Possible to turn on my G4 from remote?

I am running a sound recording studio and need to place all disks, computers and equipment making noise to a separate machine room.
Yhat includes my G4 mirror door. Is there a way to TURN ON the computer via usb or in another way? The mac is in network withmy laptop, can I start it from that machine?
I amnottalking about waking up from sleep, but from OFF.
Thankful for answer!
Oystein

I'd hope you've gotten cables by now,
but, if you're wanting to boot up a new computer to make sure what you have connected is working, here's a list of the VERY BARE MINIMUM needed before you press that on button:
Motherboard
Power Supply (PSU)
CPU
RAM
Power Button
the RAM is negatable, as you'll still get several beeps from the motherboard, letting you know it's saying "HEY!!! I WANT RAM!" Everything else not listed is 100% optional.
Now, to expand that list to make it a usable bare minimum:
keyboard
monitor
RAM
This will let you access the BIOS screen, set settings and basically make sure the motherboard, CPU and RAM all work.
add a floppy diskette drive (rememeber them??) and you can run some simple programs, memory tests, video tests, write documents, write programs, play games, keep account of your finances... YEP, that's how they did it back in the 80s - all on floppies
Everything else beyond that is just luxery! Man I'm glad i've got wifi in this computer
Hope this helps!
AeSix

Similar Messages

Is it possible to turn off the audio from a original video and add in the music later on using iMovie?

REPLY PLEASE?

This Apple iMovie Help article explains how to adjust audio (there are a number of other audio tutorials there as well):
http://help.apple.com/imovie/#mov81b2a077
John

Is it possible to turn an iphone on remotely

is it possible to turn an iphone on remotely?

If you mean turn your iPhone on (from the off state, shut down), no.
If you mean illuminate the screen (the phone already being on, by sending a notification via find my iphone, etc), yes.

I lost my phone and the location service is off. Is it possible to turn it on from another device?

I lost my phone and the location service is off. Is it possible to turn it on from another device?

No.

Is it possible to turn on location services on your iphone from a computer?

My iphone has been stolen and the location service is not on. I wonder if it's possible to turn it on somehow (maybe through icloud or something) so i can use find my iphone or track it somehow without using find my iphone. I have a lot of battery left still at least. How do I get it back? Any help please? I miss my baby

No, it's not possible to turn location services on remotely. Sorry.

HOw to delete files from remote server?

Hi,
I want to delete files from a directory on remote server.
I use the following command to delete on current server:
find $srcdir -mtime +90 -name "COR*.txt" -exec rm -f {} \;
Now, how can I delete files from remote server ?
Thanks!
Yogini

Some possible options:
1. There exists SSH implementation for Windows.
2. You can make a workaround. You can setup share for specific/wanted directory.
Then you can mount it on Linux machine and execute command localy and delete files "localy" in mounted directory.
3. You can setup FTP server on Windows machine and do that remotely via FTP commands.

Is it possible to call a 9i Forms from a 6i Forms ?

Hello,
I have a customer using CRM 11.5.10.2 ( Database 9.2.0.6 / 6i Forms) and will be created a functionality in the CRM screen, where end user will call (via button) a custom application running on 9i Forms.
Customer believes that there is a technical limitation to achieve that. That is, call a 9i Forms from a 6i Forms.
Is it possible to call a 9i Forms from a 6i Forms ?
Thank you in advanced for help,
Marcos Souza.

I should have thought so, as Forms 9i is exclusively web-driven, so how you launch the URL is immaterial as long as you use a supported browser. As your Forms 9i apps will invariably be on a remote web server, you'll not encounter compatibility issues either. And Forms 6 and 9 development is possible on the same PC using multiple Oracle Homes. Ask Oracle beforehand if you are still not convinced.

Is it possible to turn off a channel in DAQ?

I am using 4*PXI-6070E to acquire 64 channels simultanously. Is it possible to turn off one or several channels during acquisition? Which function or property node should I use? I have tried using property node "disable" in waveform graph but it seems didn't work. That channel is still running and the data is still here. Can anyone help me plz? THX a lot!

Once a set of channels are configured in a task and being acquired, you cannot reconfigure the task (add/remove channels) without stopping the running task
What you could do is to: Use array functions ( like index array) to create a subset of channels you require, from the set of channels being acquired

Reading .txt file from remote using abap?

Hi,
I must read a .txt file from remote server automatically.
I have path and name of .txt file. Remote system asks username and password.
In abap is it possible to give username and password for reading .txt from remote server?
Remote server and sap server are not in same domain.
How can i do that?
Thanks.

Hi Cemil ,
You can try using the FM RZL_READ_FILE_REMOTE_SH.
This is an option i found , but i have really not tried it out .
Regadrs
Arun

File Adapter to read from remote file server query

Hi all,
I want a SOA 11g application to read files on remote server using File Adapter. Is it possible to configure the File Adapter to read from remote location instead of locally. Is it possible. Is yes where can I find the associated remote file configuration documentation.
Thanks
Edited by: user5108636 on 19/09/2010 19:49

I also changed one more properties the FTP connection factory called serverType=win. I get bits and pieces in each document. Is there any working example to connect to an FTP server running on Windows using Ftp Adapter. Still not working.
These are the error logs related to it. Please suggest
####<Oct 12, 2010 1:17:22 PM EST> <Info> <Common> <server_name> <WLS_SOA> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <46e7c258a0e5cad6:-145e5cdb:12b99475c2b:-7ffd-0000000000046afa> <1286849842995> <BEA-000628> <Created "1" resources for pool "eis/Ftp/FtpAdapter", out of which "0" are available and "1" are unavailable.>\
[2010-10-12T12:56:07.142+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@170e13a9] [userId: weblogic] [ecid: 0000IiTsVSi9xWD_n91FiZ1CfLfc00006s,1:24709] [APP: soa-infra] [dcid: 46e7c258a0e5cad6:f9faea1:12b852b7f0f:-8000-00000000000005ed] FTP Adapter FetchAvlFiles Recovery still not possible after 1500 attempts due to javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/Ftp/FtpAdapter from JNDI and get a new Connection Handle.
Thanks
Edited by: user5108636 on 11/10/2010 19:05
Edited by: user5108636 on 11/10/2010 19:22

Connection from remote sites (Frame Relay WAN) to AS/400 dissapears

Hello,
We have the following problem appearing in our environment:
All connections from remote sites dissapears unexpected from AS/400. After 2-3 minutes remote users get normal connectivity again.
The environment is the the following:
Frame Relay/ATM WAN (Frame Relay on remote sites and ATM in datacenter) comes to Cisco 7204VXR router which connected to LAN switch with 10/100/1000 ports. AS/400 with Fast Ethernet interface also connected to the similar LAN switch. CEF is enabled on the router, IOS version 12.4.3a. We have ETHSTD *ALL parameter set on AS/400. Remote users uses TCP/IP and Telnet but there are a number of 5494 controllers wich uses SNA.
We got the problem for the first time after we enabled CEF on the router.
I suspect that the cause of problem is Ethernet frames of different standards due to ETHSTD *ALL, but can neither reproduce the problem nor understand why it behaves so.
Have anybody had similar problem?
I would be very thanksfull if somebody can help me to solve it.
Thank you in advance.
//Mikhail Galiulin

Hi Martin,
Cisco 7200 itself can access AS/400 as well as all other hosts in the same with AS/400 LAN. There is no any outage in communications which goes to another LAN segment via Netscreen firewall while the communication via Cisco is down. Only those hosts which connected via Cisco are experiencing the problem. I can not say where the traceroute from AS/400 stucks (there are other people who maintain the machine and they never could catch the exact moment of outage).
To turn off CEF I treat as the last option actually and unfortunatelly there is no guarantee that software upgrade will help (we have 12.4.3a now).
So first of all I'm trying to understan WHY it happens because I can not see any systematics in the problem appearance. It can happen 3 times under 2 days and then dissapear for 1-2 months...
//Mikhail Galiulin

Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?

Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?

What do "normal" AI prefs mean? AICB or PDF compliant? You might wanna try to turn off the latter....
Mylenium

Getting LONG RAW from remote database

Hi,
I have a table in my local database that has a LONG RAW column . I have another table of similar structure in a remote database (so it has LONG RAW as well). I would like to transfer data including LONG RAW data from the remote database into the local database table using PL/SQL. I know it is not possible to copy LONG RAW over dblink directly. Can anyone suggest an approach to accomplish this?
The local table cannot be changed to BLOB, but I have the flexibility to change the remote table to use BLOB. So, can anyone tell me if the following solution would work. If so, can you shed some light on what PL/SQL libraries to use or can you provide me with some sample code to implement steps 3 and 4 below?:
1. Change the remote table to use BLOB
2. Create a new temporary table with BLOB in the local database.
3. Copy data using PL/SQL from remote BLOB to local temporary table BLOB.
4. Copy data using PL/SQL from BLOB to LONG RAW within the local database from temporary table (w/ BLOB) to the actual target table (w/ LONG RAW).
I think step 3 can be a direct Insert-Select from remote table (I'll try this myself), but not sure how to go about step 4.
Thanks for your help.

There is a chapter in the Oracle Application Developer's Guide on calling external procedures
I don't know enough about VB and the available VB APIs to know for sure. I would assume that VB could be configured to generate a DLL with a C call specification. I would also assume that there was a VB API that would allow you to manipulate LONG RAW and BLOB data. Unfortunately, though, I don't know which VB API's have that functionality.
Justin

Can't call a VI from remote server

I have a VI running on a labview development machine(Labview 2010), the main function is handling excel report using report generator. I follow the link http://www.ni.com/white-paper/14469/en to set up labview machine and teststand machine respectly. But when I tried to call the VI from remote server, it is still not able to load the VI front panel and show the connectors. See the attachment. It looks like it still trying to load VI from local drive because it can't find the builded-in subvis for report generator function.
What should I do to make it work? Thanks!
Solved!
Go to Solution.
Attachments:
TestStand error.png ‏107 KB

For those interested in the solution, the problem turned out to be two things.
The first is if you want to be able to load a prototype of the VI in TestStand, you will need to either share the VI or create a dummy VI. If the shared VI uses subVIs you do not have access to, then you are better of creating a dummy VI that has matching connector panes.
The second problem had to do with how the remote VI path was specified. If you have shared the VI, then you will enter in the shared folder path as your remote VI path. If you have not shared it, then you will need to enter in the VI path as it is on the remote machine.
Rohama K.

Is it possible to export (expdp) oracle table from client machine ?

Is it possible to export (expdp*) oracle table from client machine, without using Remote desk top connection ?*
1) Database-10g server is in America
2) client machine is in India
3) Oracle client-10g software is installed in my machine
4) I am able to connect to the server, could see all tables
5) one table is with 35 million record, I wanted to export this table using data pump, is it possible?
note: without using Remort desk top connection.

Hi
I used the following syntax , but I am getting error
6) connect sys as sysdba
create directory test_dir as '/dbusr1/exp_test'
grant read, write on directory test_dir to user1;
7) expdp user1/pwd1@xyz tables=test_1 directory=test_dir dumpfile=test_file.dmp logfile=test_file.log
8) Errors
In linux prompt I am getting this error
-bash: expdp: command not found
In windows cmd prompt I am getting this error
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE";, line 488
ORA-29283: invalid file operation
9) why ?
-- Does the user ( "user1") should have any system level privilege ? to export his own table?
-- This folder ('/dbusr1/*exp_test'*) has write privilege in os level.
Thanks in advance
sbmk_design
Edited by: sbmk_design on Aug 24, 2009 12:06 AM

Possible to turn on my G4 from remote?

Similar Messages

Maybe you are looking for