Possible to start multiple saplogon's ??
Hi
I would like to start 2 different saplogons, using .SAL files im pointing each shortcut to a different saplogon.ini. However saplogon.exe dosent allow for multiple instances running it seems ... is there a switch to allow for a second running saplogon.exe ??
Each shortcut works fine, however when one saplogon is running, trying to start the next one, in order to have 2 saplogon's running side by side, nothing happens.
Hi,
We are using SAPGUI 6.40 with citrix. We two to confiure two saplogon pad's on the citrix server. Pointing one Logon pad to one group of users and other logon pad to other group of users.
Please let me know how to use the parameter "/ini_file=" parameter for saplogon.EXE so as to have two logon pads.
Thanks,
Tanuj
Similar Messages
-
Is it possible to Start a SFC in multiple resouces?
Dears,
Is it possible to Start a SFC in multiple resouces?
ex: SFC01 qty=100
Start SFC01 in below resources at the same time,
Resource01 qty=10
Resource02 qty=20
Resource03 qty=70
so that user can calcute the resource utilization.
Thanks!HI,
What did you mean Simultaneous Operations?
I mean I can start a SFC at multiple resources in the same operation.
SFC01 resource01 qty=10 operation01
SFC01 resource02 qty=20 operation01
SAPME did not display any result message, but I can only see the active sfc in first start resource.
Thanks! -
Is it possible to maintain multiple payment formats with a single Program
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer Snazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3 -
Is it possible to maintain multiple pymt frmts with in a single prgm 11i
Hi,
Is it possible to maintain multiple payment formats with in a single program in 11i
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer Snazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3 -
CHaRM-Is that possible to create multiple Transport Request in UC
HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
AvaHi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type StatProf UserStatus Seq Action in SAP Change Manager
SDHF SDHFHEAD E0002 10 CREATE_HF
SDHF SDHFHEAD E0002 20 CREATE_REQ
SDHF SDHFHEAD E0002 30 SAVE_PARTNER
SDHF SDHFHEAD E0002 40 SET BO LINKS
Where SDHF - Ur.gent Correction
E0002 - In Development
CREATE_HF - Create an Instance in SAP Change Manager
CREATE_REQ - Create Transport Request with Task
SAVE_PARTNER - Save Partners in Respective Partner Roles
SET BO LINKS - Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava -
Possible to have multiple cluster members in the same JVM (for unit tests)?
Hi,
I'm wondering if it's possible to simulate multiple cluster members inside of a single JVM. I'm looking to unit test my code and it would be great to write cases for various boundary conditions.
This could certainly be done with multiple JVMs but would be more difficult to run in something like cruise control etc.
TIA,
DannyHi Danny,
I do not know how to accomplish what you are asking for and run several Coherence nodes in a single JVM, but I have written a JUnit base class that starts a configurable number of nodes (each in its own JVM) and provides some other useful methods for unit/integration testing with Coherence, such as method to clear all caches or to load test data from the CSV file.
It is still a work in progress and you might need to tweak things a bit to make it work in your environment, but it will at least give you a head start.
Shoot me an email if you are interested and I'll send it to you (you can find my email in my profile).
Regards,
Aleks -
Is it possible to select multiple clips and create a sequence from each individually?
Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?
So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-) -
Hi !!!
Can any one please give me procedure to start multiple
meetings with single flash file using flash media server
components.
Let me explain clearly----
I started a meeting with flash media server components and
deployed to tomacat. I can able to run the application and other
users are also able to join to my meeting.
But, I need to have multiple meeting sessions for different
users and user must join to my meeting if he is having my meeting
key.
Is this possible with Flash Media Server Components?? If yes
pleaese explain me
Thanks in Advacne
Anil GollaHi Sam,
I don't think it's a good idea for one script to start multiple app servers. I think you want to reduce some manual work? But running the SAP standard script 'startsap' twice is not that complex. In other words, you make the simple thing complicated....
Why the one-step run script is not recommended? Because you must ensure that the central instance is started successfully once after you run the script startsap. Even you have a command in the script to detect this, it cannot be 100% garanteed that the CI is started without any errors. In other hand, the command to detect CI status is not 100% stable. You cannot easily control it when it meets error.
The best way is you monitor it yourself.
Regards -
Is it possible to have multiple pause the require view to click "continue" button to proceed?
Is it possible to have multiple pauses the require view to click "continue" button to proceed?
1. Turn the video into a symbol.
2. Set stage, symbol and video to not autoplay.
3. Set play in the video playback at the start of the video timeline.
4. Set pause in the video playback at the prefered time on symbol timeline.
Once I convert it to a symbol , the pause funtion is not showing on playback.
5. Zoom in as much as you can on symbol timeline and set trigger "stop all" for the symbol right after the pause playback marking.
6. Set play in the video playback right after the "stop all trigger" marking.
7. Create button with action play symbol.
You can now play a video which will stop at a pre set pause, and make it countinue to run by clicking the play button again. -
Is it possible to have Multiple Spool requests in one batch job overview?
Hi,
While running one of my z program in back ground, there are two spools generated (one by write statement and one by OPEN_FORM statement and both the spools are available in SP01 Transaction), but when i see the job overview in transaction SM37, I only see one spool request (that of the last spool request). Can any body in the group please tell me is it possible to see multiple spool requests in the job overview of one Abap program and if yes, how?
Thank you.
AbinashHi Jayanthi,
Thank you for the link. But probably that discussion was also an unsolved one.
Anyway, does any one in the group think that display of multiple spools per one step job is dependent on client / SAP Server setting? Because as evident from the chain of mails in the link provided by Jayanthi, some people say that they see multiple spool requests for one program in batch mode job overview (SM37)? If yes, can some body tell me the required configuration? -
NOT POSSIBLE TO START ESSBASE WHEN SSO INITIALIZATION FAILS
Version is 11.1.1.3. My Essbase is not starting. Issues from the logs and what I have attempted are as follows. I have highlighted the relevant areas in bold.
When Starting Essbase from products/Essbase/bin/start.bat:
C:\Hyperion\products\Essbase\bin>start.bat
C:\Hyperion\products\Essbase\bin>REM eis
C:\Hyperion\products\Essbase\bin>net start "Hyperion Integration Services"
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM APS
C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\aps\bin\start.bat
C:\Hyperion\products\Essbase\bin>REM aps
C:\Hyperion\products\Essbase\bin>net start HyS9aps
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM EAS
C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\eas\bin\start.bat
C:\Hyperion\products\Essbase\bin>REM eas
C:\Hyperion\products\Essbase\bin>net start HyS9eas
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM EssbaseAgent
C:\Hyperion\products\Essbase\bin>net start hypservice_1
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
C:\Hyperion\products\Essbase\bin>REM EssbaseStudio
C:\Hyperion\products\Essbase\bin>C:\Hyperion\products\Essbase\EssbaseStudio\Server\startServer.bat
C:\Hyperion\products\Essbase\bin>setlocal
C:\Hyperion\products\Essbase\bin>set CONFIGTOOL_HOME="C:\Hyperion\common\config\9.5.0.0"
C:\Hyperion\products\Essbase\bin>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
Logging configuration file is not found. Expected filename is C:\Hyperion\products\Essbase\bin\.\server.properties
Log file location is:
C:\Hyperion\logs\esbstudio\server.log
13:23:09 11/01/11 INFO Starting up
13:23:09 11/01/11 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Bui
ld 090, June 25 2009
13:23:16 11/01/11 (system) WARNING Failed to load driver for sap
13:23:16 11/01/11 (system) SEVERE Cannot load Teradata connector
13:23:16 11/01/11 (system) WARNING Failed to load driver for teradata
13:23:16 11/01/11 (system) WARNING Failed to load driver for mysql
13:23:16 11/01/11 (system) WARNING Failed to load driver for netezza
Essbase.log:
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051198)
Single Sign-On Initialization Failed !
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051527)
In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
AND
C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-10-25 11:26:11,039 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-10-25 11:26:11,039 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-10-25 11:26:11,085 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-10-25 11:26:31,023 ERROR [main] 20:1092:Failed to initialize EPM System registry. *[Root Cause: java.sql.SQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-10-25 11:26:31,023 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\,* com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-10-25 11:26:31,023 INFO [main] CSS system intialization failed. : [21484 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
What I have attempted:
- Attempted to connect to Shared Services, Workspace url's - YES
- Checked openLDAP & my Database is running - YES
- Added following to Configuration File :
SharedServicesLocation machinex 28080
AUTHENTICATIONMODULE CSS http://machinex:28080/interop/framework/getCSSConfigFile YES, but same error
- Changed essbase.bak to essbase.sec YES but same error
- netstat -an to check for 1423. Port 1423 is not listening, although ALL TCP Ports have been enabled. So YES but same error.
- Read Knowledgebase article # 954322.1 - the suggested things in there don't seem to apply to my case, unless I am missing something.
At this point does anybody have any suggestions ?An update: Just for kicks, I tried restarting Essbase using Start->Programs-EPMSystem->Essbase->EssbaseServer->Essbase.bat and apparently now Essbase is started.
EAS, Studio and Planning however are down.
Excerpt from the HyS9eas-sysout.log:
[ERROR] RegistryUtils - SQL Exception when trying to create a new connection [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect
* CRITICAL ERROR: Common Security Services initialization failed. Please *
* make sure that a valid entry is provided for SECURITY_CONFIGURATION in *
* OlapAdmin.properties. This is required if Shared Services is enabled. *
* Please restart the server after the changes. *
Stopping DAO factory!
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
java.lang.ExceptionInInitializerError
.... bunch of java code.
This is really strange. There is NOTHING that I changed, started or stopped which could have caused Essbase to start magically all of a sudden.
Any insights into the cause of all this ? -
Start multiple domains simultaneously on 1 Weblogic server installation?
Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan -
I guess this is more like a new feature in Firefox. I work at home and would like to separate work related bookmarks in a separate bookmarks file which is as easily available like a standard bookmarks tab. I propose a possibility to add multiple bookmarks tabs in the menu bar. It would be nice if those tabs could be renamed at will...
You can organize them in a few main folders (Home, Work, etc.) to make it easier to distinguish the bookmarks.
You can also export the Bookmarks to an HTML file and make copies of that file with the needed bookmarks.<br />
You can open such a HTML file in a Firefox tab and middle-click a link to open that link in a new tab. -
Is it possible to disable multiple logins?
Is it possible to disable multiple logins by the same user on different computers? I have network hosted user accounts. I need a way to NOT make it possible for user A to go to client Mac A, login and leave himself logged in there then go to client Mac B and login there also. This is creating some unpleasant effects on the server - naturally!
Any easy way to accomplish this? Perhaps through Profile Manager?
Thanks!Simon,
Thanks for the reply but I need some elaboration.... "the "Login" preferences for users and groups".... what exactly are we referring to? I don't see such option (or atleast the way it's written), in either Server app or Profile Manager. Are we talking about the same OS X version?
Thanks.
P.S. Despite the fact that I have enabled the option in Profile Manager to logout all users on all computers after 30 minutes of inactivity, I have noticed that the iMac clients don't log out the users after the said time... -
Is it possible to insert multiples markings in a DateNavigator ?
Hi Experts !
I'm currently creating a DateNavigator, and the person for who I works would like to have 5 differents markings in one DateNavigator.
But in the Outline view, I have already one marking in the DateNavigator, and I can't add another with a right click on the DateNavigator...
So I ask myself if it is possible to have multiples marking in just one DateNavigator...
Please : Do you know if it possible ? And if yes, do you know how to do this ?
Thank you for advance,
LouisHi Fazal, thank you for your answer .
I therefore have two problems : it is written everywhere to take a WDTableCellDesign, but when I do this, I can't bind the context, because the Marking UI element says it inly accept "TableCellDesign" (but no WDtableCellDesign". So I don't know what type I should give to the Category attribute I created to stock which semantic I want.
In an other way, I go into the code, and I add a line in the date creation code, which is, in the end :
Calendar cal1 = Calendar.getInstance();
cal1.set(Calendar.YEAR,2009);
cal1.set(Calendar.DAY_OF_MONTH,22);
cal1.set(Calendar.MONTH,11);
ITestElement element1 = wdContext.nodeTest().createTestElement();
Date sqlDate1 = new Date(cal1.getTimeInMillis());
element1.setDate(sqlDate1);
element1.setTextMessage("Vacances annuelles");
element1.setCategory(Calendar_Red);
wdContext.nodeTest().addElement(element1);
But the Calendar_Red is underlined with the error message : "Calendar_Red cannot be resolved".
If I change this line but the following : element1.setCategory("Calendar_Red");
Then in this case, this is the setCategory which is underlined, with the error message :
The method setCategory(WDTableCellDesign) in the type
IPublicZtest02CompDateNavigator.ITestElement is not applicable for the arguments (String)
So please, do you have any idea of what I could have done wrong ?
Thank you for advance,
Louis
Maybe you are looking for
-
Hello All, I have a report that was using Border (TOP only), and it looked great in live previewer. However, when I ran it in the web using DESFORMAT=PDF, it showed a box around each record instead of just the TOP line, and no border at all for DESFO
-
We have 2 WIndows 7 accounts on one pc. On the account my wife uses, she is always having problems with firefox that I never have. Recently it was shrinking fonts in emails. Now, she gets Firefox not responding on start up. Can't reset settings becau
-
Acrobat Pro 11.0.07 is crashing on Windows 8.1
I've only seen a couple memos on this crash issue, is Adobe or MS working on this? Both my Acrobat Pro and Windows 8.1 are fully updated. Acrobat is crashing have not found a work around or any memo reply on the site. Always on save as or any save wi
-
i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?
-
Scaling an object up or down doesnt seem to work anymore. I feel like the effect is random but my points dont scale correctly. there are small distortions in various instances. The distortion is random, I can scale the same object down 20 different t