Possible to use 2 AEBS to remove the 802.11g bottleneck?

I have a Sony PS3 and lately I have noticed when playing Call of Duty 4 that I will see an enemy, shoot them, they don't die, they shoot me, and I'm dead. Upon replay, they see a totally different story. They see only me coming around the corner, no shots fired, and they have an easy shot.
I have Road Runner and consistently get 14.5-15Mbit down and 750Kbps up. I am connected from the modem to my AEBS, and then 802.11g from that to the PS3. I've opened ports on the airport, restarted, etc... nothing seems to fix it. I am thinking that the latency from going from PS3 to AEBS to the game server may be the issue??
The AEBS and PS3 are 2 floors apart, so running a gigabit cable between them isn't an option - but what about getting another 802.11n AEBS and hooking the PS3 up to that via gigabit? So the network would then go cable to AEBS -> 802.11n ->AEBS ->gigabit ethernet ->PS3
Would this help, or hurt?

This might help but it's difficult to say without knowing absolutely where the latency was occurring. You might consider moving the PS3 temporarily just for testing purposes to see if you can reduce latency by plugging directly into the AEBS. If that works, then it's reasonable to consider adding another one. You would also need to make sure that you didn't have any G devices connected if you wanted the best results.

Similar Messages

  • Is it possible to use different iOS devices with the same account of the gamecenter?

    Is it possible to use different iOS devices with the same account of the gamecenter? in that case, can two people play a game with the same account and add both scores to the same leaderboard nickname?

    You should be able to use the same account. The top scores will get updated on the leader board.
    Taz

  • Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

    Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

    In Jabber for Windows 10.6, you can change the ring tones.

  • I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

    I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

    I thought yes, more like this on the right says no. Why not take the two devices outside and try.

  • Is it possible to use a USB aircard on the 11" MacBook?

    Is it possible to use a USB aircard on the 11" MacBook Air?

    No, the superdrive works only with Mac that don't have an optical superdrive built in in the first place.
    However, if you have a newer Mac that could support the SuperDrive or another computer (Mac or PC) which has an optical drive, you could use this: DVD or CD sharing: Using Remote Disc - Apple Support

  • It is possible to use jmf without to install the JMF library?

    Hello it is possible to use jmf without to install the JMF library
    in windows or linux machine
    but inserting these library in a jar for java web start?
    thanks

    I have have inserted the library in the my files jar but i have this error
    java.lang.UnsatisfiedLinkError: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
         at com.sun.media.JMFSecurityManager.loadLibrary(JMFSecurityManager.java:206)
         at com.sun.media.protocol.vfw.VFWCapture.<clinit>(VFWCapture.java:19)

  • I have a dualband Airport Express. Why is my Macbook air default connecting to the 802.11g network instead of the n one?

    I'm using a dualband Airport Express:
    http://www.apple.com/airport-express/specs/
    Recently, I've noticed that my wi-fi speeds vary alot. I went into About this Mac---> System info -----> system report and went to wi-fi. Turns out it says my current configuration is on the 802.11g network. Under other connections, it lists my identical wi-fi as 802.11n.
    How can i make it connect to the 802.11n connection by default?
    Much appreciated,

    G-band networks generally will have a stronger signal than n-band.
    Tell it to ignore the g network and only connect to the N-band network.
    Open Network System Prefs, select WiFi, and click Advanced...
    Click on the WiFi tab.
    Find you g-band network in the list and delete it.
    Check the box to Remember networks this computer has joined.

  • Using exchange2003 on iPad and iPhone. Is it possible to use agenda on iMac via the cloud?

    I am using exchange2003 on iPad and iPhone. Is it possible to use same agenda and contacts on iMac 10.7.2?

    Hi jeris529,
    As Niel has suggested, you should not use a non standard disk in your slot loading iMac.
    Further information about disk compatibility or usage can be found in the Apple Knowledge Base Article "Using nonstandard discs in optical drives".
    hope that helps some,
    littleshoulders

  • Is it possible to use  one imac to control the screen of another?

    Hi,
    I'm thinking of buying a new iMac. At present I have an older intel iMac (1.83, 17 inch, 2 Gigs ram, 250 hd) and I work mainly with Logic Pro 8. Logic Pro 8 has a node function which allows you to use the processing power of a second computer to enhance the processing power of the primary computer. My present iMac in my new setup would be the node computer to the new iMac. I already know I can use the processing power of my present computer but can I also use it's display? In other words can I use the new iMac to control the old iMac's screen? Thanks

    One thing I'd caution you on, Logic node uses resources over an ethernet connection, which this screen sharing application also appears to be transmitted over. Using this screen sharing app, the internet, or any other networking application on the Logic Node computer will affect the amount of bandwidth available to Logic Node, reducing the amount of performance you get by having the second "node" computer hooked up.
    It's possible that it may not be very noticeable, but I'd definitely do a test with and without the screen sharing app to see how far you can push it.
    I'm curious to see if this works well, I wouldn't mind using my PC laptop for a second monitor.

  • Is it possible to use SCCP and SIP at the same time?

    Our CCM is using v9.1 and all of our phones are SCCP. We are looking at a conference room phone that runs SIP. Would it be possible to use this in our current setup?

    Hi @bobdchambers,
    That's totally fine. They both co-exist in the same environment but make sure to not configure the same extension in different models because if you dial an extension that is configured in a SCCP phone and a SIP phone, just the SCCP phone rings.
    HTH.
    Rgrds,
    Martin, IT Specialist

  • Is it possible to use an mSata drive as the primary drive?

    Greeting everyone,
    I recently bought an HP ENVY Phoenix 810 whiich comes with the MS-7826 (Kaili) motherboard which has an mSata slot with a 16gb msata ssd in it, but it's only being used as a cache. So my question is, is it possible to use the mSata drive as as the main bootable drive along with 3 other hard drives? I'm planning to install a 256 msata ssd along with 3 4tb hd, but want to use the msata as the main one. Is it possible, if so how?
    I've come across a few forums where they were having problems with the same thing where they were able to use it as the main drive but as soon as they installed the original bootable drive they system will not boot since the drive didn't have an operating system installed in it and it wont boot from the mSata even though the os was installed onto the mSata. Any ideas?
    Thanks in advance.

    JCCR510, welcome to the forum.
    The mSATA drive in the computer can only be used as cache and not as a boot drive.  This is the way that HP has it setup.
    You certainly can buy a SATA SSD and install it.  As you can see in my signature below, I have Samsung EVO 840 SSD in my 810-135qe.  It works great.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How to use Group Policy to remove the shutdown button on the logon screen

    Environment:  Shared use computers running Window 7 Professional and MS office Suite; Windows 2008 Standard server, Windows 7 EC Domain Policy and MS Office 2007 ADML Template downloaded from Microsoft. WIndows 7 Accounts OU.
    I am in the process of developing a shared use computer lockdown policy for several Windows 7 computers that will made available in my client's computer lab.  I need to use a group policy setting to remove the Shut Down button on
    the logon screen of the Windows 7 client computers.  I am editing the Windows 7 EC Domain Policy to user accounts in a Windows 7 Accounts OU that I created.  I am using the Group Policy editor in the Group Policy Management Console.  
    Please let me know the best practice for accomplishing this using Group Policy editor.
    Thanks.
    P.S. I tried a setting recommended in the following link in the Windows 7 EC Domain Policy which did not seem to work.
    http://www.windowsitpro.com/article/group-policy/can-i-use-group-policy-to-display-or-remove-the-shut-down-button-on-the-logon-screen-.aspx

    Hi Vernon,
    I tried the group policy you mentioned (Computer Configuration, Windows Settings, Security Settings, Local Policies, and select Security Options, "Shutdown: Allow system to be shut down without having to log on") and it worked on a Windows 7 client.
    Thus you may need to check if the group policy you created is actually applied to clients.
    A screenshot can be found here:
    http://cid-b7ed40feb32ba29f.office.live.com/self.aspx/.Public/desktop/Capture.JPG

  • Is it possible to use cursors and zooming in the plotxy function that outputs pictures?

    I use the plot multi xy function in my vi that outputs a picture. And I wonder if it is possible to use cursors and zooming with this output picture?
    Thanks,
    Ogulcan Kaya

    Hi Ogulcan,
    it is, but not as straightforward as with standard graphs.
    As a starting point take a look at the example shipped with LV: Modified Smith Plot with Zooming.vi; you find it in picture examples.
    Good luck,
    Alberto

  • Is it possible to use SCOM 2012 R2 with the new Azure Managment Pack to monitor Aure Wadlog Events for azure sdk 2.5

    My operations team has been using MOM 2007 and has recently migrated to SCOM 2012 R2.
    Till now we are using Monitoring Pack management packs which were released way earlier (https://www.microsoft.com/en-us/download/details.aspx?id=11324),
    and had a dependency on diagonstics connection string being present in the cscfg of Azure package.
    This pack was allowing us to monitor the wad logs and events generated by applications.
    However we plan to move to newer Azure managemen pack (http://www.microsoft.com/en-us/download/details.aspx?id=38414), which allows for discoverability.
    I have 2 questions -
    Is it possible to monitor Diagonstics Event Log with the new Monitoring Pack released on 10/2014 ? Or will the users still require the earlier pack for monitoring diagnostics installed in parallel ?
    Azure SDK 2.5 got rid of diagonstics connection string. Is there any possible way to Monitor of Azure Diagonstics wadlogs using SCOM 2012 R2
    Thanks,
    Pratush

    Hi Pratush,
    I would like to suggest you go through the management pack guide to get details. And you should be able to create custom monitor to monitor event logs for Azure.
    Hope the below links be helpful for you regarding to monitoring Azure:
    How to monitor your Windows Azure application with System Center 2012 (Part 2)
    http://blogs.technet.com/b/dcaro/archive/2012/05/03/how-to-monitor-your-windows-azure-application-with-system-center-2012-part-2.aspx
    Windows Azure and SCOM 2012
    https://social.msdn.microsoft.com/Forums/azure/en-US/ecb409e2-8595-40e8-9a73-757b670b06db/windows-azure-and-scom-2012?forum=windowsazuremanagement
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Is it possible to use super domain account in the server to remove the file's irm setting when I upload a irm-enabled file?

    We often need to send files downloaded from irm-enabled libraries of sharepoint to our clients who have no access to our rms server enviroment  via e-mail or OA. Now we have to remove these files' irm setting  mannually using the account who
    have overall control rights to this files, and then send these files to our cilent via email or OA (Upload to OA and use OA's delivery system). I want to know is it possible to automatically remove irm setting when uploading files to OA. 

    Hello Tolab,
    I'd suggest asking SharePoint specific questions on the
    SharePoint 2013 - Development and Programming  forum instead.

Maybe you are looking for

  • How to copy line items from one expense report to the next

    I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry. Is ther

  • VirtualBox kernel 2.6.29 patch[SOLVED]

    Hi, I'm trying to build VirtualBox from AUR. I tried to apply the patch as instructed, got an error: Verifying archive integrity... MD5 checksums are OK. All good. patch: **** Can't open patch file /home/me/sandbox/abs/virtualbox_bin/src/virtualbox-k

  • I can`t stream a dvd-movie to my apple tv, why?

    On imac it works. as soon i use airplay, the screen gets grey. i can see the whole screen on the apple tv. only the movie window is grey.

  • GRC PC3.0 Task name in work inbox = WI Text - cannot access the task detail

    Hi all We are using PC 3.0 -ECC6 has been upgraded to 6.05 We cannot access PC tasks from the work inbox - this is true for all the users We can view the task - task name = WI TEXT Cannot click on the object name to get to task details Your help will

  • Report footer

    can any one please guide me how to adda filed say "date" o soem text filed in a report footer. through Scripting only.<BR>thanks for hte help