Possible to uninstall ColdFusion MX 7 Updater (7.0.1)?
I've installed the ColdFusion MX 7 Updater (7.0.1) on a
staging server and everything worked/tested fine. Now I plan to
install it on the production server. Issue is the Network Admin
wants a rollback plan if (for whaterver reason) the updater bombs
the production server.
Can the updater be uninstalled after it is installed or what
other option do I have? Thanks.
> Can the updater be uninstalled after it is installed
I don't think you can or should. It fixes the server. Not
installing a hot fix increases the chances of the server bombing
>... what other option do I have?
I think the best option is Coldfusion MX7.0.2 + hot fixes
Similar Messages
-
The latest kit kat "improvements" have made using my phone much more frustrating. How can one roll back this operating system update to the previous version? If it is not possible to roll it back, how do I fix the following issues?
1) The battery timing has been greatly diminished.
2) Gmail isn't syncing properly. At least 7 times since the update, upon opening gmail, I see lists of messages that are sometimes over a year old, and not my current ones.
3) The sound slider bar on the open screen has disappeared. It now takes 4 steps in order to get into settings, and temporarily turn off the sound. That is ridiculous when entering a meeting. Not to mention that you have to repeat those steps upon the meeting's end.
4) Searching for a particular contact in people has become more complicated--much easier to select "m" when looking for Mary's info than to have to scroll through the very JITTERY and way too touch sensitive sidebar all the way to the "M's" to even begin to search through the M's. This is way too unwieldy.
5) Emoticon symbol has replaced the symbol to move to the next line in text messaging keyboard. I am not interested in childlike emoticons. I am interested in writing a coherent professional message with appropriate spacing.
Any suggestions will be greatly appreciated.You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??
-
Is it possible to Uninstall the latest ipod update?
I, like others on this board, made the mistake of trusting Apple to produce software that does no harm. Windows XP has a facility where you can go back to a restore point. Does anyone know of a Unix command that will do something similar? I was using my ipod as a hard drive and was booting from it. I was running 10.2.8. Recently, my primary user account became unusable, but I had another admin account that I was able to boot from. Since I used the ipod updater, my ipod (has 4 buttons) will not mount. I have tried it with 2 different G4 imacs and an old ibook(G3). System profiler sees it as a firewire device, but Disk Utility cannot see it. I did recently back it up, but I think everyone would really appreciate it, if Apple issued a bug fix. Go to the Apple store, and they will tell you to just buy a new one......
ipod Mac OS X (10.2.x)I fixed my ipod by hitting it. Not hard, but hard enough to move the platters. You do not have resort to reformatting, opening the case and shaking it, or sending it in for repair. Just hit it. If it's not working and out of warranty, you have nothing to lose....
-
Hello,
I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?I found this solution http://objcsharp.wordpress.com/2014/09/21/how-to-get-back-the-ios-7-sdk-after-up grading-to-xcode-6/
-
I GIVE UP! Is it possible to uninstall Leopard and go back to Tiger?
I am ready to give up for now. Is it possible to uninstall and go back to Tiger?
If you were wise you would consider other options just besides getting rid of Leopard and throwing it away. First, you could wait until Apple releases OS 10.5.1, then install and update to it. This might help take care of some problems. You could dual boot OS 10.4.10 and 10.5 as long as you have the OS 10.4 full install Disk and the OS 10.5 full install disk. I personally will wait until at least Christmas time before I install Leopard. New OS's are always full of bugs. On the Microsoft side, I've read where Windows Vista is still having major problems and is taking a long time to become widely used. These problems take time to fix. When Windows XP came out nobody would upgrade to it because of all it's bugs, now Windows XP is considered the standard on PCs. Mac OS 10.4 was also full of bugs at first, but now we talk about how rock solid it is. Simply give Apple time to fix these problems.
-
i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2,66 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 6 GB
Bus Speed: 1,33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10
Serial Number (system): CK7XXXXXXGP
Hardware UUID: 00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version: Mac OS X 10.7.5 (11G63)
Kernel Version: Darwin 11.4.2
Boot Volume: Macintosh HD(2)
Boot Mode: Normal
Computer Name: Mac Pro van Juko de Vries
User Name: Juko de Vries (jukodevries)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 11 days 20:39
Message was edited by HostJava 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties. -
Hello.
I'm currently running ColdFusion 9.0 on a Windows Server 2008 R2 machine. I need to uninstall ColdFusion altogether so that I may reinstall it. My ColdFusion came with an 'uninstall' directory, which contains the file "Uninstall Adobe ColdFusion 9.exe". However, when I try to run this program, I get a JVM error. I've tried running this program as adminstrator, as well as updating my JVM to the newest version (in the case that it was a version mismatch). This hasn't solved anything.
I then turned to the "Programs and Features" section of the control panel, where it shows an "Adobe ColdFusion 9" instance. But, when I try to uninstall here, I get the message "You do not have sufficient access to uninstall Adobe ColdFusion9. Please contact your system administrator." I am logged in as the administrator, and am able to uninstall other programs.
Any ideas or information would be greatly appreciated!
Thanks,Hi cfmcoder
Can you try to install the latest version of Java so that ColdFusion will not use the version which ship with it? After that, try to uninstall ColdFusion 10 and then let us know the status of this issue.
http://java.com/en/download/manual.jsp
Thanks
VJ -
Uninstalling the latest security updates?
I'm having a lot problems with my built-in iSight on BOTH of my iMacs. Is it possible to uninstall the latest update? If so, how?
Thanks for your help.
PatrickOnly by doing an Archive and Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
How can I uninstall the last Bluetooth Update
Hi,
Is there a way to uninstall the last Bluetooth Update dated June 19th version 2.1.6f8? Since I applied this update I have difficulties putting my computer to sleep. When I select the Sleep command the computer goes to sleep but then wakes immediately. The option "Allow Bluetooth devices to wake this computer" isn't checked. Before this update, I never had that problem which started minutes after applying this update.
I use both Apple wireless mouse and keyboard.
I wish I could revert to the previous version of the Bluetooth drivers because shutting down the computer instead of using the Sleep option isn't fun.
Am I the only one to have this problem?
Thank youKazon wrote:
To me there is no doubt that my problem is related to that BT Firmware update because I had never experienced that problem before (for months) and I've changed nothing except that update.
You should reserve a little doubt about the cause because your reasoning is an example of the Post Hoc Fallacy. (That doesn't mean it is the wrong conclusion, just that 'after this' alone isn't enough to be certain that 'because of this' is true.)
For example, a preexisting abnormal condition in your system that the update reveals could be the cause. This possibility must be considered if (as it seems to be true) others are not having any similar problem after the update or had the same problem before applying it.
Your plan to unpair your BT devices & to turn off the BT hardware is a good troubleshooting step, but it will not necessarily eliminate causes not directly related to the update because other problems that evidence themselves only when BT is active could cause the immediate wake issue. For example, some part of the BT hardware itself could be defective, causing it to be incompatible with the update.
I also have to point out that if you have applied any OS software updates in the last several months, then it isn't true that you have changed nothing, & you must also consider them & any effects they might have on a preexisting condition as possible causes, even if the effects have not manifested themselves until now.
In short, if everything wasn't in perfect shape before the firmware update, 'after this' isn't solid enough evidence to conclude that 'because of this' is true. -
Is it possible to "uninstall" the Technical Preview?
Simple as that, is it possible to uninstall the technical preview and go back to the previous setting?
As per the FAQ
Is there a problem you are needing help with?
http://windows.microsoft.com/en-us/windows/preview-faq#faq=tab0
If you want to go back to your previous operating system
You'll need to reinstall your version of Windows from the recovery or installation media that came with your PC (typically DVD media). If you don't have recovery media:
For Windows 7 or Windows Vista: Before you update, you might be able to create recovery media from a recovery partition on your PC using software provided by your PC manufacturer. Check the support section of your PC manufacturer's
website for more info.
For Windows 8.1 or Windows 8: You might be able to create a USB recovery drive. For more info, seehttp://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
Thanks, John Marlin Microsoft Server Beta Team -
Is it possible to uninstall yosemite and reload maverick
is it possible to uninstall the operating system yosemite, and reinstall the maverick operating system
If you were wise you would consider other options just besides getting rid of Leopard and throwing it away. First, you could wait until Apple releases OS 10.5.1, then install and update to it. This might help take care of some problems. You could dual boot OS 10.4.10 and 10.5 as long as you have the OS 10.4 full install Disk and the OS 10.5 full install disk. I personally will wait until at least Christmas time before I install Leopard. New OS's are always full of bugs. On the Microsoft side, I've read where Windows Vista is still having major problems and is taking a long time to become widely used. These problems take time to fix. When Windows XP came out nobody would upgrade to it because of all it's bugs, now Windows XP is considered the standard on PCs. Mac OS 10.4 was also full of bugs at first, but now we talk about how rock solid it is. Simply give Apple time to fix these problems.
-
TS1717 Is it possible to uninstall & reinstall iTunes and not have to redo all of my playlists etc.?
Is it possible to uninstall & reinstall iTunes and not have to redo all of my playlists etc.?
I updated iTunes and the installation failed and now I cannot open iTunes. The fix is to unistall and reinstall iTunes but I don't want to have to redo all of my playlists and things.Do not worry all your Data including Playlist, etc. will remain as it is.
Do the following:
Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.
Note : If you are unable to Remove Apple Mobile Device Support you can skip that. -
Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days agoThanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source. -
Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?
It does, under certain circumstances. If you are playing music and lock the phone or it locks on its own, when you wake it up, the album art will show. It also shows as the background if you are in the music app. If this is not exactly what you are looking for, you can submit feedback to Apple about this feature at www.apple.com/feedback.
-
Iphoto has recently stopped working; it continually shows the loading circle. I’ve uninstalled and reinstalled it,updated it and reinstalled all my apps with the ‘applications install DVD’ however it still does not work. I have also tried holding the command and option key while pressing iphoto then when the pop up appears i press the checkboxes that have been suggested by other users however nothing happens. Any other suggestions would be great!
Ok the program itself is likely fine, it's the files it depends on that are not.
Step #1
1: Open your Users/Library/Preferences folder (if on Lion you need to use the Go in Finder)
2: Scroll down until you see a file called
com.apple.iPhoto.plist
3: Trash it and reboot, start iPhoto and see if it works.
Step #2
1: Go to your Users/Pictures/iPhoto Library and right (or hold option) click on it and "show package contents"
2: Inside will be a folder with your originals, copy them out.
3: Move and rename the iPhotoLibrary file outside of the Pictures folder.
4: Reboot and restart iPhoto, check inside the Pictures folder if iPhotoLibrary was created.
5: Download ClamXav and run a scan on the Original photo's and your whole machine too while your at it.
(it's if there is a picture in there from Windows it could contain a corruption caused by malware)
6: Reimport the originals back into iPhoto.
See if those two steps resolve your issue, if not I could suspect next a network issue? Like iPhoto is trying to contact the internet and can't or gets hung?
You can can create another user, use the Shared Drop box to transfer files and log into the other user and see if it's a issue with just your User account, and if so you might just want to transisition over and then one day delete the old user and it's problems.
Please keep your Flash updated.
http://flashbuilder.eu/flash-player-version.html
Read my backup and restore etc., info here
https://discussions.apple.com/message/16276201#16276201
Maybe you are looking for
-
How do I add an entry to the auto correct spell check dictionary?
How do I add an entry to the auto-correct dictionary for spell check?
-
hi gurus, how to clear gl account when we cancel the order if the order has an advance(down payment), Moderator: Please, avoid asking basic questions
-
Is there any documentation in addition to the standard SDK documet? I have to challenges: 1. What LUA code do i use inside a typical "grid" to write seomthing to an external file ? 2. How can I change settings for the stahdard image files. For exampl
-
No Sound Played Through Ear Phone in Windows
Hi, I installed Mac & Windows on my iMac. I recently found out that In Windwos, I cannot here sound from my earphone when it's pluged in. The sound still comes out from the speakers. I do not know if it's the Windows setting. or if I should "download
-
Hi, Is there somebody who can tell me exactly how to configurate my skynet account om my Ipad? until this moment I was not able to find the right way. greetings, stijn