Possible to use Audio In and Out simultaneously?

Is there any additional adaptor/gadget that I can purchase so that both the Audio In and Out features of the audio jack can be simultaneously?
For example, so that Audio In can be used to record an external source input while the Audio Out is piped to a headphone to monitor the recording?
Thanks!

Air has a headset jack.
You can use a splitter
Mics should be USB capable for best results, almost all headset mics are junk quality.
then monitoring or listening thru the headphones
consider using a PRO MIC , such as an Audio Technica AT2020 USB
http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1390776580&sr=8-1&keywords=at2020+usb
or better still use one of these with pro XLR mics:
http://www.amazon.com/Focusrite-2i2-USB-Recording-Interface/dp/B005OZE9SA/ref=sr _1_1?ie=UTF8&qid=1390776526&sr=8-1&keywords=2i2

Similar Messages

Is it possible to do the audio capture and playback simultaneously?

In short :
Is it possible to do the audio capture and playback simultaneously? . If it is not supported directly by Sun, pl suggest another way to achieve the same.
In detail:
I am doing a voice chat application by using the streaming through UDP . I am able to play the byte stream. But , is it possible to capture sound simultaneously (while playing the audio) to send to the other end?
Edited by: dhillarun on Jan 4, 2008 7:11 AM

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

Fade audio in and out throughout a clip

Is thre any way to fade audio in and out throughout a clip, so say for example I want to fade it back just when someone is talking etc? it used to be so easy in previous imovies!

Audio in iMovie 09 is a pain. In order to do this, you have 2 choices...
1. Your clip must have a video fade effect of some kind then go into precision editor, select to see audio from the waveform button near the middle right of the screen and then slide the audio (without effecting picture) either earlier or later.
2. You can Split your clip in multiple places, lets say 6. Then double click on each of them in turn, moving the audio level lower and lower until you get to the part of the split clip that will be zero. In order no to have the edit point sound cut, either set the auto fade to be manual/zero, or go into precision editor and overlap the audio edit points slightly.
Message was edited by: Michele Gardner

Audio IN and OUT messed up - how to diagnose??

I've got a weird issue and wondering if anyone can help. I have a Mac Pro and yesterday got a good mic and a pre-amp for my son to do some recording on GarageBand. I also installed the CuBase software that came with the pre-amp. The audio in and out is very erratic. Sometimes it will record, and sometimes not. And it will not playback properly (yes, I double-checked my Output/Input settings in System Preferences).
The same problem is happening on the CuBase software (which is GarageBand on steroids).
HOWEVER, when I fire up iTunes, all my existing MP3s come out of the speakers (line out) and headphone jack just fine.
Anyone know if there are potential conflicts between the system and audio editing software? Or perhaps it's the sound chip on the motherboard?
Related question: Can you add a sound card to a Mac Pro? I know the chip is soldered to the motherboard, but wondering if I can bypass that by adding a sound card?
Thanks for any help.

I haven't spent much time with Garage Band and I haven't used Cubase since OS9..
But there may be settings right in the DAW software that sets the default ins/outs as opposed to having your system settings control where the audio goes..
Another thing to take a look at is Audio MIDI Setup in the Utilities folder. It displays the system sound settings in a bit more detail...
Currently, there might be 1 or 2 PCI-express "sound cards" out there, but your best bet would be to look for a USB or, preferably, a Firewire audio interface. There are many of these out there with a large range in pricing..
If you are getting serious about recording, you may want to look at some of the small format mixers which include a USB or FW output. The advantage of these small mixers is that they are like swiss army knives for audio.. they allow you to route and mix audio in all kinds of ways that you would never imagine until you actually need it.. Some include digital effects, usually some EQ on every channel, from 2-16 mic pres, etc
Another route, again if you are getting more serious, is to get a ProTools LE or M-Powered setup. This way you are getting "Industry Standard" recording software along with a selection of different audio interfaces to choose from depending on your needs..
Apple Logic is also Pro-Level Software for a great price, especially at the current pricing.. You still need an interface, though, to get the most out of it.
Browse around the computer recording section at www.sweetwater.com to get a good idea of what's involved..

Audio in and out

using both audio in and out in late 2009 macbook

cdj connect the input audio for Ableton Live, and audio output for ampificador

Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

Nevermind. I figured it out.

It is no longer possible to use ALT + N and ALT + P from the "get info" window.

On a PC, previously, when in the "get info" windows, it was possible to use ALT + N and ALT + P to switch to the song information for the next and previous song. Since the update to the newest iTunes, it's no longer possible. Has anybody found a keyboard shortcut that works? The "keyboard shortcut" thing in iTunes says you can still use ALT + N, but it doesn't seem to be working for me. Is it working for anybody else?

You're welcome.
tt2

When use scan mode and FPGA simultaneously, why does the FIFO Read can not be used?

Hello, I am using compactRIO-9025 to do a project and trying to use scan mode and FPGA simultaneously ( Hybrid mode). I have already build a project as the following tutorial.
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690 and I have NI 9205, NI 9023 in Scan mode and NI 9871 in FPGA mode in the same project.
In the FPGA Target of the project, I add a FIFO and tried to use it to log in data from NI 9871. I wired the module I/O node to FIFO Write in the target vi. However, when I droped the invoke method to the block diagram of the host vi and right clicked it, there is no FIFO Read can be choose. Could you please help me to solve this problem?
Thank you very much!!

I am not aware that using the Scan Engine is blocking any access to a transfer FIFO. But please reread this from your quoted KB:
Secondly, the number of DMA FIFO's that can be used in the FPGA code will be reduced, since the scan engine uses two DMA FIFO's. Most FPGAs have 3 DMA FIFO's, so there will only be one DMA channel left to use in the FPGA code.
This means, you have only a single DMA FIFO left which is either Target to Host or Host to Target.
Make sure that you configured the FIFO to be the correct direction for your needs...
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Possible to use audio line out and in simultaneously ?

In the current version of MacBook Pro Retina is it possible to use the analog audio line out and line in both simultaneously ? That is playback as well as record analog audio at the same time.
Does anyone know what is the audio hardward platform (Codec, DAC, ADC, etc..) in this machine ?
Thanks!

Air has a headset jack.
You can use a splitter
Mics should be USB capable for best results, almost all headset mics are junk quality.
then monitoring or listening thru the headphones
consider using a PRO MIC , such as an Audio Technica AT2020 USB
http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1390776580&sr=8-1&keywords=at2020+usb
or better still use one of these with pro XLR mics:
http://www.amazon.com/Focusrite-2i2-USB-Recording-Interface/dp/B005OZE9SA/ref=sr _1_1?ie=UTF8&qid=1390776526&sr=8-1&keywords=2i2

Is it possible to use a CompactDAQ and NI-DAQmx in the TPC-2212 with Windows 7 Embedded System?

Hi,
I would like to develop a application with the TPC-2212 (Touch panel computer) and a CompactDaq System (NI9237 - 4-Channel, ±25 mV/V, 24-Bit Simultaneous Bridge Module).
Is it possible or I should use a panel pc?
Thanks.
Solved!
Go to Solution.

This thread is a bit old, but I thought it would be worth while responding (as I was wondering the same thing a day ago).
The answer to the OP's concern(s) is YES, you can install DAQmx on your Windows 7 embedded TPC-2212 touch panel device while connecting to your cDAQ hardware. YES, it will function (depending on your memory constraints). DAQmx BASE is NOT a requirement (which, to me, seems very ambiguous if you're referring to NI's documentation for the LabVIEW Touch Panel Module).
My confusion began when it seemed using the Touch Panel Module for the 2212 was a requirement, not an option. If one proceeds with this assumption, then referring to the TPM documentation:
http://www.ni.com/pdf/manuals/371940d.pdf
NOTE: this link above is to an older version, but the content itself (also installed locally with the TPM in \\manuals\TPC_Getting_Started.pdf) remains relatively unchanged.
Section "Installing Additional Tools" clearly states "You must install additional tools on the target depending on the functionality you need." Immediately following is the installation procedures for DAQmx Base. You'll see the same statement in the LabVIEW help files that get installed with the TPM on your development machine. Nowhere does it state, for Windows Embedded, that it's possible to use DAQmx itself.
Because DAQmx is a bit of a heavy weight, you'll probably want to go with the Runtime (with MAX) as I did:
Search for 'NI DAQmx Run-Time Engine - Configuration with MAX'. I would have posted a link, but NI's site was down for maintenance at the time of this post.
Connect to your 2212 over a network connection (I just used a cross over cable and connected directly). Create a shared directory and copy the downloaded installer on over - install. You could, of course, download direct if your 2212 is already networked with web access.
I have my test station application running beautifully with an attached (USB) cDAQ chassis loaded with a variety of modules.
I hope this post is as useful for somebody else as it would have been for me.
-Chris
Kod Integrations, LLC
Sr Software and Automation Engineer
Certified LabVIEW Architect
Kod Integrations, LLC
http://www.kodintegrations.com

Using Belkin Wireless and AX simultaneously?

Greetings
I've just connected up a new AX unit and found it painless to connect to the stereo using AirTunes. Brilliant so far.
Now I'm not even sure if whether it is possible but I want to be able to do the following:
1. Receive Internet from Belkin wireless unit (G-router, F5D7230-4 with ADSL broadband)
and simultaneously
2. Use AX to play music using iTunes.
Is it possible to do this? If so, how do I go about changing settings. I've had a look in the discussion forum but can't see a reference to a question like this.
A friend who uses Linux says it's probably possible to use ifconfig in terminal, but he doesn't know how.
Any help welcome.
Cheers, Stephen

Yep, worked through this one and found an answer - I missed a step first time round.

New clips automatically fade audio in and out?

When I add a clip from an event to the project there is automatically a fade in and out for the audio which I do not want. I checked under project properties but still couldn't find anything useful to turn this off. Any ideas?

You can select all of your clips (by clicking one and using command A) and then manually chage the fade in and out for all of them at the same time in the inspector. That is how I do it but I do wish that I could find a setting to turn off the fade in and out effect, just the same as you.

Is delegation of a calendar possible on using Office 365 and any client whatsoever on Mac?

I am looking for any way for OS X users to use Office 365's exchange calendaring service to delegate / share a calendar with another user on Office 365.
I have researched the MS knowledge base which states that for delegation, you need both an Exchange server (which I presume Office 365 is) and either Outlook 2010 or 2013 - neither of which run on OS X. If I have to, I could get to these software to temporarily
sign in and set up the delegation, but I don't want to run Windows day in and day out and need a native OS X solution.
Short of running Windows virtually day to day, can OS X users use delegation features of Office 365?

I am looking for any way for OS X users to use Office 365's exchange calendaring service to delegate / share a calendar with another user on Office 365.
This article should help:
https://support.office.com/en-gb/article/Add-and-manage-your-delegates-e250ea79-755d-463f-a506-31f55092338b
But... I'd expect that this will only work if both the mailboxes are within the same O365 tenant (since delegation is really a backend-server feature, which requires a common security/directory, and that's only possible within a single tenant, and not across
tenants AFAIK)
For the hosted/webservice aspects of O365, the dedicated O365 forums are best:
http://community.office365.com/en-us/f/default.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Possible to use Airport Extr and Express for WIRED Guest Network?

Situation and landscape:
My house has a Comcast cable-modem, which is connected to an Airport Extreme (AEx).
The AEx is running WPA WiFi, and this is all good.
There is one ethernet wire running out of the AEx, which goes 150 feet to the rear of my house, across a short corridor (protected from weather with insulated pipe) and into my garage apartment, where it terminates into an Airport Express (APress.)   This garage apartment is frequently used as part of a rental property. The APress is extending the same WiFi SSID/settings.
When guests arrive, they are able to plug-in their notebook computers to the APress ethernet port, or use the WiFi.
Well, the problem with that, obviously, is that they can "see" the other computers on the network, and printers, etc.
It would be perfect to set configure the AEx and APress to the WiFi "guest network." However, there are problems with this:
1) Believe it or not, many guests still use direct-plug and do not have nor know how to set up their WiFi -- so they MUST have a direct ethernet wire.
2) When I use Airport Utility for the APress, it does not show any WiFi guest network option -- maybe because another dependent setting is not allowing this (i.e. Bridge Mode?")
3) The distance between the AEx and this garage apartment is too long between them to shoot a WiFi guest network from AEx and to be picked-up by the Airport Express... and there's a center core in my old house that is impervious to all radio frequencies and could block a nuclear blast. Well, it causes a degradation of wireless.   And this brings us back to #1 above...in that I need a cable ethernet option.
Picture attached of current landscape:
So, maybe....
I've spent the better part of a couple of hours searching here, particularly for the terms "access point" but the terminology isn't what I need. What I wonder if perhaps I need to place an APress beside the AEx, turn on Guest Network at the AEx, then "pick it up" with a second APress, and carry the ethernet signal to the garage apartment and allow guest WiFi and wired. (see second picture)   Will this work?

OK, here how to set this up.
Open up AirPort Utility 5.6.1, select the Express, and click Manual Setup
Click the Wireless tab located below the icons
If you want the Guest Network to have a different SSID (recommended), then change the name of the wireless network, adjust the security settings if needed, and change the Wireless Password and Verify
Click the Internet icon up at the top of the window
Click the Internet Connection tab just below the icons
Change the setting for Connection Sharing to Share a public IP address
Click the DHCP tab located under the icons
Change the DHCP Beginning Address to read something different.....like 10.0.5.2
Click Update and give the Express a full minute to restart
At this point, the Express indicator light will be slowly blinking amber
Open up AirPort Utility again, select the Express and click directly on the word Status (2nd line)
You should see a Double NAT notice with an option to "ignore" the item
There may also be an Setup over WAN notice with an option to "ignore" the item
Click in the boxes to ignore both items, then click Update again and the Express will restart and display a green light
Try things out to verify that the Guest Network cannot "see" any devices on the main network...and vice versa.

Possible to use Audio In and Out simultaneously?

Similar Messages

Maybe you are looking for