Possible to update Z77A GD65 bios with latest intel raid rom?

I was wondering how difficult it is to update the bios myself with the new intel beta rom?

Quote from: Daffy101 on 10-June-12, 00:29:04
I was wondering how difficult it is to update the bios myself with the new intel beta rom?
Try this one. It's based on the e7751ims.a43 with the following updated components:
1. intel me firmware 8.0.10.1464 (stock: 8.0.3.1427)
2. intel raid orom 11.1.0.1413 (stock: 11.0.0.1339)
3. sandy bridge microcode 0x28 (stock: 0x25)
4. ivy birdge microcode 0x12 (stock: 0x10)
I've NOT tested it because I don't have z77 motherboard but it should work fine. However I'll not be held responsible about any direct or indirect damages to (but not limited to) your board resulting from flashing and/or using this bios. USE IT AT YOUR OWN RISK!
The checksum of the modded file e7751ims-mod1.a43 is:
Code: [Select]
SHA-256: f420998b3dba8a3eb68afcafeeae8297ce279d3dbd95ae88296c35d1259d4fd8
hXXX://world-wide-web.sendspace.com/file/l539gt

Similar Messages

Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10 and 55 error

it is just a day with disaster. I bought Z77A-GD65 yesterday, and now it almost driver me crazy , i have two most famous problem of the board ,the CODE10 and ERROR 55!!!
after i bought this board to home ,i spend few hour to figure out the reason why the system can not be booted.
the DIMM SLOT 3&4 of my board is malfunction,no matter what combination i use (1&3,2&3, 3&4...etc),but it works for 1 and 2(i have 4 ram sticks,all of them is fine)
i do upgrade to BIOS 10.5(thx god ,i have two computer ,otherwise i cant even do it because of following issue)
after i solve the problem by only plug in 2 ram (DIMM1&2), succeed to boot up, a new problem occurred to me ,the CODE10!
latest driver , clean system install ,cmos cleaned, does not help.
i have read this thread for code10
https://forum-en.msi.com/index.php?topic=158591.msg1167303#msg1167303
and for error55
https://forum-en.msi.com/index.php?topic=158224.0
it seems the best way to solve it is RMA.
I notice that there is an Authorized Motherboard Repair Center (East Coast):
361 Alden Road
Markham, Ontario, L3R 3L
i live in Toronto, can i just go there and give the board to them to fix it or i can only mail it?
If i need to mail it ,what should i do?

Code 10 means the device cannot start. You have the right driver for the Intel 82579V is shorted by either a motherboard screw or a raiser under it. The ethernet adapter has lights which light up id driver is installed (even though code 10 is in effect).
Solution: Remove 1 or 2 motherboard screws and turn the pc on. Repeat until you find out which screw caused the issue. For me it was the screw closest to the ethernet controller.
The wa i fixed it was I was used a plastic washer and I was still able to have the motherboard screw in and at the same time not get code 10 anymore and my Intel 82579V worked fine since.

Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10

Hi,
on a fresh install of Windows 7 64bit i cannot make the Ethernet port on the motherboard work. It installs fine, but when i check device manager i see this message:
This device cannot start. (Code 10)
I downloaded the latest driver, but still no change.
Looking in device manager, i noticed that the driver Windows had selected was Intel 82579LM, so i reinstalled the driver, and forced 82579V driver, but still no change. I assumed this must be a defect motherboard, so i rma'd it, and got a new one....with the same problem!!!
So any ideas with to do ?

Quote from: Warner on 11-May-12, 04:10:22
Hello kaizerman,
Are you in the US?
Can you send the motherboard to me directly for analysis?
If needed, I will replace the board for you through RMA service.
Please email me at [email protected] but be sure to put my name in the subject field and your board model so it will come to me correctly.
Sincerely,
Warner
Hi Warner
Thanks for the reply. Unfortunately i'm not not in the US, i'm in In South Africa. Ive tried pro17 with no success... currently its showing the 82579V driver. but no still has the cannot start error code 10. I cant understand why it was working for a few days. then suddenly stopped. i made no hardware or software changes.
regards
Utterly perturbed

Z77A-GD65 issues with Geforce GTX 780 Video Card

Hey Guys,
I have a issue with a new PC build.
I think it may be a driver or BIOS setting issue, I hope
I bought a MSI Z77A-GD65 motherboard and below are the specs:
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8
- Balistix Sport 8GB sticks (Total of 24 GB memory installed)
- Kentek 875w power supply
- Geforce GTX 780 Graphics Card
My problem is with the Geforce GTX 780 video card, I installed a fresh install of Windows 7 64 bit and
everything runs and works fine,but when i install the Geforce GTX 780 video card and install the
drivers its all good up to this point but when i restart the computer i get this message in the device
manager ""Windows has stopped this device because it has reported problems (code 43)"
I have installed different versions of the driver, a few older and few newer versions with the same
outcome.
I tried to flash the BIOS to the latest version 10.11 but had problems with it picking up my harddrive
after it flashed successfully. I even checked the boot up setting and it all looked good just would not
boot up, so i had to revert back to the v10.8 BIOS version for it to work.
I'm not sure if there is a setting in the BIOS that i need to turn on or off. I'm not familar with this BIOS,
is there a place in it so i can see if the BIOS is picking up the video card, it has to or Windows would
not see it right?
I'm stumped here, do you guys know of a Geforce driver version that works well with this video card?
I truely think the card is fine because when i install the card to the motherboard i dont get any weird
issues until the driver is installed and Windows is restarted.
I would greatly appreciate any help and advise that you guys can give me.
Thanks alot

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

MOVED: Z77A-GD65 issues with Geforce GTX 780 Video Card

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=177652.0

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

Z77a-gd65 bios/ram

good day to everyone.
first of all here is my spec:
i5 3570k
16Gb (4x4) Corsair vengeance 1600Mhz CL9
z77a-gd65
bios 10.10
problem nr.1
i can't make RAM working faster than default-1333.
i read lot of forums, where ppl able to do changes from 1333 to 1600. but i can not.
problem nr2.
it was only AUTO in timing (few month ago i was able to change numbers. i did nothing with bios, it just became AUTO by itself)
my i5 was working @ 0Mhz !!!
fixed by downgrading bios
i'm wondering... should be number like here?
is anybody can help me? how to make RAM working @1600 and more?
will be nice to receive step-by-step guide (better in pictures)
thank you
ps. sorry for not super English

Quote from: xmad on 24-October-13, 03:24:41
Remove and re-seat all of the components outside of the case on a non-conductive surface. While the cpu is removed, inspect the cpu socket for any bent or mis aligned pins.
Perform a full cmos clear and re-test with only a single stick of ram in DIMM 2, cpu, cooler and psu.
...now my pc is in non stop restart... lol. all i wanted its only make ram 1600.
done. i switched off oc genie and change settings in "standrd" mode. all 4 sticks of ram are working together.
thank you for help.

I have just updated my iPhone 4 with latest IOS 7 and now wi fi greyed out and Bluetooth not working. Tried reset, restore everything - no use. Its out of warranty too. I refuse to pay for a new phone when clearly this is an apple issue not phone issue.

Can anyone help? I updated my iPhone 4 with latest iOS 7 and now wi fi is greyed out, Bluetooth won't work and tbh am so angry! Phone now out of warranty so apple won't help without it costing me. Don't want to pay as its an apple problem not phone problem. It worked ok before. Tried everything, even clearing it down. Can't even back it up now unless I connect to a pc!

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?

My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?

Hi sayla,
When you reloaded your software did you do a clean reload (deleting all data)? http://bbry.lv/bpv7DT
If so, you might try doing a resettofactory using the following instructions. http://bit.ly/fMW9I4 This will reset to factory default.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

HT4623 hi, i tried updating my iphone IOS with latest update. I download latest update and then went tried to install. It shut down phone & asked me to connect to itunes. i didnt backup, will i lose my data.. havent connected to itune, waiting for suggest

Hi, i tried updating my iPhone IOS with latest sw update. I download latest update and then tried to install it. This immediately shut down my iPhone & the icon on screen showed iTune logo & data cable. I havent connected to iTunes yet as i want to know how to backup my data on phone before i complete the update process on iTunes. waiting for suggestions. Thanks

If you are now seeing a screen with the USB cable and an iTunes logo, you'll need to connect your iPhone to a computer with iTunes installed, provided the data on your iPhone hasn't already been lost it should back-up once it's connected in iTunes.
Regards,
Steve

Cannot update Bios through Live Update (Z77A-GD65)

I've been trying to update the Bios from A.00 to A.B0. I've tried it a few times but when I scan for updates it will always say that my current Bios is A.00 and the online version is A.B0. I'm trying to get this update in the hope that it will fix my problem installing my new Graphic Card.

Don't use LiveUpdate! If it tries updating your bios you have a high chance of bricking the board. Download bios versions from here or the product site and manually flash (and never in Windows).
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. After booting from the prepared USB stick afterwards it will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Z77A-GD65 Drivers>>>

Disabling the live/multi update in the z77a-gd65 bios

I see a lot of stuff saying to use the board's bios app to update the bios. BUT I see nothing about disabling the bios update in the bios utility of the mb's bios.
How to disable the auto-"update". It happened again today where turning the power on, the screen goes blank, reboots showing multi-bios updating & not to turn the power off. The problem this is the 2nd time & the bios "update" is from my 10.5 to 10.3B4; so is there a difference & is 10.3B4 really the "latest" bios version....From the reading I've seen so far, is that one needed to have the bios on a fat/fat32 drive which I don't have as a hard drive; I do have fat32 flash drives which weren't even plugged in when the bios got changed!
What happened? The bios update wasn't within windows as the boot process never got that far.

1: your computer could have downloaded last time it was on a BIOS update via live update if installed and flashe 1 chip but not the other and the board was trying to flash the 2nd with the same bios on the other chip!
2: could be you have had a corupted BIOS chip and the board was trying to flash the bios from the other chip to the defective one!
is your computer working fine now?
do you have live update on your computer? (if its working remove live update as its got a 50/50 chance of corrupting your bios if it messes it up)
ps: do a CMOS clear >>Clear CMOS Guide<<

Z77A-GD65 BIOS recovery

I attempted to update the BIOS to rev A8 (previous version was A6) using M-Flash.
The update failed and the board no longer boots from BIOS A
Switching to BIOS B lets the board boot properly.
How can I repair the A BIOS ?
System Config is :
MB: Z77A-GD65 (MS-7751)
CPU: QuadCore Intel Core i7-3770K, 3700 MHz (37 x 100) at stock frequency
RAM: 4 x G Skill F3-1600C9-8GAR (32451 Mo (DDR3-1333 DDR3 SDRAM) for system memory (32 GB minus HD4000 video memory))
Graphic card: None
Hard disks: 4 x WDC WD1002FAEX-00Z3A0 ATA Device (1000 Go, 7200 RPM, SATA-III) (2 of them are attached to the Z77 chipset and configured as RAID 0, the other ones are attached to the AS-Media controller and configured as Windows 8 Striped volume)
Sound card: None (Integrated audio chipset is used)
OS: Windows 8 Pro + Media center

https://forum-en.msi.com/index.php?topic=160450.0

Z77a-gd65 bios

Do I need to flash bios for sandy bridge or is it just if I want to install ivy bridge I have I5 2500k shop said no
But people on line say you do which one is right thanks

this is my current bios
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in 08/02/2013 at 23:37:57.77
Mainboard: Z77A-GD65 (MS-7751)
PCB Version: 2.0
BIOS Version: VA.0 (aka Version: V10.0)
BIOS Date: 02/08/2012
and the one i think iam going to install is
Re: [Z77A-GD65] BETA UEFI Version [E7751IMS.Axx Releases]
E7751IMS.A81 ==> E7751IMS.A82
Changelog removed, no publishing outside beta section
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.
E7751IMSvA82.rar (5342.88 kB - downloaded 55 times.)
i take it this includes intel me and then i just download drivers from msi web site am i correct about this before i attemp it cheers

I have atempted to update my ipad 1 with latest update but after extracting software it goes to restoring ipad software and stops at around 25% on the bar. have tried several times but it does the same I have one useless ipad at the moment ! any ideas ?

I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?

when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?

[SOLVED] P67A-GD65 mainboard missing Intel RAID Rom after updating BIOS

I use 2 HDDs to build a RAID 0 array using Intel P67 RAID driver. I've just updated the BIOS to the 1.I version, and after that my computer can't boot up, showing the message "Missing Operating System". I booted into DOS and failed to read my hard disk, combining with that the Intel Matrix Storage Manager Option ROM didn't show up during the POST (which prompts me to press Ctrl-I to enter the RAID configuration before I updated the BIOS), I think it's the Intel RAID driver's problem. However, the Marvell RAID's prompt still shows, so the Marvell RAID should still work well. I encountered the same problem the last time I updated the BIOS, but I forgot how I got it well again... Please help. Thanks a lot!
I didn't noticed that my BIOS settings had been reset after I updated the BIOS, so I should manually changed the SATA mode to RAID. I was required to run a system recovery after I set the SATA mode back to RAID since the system failed to load, and Windows re-installed the USB3.0 driver after the first boot after the update (I don't know why this is). And the problem solved. Hope this is helpful to guys have similar problem as me.

Please post the full system specs.
>>Posting Guide<<

Possible to update Z77A GD65 bios with latest intel raid rom?

Similar Messages

Maybe you are looking for