cell now gone???

    Such a basic function. There appears to be absolutely no way to split a cell in the new iWork.

    such a basic function and an easy function to keep.
    As far as I can tell, as Jerry points out, splitting and merging are recipe for trouble, even on Numbers 2.3. Sorting and filtering can become a nightmare.
    Since there are other ways to achieve the same display effect as splitting and merging, I'm happy to see that splitting, at least, is gone.
    I'd rather have sorting work right, which perhaps is an even more basic spreadsheet function.
    SG

  • Subsequent outbound delivery split with serial numbers

    Hi,
    I have a question about subsequent outbound delivery split with already assigned serial numbers.
    Case:
    First delivery is created and serial numbers are assigned. Now we have to do a subsequent delivery split for that delivery. In SAP standard, it's not possible to do a subsequent delivery split if serial numbers are already assigned.
    Does anyone know how we can handle this?
    Best Regards,
    Florian

    well, seems to be not possible at all.

  • Export splits 1 cell into several

    hi
    I would like to export the results of the query:
    select * from user_views;
    when i run the query, the result looks ok, i.e. each row is separate
    when i export this , the content of the views gets splitted into different rows;
    how can i export so the content of each cell stays in 1 cell?
    is this possible?
    thanks in advance for any tips!
    rdgs

    hi
    thanks for your answer; however this format still splits the cell into many rows;
    however i tried one by one every single format in this export and the following one keeps the data in 1 cell:
    html
    my version: 3.0.0.4
    so my issue is solved;
    rgds

  • Is it possible to reference one cell from the value of another?

    Is it possible to reference one cell from the value of another e.g.
    value of b1 = value of c(value of a1)
    So if a1 = 3 then b1 = c3, if a1 = 5 then b1 = c5.

    Excellent!
    Thanks Wayne. Just saved me many hours and a headache.
    Works like a dream.
    Thank you for your succinct (and accurate) answer.
    Mark

  • Splitting a Cell

    Hi... I'd like to split a cell after a designated amount of characters but dont want it to break a word.
    So for instance if cell A1 contained:
    Put these events in order of occurrence, starting with the earliest.
    But I want to split it to lines with a maximum character length of 32 (but dont want a word to break at the end of the line), if I insert =LEFT(A1,32) then I get
    Put these events in order of occ
    Is there any way to check for the space before the word at which the line break occurs or am I screwed?
    Thanks for any help!

    This may work better:
    Type your string in A1
    A2=LEFT(D2, 32-C2)
    B2 contains 1
    C2=IFERROR(MATCH(" ", E2:AH2, 0), 0)
    D2=MID($A$1, SUM($B$2:B2)+1, 32)
    E2=IFERROR(MID($D2, LEN($D2)-(COLUMN()-5), 1), "")
    select E2 and fill to the right through AJ2
    now select C2 through AJ2 and fill down as needed
    B3=LEN(A2)+1
    select B3 and fill down
    now select A2 and fill down
    A2 through A4 will contain the broekn up string

  • Is there any way of making the "cell numbers" smaller on a lightroom web gallery?

    I am new to lightroom having used aperture 3 in the past.
    I am currently trying to create a html web gallery in order to put up some images online for a client. I am really happy with the flexibility of the lightroom galleries.
    However, the cell numbering on the grid pages are very large and the larger the number, the more of the number hides behind the image. I have been searching for a remedy to this problem as there doesn't seem to be any point in having a contact sheet for a client if they can't see what number an image is.
    I have attached a screenshot to illustrate.
    Has anyone else had this problem? Would really appreciate any thoughts.
    Thanks!
    Jack

    Well, you could probably hack the template file itself. I've never done it, but others have restyled markup in a variety of ways.

  • Possible to split one large pdf into multiple pages (in the same pdf?)

    I have some well logs that have been scanned - problem is they're coming is as one loooong page in the pdf.  Is it possible to split it up into several 8.5 x 11 pages within Acrobat, or do I need special software?

    Depends on what you have and the amount of length (a time issue). The simplest way is to use the crop tool to get a page worth and save it, then repeat for the next page, etc. Once all the pages are saved, you can put them back together. You should then use redax or such (print to a new PDF in a pinch) to remove the cropped portions. As I said, this is a bit time consuming, but can do the job. There are likely quicker ways and possibly some 3 party products that can do the job also.

  • Adjusting Column After Splitting a Cell

    Hello,
    I am new with Pages and am amazingly impressed with all that it does. Perhaps I am pushiing it a bit too far but when I split a cell into two cells I am not able to adjust the size of any of the two cells. Is this normal?
    Thanks in advance.
    Farzad

    Thanks. Here is what I have done:
    I created an ordinary table and then merged two cells of two columns together for formatting purposes. Down the road I decided I didn't want them merged and so I splitted that merged cell into two cells, and it worked. It is these two new cells that I cannot resize.
    I can't attach the file so I am attaching a snapshot of it to this message.
    Thanks for the replies.
    Farzad

  • Is it possible to stop using Manual Numbering ?

    Is it possible to stop using Manual Numbering of any Document for any type of user?
    in SAP B1 2007 B SP0 PL7

    Is your question related to Reporting & Printing?  You'd better post it on the main forum to get more response.
    Thanks,
    Gordon

  • Is it possible to split invoice Item category wise?

    Is it possible to split invoice Item category wise

    In trx VTFA (if your billing is sales order based) choose your billing type and SO type, there select your item categories and there select the field VBRK/VBRP data. In that field you will see the currently used routine. With the help of your ABAP guy create a copy of that routine under a different number and add your lines of code. Let's say you use routine 001. 
    FORM DATEN_KOPIEREN_001.
    Header data
    VBRK-xxxxx = ............
    Item data
    VBRP-xxxxx = ............
    Additional split criteria
    DATA: BEGIN OF ZUK,
    MODUL(3) VALUE '001',
    VTWEG LIKE VBAK-VTWEG,
    SPART LIKE VBAK-SPART,
    END OF ZUK.
    ZUK-SPART = VBAK-SPART.
    ZUK-VTWEG = VBAK-VTWEG.
    VBRK-ZUKRI = ZUK.
    ENDFORM.
    This is how it should look after modification:
    Header data
    VBRK-xxxxx = ............
    Item data
    VBRP-xxxxx = ............
    Additional split criteria
    DATA: BEGIN OF ZUK,
    MODUL(3) VALUE '001',
    VTWEG LIKE VBAK-VTWEG,
    SPART LIKE VBAK-SPART,
    PSTYV LIKE VBAP-PSTYV,    <- New line
    END OF ZUK.
    ZUK-SPART = VBAK-SPART.
    ZUK-VTWEG = VBAK-VTWEG.
    ZUK-PSTYV = VBAP-PSTYV.   <- New line
    VBRK-ZUKRI = ZUK.
    ENDFORM.
    After this routine is created and activated place it as the default copy control routine instead of the old ones

  • SPLIT the cell in either template or table horizontally

    Hi ,
               Hope you all doing well,
               Can any  body let me know how to split the cell in eithe template or table horizontally,
    what i mean to say in detail is that i have created three cells using two lines  types, which it gave be 3 boxes , now i want to split only third box alone in to two parts with an horizantal line not by vertical line.
    *Please note note , i dont want to split the cell vertically , i want to split it to horizontally.*
    can any body help .
    Thanks and regards,
    SADIQ ALI SHAIK,
    9966408168

    Hi,
    Better to use 2 Templates.
    Eg :
    Total Width -
    120 MM.
    Then Create first template with following measurements.
    Width                         80      CM
    Horizontal Alignment   left   0.50   MM
    Vertical Alignment
    Here u can mention Height width of the cells
    Next create another template.
    Width                         40      CM
    Horizontal Alignment   left  85   MM
    Vertical Alignment
    here also u can mention the height and width for two line types.(this for split the box horizontally)

  • Syndicator Server: possible to split the export file in multiple file?

    Hello,
    is it possible to split the export files into multiple files e. g. at 5000 records?
    Perhaps there is a possibility in the mdss.ini? Or a setting in the mapping?
    Thank your for your responses!
    Melanie

    Hi Melanie,
    - If you are syndicating in the Xml format you have the option to syndicate one xml for every record. or multiple records one xml.
    For this you have to make a simple setting in the Syndicator-> Map properties->XML file output->(multiple files/single file)
    Other way around is:
    - If you are syndiacting in any other format say text then the output file goes as one file for all records present in the MDM repository, for this you can use the search options.
    - Create a search on some field value which will select a set of records from the lot.
    - Then you can syndicate only those records which satisfies the  search criteria.
    - In this way it is possible to syndicate in parts
    Hope It Helped,
    Kindly Reward Points if found useful
    Thanks & Regards
    Simona Pinto

Maybe you are looking for

  • Cannot install Flash Builder on a network home drive

    When trying to install in our corporate environment we have network home drives and the Flash Builder installer for some reason tries to create a directory here: \\escfil02\homedir\deancj\..\Adobe Flash Builder 4 We noone here has permission to creat

  • Ipod v2.3 not being recognised by itunes

    when I plug my ipod in itunes will not recognise it, then it opens up a window called autorun with a torch searching for something. Nothing ever gets found and my device manager recognises it as an ipod device. I have done the 5rs on the support page

  • Not auto detecting wifi out of clamshell mode

    I have a MacBook Air and when opening my laptop out of clamshell mode my wifi will not auto detect the closest connection point. The current work around is to right click and select the appropriate connection. While this is ok, I would really like th

  • Developing Reverse Engineering Program -- JAVA to UML what needed

    Hi there, I am wondering why people want to develop reverse engineering?? it is useful? but developing the reverse Engineering sound interesting for me. Anyway I just intend to figure out how to develop a reverse Engineering program FROM java to UML

  • Which code could lock the screen in my apps?

    I'm new in Xcode. In my magic app,I want to lock and immediately unlock the screen,how to do the action? Example code would be helpful. Thanks.