Possible to use both PowerPC and Intel-based systems together with Qmaster?

Hello,
New to the Qmaster setup, I was wondering if it was possible to set up a Qmaster cluster mixing PowerPC and Intel-based systems. If it is possible, what version of Qmaster would support this type of cluster?

While it can work, note that if there is huge difference is processing speed, the PPC machine can actually slow down the process as everything waits for it to finish it's instance and copy it back.
It's worth a try but keep an eye on how the various computers perform.
Have fun.
x

Similar Messages

Is there a partition scheme for both powerpc and intel-based macs?

I need to partition a drive to back up using time machine from two different Macs: one is powerpc and one is intel but disk utility seems to only allow you to choose on or the other.
this is the disk utility option:
Select a new partition scheme:
* Use Apple Partition Map partition scheme if the disk will be used with Time Machine and a PowerPC-based Mac.
* Use GUID partition scheme if the disk will be used with Time Machine and a Intel-based Mac.

silvrmn wrote:
unfortunately i am alternating them between computers.
is there a way to make it work or is the only solution to get two different drives and format them accordingly?
TM will most likely work fine with both computers if you partition the drive GUID. that's been the experience of most people who do it. but apple does recommend partitioning the TM drive GUID for backing up intel macs and APM for PPC ones.
using GUID is unlikely to create problems but it may.
but if you want safety on this you'll need two separate drives.

PowerPC and Intel based USB Drive

Is it possible to have a startup disk for both PowerPC and intel based Macs on the same USB disk?

A PowerPC can't boot from USB drives. It can be done with a FireWire drive. Partition with the Apple Partition Scheme, install PPC Tiger on one partition. Cone Tiger from an Intel Mac onto the other partition. Either Mac can boot from a disk with the Apple Partition scheme, but the Intel Macs cannot install or update it.

Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?

I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
Is it possible to install both Tabular and Multidimentional to same physical server?
Is it possible that some Power View reports use tabular and others multidimentional?
Could above requirement work in production environment? Anybody tried?
Kenny_I

Hi Kenny_I,
According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
on the environment.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Is it possible to use both thumbnails and swipe in a multistate?

I'm producing a document for iPad using the Digital Publishing beta, and I've set up a multistate slideshow, navigable by thumbnail images. I enabled the swipe advance, and now the thumbnails don't work. Is it possible to have both, or does one cancel out the other? Thanks!

Oops
It's looks like impossible
http://www.unicode.org/unicode/faq/font_keyboard.html#2

Apple Releases Security Update 2006-004 (PowerPC and Intel)

From Macfixit................
Apple has released Security Update 2006-004 for Mac OS X in both PowerPC and Intel versions. This update requires Mac OS X 10.4.7 for either PowerPC or Intel, Mac OS X 10.3.9 or Mac OS X 10.3.9 Server.
This is the fourth major standalone security update for Mac OS X released this year.
Update procedure recommendation First, avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. In addition, before installing this security update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying the update (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted.
Enhancements in this release
Of most interest to general end-users:
a fix that prevents maliciously crafted Zip archives from causing condition where arbitrary code can be execute. In other words, prior to Security Update 2006-004 you could download a specially crafted file ending in .zip from a Web site or other location, and it could trigger the execution of malicious code.
a fix that disallows maliciously crafted Canon RAW images from creating a buffer overflow, potentially leading to arbitrary code execution. Prior to Security Update 2006-004, you could download or otherwise receive a Canon RAW file that could allow execution of malicious code on your system.
similar to the above, a fix that prevents maliciously crafted GIF images from causing an integer overflow, potentially leading to arbitrary code execution.
new download validation that will catch certain HTML files defined by Safari as "safe" that may actually contain malicious JavaScript code. After applying Security Update 2006-004, these files will not be automatically opened.
Protection against maliciously crafted HTML documents that can also open the door for arbitrary code execution by accessing deallocated objects.
A full list of enhancements is as follows:
AFP Server
An issue in the AFP server allows search results to include files and folders for which the user performing the search has no access. This may lead to information disclosure if the names themselves are sensitive information. If the permissions of the items allow it, the contents may also be accessible. This update addresses the issue in Mac OS X v10.3.9 by ensuring that search results only include items for which the user is authorized. For Mac OS X v10.4 systems, the issue was addressed in Mac OS X v10.4.7. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9:
The AFP server contains an integer overflow that can be triggered by an authenticated user. A malicious user with access to the AFP server may be able to cause a denial of service attack or arbitrary code execution with system privileges. The AFP server is not enabled by default on Mac OS X. This update addresses the issue by performing additional validation. Credit to Dino Dai Zovi of Matasano Security for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
On Mac OS X Server, the AFP server supports reconnection of file sharing sessions after a network outage. The storage of reconnect keys is world-readable. It may be possible for an authenticated local user to read the reconnect keys, use them to impersonate another user over AFP, and access files or folders with the privileges of the impersonated user. This update addresses the issue by protecting the reconnect keys with appropriate file system permissions. This issue only affects Mac OS X Server. Available for: Mac OS X Server v10.3.9, Mac OS X Server v10.4.7.
An unchecked error condition exists in the AFP server that may lead to a crash. By carefully crafting an invalid AFP request, an attacker may be able to trigger this condition and cause a denial of service. This update addresses the issue by handling the formerly unchecked error condition. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bluetooth
The security of the Bluetooth Setup Assistant has been improved in this update for Mac OS X v10.4.7. The length of the automatically generated passkey used for pairing has been increased from six characters to eight characters. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bom
An issue in Bom's compression state handling may cause heap corruption. By carefully crafting a corrupt Zip archive and persuading a victim to open it, an attacker may be able to trigger this condition which could lead to an application crash or arbitrary code execution. Note that Safari will automatically open archives when "Open `safe' files after downloading" is enabled. This update addresses the issue by properly handling such malformed Zip archives. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
DHCP
A stack buffer overflow exists in bootpd's request processing. By carefully crafting a malicious BOOTP request, a remote attacker may be able to trigger the overflow and cause arbitrary code execution with the privileges of the system. Note that bootpd is not enabled by default in Mac OS X, and must be manually configured in order to be enabled. This update addresses the issue by performing additional bounds checking. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
dyld
Malicious local system users may specify dynamic linker options that cause output to standard error. This output contains informational content and potentially user-specified content. As a result, privileged applications that parse or reuse standard error may be influenced inappropriately. This update addresses the issue by ignoring the problematic dynamic linker options in privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
An improperly handled condition in the dynamic linker may lead to including dangerous paths when searching for libraries to load into privileged applications. As a result, malicious local users may cause the dynamic linker to load and execute arbitrary code with elevated privileges. This update addresses the issue by properly selecting search paths when executing privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
fetchmail
Several issues in the fetchmail utility were discovered. The most serious issue could lead to arbitrary code execution when fetching mail from a malicious POP3 mail server. All issues are described at the fetchmail website (fetchmail.berlios.de). This update addresses the issues by updating fetchmail to version 6.3.4. In addition, fetchmail is no longer distributed as a privileged utility. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
gunzip
A race condition may allow a malicious local user to modify the permissions of files owned by another user executing gunzip. This issue is only exploitable when executing gunzip on files in directories that are modifiable by other users. This update addresses the issue by properly handling files while decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
A directory traversal vulnerability is present in the command line utility gunzip when it is used with the non-default "-N" option. By carefully crafting a malicious compressed file and persuading a user to open it with "gunzip -N", an attacker may replace or create arbitrary files with the privileges of the victim. This update addresses the issue by properly stripping paths from files when decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Image RAW
By carefully crafting a corrupt Canon RAW image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Canon RAW images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
ImageIO
By carefully crafting a corrupt Radiance image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Radiance images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
By carefully crafting a corrupt GIF image, an attacker can trigger an undetected memory allocation failure which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
By carefully crafting a corrupt GIF image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
LaunchServices
Download Validation may erroneously identify certain files containing HTML as "safe". If such a file is downloaded in Safari and Safari's "Open `safe' files after downloading" option is enabled, the HTML document will automatically be opened from a local URI. This would allow any JavaScript code embedded in the document to bypass access restrictions normally imposed on remote content. This update provides additional checks to identify potentially malicious file types so that they are not automatically opened. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
OpenSSH
Attempting to log in to an OpenSSH server ("Remote Login") using a nonexistent account causes the authentication process to hang. An attacker can exploit this behavior to detect the existence of a particular account. A large number of such attempts may lead to a denial of service. This update addresses the issue by properly handling attempted logins by nonexistent users. This issue does not affect systems prior to Mac OS X v10.4. Credit to Rob Middleton of the Centenary Institute (Sydney, Australia) for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
telnet
When connected to a TELNET server, the client may send the contents of arbitrary environment variables to the server if the server requests them. Some environment variables may contain sensitive information that should not be sent over the network. This update addresses the issue by ensuring that only non-sensitive variables and variables that the user has explicitly requested are are shared with the server. Credit to Gael Delalleau and iDEFENSE for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
WebKit
A maliciously-crafted HTML document could cause a previously deallocated object to be accessed. This may lead to an application crash or arbitrary code execution. This update addresses the issue by properly handling such documents. Credit to Jesse Ruderman of Mozilla Corporation for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
AppKit, ImageIO
Buffer overflows were discovered in TIFF tag handling (CVE-2006-3459, CVE-2006-3465), the TIFF PixarLog decoder (CVE-2006-3461), and the TIFF NeXT RLE decoder (CVE-2006-3462). By carefully crafting a corrupt TIFF image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of TIFF images. Systems prior to Mac OS X v10.4 are affected only by the TIFF NeXT RLE decoder issue (CVE-2006-3462). Credit to Tavis Ormandy, Google Security Team for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7./

Right after installing Security Update 2006-004 (Intel) on my macbook pro I am having troubles with my wireless connectivity. Here is the dump from the console:
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
I can reboot and it will work, but if I put my macbook to sleep it, when I wake it, it will do the same thing again.
I am also getting timeouts waiting for results of 1st wireless scan to complete in console.
Anyone else having this issue?
MBP15-2GHZ Mac OS X (10.4.7)

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Using both Parallel and Bootcamp

Hi,
I was wondering if it's possible to have both Parallel and Bootcamp.
For my Macbook Pro Retina, I plan to install Windows 7 using Bootcamp to run Solidworks.
But I also want to have Parallel to switch back and forth to quickly do different tasks other than CAD.
Is it possible to have both with one Windows 7 product key?
If having both is possible, how do I do it and which one do I install first, Bootcamp or Parallels?
Thank you in advance

1. It is possible to use both Parallels and Bootcamp.
2. It requires reactivating the Windows side with the same product key.
3. Install Bootcamp first, then Parallels.
4. Please see http://kb.parallels.com/en/112941 for the necessary steps after Bootcamp is installed.

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

Can I use both Wifi and a Lan connection at the same time?

With me back in the dorms I have been limited to a slower connection than what I would like. Now we are able to use both Wifi and a Lan line so I was wondering to somewhat "double" my speed if there was any way to use both connections at the same time.
Now I know that you can have both plugged in at the same time, I guess what I'm asking is, is there a way that I could set programs to use one or the other? Or some kind of virtual desktop that is set to use the other connection or anything that would allow both be used at the same time.
Or am I just wishing for something that doesn't have any possible way to work?
-nathan
MacBook pro 2.16 C2D 2gb ram Mac OS X (10.4.8)

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

HT4736 Taking too long (2 minutes) to locate and download photos into Photo '11 9.5 (902.7 build running on an older Intel based MacBook Pro with iPhoto libraries on a USB2 External HD). I checked and repaired HD permissions. Any ideas?

Regarding iPhoto '11 9.5 (902.7 build running on an older Intel based MacBook Pro with iPhoto libraries on a USB2 External HD). I am dealing with iPhoto taking too long to download photos. Specifically, I rechecked and repaired HD permissions. I am running the most current software my five year old Intel MacBook Pro can run. What happens is that when I connect an external SD card, or my iPhone, the new version of iPhoto takes up to two full minutes to fully acknowledge the device. Then locate new photos and be ready to download them to my external HD. I am kind of concerned about this. This has never happened before.
I take 20,000 photos a year. I really don't want to lose any. Or is there something I am doing wrong? Or need to be aware of? Any experienced suggestions would be appreciated. Thanks. Have a great day.
PS.... The cameras I use are Canon SX-30, Nikon D3100, and my iPhone 4S. Thanks again for your assistance.

Hello Old Toad.... Those sound like great ideas.
I thought I checked and repaired disk permissions on my main boot HD. That boot disk is Mac OS Extended (Journaled) Capacity 749.3 GB. Available 562.53 GB. BUT.... now that I think of it.... the Seagate external HD with USB2 interface is: Mac OS Extended (Journaled), Capacity 639.79 GB, Available 36.2 GB with my latest iPhoto Library 517.37 GB that was already scanned & updated to be read by the latest iPhoto version.
I'll try your suggestions tonight as far as double checking 'permissions' and setting up a tiny test library.
Or maybe it's time to fill up another External HD?
I appreciate your and anyone else's suggestions to try.
Have a great day. ~~ David in Rochester NY

Linking Access tables, creating a query with using both Access and Oracle

Hello,
I am using 3.0.04.34 version Oracle Developer. I am supposed to create a script/procedure to use both Access tables and oracle tables together. There is an option in developer to copy the access tables into oracle. But it doesn't help me. Because when we updated the access tables
the copied ones are not be updated. How can I created a linked access tables to oracle and create a query with using both access and oracle table together.
I will appreciate if you guys help me. I look forward to hearing from you guys.
Thanks,
Pinar

Pinar,
to be able to query MS Access tables in Oracle you need an additional product, the Oracle Database Gateway for ODBC. It allows you to link any foreign database into an Oracle database using a suitable ODBC driver. You can then access the MS Access tables through a database link based on the Database Gateway for ODBC. This will also allow you to join local Oracle and remote MS Access tables from your Oracle database.
There's a note on My Oracle Support which gives you more details:Document 233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases - For example - DB2, SQL*Server, Sybase, Informix, Teradata, MySQL
And there's also a dedicated Forum: Heterogeneous Connectivity

Does anyone use both iPhoto and Aperture

I just got an mac book pro and I am trying to decide what to do with my iPhoto library that is on my old G4 eMac. I'm wondering if the best (and safest) plan would be to transfer that library to the new machine, bring it into iPhoto and then import the entire library into Aperture.
On second thought I wondered if it would be a good idea to leave everything in iPhoto and just open images in Aperture only when I want the extra editing tools... using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
And... is it even possible to import the library from another machine directly into Aperture?
Thanks in advance,
bd

Pick one and stick with it. They don't actually integrate very much.
Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
So if you decide to try this:
using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
You'll end up using two apps to manage two different sets of photos, with twice the complications. Aperture is not an "external editor" and can't be used as such.
Think: Writing your novel in Word and TextEdit at the same time. "I'll write this chapter in Word, this paragraph in TE and then back to word..."
What of you wanted to sync your Photos back to your Phone? Which library will you use? You can't use both.
And... is it even possible to import the library from another machine directly into Aperture?
The routine would be to move the Library to the new machine and them process it into Aperture. Then trash the unwanted iPhoto Library.
Regards
TD

Using both aperture and iphoto

is there a way to use both aperture and iphoto without duplicating all the pictures? can I just point aperture to the iphoto folder with my pictures? i would like to use both, but don't want to have to duplicate all of my pictures, my hard drive can't handle my heavy shutter finger twice over.

Fundamentally our need/pain drives our determination of the best solution.
iPhoto is great as you say for integration cross iLife, basic photo management and basic edits.
Once you start to use Aperture with any volume of photos, it rapidly dawns on you how basic iPhoto is. I have tried both, and used iPhoto from iLife 04 onwards. iPhoto becomes unwieldly when you start throwing 100, 200, 500 or a 1,000 images at it. Compares and selects, sorting on different metadata, all slicker than iPhoto. But when it comes to image adjustments, there really is no comparison. Highlights/Shadows, Levels with quarter points, spot/patch controls ... smoothing, etc. To say nothing of seeing your original and modified(s) side by side. Or how about non-destructive crops so you can create the best possible presentation of the object with the overall image? Organization and navigational structure? Built in backup (Vaults) so that it is easy to back up. Yes, I'm sold on Aperture and that's why I now export just my finished (keepers) results back to iPhoto and not the other way around.
As your volumes grow, and your experience with Aperture grows, I'm sure you will start to reconsider.
Have fun.
G.

Using both Picasa and Aperture

I am looking for help so I can use both Picasa and Aperture on the same Mac. I am using Picasa on my Mac and have all my photo and video files stored on a Time Capsule under a folder called "Pictures." I set Picasa to "watch" these folders for new files and changes.
I have installed a trial version of Aperture and would like to see if I can use both it and Picasa on the same machine. I would like to keep my photos on the Time Capsule (I have about 300 gb of files, so I don't want to put them on my 500gb drive on the Mac), so I created a Aperture Library on the Time Capsule. As a test, I imported one subfolder (about 20 files) from the Pictures folder and noticed that Aperture made copies of each of these files. Is there a way to set things up so that I keep a single copy of each file without making the duplicates? Thanks.

Two things you should keep in mind:
The Aperture Library itself should not be located on a network volume (e.g. Time Capsule), see:
Aperture: Use locally mounted Mac OS X Extended volumes for your Aperture library: http://support.apple.com/kb/TS3252
You can however store the master image files on a network volume, e.g. in your Pictures Folder on TIme Capsule.
In the import panel of Aperture it is possible to specify, that the imported image files should be left in their current location:
This way you could share the master image files (not the edited versions) with Picasa, provided you do not alter the shared files in any way.
But frankly, I do not see any reason to do this - Picasa would be very much redundant - to keep both programs synched propery will give you more trouble than benefits. If you only want to use the Picasa web albums, then you can do that by exporting or using the Picasa plug-in from Aperture.
Perhaps you may care to elaborate a little on what exactly you want to achieve by using both programs simultaniously.
Regards
Léonie

Possible to use both PowerPC and Intel-based systems together with Qmaster?

Similar Messages

Maybe you are looking for