Possible to sync multiple files and output the merged clips?

I'm working on a documentary project and have hundreds of individual clips from multiple Canon C-300 cameras and a multi-track master audio recording from a SoundDevices 744. Since this is a documentary the cameras aren't slating every take, instead they all have Lockit boxes generating timecode that is slaved to the master clock on the 744.
What I need to do it sync the pictures and the sound and output the sync'd files for screening and editorial. ScratchLab is not sync'ing the material properly but bringing a clip into Premiere is locked up without a problem.
Is there a way to sync the audio/video and output individual sync'd files using the tools in the CS6 suite? Please keep in mind that there are hundreds of individual clips so the process would have to be automated.
Cheers!

That is so incredible !!!!
I also have hundred of start/stop clips with TC and audio start/stop with TC too, and I don't find a way to place the clips on the timeline at the right place of the TC.... The clips are R3D and the sound comes from a 788T. Nothing special. I work a lot with Premiere and Red and I LOVE IT.
What ? I should record audio on the Red just to permit PluralEyes to do thesync from audio ??
Please Adobe team, tell me I am sleeping and when i wake up there will be a soluce !

Similar Messages

Is there a way to select multiple files and initiate the Capitalize function?

I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
Good luck...

Read from .txt file and output the content as two arrays

I am using the contoured move to control the x-y stage. The trajectory datas for x and y axis are generated using my interpolation program and it is stored in a .txt file as two columns. What I want to do is read .txt file and output the content of this file as two arrays. Is there anyone has any ideas? Thanks, the .txt file is attached.
Attachments:
R.75.txt ‏172 KB

Hi Awen,
This is quite easy to do, you can merely use the "read from spreadsheet file" function to get a 2D array (2 columns and n rows) and then use the index array function to get whatever row/colums you want..
Hope the attached VI helps you
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
read sprdsheet file.vi ‏27 KB

Is it possible to sync multiple iphoto libraries with the iPhone?

I have two libraries in iPhoto 08 but iTunes only lets me pick the default iPhoto library to sync with my iPhone. Is there a way to sync the iPhone with multiple iPhoto libraries?

You are correct. This used to work in the past although admittedly I haven't tried it for some time as it was of no direct use for my purposes.
If the goal is to see another MobileMe account's calendar(s) on your iOS device then an alternative would be to share the calendar(s) in question to yourself.
Example:
Assume you currently have MobileMe user account A on your iPhone.
Login to MM user account B with me.com which has the calendar you wish to have access to on your iPhone
Click on Calendars
Click on the Share button for the calendar you wish to see added to your iPhone.
Type in the MobileMe email address for MM user account A and set it for read & write access
Login to MM user account A on me.com
Go to calendars and accept the invitation to join the calendar you sent from MM account B
Go your iPhone (you may need to turn it on and off to make the calendars refresh ) and check your calendars, you should now have the other calendars added to your MobileMe account A's calendar
Note: You can repeat step # 3 for each of the calendars you wish to see on your iPhone.

Is it possible to sync multiple mobileme accounts onto the iphone, syncing ical calendars for these multiple mobile me accounts ?

I am trying to sync two mobileme accounts into my iphone and each account have different calendars ( all being with ical NOT CALDAV).
Now, my question is can I sync these different calendars, belonging to different mobileme accounts, into the iphone? please assist me on this matter.
Basically i want to have a work calendar to share with my colleagues and a personal calendar to share just with my friends and family.

You are correct. This used to work in the past although admittedly I haven't tried it for some time as it was of no direct use for my purposes.
If the goal is to see another MobileMe account's calendar(s) on your iOS device then an alternative would be to share the calendar(s) in question to yourself.
Example:
Assume you currently have MobileMe user account A on your iPhone.
Login to MM user account B with me.com which has the calendar you wish to have access to on your iPhone
Click on Calendars
Click on the Share button for the calendar you wish to see added to your iPhone.
Type in the MobileMe email address for MM user account A and set it for read & write access
Login to MM user account A on me.com
Go to calendars and accept the invitation to join the calendar you sent from MM account B
Go your iPhone (you may need to turn it on and off to make the calendars refresh ) and check your calendars, you should now have the other calendars added to your MobileMe account A's calendar
Note: You can repeat step # 3 for each of the calendars you wish to see on your iPhone.

Read multiple files and save all into one output file(AGAIN)

Hi, guys
I need your help for reading data from multiple files and save the results into one output file. When files are selected from file chooser, my program read the data line by line , do some calculations and save the result into the output. I made an array to store input files and it seems to be working fine, but when it comes to SaveFile() function, issues NullPointException message.
public class FileReduction1 extends JFrame implements ActionListener
 // GUI definition and layout
 /* ACTION PERFORMED */
 public void actionPerformed(ActionEvent event) {
 if (event.getActionCommand().equals("Open File")) getFileName();
 /* OPEN THE FILE */
 private void getFileName() {
 // Display file dialog so user can select file to open
 JFileChooser fileChooser = new JFileChooser();
 fileChooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
 fileChooser.setMultiSelectionEnabled(true);
 int result = fileChooser.showOpenDialog(this);
 // If cancel button selected return
 if (result == JFileChooser.CANCEL_OPTION) return;
 if (result == JFileChooser.APPROVE_OPTION)
 files = fileChooser.getSelectedFiles();
 textArea.setText("");
 if(files.length>0)
 filelist="";
 System.out.println("files length"+files.length);
 for(int i=0;i<files.length;i++)
 System.out.println(files.getName());
filelist+=files[i].getName()+" ,";
if (checkFileName(files[i]) )
openButton.setEnabled(true);
readButton.setEnabled(true);
textArea.append("file "+files[i].getName()+"is a proper file"+"\n");
readFile(files[i]);
textfield.setText(filelist);
else{JOptionPane.showMessageDialog(this,"Please select file(s)",
 "Error 5: ",JOptionPane.ERROR_MESSAGE); }
 // Obtain selected file
/* READ FILE */
private void readFile(File fileName_in) {
// Disable read button
readButton.setEnabled(false);
// Dimension data structure
 getNumberOfLines(fileName_in);
 data = new String[numLines][4];
 // Read file
 readTheFile(fileName_in);
 // Rnable open button
 openButton.setEnabled(true);
/* GET NUMBER OF LINES */
/* Get number of lines in file and prepare data structure. */
private void getNumberOfLines(File fileName_in) {
int counter = 0;
 // Open the file
 openFile(fileName_in);
 // Loop through file incrementing counter
 try {
 String line = fileInput.readLine();
 while (line != null) {
 counter++;
 System.out.println("(" + counter + ") " + line);
line = fileInput.readLine();
 numLines = counter;
closeFile(fileName_in);
 catch(IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error reading File",
 "Error 5: ",JOptionPane.ERROR_MESSAGE);
 closeFile(fileName_in);
 System.exit(1);
/* READ FILE */
private void readTheFile(File fileName_in)
// Open the file
//int row=0;
int col=0;
openFile(fileName_in);
System.out.println("Read the file");
// Loop through file incrementing counter
try
String line = fileInput.readLine();
while (line != null)
boolean containsDoubles = false;
double temp;
String[] lineParts = line.split("\t");
try
for (col=0;col<lineParts.length;col++)
temp=Double.parseDouble(lineParts[col]);
data[row][col] = lineParts[col];
containsDoubles = true;
System.out.print("data["+row+"]["+col+"]="+lineParts[col]+" ");
} catch (Exception e) {row=0; col=0; temp=0.0;}
if (containsDoubles){ row++;}
System.out.println();
line = fileInput.readLine();
catch(IOException ioException)
JOptionPane.showMessageDialog(this,"Error reading File", "Error 5: ",JOptionPane.ERROR_MESSAGE);
closeFile(fileName_in);
System.exit(1);
//System.out.println("length"+data.length);
closeFile(fileName_in);
process(fileName_in);
/* CHECK FILE NAME */
/* Return flase if selected file is a directory, access is denied or is
not a file name. */
private boolean checkFileName(File fileName_in) {
 if (fileName_in.exists()) {
 if (fileName_in.canRead()) {
 if (fileName_in.isFile()) return(true);
 else JOptionPane.showMessageDialog(null,
 "ERROR 3: File is a directory");
 else JOptionPane.showMessageDialog(null,
 "ERROR 2: Access denied");
 else JOptionPane.showMessageDialog(null,
 "ERROR 1: No such file!");
 // Return
 return(false);
/* OPEN FILE */
private void openFile(File fileName_in) {
 try {
 // Open file
 FileReader file = new FileReader(fileName_in);
 fileInput = new BufferedReader(file);
 catch(IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error Opening File",
 "Error 4: ",JOptionPane.ERROR_MESSAGE);
 textArea.append("OPEN FILE\n---------\n");
 textArea.append(fileName_in.getPath());
 textArea.append("\n");
 //System.out.println("File opened successfully");
/* CLOSE FILE */
private void closeFile(File fileName_in) {
if (fileInput != null) {
 try {
 fileInput.close();
 catch (IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error Opening File",
 "Error 4: ",JOptionPane.ERROR_MESSAGE);
System.out.println("File closed");
private void process(File fileName_in) {
//getNumberOfLines();
 //data = new String[numLines][3];
 // Read file
double temp,temp1;
 //readTheFile();
//System.out.println("row:"+row);
//int number=data.length;
//System.out.println(number);
for (int i=0; i<row; i++)
temp=Double.parseDouble(data[i][1]);
sumx+=temp;
temp1=Double.parseDouble(data[i][3]);
sumy+=temp1;
multixy+=(temp*temp1);
square_x_sum+=(temp*temp);
square_y_sum+=(temp1*temp1);
//System.out.println("Sum(x)="+sumx);
double tempup=(row*multixy)-(sumx*sumy);
double tempdown=(row*square_x_sum)-(sumx*sumx);
slope=tempup/tempdown;
double tempbup=sumy-(slope*sumx);
intb=tempbup/row;
double tempside=(row*square_y_sum)-(sumy*sumy);
double cordown=Math.sqrt(tempdown*tempside);
corr=tempup/cordown;
r_sqrt=corr*corr;
 textArea.append("Data for file"+ fileName_in.getName()+" have been processed successfully.");
 textArea.append("\n");
 textArea.append("Please enter output file name including extension.");
System.out.println("number"+row);
System.out.println("slope(m)="+slope);
System.out.println("intecept b="+intb);
System.out.println("correlation="+corr);
System.out.println("correlation="+r_sqrt);
saveFile();
private void saveFile()
textArea.append("SAVE FILE\n---------\n");
if (openFile1())
 try {
 outputToFile();
catch (IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error Writing to File",
 "Error",JOptionPane.ERROR_MESSAGE);
private boolean openFile1 ()
 // search for the file path
StringBuffer stringpath;
title=textfield1.getText().trim();
int temp=fileName_in.getName().length();
int temp_path=fileName_in.getPath().length();
int startd=(temp_path-temp);
stringpath=new StringBuffer(fileName_in.getPath());
stringpath.delete(startd, temp_path+1);
//System.out.println("file-path="+temp_path);
//System.out.println("length-file="+temp);
path=stringpath.toString();
fileName_out = new File(path, title);
//System.out.println(file_out.getName());
if (fileName_out==null || fileName_out.getName().equals(""))
 JOptionPane.showMessageDialog(this,"Invalid File name",
 "Invalid File name",JOptionPane.ERROR_MESSAGE);
 return(false);
 else
try
boolean created = fileName_out.createNewFile();
if(created)
fileOutput = new PrintWriter(new FileWriter(fileName_out));
fileOutput.println("File Name"+"\t"+"Slope(m)"+"\t"+"y-intercept(b)"+"\t"+"Coefficient(r)"+"\t"+"Correlation(R-Squared)");
return(true);
else
fileOutput = new PrintWriter(new FileWriter(fileName_out,true));
return(true);
catch (IOException exc)
JOptionPane.showMessageDialog(this,"Please enter the file name","Error",JOptionPane.ERROR_MESSAGE);
return(false);
private void outputToFile() throws IOException
// Initial output
 textArea.append("File name = " + fileName_out + "\n");
 // Test if data exists
 if (data != null)
 fileOutput.println(fileName_in.getName() +"\t"+ slope+"\t"+intb+"\t"+corr+"\t"+r_sqrt);
textArea.append("File output complete\n\n");
 else
textArea.append("No data\n\n");
 // End by closing file
initialcomp();
 fileOutput.close();
private void initialcomp()
slope=0.0;
intb=0.0;
corr=0.0;
r_sqrt=0.0;
sumx=0.0; sumy=0.0; multixy=0.0; square_x_sum=0.0; square_y_sum=0.0;
for(int i=0;i<data.length;i++)
for(int j=0;j<data[i].length;j++)
data[i][j]=null;
/* MAIN METHOD */
public static void main(String[] args) throws IOException
 // Create instance of class FileChooser
 FileReduction1 newFile = new FileReduction1("File Reduction Program");
 // Make window vissible
 newFile.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 newFile.setSize(500,400);
newFile.setVisible(true);
Sorry about the long lines.
As you can see, all input files saved in array called files, however when OpenFile1() function is called, it take input (fileName_in) as a single file not an array. I'm assuming this causes the exception.
When there's muptiple inputs, program should take each file from getFileName() to outputToFile() sequentially.
Does anybody have an idea to solve this?
Thanks a lot!!

you naming convention is confussing. you should follows Java naming convention..you have a getXXX but decalred the return type as "void"...get usully means to return something...
your code is doing too much..and hard to follows..
1. get the selected files
for each selected file
process the file and return the result
write out the result.
/** close the precious resource */
public void closeResource(Reader in){
 if (in != null){
 try{ in.close(); }
 catch (Exception e){}
/** get the total number of line in a file */
public int getLineCount(File file) throws IOException{
 BufferedReader in = null;
 int lineCount = 0;
 try{
 in = new BufferedReader(new FileReader(file));
 while ((in.readLine() != null)
 lineCount++;
 return lineCount;
 finally{ closeResource (in); }
/** read the file */
public void processFile(File inFile, File outFile) throws IOException{
 BufferedReader in = null;
 StringBuffer result = new StringBuffer();
 try{
 in = new BufferedReader(new FileReader(inFile));
 String line = null;
 while ((in.readLine() != null){
 .. do something with the line
 result.append(....);
 writeToFile(outFile, result.toString());
 finally{ closeResource (in); }
public void writeToFile(File outFile, String result) throws IOException{
 PrintWriter out = null;
 try{
 out = new PrintWriter(new FileWriter(outFile, true)); // true for appending to the end of the file
 out.println(result);
 finally{ if (out != null){ try{ out.close(); } catch (Exception e){} } }
}

Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin

Hi ,
We have a catalog that defines 2 types of products (they have too many different properties), so wanted to keep them on two different MDEX engines and serve the applications requests. Here DB catalog and front end ATG application is same for both the MDEX instances.
Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin?
Thanks
Dev

Hi, also have had some problem some monthes ago - I created separete component ProductCatalogSimpleIndexingAdminSecond. After that one of my colleage gave me some advice:
The creating separate component like ProductCatalogSimpleIndexingAdmin for the second IOC is possible way for resolving your situation. But I afraid that this way will be required creating mane duplicates for already existed components.
In my opinion the better way is the following:
starting from AssemblerApplicationConfiguration and ApplicationConfiguration component. It contains details for connecting between ATG and Endeca. Of course you should configure different components for different Endeca Apps.
After that:
Find all components that uses AssemblerApplicationConfiguration and ApplicationConfiguration. Customize these components for using one or another *Configuration component depending on what index works. (many variants released it: the most simple global custom component with flag.)
Then customize the existed ProductCatalogSimpleIndexingAdmin. Using one or another IOC and setting the flag in global custom component when index started. You can add some methods into your custom ProductCatalogSimpleIndexingAdmin like:
Execute baseline index for both IOC (one by one)
Execute baseline for IOC 1
Execute baseline for IOC 2.
Note: you should be afraid about incremental (partial) index in this configuration. But resolving conflicts in incremental index should be done after full implementation these changes.
Regards

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

I want to add hyperlink in the illustrator file and want the output in the PDF

I want to add hyperlinks in the illustrator file and want the output in the PDF.
I tried to add the multiple hyperlinks on the text and images in the illustrator by using the attribute panel but the links are not working in the published PDF.
Is there is any other method to create a hyperlink in the illustrator?
Can anybody help me out in this
Thanks

Interesting, Carlos.
There's another method by JET: Re: hyperlinks in Ai

// Code Help need .. in Reading CSV file and display the Output.

Hi All,
I am a new Bee in code and started learning code, I have stared with Console application and need your advice and suggestion.
I want to write a code which read the input from the CSV file and display the output in console application combination of first name and lastname append with the name of the collage in village
The example of CSV file is
Firstname,LastName
Happy,Coding
Learn,C#
I want to display the output as
HappyCodingXYZCollage
LearnC#XYXCollage
The below is the code I have tried so far.
// .Reading a CSV
var reader = new StreamReader(File.OpenRead(@"D:\Users\RajaVill\Desktop\C#\input.csv"));
List<string> listA = new List<string>();
while (!reader.EndOfStream)
var line = reader.ReadLine();
string[] values = line.Split(',');
listA.Add(values[0]);
listA.Add(values[1]);
listA.Add(values[2]);
// listB.Add(values[1]);
foreach (string str in listA)
//StreamWriter writer = new StreamWriter(File.OpenWrite(@"D:\\suman.txt"));
Console.WriteLine("the value is {0}", str);
Console.ReadLine();
Kindly advice and let me know, How to read the column header of the CSV file. so I can apply my logic the display combination of firstname,lastname and name of the collage
Best Regards,
Raja Village Sync
Beginer Coder

Very simple example:
var column1 = new List<string>();
var column2 = new List<string>();
using (var rd = new StreamReader("filename.csv"))
while (!rd.EndOfStream)
var splits = rd.ReadLine().Split(';');
column1.Add(splits[0]);
column2.Add(splits[1]);
// print column1
Console.WriteLine("Column 1:");
foreach (var element in column1)
Console.WriteLine(element);
// print column2
Console.WriteLine("Column 2:");
foreach (var element in column2)
Console.WriteLine(element);
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Script to search all files in specified folder for multiple string text values listed in a source file and output each match to one single results txt file

I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.

I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if

Reading text file and output (to stdout) a list of the unique words in the

Hi,
I have a main method as
main.java
package se.tmp;
public class Main
public static void main( String[] args )
WordAnalyzer.parse( args[0] );
and text file as
words.txt
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the requirement is like
I need create this WordAnalyzer class, implement the parse method, and then commit the file. This method takes a single parameter, the filename of the file to parse. The method should read this file and output (to stdout) a list of the unique words in the file along with the number of times each appears in the file.
Can anyone please help me on this?
Thanks.

Where are you having problems?

Is it possible to upload multiple files at the same time?

Hi folks,
It seems pretty trivial to implement a file upload item, but is there some way to allow selection (upload) of multiple files at the same time? Seems like this has probably come up before, but I didn't find much for solutions in my search. Any links or insight would be appreciated.
Thanks!
-Adam vonNieda

Thank you both for your replies.
@Manish - That does allow for multiple file uploads without refreshing the page, but does not allow for multiple file uploads at the same time.
@Tony - That might be the way I end up going, although I probably should have been more specific. It would be really nice it there was a way to do a mutli-file select using the control or shift button like you can with a standard file selection dialog (if you want to copy multiple files, for example). Having a separate line for each file browser means there has to be a limit on the number that can be selected at the same time.
Has anyone implemented a method of selecting multiple files at once, and hitting an upload button once to get them into the database?
Thanks again Manish and Tony, very helpful.
-Adam

Can I Save a Single .AI Document As Multiple Files, Seperated by the Page Tiling?

There must be a way to save or output a single Adobe Illustrator file into multiple files based on the "pages" I have created in the document?
For example, if I have tiled 10 tabloid-sized pages onto a single Illustrator CS3 .AI file, is it possible to save the file in a manner that will allow all of those tiled pages to be saved as a seperated or individual files?
I guess it would be a similar concept to how in newer versions (like CS4) you can export multiple jpegs of an illustrator file that contains several artboards and it automatically assigns a number suffix to the filename since multiple files were outputted from the single ai file.
Any help is MUCH appreciated. Thanks!

Please post your question in the Illustrator forum. This forum is for suite specific issues only.
Bob

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

Possible to sync multiple files and output the merged clips?

Similar Messages

Maybe you are looking for